Infrastructure Development of Various Tourist Spots in Gajapati District, Odisha.

A. CIVIL WORK

1 PICNIC PINDI (8 No.s) 26,11,373.10

2 SECURITY ROOM (1 No.s) 6,28,478.15

3 CHANGE ROOM CUM BATH 8,57,018.39

4 FOOD KIOSK (3 No.s) 16,84,353.85

5 GAZEBO (1 No.s) 6,43,025.70

6 DRINKING WATER FACILITIES (2 No.s) 4,16,941.18

7 PAVER WAY (760 Sqm) 14,80,937.43

8 SITE DEVELOPMENT 16,00,084.78

9 RAILING 6,76,349.19

10 SIGNAGES 2,97,416.87

11 DUSTBINS 63,000.00

12 TRELLIS, CHAIRS & BENCHES 8,71,307.30

13 LANDSCAPING 11,27,038.00

14 PLAY EQUIPEMENTS & SCULPTURES 9,56,520.00

15 ENTRANCE GATE (1 No.s) 9,66,869.43

16 RENOVATION WORK 62,126.75

17 SELFIE POINT (1 No.s) 1,68,697.98

SUB TOTAL (A) 151,11,538.10

B. ELECTRICAL WORK

i. INTERNAL ELECTRICAL WORK 12,11,312.20

ii. EXTERNAL ILLUMINATION 13,93,750.00

iii. CCTV SYSTEM 2,51,786.00

iv. FIRE EXTINGUISHERS 39,000.00

SUB TOTAL (B) 28,95,848.20

C. PH WORK

i. INTERNAL P.H. & SANITARY WORK 8,52,443.91

ii. SEPTIC TANK, SOAKPIT & I.C 9,61,139.10

iii. BOREWELL 3,11,289.40

SUB TOTAL (C) 21,24,872.40

D. TOTAL (A+B+C) 2,01,32,258.70

E. Add GST @ 18% on TOTAL (D) 18% 36,23,806.57

F. Project Cost with GST (D+E) 2,37,56,065.27

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

NAME OF PROJECT: DEVELOPMENT OF INFRASTRUCTURE AT KHASADA

WATERFALL IN THE DITSRICT OF GAJAPATI, ODISHA

BILL OF QUANTITIES (CIVIL WORK)

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings, and trees girth

upto 300 mm, removal of slumps of trees cut earlier and

disposal of unserviceable materials and stacking of servicable

materials to be used or auctioned, upto a lead of 1000 metres

including removal and disposal of top organic soil not

exceeding 150 mm in thickness as per the direction of the

Engineer-in-charge.

Earth work in excavation of foundation in all kinds of soil within

initial lead & 1.50m initial lift including rough dressing breaking

clods to maximum 5cm to 7cm & laying in layers not exceeding

0.3m depth. as directed by the Engineer-in-charge.

Filling in foundation trenches and plinth, with excavated earth in

layers including watering and ramming with all leads & lifts

including cost of all labour, T&P complete as directed by the

Engineer-in-charge.

Supplying & filling foundation and plinth with good quality river

sand well watered and rammed including cost of material,

labour, carriage, royalty, etc complete as directed by the

Engineer-in-charge.

Surface Filling-Construction of embackment with approved

material obtained from borrow pits with all lifts and leads,

transporting to site by mechanical means within a lead of 5kms,

spreading, grading to required slope and compacting to meet

requirement of table 300-2 & Clause 305 of MoSRT&H

Specifications for Road & Bridge works (4th Revision).

Supplying & filling site with good quality moorum (laterite)

6 rammed, including cost of material, labour, carriage, royalty, etc 708.20 Cum 1504.00 1065132.80

complete as directed by the Engineer-in-charge.

Cement Concrete (1:3:6) using 4cm size hard granite C.B.

metal approved quality from approved quarry including

including hoisting, lowering and laying concrete in layers not

exceeding 15cm thick to the required level ramming, watering,

curing etc. complete including cost, carriage, royalty, cost of all

labour as directed by the Engineer-in-charge.

Cement Concrete of proportion (1:4:8) in foundation and floors

using 4cm size hard granite C.B. metal of approved quality

from approved quarry including hoisting, lowering and laying

8 concrete in layers not exceeding 15cm thick to the required 121.52 Cum 6198.50 753241.72

level ramming, watering, curing etc. complete including cost,

carriage, royalty, cost of all labour as directed by the Engineer-

in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6

(1 cement: 3 coarse sand (zone- III) derived from natural

sources: 6 graded stone aggregate 20 mm nominal size derived

from natural sources) over 75mm thick bed of dry brick ballast

40 mm nominal size, well rammed and consolidated and

grouted with fine sand, including necessary excavation,

levelling & dressing & finishing the top smooth. Based on DAR-

V1-2023-Item No. 4.17 Page-195

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Providing 2.5cm thick Damp Proof Course with cement

concrete (1:2:4) using 12mm size black hard granite crusher

broken chips and screened & washed sharp sand for mortar

and finished smooth to the rough surface of wall including

watering and curing with cost, conveyance, royalties of all

materials with cost of all labour, and T&P required for the work

etc. complete in all respect as directed by the Engineer in

charge.

Providing and applying of pre-construction Anti-Termite

treatment specification and the holes should be pluged with

11 filling materials including cost of all materials, labour charges, 295.28 Sqm 135.20 39920.70

conveyance and all taxes, hire charges of machinaries etc.

complete as per direction of Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement

concrete of M-25 grade as per approved designs and drawings

having a minimum compressive strength (in work test) 250 Kg. /

Square cm. in 15 cm. cubes at 28 days after mixing and test

conducted in accordance with I.S. 516 using 12 mm. to 20 mm.

size black hard crushed broken granite stone chips and

screened and washed sharp sand for mortar of approved

quality from approved quarry, washed and cleaned ( 20mm.

size chips not to exceeds 25 % ) to be mixed in concrete

mixture with Portland slag cement (PSC) including hoisting,

12 lowering, laying and compaction concrete by using vibrators,

watering and curing for 28 days, centering and shuttering then

after dismantling and removing debris from the work site and

finishing the exposed surface smooth providing grooves or

beads wherever necessary including cost, conveyance, loading,

unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc. complete in

all respect as directed by the Engineer-in-Charge. But excluding

cost and conveyance of M.S. rods or Tor steel and binding

wires and labour charges for straightening, cutting, bending etc.

of M.S. rods or tor steel tying the grills and placing in proper

a. Foundation 41.14 Cum 7410.98 304887.72

b. Plinth Beam 17.45 Cum 8276.32 144421.78

c. Columns

Ground Floor 5.32 Cum 16547.30 88031.64

d. Lintel Beam

Ground Floor 2.41 Cum 15014.38 36184.66

e. Chajja/Shelves

Ground Floor 16.42 Sqm 1286.97 21132.05

f. Roof Beam

Ground Floor 3.96 Cum 16547.30 65527.31

g. Slab

Ground Floor 8.70 Cum 14579.88 126844.96

Providing HYSD reinforcement of approved quality confirming

to grade Fe-550D for R.C.C. work including cutting, bending,

binding and tying the grills and placing in position including cost

of binding wire 18 to 20 gauge and cost and carriage of steel.

etc. complete with labour cess, including 5% overlaaping &

wastage etc. as directed by the Engineer-in-charge.

a. Ground Floor 92.86 Qtl. 8779.70 815323.77

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having

crushing strength not less than 75Kg/cm2 with dimensional

tolerance ± 2 percent in cement mortar (1:6) in foundation and

plinth including watering curing, cost of carriage and royalty of

all materials, cost of all labour as directed by the Engineer-in-

charge.

Ground Floor 136.14 Cum 5864.30 798365.80

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having

crushing strength not less than 75Kg/cm2 with dimensional

tolerance ± 2 percent in cement mortar (1:6) in superstructure

including watering curing, cost of carriage and royalty of all

materials, cost of all labour as directed by the Engineer-in-

charge.

Ground Floor 61.94 Cum 5897.60 365297.34

Random rubble H.G. stone Masonary stone masonary in

cement mortar (1:6) in foundation and plinth with all

cost,conveyance etc complete in all respect as per the direction

of the Engineer-in-charge.

Ground Floor 6.48 Cum 5280.50 34217.66

Providing 20mm thick C.P. (1:4) over stone masonary to the

smooth surface including watering, curing cost, carriage,

royalty, and taxes of all materials, cost of all labour, etc

complete as per the direction of Engineer-in-charge.

Providing 16mm thick C.P. (1:6) over brick masonary to the

smooth surface including watering, curing cost, carriage,

royalty, and taxes of all materials, cost of all labour, etc

complete as per the direction of Engineer-in-charge.

Ground Floor 733.11 Sqm 274.90 201531.94

Providing 12mm thick C.P.(1:6) on brick masonary to the

smooth surface including watering, curing, cost, carriage,

royalty of all materials, cost of all labour, etc complete as

directed by the Engineer-in-charge.

Ground Floor 347.48 Sqm 191.30 66472.92

Providing 6mm thick C.P.(1:4) on brick masonary to the smooth

surface including watering, curing, cost, carriage, royalty of all

materials, cost of all labour, etc complete as directed by the

Engineer-in-charge.

