8318 REPAIRS MAINTENANCE OF PUMP MOTORS SUMERSIBLE PUMPS INCLUDING REWINDING AT NAVAL DOCKYARD UNDER GE NW KUNJALI MUMBAI

Amount

Disconnecting horizontal split casing pump of any make/model, dismantling and taking out pump shaft assembly complete for replacement of pump bearing DE or NDE replacement of pump gasket including greasing the pumpset connecting to coupling testing & commissioning complete all as specified and directed for following sizes / capacities of pump :-

Pump coupled with 50/60/75 HP motor suitable of bearing Make : SKF/NBC or equivalent as approved by GE

Pump coupled with 40/ HP motor bearing . Make : SKF or equivalent as approved by GE

Pump coupled with 30/35 HP motor bearing Make SKF or equivalent as approved by GE

Pump coupled with 25/15 HP motor bearing Make SKF or equivalent as approved by GE

Pump coupled with 7.5/5 HP motor bearing Make SKF or equivalent as approved by GE

Pump coupled with 10 HP motor bearing Make : SKF or equivalent as approved by GE

Pump coupled with 5 HP motor bearing Make : SKF or equivalent as approved by GE Note :- Rates deemed to be included for decoupling and coupling pump with motor.

S&F in repair DE/NDE bearing including necessary greasing reassemble the motor connect, testing and commissioning complete for following capacity motors :-

Motor capacity 75/50/60 HP bearing Make : SKF or equivalent as approved by GE

Motor capacity 40 HP bearing Make : SKF or equivalent as approved by GE

Motor capacity 30/25 HP bearing No 6318 Make : SKF or equivalent as approved by GE

Motor capacity 15 HP bearing No 314 Make : SKF or equivalent as approved by GE

Motor capacity 3/7.5 HP bearing No 6313 Make : SKF or equivalent as approved by GE

Motor capcity 5 HP bearing No 6310 Make - SKF or equivalent as approved by GE

M & L in repair replacement of rubber coupling of size as per Existing including testing. Make : FENNER/ FINOLEX or equivalent as approved by GE

S&F in repair pressure gauge 150 mm dia range 0-10 kg/Sqcm , Make : FIEBIG Note : Rate quoted deemed to be included for providing adopter/Ferrule/check nut etc required for fixing of pressure guage.

S&F in repair MS coupling suitable to 60/50 HP pumps at various installations.

All as per item No. 5 above but suitable for 40HP/20HP/10HP.

Disconnecting LT cables of various sizes from electric motor of different capacities and decoupling from the pumping sets , removing and taking down carefully and transporting to authorised workshop for rewinding strip opening and dismantling complete rotor and stator assemby , cutting ;and taking out old burnt copper winding from the stator assembly and cleaning the slots of stor with carbon tetra chloride solution .Material and labour for rewinding complete stator assembly with and including super enamelled copper winding wire of suitable gauge machine with existing .Applying the minimum two coats of insulation varnish and keeping the stator assembly in heating chamber to improve for insulation value. Assemblyling the motor , transporting to site of worik, coupled with the pumping sets allingments properly , connecting the LT cables and testing and commissioning complete of the following capacity of Electric Motors :

(a) 60/75 HP Capacity

(b) 50 HP Capacity

(c) 40 HP Capacity

(d) 30/25 HP Capacity

(e) 15/20 HP Capacity

(f) 5/7.5/10 HP Capacity

S&F in repair/replacement of main contactor suitable for following capacity of motors including taking down old one :-

75/60 HP motor, MNX 95, 3 pole, 415V, 50 Hz Make :L&T/Havells/Siemens

40/50 HP motor, MNX 70, 3 pole, 415V, 50 Hz Make :L&T/Havells/Siemens

S&F in repair/replacement of over load relay 40/50 HP motor , Relay range (35-50A) 415V, 50 Hz Make :L&T/Havells/Siemens

S&F in repair/replacement of MCCBs fixed in existing panel board Make : L&T/Siemens/Legrand including taking down old one :-

MCCB 3 Phase (TP) 200A 50Hz, 35 KA

MCCB 3 Phase (TP) 100A 50Hz, 25 KA

MCCB 3 Phase (TP) 63A 50Hz, 25 KA

M & L for replacement of unserviceable shaft sleeves for following cap pump sets :-

Suitable for 75/50/60 HP

Suitable for 40/30 HP

Suitable for 15/ 20/25 HP

Suitable for 10/7.5HP

M & L for replacement of unserviceable impeller as per existing suitable for following cap pump sets :-

Suitable for 75/50/60 HP

Suitable for 40/30 HP

Suitable for 15/ 20/25 HP

Suitable for 10/7.5HP

M & L for replacement of unserviceable air release valve made out of Stainless steel of any size / cap of pump set::- Note :- Rates for replacement of gaskets, nuts, bolts, washers, etc are deemed to be included in the item rate.

