SPECIAL RAPAIRS TO INTERNAL ROAD AT MVG ENCLAVE UNDER GE (EAST) LUCKNOW

Amount

M&L for Repairs to pot holes any depth, n.exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blended with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed(including supply of premixed macadam, binder and chippings).depth of potholes exc 30 mm

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed

M&L applying priming/tack coat with paving bituminous primer VG-10 @ 5 Kg per 10 Sqm over old black top surfaces.

M&L for bituminous premix asphaltic semi dense concrete, 30 mm (consolidated thickness) with 5.5% paving bitumen binder of VG 30, by weight of total mix, rolled and compacted to required camber and radient with mechanical paver and 8 to 12 tone capacity power roller to a uniform smooth surface as specified and as directed by Engineer-in-Charge.

M&L for Premix Bituminous macadam, (consolidated thickness not more than 75 mm) with 4% paving bitumen binder of VG 30, by weight of total mix, rolled and compacted to required camber and gradient with power roller to a uniform smooth surface as specified and as directed

M&L for preparation of road surfaces and marking 2.5 mm thick centre lines, stop lines dashes, arrrow etc. and the wide on roads pavements including glass beads 250 gms/sqm with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

Supply and fixing cat eye reflective type of metal body alloy of size 80mm x 105mm x 22mm (shank 49.50mm) with PAMA striplens reflector of fixed with and incl MS stud of suitable size as per manufactures instructions. (Make :- Dark Eye Model No DA 53 or Equivelant.)

S&F for solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed (Make :- Dark Eye Model No DA 110 or Equivelant.)

M&L for complete removal of existing treatment of cemented surfaces i.e kerb stone etc of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M/S KAUSHIK CONSTRUCTION (BID ID -3108599)

Matrubhoomi Construction (BID ID -3101960)

M/s Ram Singh Agarwal (BID ID -3099527)

M/s Ramesh Chandra (BID ID -3104819)