Ground Floor 261.00 Sqm 211.13 55104.93

Providing 12 mm thick cement plaster with cement mortar of

mix (1:4) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls punning including

21 watering and curing with cost, conveyance, royalties of all

materials with cost of all labour, and T&P required for the work

etc. complete in all respect as directed by the Engineer in

charge.

Ground Floor 277.31 Sqm 211.60 58678.69

Supplying, fitting and fixing Vitrified tiles (600x600) in floors of

approved make conforming to IS:13755 laid on 20 mm thick

cement mortar (1:4) and filling joints with white cement and

epoxy sealant grouting of approved quality including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 301.60 Sqm 1322.40 398835.84

Supplying, fitting and fixing Vitrified tiles (600x600) in dados

skirting and risers of steps on 12mm thick CP (1:3) jointed with

neat cement slurry mixed with pigments to match the shade of

the tiles and epoxy sealant grouting including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 147.45 Sqm 1451.80 214067.91

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying, fitting and fixing Ceramic tiles (300x300) in floors of

approved make conformaing to IS:13755 laid on 20 mm thick

cement mortar (1:4) and filling joints with white cement and

epoxy sealant grouting of approved quality including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 38.59 Sqm 1037.85 40050.47

Supplying, fitting and fixing Ceramic tiles (300x450) in dados

skirting and risers of steps on 12mm thick CP (1:3) jointed with

neat cement slurry mixed with pigments to match the shade of

the tiles and epoxy sealant grouting including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 168.01 Sqm 1114.30 187213.54

Supplying, fitting and fixing Granite tiles of size above 0.40

sqm in floors of approved make conformaing to IS:13755 laid

on 20 mm thick cement mortar (1:4) and filling joints with white

26 cement of approved quality and epoxy sealant grouting

including cost of all materials, labours ,T&P, carriage, royalty,

taxes etc. required for the work all complete as per direction of

Engineer-in-charge.

Ground Floor 40.59 Sqm 3029.17 122953.96

Supplying, fitting and fixing Granite tiles of size above 0.40

sqm in dados skirting and risers of steps on 12mm thick CP

(1:3) jointed with neat cement slurry mixed with pigments to

27 match the shade of the tiles and epoxy sealant grouting

including cost of all materials, labours ,T&P, carriage, royalty,

taxes etc. required for the work all complete as per direction of

Engineer-in-charge.

Ground Floor 20.02 Sqm 3081.50 61691.63

Supplying, fitting and fixing Chequred tiles in floors of approved

make conformaing to IS:13755 laid on 20 mm thick cement

mortar (1:4) and filling joints with white cement and epoxy

sealant grouting of approved quality including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 37.89 Sqm 810.10 30694.69

Supplying, fitting and fixing Chequred tiles in dados skirting and

risers of steps on 12mm thick CP (1:3) jointed with neat cement

slurry mixed with pigments to match the shade of the tiles and

epoxy sealant grouting including cost of all materials, labours

,T&P, carriage, royalty, taxes etc. required for the work all

complete as per direction of Engineer-in-charge.

Ground Floor 15.20 Sqm 939.60 14281.92

Finishing plastered wall surface with Cement based Wall putty

(water based) of approved make and finished smooth & even

surface to receive painting including cost of scaffolding etc. with

cost of all materials, labours ,T&P, carriage, royalty, taxes etc.

required for the work all complete as per direction of Engineer-

in-charge.

Inside

Ground Floor 909.53 Sqm 102.70 93408.73

Outside

Ground Floor 399.68 Sqm 102.70 41047.14

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Priming one coat with Wall Primer water bond cement primer

including cost of all materials, labours ,T&P, carriage, royalty,

taxes etc. required for the work all complete as per direction of

Engineer-in-charge.

Ground Floor 1309.21 Sqm 81.40 106569.69

Wall painting two coats with plastic emulsion paint of approved

shade on new work to give an even shade including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 553.20 Sqm 107.60 59521.72

Wall painting two coat with any approved Weather coat paint

including cost of all materials, labours ,T&P, carriage, royalty,

taxes etc. required for the work all complete as per direction of

Engineer-in-charge.

Ground Floor 556.17 Sqm 99.68 55439.03

Wall painting with Textured Paint of approved quality of pattern

as specified in drawing including cost of all materials, labours

,T&P, carriage, royalty, taxes etc. required for the work all

complete as per direction of Engineer-in-charge.

Inside 199.84 Sqm 651.41 130177.69

Supplying and fitting-fixing of M.S work (section, flats, solid bars

& angle) as per approved drawing and design with cost of all

35 materials & labour, labour cess, T&P, sundries etc. complete in 5711.25 Kg 170.94 976284.61

all respect as per specification & direction of the Engineer-in-

Charge.

Supplying and fixing of rolling shutters of approved make, made

of required size M.S. laths, interlocked together through their

entire length and jointed together at the end by end locks,

mounted on specially designed pipe shaft with brackets, side

guides and arrangements for inside and outside locking with

push and pull operation complete, including the cost of

providing and fixing necessary 27.5 cm long wire springs

manufactured from high tensile steel wire of adequate strength

conforming to IS: 4454 - part 1 and M.S. top cover of required

thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25

mm thick top cover DAR-2023-V-1 Item No. 10.6.1 Page No.

Supplying and fitting-fixing of two rack Un-plasticised Poly Vinyl

Chloride (UPVC) sliding window of approved make with 6mm

37 thick glass of approved quality complete with frame, shutters 11.16 Sqm 4960.97 55364.43

and all fitting and fixtures etc. complete in all respect as per the

direction of the Engineer-in-Charge.

Supplying, fitting and fixing of 32mm thick flush door shutter

with approved quality of 30mm thick BWR block board pasted

with 1mm thick sunmica on both side of approved design and

quality including cost of all door fittings and fixtures etc.

complete in all respect as per the direction of the Engineer-in-

Charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying and fitting-fixing of factory made single leaf rigid FRP

(alternately called GRP) sandwich composite door shutter of

32mm thick laminated with two GRP skins with wood grain

finish fabricated using UV-stabilised Isopthalic Gelcoat and one

layer of 450 gsm E-glass Chopped Strand Mat (CSM)

impregnated with orthopthalic palyester resin. The thickness of

the skins shall not be less than 3.00 mm Expanded

Polystyrone(EPS) structural foam panel of 29mm thickness and

a density of 20kg/cu.mtr shall be used as core material.

Wooden reinforcements made of seasoned sal wood block of

39 cross section not less than 28mmx32mm and also necessary 9.46 Sqm 6172.10 58388.07

sal wood reinforcements for fitting the metal fittings such as

tower bolts, aldrops, handles etc shall be provided. A structural

adhesive compatible with (EPS) foam shall be used for bending

the core material, the sal wood reiforcements and the skins.

The material and process for manufacturing the door shutters

shall conform to RV-TIFAC composites Design Centre's

standards and specifications and the door shutters tested in

conformation to IS: 4020-1998. The finish of door shutter will be

plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak

wood or any other colour using high quality pigments. Three

Supplying and fitting-fixing of factory made Solid WPC door

frame of size 95mmx55mm fabricated .The door frame consist

of four segments which are provided with plug-in-socket

arrangement in-situ in the mould. The segments are plugged in

and are joined together by means of screw. The WPC frame

shall be provided with The material and process for

40 manufacturing the door frames shall conform to Relavent 55.95 Rmt. 1114.30 62345.09

I.S.specification. The finish of door frame will be plain colour

white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak

wood/sand stone/Champagne/Pastel blue or any other colour

using high quality pigments complete in all respect as per

specification and direction of the Engineer in charge.

Priming one coat with Red Oxide primmer including cost of all

materials & labour, labour cess, T&P, sundries etc. complete in

all respect as per specification & direction of the Engineer-in-

Charge.

Painting two coats with approved Enamel paints of approved

colour, shade over a coat of primer including sand papering,

42 polishing the surface, cost, conveyances of all materials and 489.91 Sqm 182.05 89188.52

cost of all labour etc, complete as per specification & direction

of Engineer-in-charge.

Supplying, fitting and fixing of stainless steel of 304 grade in

hand railing using 50 mm dia of 2 mm thick circular pipe with

Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and

stainless square pipe bracing of size case as per approved

43 design and specification, buffing, polishing etc. with the cost, 2516.92 Kg 407.31 1025178.12

conveyance taxes of all material, cost of all labour etc.

complete in all respect as per specification & direction of

Engineer-in-charge.

Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

44 x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 6.00 Each 230.00 1380.00

cement : 3 coarse sand) and a coat of neat cement, rounding

the edges and making and finishing the outlet complete as per

specification & direction of Engineer-in-charge.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 stone aggregate 10 mm and down gauge),

45 including finishing with cement mortar 1:3 (1 cement : 3 fine 70.07 Rmt. 194.00 13592.61

sand) as per standard design as per specification & direction of

Engineer-in-charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

CNC Carved ACP Paneling - Designing, fabricating, testing,

installing and fixing in position Curtain Wall with CNC Carved

Aluminium Composite Panel Cladding, for all heights and all

levels etc. including : Providing, fabricating and supplying and

fixing panels of aluminium composite panel cladding in required

shape in metalic colour of approved shades made out of 3mm

thick aluminium composite panel material consisting of

Aluminium sheet (0.25mm thick). The aluminium composite

panel cladding sheet shall be coil coated, with PVDF coating of

approved colour and shade as specified using stainless steel

46 screws, nuts, bolts, washers, cleats, weather silicone sealant 15.79 Sqm 4605.00 72712.95

(Dowsil 789), backer rods etc.The Contractor shall provide

curtain wall with aluminium composite panel cladding, having all

the performance characteristics all complete , as per the

Architectural drawings, as per item description, as specified, as

per the approved shop drawings and as directed by the

Engineer-in-Charge.10Years warrenty with MTC(Make-

Viva/Euro Bond or Eq. Brand)

G.R.C. JALI -

Providing and fixing Glass Reinforced Concrete (GR.C)

Screens in approved size pattern, design, shadeand thickness

of 50mm on frame and design element in 30mm thick have

weight approximately between 3.5 4 Kg per Sq Ft and color of

M/S UniStone make or equivalent. The above weight and

thickness is considering dimensions of screens up to 2133mm

in height and 1219mm in width and having at least 50% void

space. The screens should be made from '53 grade' White

Portland Cement manufactured by JK Cement' or equivalent,

47 Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber 9.90 Sqm 5928.70 58694.13

manufactured by 'N.E.G JAPAN or equivalent, Super

Plasticizers manufactured by "BASF or equivalent Polymers

manufactured by 'BASF or equivalent and UV resistant

Synthetic inorganic pigments should be used for pigmentation

manufactured by 'BAYFERROX (Germany) or equivalent. The

material casting should take place in FRP Molds. The fixing of

Screens should be 'Dry fixing' Le to be done with M.S

Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.

complete in all respect as per specification & direction of the

Engineer-in-Charge.

Providing 2.5cm thick Grading Concrete over roof slab with

cement concrete (1:2:2) using 6mm size black hard granite

crusher broken chips and screened & washed sharp sand for

mortar and finished smooth to the rough surface of slab

including watering and curing with cost, conveyance, royalties

of all materials with cost of all labour, labour cess and T&P

required for the work etc. complete in all respect as directed by

the Engineer in charge.

a. Ground Floor 54.08 Sqm 397.72 21508.50

Water Proofing Membrane Coating :(2 Component ) - Providing

& Appling Two Coats of Acrylic Polymer modified cementtious

Memberance coating with Sika /MYK/Equivalent (2 Component

) on roof slab with cost of all material, abour, labour cess and

T&P required for the work etc. complete in all respect as

directed by the Engineer in charge.

Supplying and fixing of 60mm thick cement concrete

interlocking paver block of M-30 grade of approved make,

design, color and size made by Block making machine with

proper compaction laid in required pattern etc. complete in all

respect confirming to IRC SP-63:2018 as directed by the

Engineer-in-Charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying and fixing of Pre Cast Kerb Stone of size 600mm x

300mm 150mm of M-30 grade of approved make, design, color

and size made by block making machine with proper

compaction fixed in required pattern etc. complete in all aspect

confirming to IS 5758:1984 as directed by the Engineer-in-

Charge.

Add for plaster drip course/ groove in plastered surface or

60 moulding to R.C.C projections. DAR-2023-V-1-Item No. 5.30 253.93 Rmt. 68.09 17291.34

Page No. 287

Supplying fitting fixing of S-pan tile roofing sheet including fixing

of ridges winds ties etc, including cost of sheet all fittings but

excluding cost of wind ties and ridges complete in all respect as

per the direction of the Engineer-in-charge.

Removing old lime or cement plaster from walls including raking

62 out joints 12 mm deep and removing the debris within 50m lead 394.72 Sqm 56.45 22282.02

etc. all complete as per the direction of the Engineer-in-charge.

Dismantling and removing 2.5 cm. thick artificial stone flooring

including stacking the useful materials for reuse and removing

the debris within 50m lead as per the direction of the Engineer-

in-charge.

Dismantling brick or stone masonry in cement mortar 3m.

Height including stacking the useful materials for reuse and

removing the debris within 50m. lead as directed by the

Engineer-in-Charge.

Dismentaling & removing R.C.C columns beams, slab,

staircase, landing, lintels, including stacking the useful

materials for the reuse and removing the debries within 50 m

lead as directed by the Engineer-in-Charge.

Dismentaling & removing Doors, Windowss and ventilators

including Removal of frame, hinges, fastening and stacking the

useful materials for the reuse and removing the debries within

50 m lead as directed by the Engineer-in-Charge.

Dismantling G.C.I. or A.C. sheet roofing after carefully removing

the bolts and nuts including stacking of he materials for reuse

and removing the debris within 50m lead as directed by the

Engineer-in-Charge.

Dismentaling roof timbers of thatched roof including stacking

68 the useful materials for reuse and removing the debris within 13.60 Sqm 111.10 1510.96

50m. lead as per direction of Engineer-in-charge.

Dismentaling and removing old tiles flooring including removing

the base coarse and stacking the useful materials for reuse and

removing the debris within 50m lead as directed by the

Engineer-in-Charge.

Dismantling and removing old tiled cladding from walls

including racking out joints 12mm deep stacking the useful

materials for reuse and removing the debris within 50m lead as

directed by the Engineer-in-Charge.

Removing old grading plaster from roof slab,cleaning the

71 surface ,lowering the debris within 50m lead as per the direction 129.84 Sqm 86.40 11218.18

of the Engineer-in-charge.

Disposal of moorum/building rubbish/ malba/ similar

unserviceable, dismantled or waste material by mechanical

transport including loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km for all lifts,

complete as per directions of Engineer-in-charge.Note - item to

be applicable in urban areas having directions for restricted

hours for movement/ plying of load carrying motor vehicle of 3.5

cum or more. (DAR-2023-Page No. 85-Item No. 1.1.18)

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying, fixing and moulding FRP decorative entrance gate

(Jungle Theme Based) as per the approved design (considering

the wind pressure factor) and dimensions with 10 years

warrenty over product supported with M.S structure made with

73 good quality M.S sections including cost, conveyance, loading, 1.00 Each 874000.00 874000.00

unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc. but excluding

cost of foundation work complete in all respect as directed by

the Engineer-in-Charge.

Supplying, fixing and moulding FRP decorative selfie pont

(Waterfall Theme Based) as per the approved design

(considering the wind pressure factor) and dimensions with 10

years warrenty over product supported with M.S structure made

74 with good quality M.S sections including cost, conveyance, 1.00 Each 138000.00 138000.00

loading, unloading, royalties and taxes of all materials and cost

of all labours, sundries, T & P required of the work etc. but

excluding cost of foundation work complete in all respect as

directed by the Engineer-in-Charge.

Supplying fitting fixing of S-pan tile roofing sheet including fixing

of ridges winds ties etc, including cost of sheet all fittings but

excluding cost of wind ties and ridges complete in all respect as

per the direction of the Engineer-in-charge.

Supplying and fixing of commercial water purifier (normal &

cold) complete in all respect as per the direction of the

Engineer-in-charge. (Make- Eureka Forbes/Kent/HUL or eq.

brand)

Providing and fixing sitemap for park type (waterproof) printed

77 over ss plate complete in all respect as per the direction of the 2.00 Each 6050.00 12100.00

Engineer-in-charge.

Providing and fixing signages for park type (waterproof) printed

78 over ss plate complete in all respect as per the direction of the 12.00 Each 1550.00 18600.00

Engineer-in-charge.

Providing and fixing decorative CC chairs for parks (3 Seater)

79 complete in all respect as per the direction of the Engineer-in- 10.00 Each 7500.00 75000.00

charge.

Providing and fixing decorative CC benches for parks complete

in all respect as per the direction of the Engineer-in-charge.

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm

mesh and 300 mm wideth for construction joints and chasing in

brick work for electrical conduits or water supply pipes including

cement slurry and pegs/nails with nailing machine as required

before pastering etc. complete in all respect as directed by the

Engineer-in-Charge.

Supplying and stacking of good earth at site including royalty

and carriage upto 5 k m lead complete (earth measured in

stacks will be reduced by 20% for payment). DSR-Horticulture-

2020 Item No. 2.2 Page No. 225

Supplying and stacking sludge at site including royalty and

carriage upto 5 km lead complete (sludge measured in stacks

will be reduced by 8% for payment). DSR-Horticulture-2020

Item No. 2.3 Page No. 225

Supplying and stacking at site dump manure from approved

source, including carriage upto 5 km lead complete (manure

84 measured in stacks will be reduced by 8% for payment) : 315.00 Cum 254.15 80057.25

Screened through sieve of I.S. designation 20 mm. DSR-

Horticulture-2020 Item No. 2.4.1 Page No. 226

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Spreading of sludge, dump manure and good earth in required

thickness as per direction of officer-in-charge (cost of sludge,

dump manure and/ or good earth to be paid separately). DSR-

Horticulture-2020 Item No. 2.8 Page No. 228

Mixing earth and sludge or manure in the required proportion

86 specified or directed by the Officer-in-charge. DSR-Horticulture- 1575.00 Cum 36.55 57566.25

2020 Item No. 2.9 Page No. 228

Providing and fixing Neelgiri/Mexican grass turf with earthy

50mm to 60mm thickness of existing ground prepared with

proper level and ramming with required tools wooden

(Dhurmos) and than rolling the surface with light roller make the

surface smoothen and light, watering with sprinkler and

maintenance for 30 days or more till the grass establish

properly as per direction of officer incharge. DSR-Horticulture-

2020 Item No. 2.33 Page No. 246

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of 2:1

by volume (2 parts of stacked volume of earth after reduction by

20% : 1 part of stacked volume of manure after reduction by

88 8%) flooding with water, dressing including removal of rubbish 152.00 Each 143.10 21751.20

and surplus earth, if any, with all leads and lifts (cost of manure,

sludge or extra good earth if needed to be paid for separately).

