SPECIAL REPAIR TO INTERNAL ROAD IN AREA AT AIPT UNDER GE (CENTRAL) PUNE

Amount

Repair to potholes any depth, not exc 1 sq m each including Scarifying or picking gravelled, macadam or bituminious macadam surfaces in area exc 400 sqm exc 50mm and n exc 100mm deep and removing the same to a distance 50m and stacking where directed and sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), applying evenly priming /tack coat primer using paving bitumen VG-10 grade @ 7.5 Kg per 10 Sqm and providing bituminious premix asphaltic semi dense concrete (design mix) 30mm thick (consolidated) thickness with 5.5% binder content paving bitumen of VG-30 grade by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed by Engineer In charge. Note : Work to be ordered in patches at different location / roads in AoR of GE (CENTRAL) PUNE. The rates quoted inclusive of work in patch manner.

M&L for prepaing existing black top surface by wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dust/dirt etc and applying evenly a priming/tack coat with bituminious primer VG-10 grade @ 5.0 Kg /10Sqm on block top surface and providing bituminious premix asphaltic semi dense concrete (design mix) 30mm thick (consolidated) thickness with 5.5% binder content (paving bitumen VG-30 grade) by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed by Engineer In charge. Note : Work to be ordered in patches at different location / roads in AoR of GE (CENTRAL) PUNE. The rates quoted inclusive of work in patch manner.

M&L for preparation of black top surfaces of road and applying thermo plastic paint 2.0 mm thick for marking lines dashes, arrows, letters etc on road, pavements and the like exc 10cm width with road marking paint by mechanical machine white/yellow colour as in road surface complete all as specified and directed by Engineer In charge.

S&F high intensity ABC plastic road stud of size varying from 100 mm X 100 mm X 20 mm to 110 mm X 90 mm X 17 mm and colour of body amber, red or white, two way reflective 180 degree and fixing of stud with approved high intensity thermoplastic adhesive bond and nailing the same on specified section of the road with MS anodised pin of standard pattern of manufacturers 8 X 27 mm long including cutting making holes on road for proper fixing of the same complete all as specified and directed by Engineer Incharge.

Aadarsh Construction

M/S ANJANI ASSOCIATES