8173 ADDN ALTN AND SPECIAL REPAIR TO DOCKYARD HOUSE BLDG NO PA 01 AT NAVAL DOCKYARD ADDN ALTN OF SCULLERY AT THIRD FLOOR OF INS AGNIBAHU AND 22ND MVS INTEGRATED COMPLEX AND ADDN ALTN OF PANTRY AREA OF MANOR HOUSE UNDER GE NW KUNJALI

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed..

M &L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement and sand 1:4 using fully treated dry, well graded natural sand confirming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties , mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on brick surfaces, finished even and smoth without using extra cement on walls complete all as specified and as directed.

M&L rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed...

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed...

M &L for applying two coats of oil emulsion distemper over newly plastered surfaces of wall with chalk whiting primer complete all as specified and as directed..

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and as directed..

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and as directed..

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water on plastered surfaces, complete all as specified and as directed.

M & L preparation of plastered surfaces and applying two coats of smart Care Damp block 2K or equivalent acrylic polymer modified cementious high performance coating including smart care crack seal coat complete all as specified and directed

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed..

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified and as directed..

M&L light shadedouble charged virified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed...

M&L light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm),but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed...

S & F in repairs 8 mm to 10 mm thick wooden flooring and skirting including spung/polythene complete all as specified and directed (Make hego/pergo or equivalent)

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed..

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and as directed..

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed..

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240 complete all as specified and as directed..

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and as directed..

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed..

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note : Colour and design of tile shall be approved by GE

M&L for coloured glazed ceramic tiles 450x300x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3 complete all as specified and as directed.. .Note : Colour and design of tile shall be approved by GE

S & F in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and as directed..

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair complete all as specified and as directed...

S & F in repairs Water Closet cat part No 20089(S-10) ,Cat part No 21038 Cistern and seat cover of Hindware or equivalent ,hinges,single flush cistern, fitting and fixing accessories, size 380x700x820mm, P or S trap complete all as specified and directed .

S & F in repairs health faucet (ABS Body) Stainless model No 902 of Silver shine or equivalent suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair under counter wash hand basin vitreous china Cat part No CNS-WHT-705 of Jaquar or equivalentwhite/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed..

S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and as directed...

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified and as directed..

Taking down shutters of any description not exc 1 sqm each complete all as specified and as directed..

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed..

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and as directed..

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and as directed..

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and as directed..

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed..

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed...

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed..

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed..

S&F Stainless steel butt hinges 100 mm complete all as specified and as directed...

S&F 75 mm Stainless steel butt hinges and fixed complete all as specified and as directed...

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (Note: WPC shall be measured and paid separately).

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc.complete all as specified and as directed..

Supply only Liquid water proofing compound complete all as specified and as directed..

M&L providing RCC 1:2:4 type B1 (using 20mm graded aggregate) as in lintel upto 1.5m clear span, cill, plinth courses including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed..

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat and rough finished surfaces of concrete complete all as specified and as directed..

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed..

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and as directed..

S&F 15 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc complete all as specified and as directed..

S&F in repair under counter wash hand basin vitreous china of white/coloured, size and design as per sample and directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed..

S&F in repairs fancy type CP stop/angle cock of 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed..

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc complete all as specified and as directed..

S&F 450mm PVC connections 15 mm size with PTMT nuts complete all as specified and as directed..

S&F CP towel rail 600 mm long with round flange complete all as specified and as directed

M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia complete all as specified and as directed..

S& F in repairs 125 mm dia stainless steel grating fixed in position complete all as specified and as directed..

S&F 75mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed in floor complete all as specified and as directed.

S & F PVC (SWR) bends 75 mm complete all as specified and as directed..

S&F PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed..

S&F Glossy finish stainless steel double bowl with single drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size `1160x510mm and bowl size 340x400x200mm fixed in repair complete all as specified and as directed...

M & L in repairs 18 mm thick both side prelaminated marine plywood acrylic finish with carcass suitable for cupboards, drawers etc of any colour complete all as specified and as directed..

M & L in repairs 12 mm thick both side prelaminated marine plywood *BWR) acrylic finish suitable for modular kitchen cupboards, drawers etc of any colour of Kit Ply or equivalent, complete all as specified and as directed. Note: Design and pattern of the plywood shall be approved by GE

M&L Auto clouse hinges stainless steel for full overlap for cup board shutters etc complete all as specified and as directed..

M&L Stainless Steel cabinet/ door/drawer handle decorative handles suitable size variying from100 to 200 mm complete all as specified and as directed..