Holes 90 cm dia, and 90 cm deep. DSR-Horticulture-2020 Item

No. 2.14.4 Page No. 85

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of 2:1

by volume (2 parts of stacked volume of earth after reduction by

20% : 1 part of stacked volume of manure after reduction by

89 8%) flooding with water, dressing including removal of rubbish 152.00 Each 43.75 6650.00

and surplus earth, if any, with all leads and lifts (cost of manure,

sludge or extra good earth if needed to be paid for separately).

Holes 60 cm dia, and 60 cm deep. DSR-Horticulture-2020 Item

No. 2.14.3 Page No. 85

Providing and displaying trees and plants as per the direction of

engineer-in-charge.

Ashoka Pendula 5 No.s 1100.00 5500.00

Golden Duranta 5 No.s 100.00 500.00

Porchulaca 8 Colours 5 No.s 100.00 500.00

Eranthemum Yelllow 5 No.s 100.00 500.00

Eranthemum Blood Red 5 No.s 100.00 500.00

Heliconia Red 5 No.s 100.00 500.00

Heliconia Orange dwraf 5 No.s 400.00 2000.00

Heliconia Pink 5 No.s 200.00 1000.00

Heliconia Yellow 5 No.s 100.00 500.00

Elaeocarpus Grandiflorus 5 No.s 1200.00 6000.00

Acalypha Red 5 No.s 100.00 500.00

Acalypha Green 5 No.s 100.00 500.00

H T Rose 5 No.s 250.00 1250.00

Cestrun Nocturnum 5 No.s 100.00 500.00

Chrysanthemum 7 Var 5 No.s 550.00 2750.00

Chrysanthemum 10 Var 5 No.s 400.00 2000.00

Chrysanthemum 4 Var 5 No.s 300.00 1500.00

Chrysanthemum White 5 No.s 550.00 2750.00

Ixora Dwarf Var 5 No.s 150.00 750.00

Eugenia Dwarf 5 No.s 1800.00 9000.00

Tagar Nana 5 No.s 100.00 500.00

Terminalia Metallica Green 5 No.s 2500.00 12500.00

Bamboo Variegata 5 No.s 2500.00 12500.00

Alstonia Scolari 5 No.s 2000.00 10000.00

Avocado 5 No.s 2000.00 10000.00

Awala Grafted 5 No.s 1500.00 7500.00

Water Apple 5 No.s 1500.00 7500.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Guava 5 No.s 1500.00 7500.00

Kashmir Rose White/Red/Pink 5 No.s 200.00 1000.00

Tabebuia Argentea 5 No.s 2500.00 12500.00

Mogra 5 No.s 100.00 500.00

Monstera Deliciosa 5 No.s 2500.00 12500.00

Parijatham Dwarf 5 No.s 100.00 500.00

Kamini 5 No.s 150.00 750.00

Merigold 5 No.s 150.00 750.00

Salvia 5 Colours 5 No.s 150.00 750.00

Bleeding Heart 5 No.s 150.00 750.00

Dalhia 5 No.s 250.00 1250.00

Travellers Spam 5 No.s 1200.00 6000.00

Thuja 5 No.s 800.00 4000.00

Addinium 5 No.s 700.00 3500.00

Poinsettia 5 No.s 150.00 750.00

Sadabihari 5 No.s 150.00 750.00

Sugandharaj 5 No.s 150.00 750.00

Malli 5 No.s 150.00 750.00

Bhutan Tagara 5 No.s 150.00 750.00

Cosmos 5 No.s 100.00 500.00

Zinia 5 No.s 100.00 500.00

Pentas 5 No.s 150.00 750.00

Rohio 5 No.s 100.00 500.00

Camelia 5 No.s 900.00 4500.00

Arelia Ball 5 No.s 200.00 1000.00

Banglore Croton 5 No.s 200.00 1000.00

Pandanus 5 No.s 150.00 750.00

Gerbera 5 No.s 400.00 2000.00

Inca (Merigold) 5 No.s 150.00 750.00

Table Rose 5 No.s 100.00 500.00

Hoya 5 No.s 900.00 4500.00

Aglonema 5 No.s 900.00 4500.00

Provision for Solid Waste Collection Dustbin ( Made by Stain

91 less Steel) complete in all respect as per the direction of the 2 Each 5900.00 11800.00

Engineer-in-charge.

Provision for Glass Waste Collection Dustbin (Made by Stain

92 less Steel) complete in all respect as per the direction of the 2 Each 5900.00 11800.00

Engineer-in-charge.

Provision for Biological (Wet) Waste Collection Dustbin (Made

93 by Stain less Steel) complete in all respect as per the direction 2 Each 5900.00 11800.00

of the Engineer-in-charge.

Provision for Decorative Type Fiber Dustbin complete in all

respect as per the direction of the Engineer-in-charge.

Supply, fixing and installation of artificial sculptures including

95 material, labour and all necessary accessories as per the

direction of engineer-in-charge.

Tiger Big Size 1 No.s 29500.00 29500.00

Tiger Small Size 1 No.s 13900.00 13900.00

Peacock 1 No.s 9900.00 9900.00

Deer 1 No.s 10900.00 10900.00

Chimpanzee 1 No.s 26900.00 26900.00

Giraffe 1 No.s 13900.00 13900.00

Egret 1 No.s 5100.00 5100.00

Elephant with Synthetic Grass 1 No.s 134900.00 134900.00

Mother & Child with Synthetic Grass 1 No.s 135900.00 135900.00

Supply, fixing and installation of playing equipements including

96 material, labour and all necessary accessories as per the

direction of engineer-in-charge.

SPRING RIDER:-

Duck/Donald/Mickey/Fish, Area-1'x2', Height-1'-6'', Age group- 1 No.s 11990.00 11990.00

2-5 years

DELUXE SPRING RIDER:- Duck/Sea

Horse/Mickey/Fish, Area-1'x2', Height-1'- 6'', Age group-2-5 1 No.s 16390.00 16390.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

ROCKING BOAT:- Area-1'x5', Safe

Area-3'x7', Height-18'', Age group-2-6 years, Seat-FRP, Pipe- 1 No.s 21890.00 21890.00

25 mm, 20mm & 15mm ID G.I Medium Pipe.

THREE-IN-ONE:- (SEA-SAW-01, SWING-01, SLIDE-01).:-

Area-7'x12',

Safe Area-8'x12', Height-3'-6'', Age group-2-6 years, Seat-FRP,

Pipe- 40 mm, 25mm & 15mm ID G.I Medium Pipe.

SPRING SEE SAW (FOUR-SEATER):-

Area-2'x10', Safe Area-4'x14', Height- 24'', Age group-2-10

years, Seat-Plastic, Pipe- Main Pipe 10 Length of 65mm ID

G.I Pipe, Handle- 25mm & 20mm ID G.I Pipe.Medium Pipe.

ARCH SWING:- Area-4'x10', Safe Area- 4'x10', Height-7', Age

group-3-14 years, Seat-02 no Rubber Seat, Main Pipe- 65mm

ID B-Class G.I Pipe, Top Pipe- 50mm ID B-Class G.I Pipe,

Chain- 8mm SS Chain Rubber Coated.

STRAIGHT NET CLIMBER:- Area-

2'x7', Safe Area-3'x8', Height-7', Age group-3-14 years,Main 1 No.s 30900.00 30900.00

Pipe-40mm ID B- Class GI Pipe, Rope-Nylon.

Multi-Purpose Play Unit:- Area-13 mtr X 9 mtr.