Supply anf fix in repair direct on line (DOL) starter 3 phase 415 Volts up to 05 HP capacity.Make :L&T/Siemens/Legrand

Material and labour for repairing and brazing wherever required with copper rod for rotor assembly of the following capacities of motor including grinding, cleaning, varnishing and testing complete all as specified and directed.

75/60/50 HP Electric motor

40 HP Electric motor

30 HP Electric motor

20/25 HP Pump set

15 HP Pump set

7.5/10 HP Electric motor

Material and labour for repairing, metal filling, turning and grinding on lathe machine shafts of the following capacity pump sets complete all as specified and directed.

75/60/50 HP Electric motor

40 HP Pump set

30 HP Pump set

20/25 HP Pump set

15 HP Pump set

7.5/10 HP Pump set

M&l for bacteriological and chemical analysis of water sample at M/S Italab Private Limited Mumbai/Govt approved lab (ISO 9001:2008) Note :- (a) The water sample should be carried in sterlized bottle/water can . (b) The rate quoted shall be deemed to include transportation and testing charges complete. (c) Test certificate of the lab be submitted in duplicate to department.

M&L for replacement of gland packing suitable for pump set 200 HP to 10 HP complete with removing worn out gland, cleaning etc. Make:-Champion.

Supply and fix in repair/replacement of Star Delta Starter for 40 HP Motor, 415V, 50 Hz Make :L&T/Siemens/Legrand

Supply and fix in repair/replacement of Star Delta Starter for 30 HP Motor, 415V, 50 Hz Make :L&T/Siemens/Legrand

Supply and fix in repair/replacement of Star Delta Starter for 20 HP Motor, 415V, 50 Hz Make :L&T/Siemens/Legrand

Supply and fix in repair/replacement of Star Delta Starter for 15 HP Motor, 415V, 50 Hz Make :L&T/Siemens/Legrand

Taking down and dismantling centrifugal pump sets of following capacity installed at various water supply installations for servicing/overhauling , greasing and replacement of worn out parts which shall be measured and paid separately under the relevant items of Sch `A' :-

M & L for run lead joint in repair with pig lead including pumping out / bail out water and necessary excavation and earth work in any type of soil,to repair the joints for following sizes of pipes :-

300 mm bore

200 mm bore

150 mm bore

100 mm bore

M & L for Cutting existing cast iron pipes and reducing for insertion of CI fittings to required length in position for following sizes :-

300 mm bore

150 mm bore

100 mm bore

200 mm bore

S&F in repair sluice valves flanged end, cast iron body, flanged and drilled and non rising type brass spindle with nut, long body, class P N 16, conforing to IS 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed of make sant, kirloskar, kartar and of following size.

300 mm bore

250mm bore

200 mm bore

150 mm bore

100 mm bore

M & L for Construction of brick masonery valve chamber in repair of size 1.2 x 1.2 x 1.2 M (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, 15mm thick, finished even and smooth, without using extra cement, 5 mm thick plate cover on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified.

Supply, lay/fix, connect and testing steel water taking, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS-1239 and fixed to wall/ceiling or laid in trenches/floors complete all as specified and directed by the Engineer-in-Charge. Make - TATA, Swastik, Jindal, Prakash, Surya

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

S&F gunmetal gate valve, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc and any addition / alteration required for fixing, as fixed in repairs complete all as specified and as directed by the Engineer-in-charge of the following diameter: Make: Kirloskar, Leader, Boss, Zoloto, Rotex

40 mm bore

50 mm bore

80 mm bore

25 mm bore

20 mm bore

15 mm bore

Supply only cast iron pipes with spigot and socket centrifugally cast class `LA' in any length laid in trenches of following sizes. MAKE:-LAMCO INDUSTRIES LTD/ ELECTRO STEEL

(a) 300mm bore

(b) 200mm bore

(c) 150mm bore

(d) 100mm bore

(e) 80mm bore

.S&F in repair MS plate cover 5mm thick of valve chamber,under groundsump/ over head tank, including necessary fabrication work with hinges, handle and applying two coats of synthetic enamel paint over one coat of Redoxide complete all as specified.

Taking down corroded MS sections and S&F angle iron frame of size 50 x 50 x 6 mm of valve chamber, over head tank, UG sump including necessary fabrication work with two coats of synthetic enamel paint over a coat of Redoxide complete all as specified

Supply only ALTOCH-GP high strength calcium based granular disinfectant for chlorination of water. Make : Shreerayalseema or equivalent.

Supply and installed water level indicator on water sump with complete fitting like couter weight,rope , float,nut bolts etc all as specified and directed by Engineer -in -charge.

S& F in repair 1& 2 HP Moboblock pump,3phase, 440volts all as directed and specified.

S & F in repair 5hp submersible openwell pump, 3phase, 440volts all as sdirected and specified

Material and labour for preperation of steel/iron surface of old painted surface of any description over 10 cm width or girth, not otherwise described, painting one coat with red oxide zinc chrome paint and 2 coat with synthetic enamel paint (ordinary tint) complete all as specified and directed).

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron (avera Schneider) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Rama Construction Co

Shetty Construction Co