S & F in repairs SS Magnetic door catcher for drawer, cupboards etc complete all as specified and as directed..

S&F Stainless steel locks suitable for cupboards, drawers etc complete all as specified and as directed..

S & Fixed in repairs Stainless steel multipurpose baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified and as directed..

S & Fixed in repairs Stainless steel undersink basket SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified and as directed..

S&F in repairs fancy type cock suitable for sink 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Cat part No. CON-349KN of Jaquar or equivalent make mentioned in list of manufactures).

S & F in repairs angular stop cock 15 mm dia , screwed for pipe and fixed complete all as specified and as directed.(Make: Catpart No CON-053 KN of Jaquar or equivalent make mentioned in list of manufactures).

S & F in repairs Stainless steel swivel towel rack 600 mm long without lower hangers but with 3 hooks complete all as specified and as directed.(Make:Cat Log No ACN-1181FHN of Jaquar or equivalent make mentioned in list of manufactures).

M&L dismantling old ceiling and provision of new POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling, complete all as specified and directed.

S & Fixed in repairs 8 mm thick Hilux and equvalent wall panelling on wall with rock wool and aluminium grid preparation of surfaces and applying two coat of Royal Emulson paint over a coat of 2 to 3 mm thick wall care putty and primer etc complete all as specified and as directed.

M&L for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and as directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed.

S&F in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

S & F Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and ofweight not morethan 35 kg and fixed complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified and as directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces complete all as specified and as directed.

M&L point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly incl suitable sizes moduler boxes with cover plate for mounting the moduler switches/regulators/sockets for One light/bell point controlled by one 5A switch complete all as specified and as directed. Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green

All as per item No. 95 above but for One fan/exhaust fan point controlled by one 5A Switch complete all as specified and as directed.

All as per item No. 95 above but for One 5A flush type switch socket point on same board board complete all as specified and as directed.

All as per item No. 95 above but for One 5A flush type switch socket point on independent board complete all as specified and as directed.

M&L for concealed point wiring complete with 2.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with metallic ISI make terminal boxes fix on wall including one PVC insulated & unsheathed multistranded copper conductor 2.5 Sq. mm as earth continuity conductor connected to common earth dolly for single board having 1 x15 Amp switch socket point for independent board complete including required size and numbers moduler box and cover plate complete all as specified and as directed. Notes:- a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green

M&L point wiring complete with 4 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC caping casing with Accessories fixed on wall/ceiling/truss etc with metallic ISI make terminal boxes fix on wall including one PVC insulated & unsheathed multistranded copper conductor 4.0 Sq. mm as earth continuity conductor connected to common earth dolly for single board having 2 x 5 Amps and 1 x15 Amp switch socket point on the same board complete including moduler box and cover plate all as specified & directed. Notes:- a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green

Supply and fixing for exhaust fans in PVC body , Single piece plastic blade AC Single Phase 230 V capacitor run motor of size 250/300 mm sweep. including louvers/shutter and connecting up 3 core flexible cord of size 1/.75sqmm from ceiling rose to exhaust fan all as specified and directed.

Supply and fixing in repair new generation 20W 4F LED batten for surface and pendent application, anodized extruded aluminium housing, high transmissitvity diffuser high lumen output complete fixing arrangement all as specified and directed.

M&L for concealed sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) 3 run of cable and one run of PVC conduit shall be measured as one unit.

M&L for concealed sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) 3 run of cable and one run of PVC conduit shall be measured as one unit.

Supply laying & testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 16 sqmm 4 core .including taking down old unserviceable cable complete all as specified and directed .

S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar, IP 54, IK 09 suitable for flush mounting and surface mounting complete etc all as specified and directed.

S&F in repair sheet metal enclosure TPN DB VTPN 4 Way,415V with 250A copper busbar, double door type IP-54, IK-09 protection . including required numbers of suitable size of gland complete etc all as specified and directed by EIC. Make: Siemens/Legrand /GE Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding complete all as specified and as directed..

S & F in replacement of MCB (SP) 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.

S & F in replacement of MCB, SPN 40 TO 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.

S & F MCCB 4 P 125 Amps,16KA, complete all as specified and directed .

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed .

S & F modular switch 1 way 6A complete all as specified and directed.

S & F modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed .

S & F modular switch socket combination 16A,3 module complete all as specified and directed .

S&F for modular fan regulator fan step regulator, 120W - 2 modular step type complete all as specified and directed..

Supply and fixing in replacement of LED flood lights 50 W,energy saving and enviromental friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories, complete all as specified and directed .