Consists of: -

1. Square Deck-7’ ht with FRP roof-01 no

2. Square Deck-5’ ht with FRP roof-04 no

3. Square Deck-3’ ht with FRP roof-01 no

4. Suspension Bridge-8’ long- 02no

5. Hanging Bridge-8’ long-01 no

6. FRP Tunnel-6’ long-02 no

7. Spiral Slide-7’ht: -01 no 1 No.s 325490.00 325490.00

8. Step Ladder: -02 no

9. Fire Man pole: - 01 no

10. Ship Ladder: - 01 no

11. Zebra Climber-5’ht.: - 01 no

12. Plain Slide-5’ ht.: -01 no

13. Handi Hold: - 01 no

14. Wave Slide-5’ ht.: -01 no

15. Bowl Slide-3’ ht.: -01 no

TOTAL CIVIL WORK 15111538.11

DETAIL ESTIMATE OF ELECTRICAL WORK

INTERNAL

A Sub-Head I (Modular Wiring Items)

Recessed wirring to light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper

conductor of ISI marked with 20 mm dia PVC flexible non

metallic conduit FRLS type ISI marked 6A modular type (anti

bactorial & flame retradant type) switch ISI marked and ceiling

rose ISI marked Make- Anchor/Havells of modular type G.I

box with metallic cover plate (both side) (anti bactorial & flame

retradant type) of suitable size, modular box with 1.5 sq. Mm

1 FRLSH PVC insulated single core multistandard copper

conductor as earth wire including all accessories and

connection as per direction of Engineer -in -Charge.

CATAGORY AS FALLOWS ,complete suitable for IPH standard

hospital. All the switches & sockets should be warrantied for a

replacement period of 2 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free after sales

service within warranty period for acceptance of materials.

a) GROUP-A 128 Nos 555.00 71,040.00

a-1) GROUP-B 53 Nos 791.00 41,923.00

a-2) GROUP-C 50 Nos 1088.00 54,400.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Group control of point in Recessed wirring to light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLSH/LSZH PVC insulated copper conductor of ISI marked

Make- 20 mm dia PVC flexible non metallic conduit FRLS

type ISI marked with 6A modular type((anti bactorial & falme

retradant type)) switch ISI marked , and ceiling rose ISI

marked of modular type G.I box with metallic cover plate

(both side)(anti bactorial & falme retradant type) , of suitable

size, modular box with 1.5 sq. Mm FRLS PVC insulated single

core multistandard copper conductor as earth wire including all

accessories and connection as per direction of Engineer -in -

Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH

standard hospital.(Maximum 02 nos point in one circuit).All the

switches & sockets should be warrantied for a replacement

period of 10 years against defects with ncessary test report &

Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials.

Supplying ,fixing of 6A Plug on the same board in existing

switch board with complete fitting by 01 no of 6A switch &

socket (modular type)( (anti bactorial & flame retradant type)) &

other required accessories of ISI marked as approved as per

direction of Engg. -in -Charge. Make-

Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or

equievalant reputed make & model A catagory ISI marked as

approved, complete suitable for IPH standard

hospital.(Maximum 02 nos point in one circuit).All the switches

& sockets should be warrantied for a replacement period of 2

years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free aftersales service within warranty period

for acceptance of materials.

Supplying,fixing of 6A Plug on the separate board with

complete fitting by 01 no of 6A switch & socket(modular type)(

(anti bactorial & flame retradant type)) with suitable size

modular box & cover(anti bactorial & falme retradant type)

including supplying of all required accessories of ISI marked

as approved as per direction of engg-in-charge.. , complete

d) suitable for IPH standard hospital.(Maximum 02 nos point in 26 Nos 508.00 13,208.00

one circuit).All the switches & sockets should be warrantied for

a period of 10 years against manufacturing defects against

which ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to avail

free aftersales service within warranty period for acceptance of

materials.

Supplying,fixing of 1x16A Plug on the separate board with

complete fitting by 01 no of 16A switch & socket(modular

type)((anti bactorial & flame retradant type)) with suitable size

modular box & cover(anti bactorial & falme retradant type)

including supplying of all required accessories of ISI marked

as approved as per direction of engg-in-charge, (For

equipement power)All the switches & sockets should be

warrantied for a replacement period of 10 years against

defects with ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to avail

free aftersales service within warranty period for acceptance of

materials.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying,fixing of 2x6A+1X1 6A Plug on the separate board

with complete fitting by 01 no of 16A+2 no 6A switch &

socket(modular type) ( (anti bactorial & falme retradant type)

with suitable size modular box & metallic cover plate (both

side)(anti bactorial & falme retradant type)including supplying of

all required accessories of ISI marked as approved as per

f) direction of engg-in-charge.., (For equipement power)complete 7 Nos 1381.00 9,667.00

suitable for IPH standard hospital.(Maximum 02 nos point in

one circuit).All the switches & sockets should be warrantied for

a replacement period of 10 years against defects with

ncessary test report & Warrnaty certificate to be submitted to

the department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board

with complete fitting by 01 no of 16A+3 nos 6A switch &

socket(modular type) ( (anti bactorial & falme retradant type)

with suitable size modular box & metallic cover plate (both

side)(anti bactorial & falme retradant type)including supplying of

all required accessories of ISI marked as approved as per

direction of engg-in-charge, (For equipement power)complete

suitable for IPH standard hospital.(Maximum 02 nos point in

one circuit).All the switches & sockets should be warrantied for

a replacement period of 10 years against defects with

ncessary test report & Warrnaty certificate to be submitted to

the department for genuinity of product & to avail free after

sales service within warranty period for acceptance of

materials.

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLSH/LSZH insulated, copper

conductor, single core cable , in recessed PVC conduit Heavy

duty FRLS of mentioned size (AKG/Anchor/Kinjal or

2 equievalant ISI marked as approved) as required as per

direction of Engg.-in-Charge. Ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free after sales service within warranty period

for acceptance of materials

2 nos single core 1.5 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

continuty conductor. In 20 mm dia non metallic heavy duty

flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

2 nos single core 2.5 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

b) continuty conductor in 20 mm dia non metallic heavy duty 220 Mtr 145.00 31,900.00

flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER

POINT TO EACH QTR) (2X2.5+1X1.5)

4 nos single core 2.5 sq. mm copper wire for phase and neutral

and 02 nos of single core 2.5 sq. mm copper wire for earth

continuty conductor .in 25 mm dia non metallic heavy duty

flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)

2 nos single core 4 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

continuty conductor in 20 mm dia non metallic heavy duty

flexible conduit .(PDB to PSB/ GAYSER POINT/AC

POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG

PANEL ESSENTIAL LOAD) (2X4+1X1.5)

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying and fixing 20 amps, 240 volts, SPN, industrial type

socket outlet, with 2 pole and earth metal enclosed plug top

along with 32 amps. C-series, SP MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover for

the socket outlet, and complete with connections, testing and

3 commissioning etc. as required as per direction of Engg.-in- 10 Nos 616.00 6,160.00

Charge.. .All the Components should be warrantied for a

replacement period of 5 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supplying and fixing 32 amps, 415 volts, TPN, industrial type

socket outlet, with 4 pole and earth metal enclosed plug top

along with 32 amps. C-series, TP MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover for

the socket outlet, and complete with connections, testing and

commissioning etc. as required as per direction of Engg.-in-

Charge.. . Equievalant higher model of .All the Components

should be warrantied for a replacement period of 5 years

against defects with ncessary test report & Warrnaty certificate

to be submitted to the department for genuinity of product & to

avail free aftersales service within warranty period for

acceptance of materials.

Supplying and fixing following size/ modules, GI box along with

modular base & metallic cover plate (both side)(anti bactorial

type) plate for modular switches in recess etc as required as

per direction of Engg.-in-Charge. .All the Components should

5 be warrantied for a replacement period of 5 years against

defects with ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to avail

free aftersales service within warranty period for acceptance of

materials.

a) 4 moudle(125mmx75mm) 28 Nos 267.00 7,476.00

b) 1 moudle(75mmx75mm) 50 Nos 220.00 11,000.00

c) 12 moudle(200mmx150mm) 12 Nos 482.00 5,784.00

Supplying and fixing of following sizes of medium class PVC

FRLS conduit ISI marked along with accessories in

6 surface/recess including cutting the wall and making good the

same in case of recessed conduit as required as per direction

of Engg.-in-Charge

a) 20 MM 220 mtrs 98.00 21,560.00

b) 25 MM 60 mtrs 100.00 6,000.00

Supply and fixing modular type indicator on the existing switch

box/cover . Equievalant higher model of

Schneider/Hager/Siemens/Anchor/Panasonic make or

equievalant reputed make & model A catagory ISI marked as

approved as required as per direction of Engg.-in-Charge.All

the Components should be warrantied for a replacement period

of 5 years against defects with ncessary test report &

Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying and installation of AC starter Modular type,

Equievalant higher model of

Schneider/Hager/Siemens/Anchor/Panasonic make or

equievalant reputed make & model A catagory ISI marked as

approved coil voltage-415 Volt A.C. & O/L range of 9-14A range

on mod Box of suitable size including modular coveras required

as per direction of Engg.-in-Charge .All the Components should

be warrantied for a replacement period of 5 years against

defects with ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to avail

free aftersales service within warranty period for acceptance of

materials.

Supplying,fixing of Blanking plate(modular type)( (anti bactorial

& flame retradant type)) in existing switch box(anti bactorial &

flame retradant type) including supplying of all required

accessories of ISI marked as approved as per direction of

engg-in-charge.., complete suitable for IPH standard hospital.It

should be warrantied for a period of 10 years against

manufacturing defects against which ncessary test report &

Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials.

B Sub-Head II (Light fitting Fixture & Fan)

Supplying, installation, of exhaust fan of heavy duty 300 mm

1 sweep of exhaust fan in the existing wall, including fixing & 23 Nos 3150.00 72,450.00

conntection as required as per direction of Engg.-in-Charge.

Supplying, installation, testing and commssioning of 1200 mm

sweep white/milky colour ceiling fan including wiring the down

2 rod of standard length (upto 30 cm) with 1.5 sq mm PVC 7 Nos 2450.00 17,150.00

insulated, copper conductor, single core cable etc. as required

as per direction of Engg.-in-Charge.

Supplying and fixing of Energy efficient surface mounted

3 LED luminaire square/round shape 25W as required as per 16 No 2490.00 39,840.00

direction of Engg.-in-Charge

Supplying and fixing of Energy efficient surface mounted

4 LED luminaire square/round shape 12W as required as per 19 Nos 1390.00 26,410.00

direction of Engg.-in-Charge

Supplying and fixing of Energy efficient surface mounted

5 LED luminaire square/round shape 9W as required as per 18 Nos 1190.00 21,420.00

direction of Engg.-in-Charge

Supplying and fixing of Energy efficient LED bettern

luminaire 20W as required as per direction of Engg.-in-Charge

Supplying and fixing of Energy efficient 2 Way Up &

7 Down LED luminaire square/round shape 12W as required as 10 Nos 3200.00 32,000.00

per direction of Engg.-in-Charge

Supplying and fixing extra conduit down rod of 20 cm length

G.I. pipe 15 mm dia, heavy gauge including painting etc. as

requiredas required as per direction of Engg.-in-Charge .

(Note : More than 5 cm length shall be rounded to the nearest

10 cm and 5 cm or less shall be ignored)of ISI mark as

approved.

C BDBS,DB,AC DB,FLOOR PANELS,MCBS

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying and fixing of following mentioned way, three

pole/single pole and neutral, sheet steel,double door MCB

distribution board, 415 volts/240 volts shall be as per IEC

61439-3,integrated door earthing system offering additional

safety to the user,High quality polyurethane Gasket,the box and

cover shall be fabricated to withstand IK09,the DB should be

1 properly pre-treated with 7 tank process and duly powder

coated, phosphatized with powder coated finish, on

surface/recess, complete with terminal blocks,with suitable size

FR PVC insulated copper conducter up to terminal blocks,

tinned copper busbar, neutral busbar, earth bar, din bar. . as

per direction of Engg.-in-Charge. The Distribution boards

should be Replacement Warranty will be 5 years

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per

IEC 61439-3 suitable for Flush mounting and Surface mounting

with 100A Copper Bus Bar for each phase, with neutral Bus

bar, Earth Bar & Cable ties for cable management, prefitted

masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER

INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years.

c) 2+4 way MCB Enclosure DB 14 Nos 1,633.00 22,862.00

Supplying and fixing 20 amps rating, 240 volts, C series,

Double poles MCB of in the existing MCB DB complete with

connections as per direction of Engg.-in-Charge. The MCB

2 should be Replacement Warranty will be 5 years .MCB should 28 Nos 333.00 9,324.00

have the fault indication system in different colour for ON, OFF

& TRIP condition or Mid trip position for Trip conditions for

easier identification of fault.Warranty on MCB is 5 years.

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C

series, single poles MCB of Make-LEGRAND-Ekinox3 DB/

Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant

model)/Panasonic(Equivalant model) /ABB(Equivalant model)

or equievalant reputed make & model A catagory ISI marked as

3 approved. the existing MCB DB complete with connections as 72 Nos 132.00 9,504.00

per direction of Engg.-in-Charge. The MCB should be

Replacement Warranty will be 5 years.MCB should have the

fault indication system in different colour for ON, OFF & TRIP

condition or Mid trip position for Trip conditions for easier

identification of fault.Warranty on MCB is 5 years.

Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA in

the existing MCB DB in the existing MCB DB complete with

8 connections as per direction of Engg.-in-Charge.(for power BDB 7 Nos 2,641.00 18,487.00

& AC ODU, 8 way TPN BDB IC).The RCCB should be

Replacement Warranty will be 5 years

D Earthing Installation

S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x

6 mm thick ISI marked including accessories and providing

masonary with cover plate having loccking arrangement and

watering pipe etc (WITH charcoal and salt) as required as per

direction of Engg.-in-Charge. The entire earthing system

should be Replacement Warranty will be 5 years

Providing and fixing 4 mm dia copper wire on surface or in

2 recess for loop earthing as required.as per direction of Engg.- 152 Mtr 96.00 14,592.00

in-Charge.

Providing and fixing 25mm x 5 mm copper strip on surface or in

3 recess for connections etc. as required as per direction of 76 Mtr 1,096.00 83,296.00

Engg.-in-Charge.

Supplying and making brick massonary pedastal with extra

4 super structure including cement plastering etc as required as 8 Mtr 2,710.00 21,680.00

per direction of Engg.-in-Charge.

E CABLING AND END TERMINATION MAIN AREA

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying of one number PVC insulated armoured and PVC

sheathed XLPE property AL. conductor power cable of 1.1 KV

grade POLYCAB/HAVELLS/Finolex or equievalant reputed

make ISI marked as approved of following size cables as per

direction of Engg.-in-Charge. Ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free after sales service within warranty period

for acceptance of materials

a) 4core x 16 sq mm (to FDB L/P ) 140 Mtr 145.61 20,385.40

b) 4 core x 4 sq mm (for small power) 140 Mtr 87.87 12,301.80

2 LAYING OF CABLE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1

kv grade size not exceeding 25 SQ. MM direct in ground in the

2.1 trench in one horizental formation including excavation ,sand 245 Mtr 130.00 31,850.00

coushing protection covering and refilling the trench etc as

required as per direction of Engg.-in -charge.

Supplying and making end termination with brass compression

3 gland and aluminium lugs for following mentioned size cable.as

per direction of Engg.-in-Charge.

a) 4 core x16sq mm 28 Nos 196.00 5,488.00

F MAIN CONTROL PANEL AT GF

S/I/T&Commissioning of LT indoor floor mounted cubical type

electrical main panel (for both light and power circuit) made out

by 2mm CRCA steel sheet duly derusted & painted by siemens

gray powder cote paint is designed as G.A drawing as per

direction of Engg.-in-Charge.Warrentee period of replacement

of panel & accessories must be 5 years & compelete test

certificate must be submitted along with panel board including

component list.

In commer-1-01 number of 160A 4P Icu=100%Ics,0, LSIG

MCCB with micro processor based release Electrical locking for

normal & DG

Busbar-1&2 04 numbers of 300Amps Aluminium busbar with

1A/SQ.MM current carring capacity. busbar duly sleeved by

color coated PVC sleeve & supported by suitable size DMC

insulator. (for outgoing)

Out going- 06 numbers of 63A 4P MCB

Out going- 1 numbers of 125A 4P Icu=50%Ics, LSIG MCCB

withTMR based release with adjustable overload

Out going- 06 numbers of 32A 4P MCB

Instrument- (i) 03 numbers phase indicating lamp with toggle

switch & HRC fuse.

(ii) 02 set of digital type multifunction meter with CT for

voltage,current,frequency,PF,THD indication with RS 485

COMPACTIVITY FOR bms data.

(iii) 4 nos of 65kA SP VSD WITH 32A SP MCB

ILLUMINATION

Provision of Power Unit 3.5kVA inverter 1 pc 200 Ah battery 4

1 pc 542w Pannel 6 pc Other accessories) complete in all respect 1 Each 3,05,000.00 3,05,000.00

as per the direction of the Engineer-in-charge.

Provision 50watt Mini-mast 50watt led -4nos 42ah battery -4nos

120watt solar panel- 4nos 10mtr GI pole 6mtr 5" GI pipe, 3mtr

2 4" GI pipe and 2mtr 3" GI pipe, 4panel frame, 4light arm 1 Each 85,000.00 85,000.00

complete in all respect as per the direction of the Engineer-in-

charge.

Provision of Solar Street Light 30watt led, 24ah battery 75wp

3 PV module, 6Mtr GI pole and structure complete in all respect 25 Each 28,250.00 7,06,250.00

as per the direction of the Engineer-in-charge.

Provision for Decorative Type Park Bollard Lights complete in

all respect as per the direction of the Engineer-in-charge.