Supply and install hi wall split air conditioner units 1.5 Ton indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity .including copper pipe and all connecting accessories complete all as specified and directed .

Supply and install hi wall split air conditioner units 2 Ton indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity .including copper pipe and all connecting accessories complete all as specified and directed .

Supply and fixing in repair decorative Post top lantern 40 Watts with 360 º indirect light and making good distrubed surfaces all as specified and directed with post top lantern parameters as follows:- System waltage 40 W, protection = IP 66 PF≥ 0.90, Resistance to impact and corrosion. Glare free and better uniformity.Warm White version complete all as specified and directed . Make : Bajaj CAT No: BGCL 40W LED WH or equivalent make mentioned in list of manufactures

Supply and fixing in repair new generation adore LED 3 W Deep Spot 3 K Spot light with intergal Driver Complete with rovides high quality ecomonic energy saving lighting Suitable POP/Gypsum ceiling. complete all as specified and directed .

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for one single pole MCB 20A .including taking down old unserviceable enclosure. complete all as specified and directed .

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and directed .

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed .

S & F in replacement LED garden light 9W cylindrical shaped integral decorative LED bollard with opal acrylic diffuser and IP 65 with all accessories includingn PCC foundation tapper plug, bolts, nuts, screws etc complete all as specified and directed.

Supply and Laying 4 core 4 Sqmm testing and commissioning PVC round copper conductor (flexible) laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and including taking out damaged unserviceable cable complete all as specified and directed.

Supply and Laying 3 core 2.5 Sqmm testing and commissioning PVC round copper conductor (flexible) laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable complete all as specified and directed.

Supply & fixing 15/12W LED City 1 decorative wall light fixture made up of polycarbonate, suitable for 12/15 W retrofit LED lamp (Spiral B-22 base) including all accessories complete all as specified and directed .

S & F Flexible LED strip uses high brightness as the light source for indoor application only. It is highly suitable for cove-lighting, decorative lighting etc.including old unserviceable old unserviceable LEd strip complete all as specified and as directed.

S & F LED Driver 12 volt DC for LED strip as the light source for indoor application only. It is highly suitable for cove-lighting, decorative lighting etc complete all as specified and as directed.

S&F PVC DLP - On wall trunking of size 80mmx50mm with all finishing accessories (end, joint of lid, joint of body,interior angle, exterior angle, flat angle, derivation) confirming standard EN 50085-2-1.Trunking should accept Wiring device with all the functions by associating the accessory of installation.Trunking should confirm to the current specifications of NF C 68-104 in terms of both performance and level of functions provided by the system. Installation trunking (which carries electrical wiring accessories) should be type 3 (installation)in the new standard.Material should be Non-flame propagating. Degrees of protection provided by enclosure should be IP 40. Protection against mechanical impact should be IK 07. Trunking should be delivered in length of 2m. The trunking covers and partitions should be in PVC white RAL 9003.The accessories should be in plastic ABS white RAL. Make-Legrand or equivalent make approved by GE

Taking down old U/S tube light single/ twin recess mount fitting, etc and making good the disturb surface matching with existing surface complete all as specified and as directed.

Taking down old U/S MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ ceiling etc and making good the disturb surface matching with existing surface complete all as specified and as directed.

Supply and fixing in repair new generation ultraslim LED panel recessed LED 2X2 Luminaire 36 watt, CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting Suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make : Jaguar cat No LSVR01S036XC or equivalent make mentioned in list of manufactures

S & F modular switch 1 way 16 A all as specified and directed .

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed .

S&F in repair sheet metal enclosure VTPN 8 Way,415V with 250 A copper busbar, double door type IP-54, IK-09 protection suitable for housing MCCB upto 250 Amp 4 pole incl required numbers of suitable size of gland complete etc all as specified and directed by EIC. Make: Siemens/Legrand /GE Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding complete all as specified and as directed.

S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar, IP 54, IK 09 suitable for flush mounting and surface mounting complete all as specified and as directed.

S & F MCCB 4P 100 Amps,16KA,thermal magnetic,415volts complete all as specified and directed. Make : Legrand cat No 420015 or equivalent make mentioned in list of manufactures

S & F MCB SP 40 Amps,10KA, 'C' curve complete all as specified and as directed.

Supply of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF ECO SAFE compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set incl Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber complete all as specified and as directed. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

MADHU ENTERPRIZES (BID ID -3266249)

Laxmi Sales (BID ID -3266436)

TETRI ENTERPRISES (BID ID -3267334)

A.R. ENTERPRISE (BID ID -3270275)