CCTV SYSTEM

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supply, Installation, Testing & Commissioning of Full High

Definition 5MP( 2880 x 1624) resolution vandal proof

dome/bullet camera, 1/3" Progressive Scan CMOS Sensor, IR

Cut mechanical Filter for True Day & Night vision, Support dual

streams, Onvif supported, IP66 Weather proof outdoor

enclosure, Inbuilt Smart IR LEDs with intensity control, IR 30

mtr, H.264 / H.265, Supports android and iOS APP for Smart

phone and tablets, with Inbuilt audio, -10°C to + 50°C, CE,

FCC, RoHS . Make-Honeywell series 20/Pelco/Axis

Supply , Installation, testing , commissioning of 32 Channel

NVR with 4 SATA; 384 Mbps incoming bandwidth, Up to 8

Megapixels Resolution Display and Recording, H.265 video

compression technology with real time encoding, Full function

CMS (Central monitoring software) supported, Two way audio

supported, Dual streaming technology to encode recording

stream and network stream separately, Supports remote

monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE,

DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm,

Motion Detection & Exact Search (accurate to second), Record

Snapshot, FTP, Preset Calling, Email notification supported,

Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC,

RoHS). Make-Honeywell series 20/Pelco/Axis

Supply & Installation of surveliance 8 TB HDD . Make: WD/

Segate/ Toshiba

Supply & installation of 55'' IPS Ultra HD AI for 24x7 application

TV.Make:LG/Samsung/Sony

Supply and Laying of cat6 23Awg UTP cable through existing

conduit, Make: Legrand/Systimax/Panduit

FIRE EXTINGUISHERS

Portable Fire Extinguisher System Supplying, installation,

testing and commissioning of CO2 type Fire Extinguisher 4.5 kg

capacity confirming to IS: 2878 made from ISI marked

seamless cylinder confirming to IS: 7285, fitted with ISI marked

1 controlled valve confirming to IS: 3224, high pressure 1mtr 4 No.s 7,800.00 31,200.00

discharge hose & horn complete with initial gas charged

with carrying handle & wall mounting bracket as per

direction of Engineer-in-charge.

(Make:SAFEPRO/SUNMAX/SAFEX or equievalant )

Supplying, installation, testing and commissioning of ABC type

fire extinguishers of 6 kg capacity including cost of all material

2 & labour etc complete with carrying handle & wall mounting 2 No.s 3,900.00 7,800.00

bracket as per direction of Engineer-in-charge.

(Make:SAFEPRO/SUNMAX/SAFEX or equievalant )

TOTAL ELECTRICAL WORK 28,95,848.20

A. INTERNAL P.H. & SANITARY WORK.

Providing and fixing Clorinated Polyvinyl Chloride [CPVC] pipes

SDR-11 conforming to IS:15778, having thermal stablity for hot

& cold water supply , including all CPVC plain & brass threaded

1 fittingincluding fixing the pipe with clamps at 1.00m spacing .

This includes jointing of pipes and fittings with one stp CPVC

solvent cement and testing of joints complete as per

specification and direction of Enfineer-in-charge.

20 mm PVC sch-80 pipes 30.00 Mtr 303.00 9,090.00

25 mm PVC sch-80 pipes 50.00 Mtr 421.50 21,075.00

32 mm PVC sch-80 pipes 70.00 Mtr 581.90 40,733.00

50 mm PVC sch-80 pipes 200.00 Mtr 1,194.60 2,38,920.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying all materials,labour and T&P for cutting holes through

existing brick work including making good to the same in

cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C.

pipes and fittings all complete as per specification.

250mm Thick 20.00 Each 66.40 1,328.00

Supplying all materials,labour and T&P for cutting holes in

R.C.C. floors and roofs up to 19 cm. thick including for passing

GI / PVC pipes and fittings etc. and repairing the holes after

3 insertion of pipes etc. with cement concrete 1:2:4 including

finishing complete to make it leak proof leak to the damages all

complete as per specification and direction of the Engineer-in-

charge.

Supplying all materials,labour and T&P for cutting groves in

pucca floor and walls for taking G.I. pipes and fittings /P.V.C.

pipes and fittings and making good to the damages all complete

as per specification.

Supplying all labour and T&P for fixing long body bib cock of

the following size as per specification all complete.15mm Dia

Supplying all labour and T&P for fixing CP Angular stop cocks

c) polished bright confirming to IS:781-1995 of the following

nominal sizes as per specification all complete.15mm Dia

Supplying fitting fixing of C.P Pillar Taps highpressure lettered

d) Hot and cold with long screws shanks and back nuts of the

following nominal bore as per specification.15mm Dia

Supplying all labour and T&P for fixing CP short body Bib cock

e) [taps] polished bright confirming to IS:781-1995 of the following

nominal sizes as per specification all complete .

Supplying all labour and T&P for fixing U.P.V.C Ball valve [

horizontal plungr type] confirming to IS:1703-1977 of the

f) 9.00 Each 686.50 6,178.50

following nominal sizes as per specification all complete. 25mm

Supplying all labour and T&P for fixing U.P.V.C Ball valve [

horizontal plungr type] confirming to IS:1703-1977 of the

g) 9.00 Each 1,420.40 12,783.60

following nominal sizes as per specification all complete.32mm

Supplying all labour and T&P for fixing U.P.V.C Ball valve [

horizontal plungr type] confirming to IS:1703-1977 of the

h) 17.00 Each 3,124.00 53,108.00

following nominal sizes as per specification all complete.50mm

Providing and fixing C.P. Brass Extension Nipple 1 inch with

i) 8.00 Each 588.57 4,708.56

extension piece as per direction of Engineer-in-charge.

Supplying fitting fixing of CP waste of the following noninal

j) 10.00 Each 380.10 3,801.00

diameter for wash hand basin and sink as per specification.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying all materials,labour and T&P for fixing CP Gratings of

the following nominal diameter of outlet, of self cleaning design

k) with sand cast iron screwed down or hinged grating with or

without vent arm including cutting and making good to the

walls and floors etc. all complete as per specification.

Providing and fixing of approved make and model for

Chrome plated Grab Bar,for Physically challenged toilet, The

work shall include the cutting of walls or floors & making good,

complete as per direction of Engineer in Charge.

Supplying fitting fixing of C.P health facuet high pressure

6 lettered Hot and cold with long screws shanks and back nuts of

the following nominal bore as per specification.

15mm dia CP Health Faucet of 1mtr long PVC tube

Providing and fixing of Rational moulded polyethylene

cylendrical vertical water storate tanks confirming to IS:12701-

1996 including cutting holes through the tank and fixing mild

steel tubes and fittings and proviidng extra sockets and jam

nuts , fixing ball volve ete. including hoisting up to a hite of

5.00metes above ground level and placing the tank to the

required position etc. all complete as per specification and

direction of the engineer-in-charge.

0 1000 litre capacity water storage tanks 7.00 Each 14,387.60 1,00,713.20

Supplying all materials, labour, T&P and fitting and fixing U-

PVC SWR soil waste ventilating pipes and fittings of the

following outside diameter conforming to ISI No 13592/1992 to

walls with nails, bobbins and wooden plugs or laying in trenches

8 including jointing with supply of approved rubber lubricant by

non-heat application method/as per manufacturer's

specification, testing, earthwork in excavation in all kinds of soil

and refilling of trenches as per specification and direction of the

Engineer-In-Charge.

110mm diameter PVC SWR pipes 70.00 Mtr 388.30 27,181.00

75mm diameter PVC SWR pipes 44.00 Mtr 240.50 10,582.00

110mm PVC Door Tee 7.00 Each 388.60 2,720.20

75mm PVC Door Tee 7.00 Each 293.00 2,051.00

110mm PVC offset 9.00 Each 138.00 1,242.00

110mm PVC door bend 7.00 Each 216.40 1,514.80

75mm PVC door bend 7.00 Each 114.10 798.70

110mm PVC plain shoe bend 7.00 Each 170.80 1,195.60

75mm PVC plain shoe bend 7.00 Each 83.20 582.40

110mm PVC vent cowl 8.00 Each 86.60 692.80

75mm PVC vent cowl 3.00 Each 73.00 219.00

110mm S-trap 9.00 Each 627.50 5,647.50

110mm P-trap 2.00 Each 348.20 696.40

110mm SWR Pipe Clip 46.67 Each 30.40 1,418.67

75mm SWR Pipe Clip 29.33 Each 23.40 686.40

Supplying all materials,labour and T&P for fixing of PVC 10 ltr

capacity low level flushing cistern with manually controlled

device[handle cover] confirming to IS 7231 with fittings and

fixtures etc. all complete as per specification.

10 Liters capacity PVC cistern

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying all materials,labour and T&P for fixing water closet

,squatting pan(Indian type.W.C.pan or Orissa pan) confirming to

IS 2556 : Part-3-2004 duly embedded in cement concrete

(1:4:8) using 40mm.nominal size h.b.g. chips [including foot rest

for I.W.C. and trap] all complete as per specificationand

directon of theEngineer - in - charge.

Orissa Pan -

Supplying all materials,labour and Supplying all

materials,labour and T&P for fixing in cement mortar (1:3) a pair

11 of white vitereous china (250x130x30mm.) foot rest for

squatting water closet. etc. all complete as per specificationand

direction of the Engineer-in-charge.

Foot Rest -

Supplying all materials,labour and T&P for Supplying all

materials,labour and T&P for fixing wash down water closet

(European type W.C.) with integral "S" or "P" trap tothe floor

with wooden plug and chromium plated screw including jointing

the trap with soil pipe in cement mortar (1:1) etc. all complete

as per specification.

EWC with P / S trap stanard size- 9.00 Each 3,150.10 28,350.90

Supplying all materials,labour and T&P for fixing plastic seat

and cover for wash down water closet with chromium plated

brass hinges and rubber buffers all complete as per

specification.

Supplying all materials,labour and T&P for fixing wash hand

basin with hole for pillar taps confirming to IS 2556:part4-2004

14 with cast iron /M.S. brackets painted white including cutting

holes in walls and making good to the damages etc. all

complete as per specification.

Supplying all materials,labour and T&P for fixing of 600x450

bevelled edge mirror of superior glass mounted on 6mm thick

15 ac sheet or ply wood sheet and fixed to wooden plugs with

chromium plated brass screws and washers etc. All complete

as per specification .

600mmx450mm size B.E.mirror

Supplying all materials,labour and T&P for fixing standard size

glass self with chromium plated brass brackets fixed to wooden

plugs with chromium plated brass screws and washers etc. all

complete as per specification.

Supplying all materials,labour and T&P for fixing standard size

C. P. towel rail fixed with chromium plated brass brackets fixed

to wooden plugs with cromium plated brass screws complete as

per specification.

0 CP towel rail-

Supplying all materials,labour and T&P for fixing of cromium

plated brass soap dish complete with chromium plated brass

brackets fixed to wooden plugs with chromium plated brass

screws as per specification.

CP soap dish-

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying all materials,labour and T&P for fixing standard size

19 C. P. towel ring fixed fixed to wooden plugs with cromium 9.00 Nos 546.80 4,921.20

plated brass screws complete as per specification.

Supplying all materials,labour and T&P for fixing of liquid soap

container - glass container or plastic container with chromium

plated brass lid and brackets fixed to wooden plugs with

chromium plated brass screws as per specification.

Supplying all materials,labour and T&P for fixing stainless steel

AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron

21 bracet and stainless steel plug including painting of fittings and

brackets ,cutting and making good to the walls etc. all as per

specification including cost of sink with all accessories.

Supplying fitting fixing of cromium plated CP over head shower

22 rose with arm including polishing and complete as per 4.00 Each 868.70 3,474.80

specification and direction of the Engineer in charge.

Supplying all labour and T&P for fixing CP Concealed stop

23 cocks polished bright confirming to IS:781-1995 of the 6.00 Each 1,121.60 6,729.60

following nominal sizes as per specification all complete.

Supplying all materials,labour and T&P for fixing Porcelain Flat

Back Stall Type Urinal respectively with waste pipe by means of

white lead mixed with chopped hemp etc. all complete as per

specification.

Fixing standard size Chromium Plated brass or glazed

porcelain Toilet paper holder fixed to woden plugs with

Chromium Plated brass screws complete as per specification

and direction of the Engineer in charge.

Supplying all materials, labour, T & P and constructing Gully

trap chamber of the following inside size with 8 cm thick R.C.C.

precast cover slab in CC (1:2:4) mix using 12mm size h.g.

chips, foundation concrete (1:4:8) using 40mm size h.g. metal

on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and

inside 12mm thick cement plastering (1:3) finished with a

floating coat of neat cement including fixing 100mm x100mm

size gully trap, 150mm x150mm C.I gratig etc. all complete as

per aproved drawing, specification and direction of Engineer-in-

charge.

250mmx250mm with RCC cover 10.00 Each 1,762.80 17,628.00

Constructing inspection chamber with R.C.C top slab in (1:2:4)

mix, foundation concrete (1:3:6), inside plaster 12mm thick with

cement mortar (1:3) finished with neat cement punning, 12mm

thick outside cement plaster (1:3), brick work with K.B bricks

2 having crushing strength not less than 75kg/cm ² with

dimensional tolerance ± 8 percent in cement mortar (1:5),

cement concrete (1:2:4) finished smooth using 12mm size h.g

chips, earthwork in excavation in all kinds of soil and refilling

the cavity around the chamber complete as per specification.

Inspection Chamber inside size 750mm x 750mm and 450mm 10.00 Each 14,248.00 1,42,480.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying all materials,labour and T&P for laying in trenches

unplasticized PVC pipes and specials of the following outside

dia. for all classes including jointing with approved solvent

cement by non-heat application method including testing as per

specification and direction of Engineer-in-charge etc. all

complete. [including earth work and cost of pipes.

a) 110 mm dia U-PVC pipes Class-3 50.00 mtr 1,125.30 56,265.00

b) 160 mm dia U-PVC pipes Class-3 25.00 mtr 2,659.00 66,475.00

Constructing manholes with R.C.C top slab in (1:2:4) mix,

foundation concrete (1:3:6), inside plaster 12mm thick with

cement mortar (1:3) finished with neat cement punning, 12mm

thick outside cement plaster (1:3), brick work with K.B bricks

4 having crushing strength not less than 75kg/cm ² with

dimensional tolerance ± 8 percent in cement mortar (1:5),

cement concrete (1:2:4) finished smooth using 12mm size h.g

chips, earthwork in excavation in all kinds of soil and refilling

the cavity around the chamber complete as per specification.

a) Plain Manholes inside size 900mm x 800mm and 450mm deep 2.00 each 19,257.30 38,514.60

5 Construction of 50 Users Septic Tank (3 No.s)

Earth work in excavation of foundation in all kinds of soil within

initial lead & 1.50m initial lift including rough dressing breaking

clods to maximum 5cm to 7cm & laying in layers not exceeding

0.3m depth. as directed by the Engineer-in-charge.

Filling in foundation trenches and plinth, with excavated earth in

layers including watering and ramming with all leads & lifts

including cost of all labour, T&P complete as directed by the

Engineer-in-charge.

Supplying & filling foundation and plinth with good quality river

sand well watered and rammed including cost of material,

labour, carriage, royalty, etc complete as directed by the

Engineer-in-charge.

Cement Concrete of proportion (1:4:8) in foundation and floors

using 4cm size hard granite C.B. metal of approved quality

from approved quarry including hoisting, lowering and laying

d) concrete in layers not exceeding 15cm thick to the required 5.55 Cum 6,198.50 34,392.38

level ramming, watering, curing etc. complete including cost,

carriage, royalty, cost of all labour as directed by the Engineer-

in-charge.

Cement Concrete (1:3:6) using 4cm size hard granite C.B.

metal approved quality from approved quarry including

including hoisting, lowering and laying concrete in layers not

exceeding 15cm thick to the required level ramming, watering,

curing etc. complete including cost, carriage, royalty, cost of all

labour as directed by the Engineer-in-charge.

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having

crushing strength not less than 75Kg/cm2 with dimensional

tolerance ± 2 percent in cement mortar (1:6) in foundation and

plinth including watering curing, cost of carriage and royalty of

all materials, cost of all labour as directed by the Engineer-in-

charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Providing 16mm thick C.P. (1:6) over brick masonary to the

smooth surface including watering, curing cost, carriage,

royalty, and taxes of all materials, cost of all labour, etc

complete as per the direction of Engineer-in-charge.

Providing 12 mm thick cement plaster with cement mortar of

mix (1:4) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls punning including

h) watering and curing with cost, conveyance, royalties of all 42.84 Sqm 211.60 9,064.93

materials with cost of all labour, and T&P required for the work

etc. complete in all respect as directed by the Engineer in

charge.

Providing HYSD reinforcement of approved quality confirming

to grade Fe-550D for R.C.C. work including cutting, bending,

binding and tying the grills and placing in position including cost

i) 15.37 Qntl 8,779.70 1,34,941.79

of binding wire 18 to 20 gauge and cost and carriage of steel.

etc. complete with labour cess, including 5% overlaaping &

wastage etc. as directed by the Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement

concrete of M-25 grade as per approved designs and drawings

having a minimum compressive strength (in work test) 250 Kg. /

Square cm. in 15 cm. cubes at 28 days after mixing and test

conducted in accordance with I.S. 516 using 12 mm. to 20 mm.

size black hard crushed broken granite stone chips and

screened and washed sharp sand for mortar of approved

quality from approved quarry, washed and cleaned ( 20mm.

size chips not to exceeds 25 % ) to be mixed in concrete

mixture with Portland slag cement (PSC) including hoisting,

j) lowering, laying and compaction concrete by using vibrators, 13.37 Cum 7,410.98 99,047.75

watering and curing for 28 days, centering and shuttering then

after dismantling and removing debris from the work site and

finishing the exposed surface smooth providing grooves or

beads wherever necessary including cost, conveyance, loading,

unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc. complete in

all respect as directed by the Engineer-in-Charge. But excluding

cost and conveyance of M.S. rods or Tor steel and binding

wires and labour charges for straightening, cutting, bending etc.

of M.S. rods or tor steel tying the grills and placing in proper

Supplying all materials, labour, T&P and making MS step iron in

20mm diameter MS steel bars and fixing into walls of man

k) hole/septic tank duly embedded in cement concrete (1:3:6) 30.00 Each 160.10 4,803.00

complete as per specification and direction of the Engineer in

charge.

Supplying all materials, labour, T&P and laying in trenches ( to

level or slope ) and jointing with provision of stiff mixture of

cement mortar in proportion of 1:1 for salt glazed stoneware

pipes, Grade — A of the following internal diameters including

testing of pipes and joints complete. 110mm diameter UPC

Constructing RCC soak way pit with R.C.C top slab in (1:2:4)

mix, inside plaster 12mm thick with cement mortar (1:3) finished

with neat cement punning, 12mm thick outside cement plaster

6 (1:3), brick work with K.B bricks having crushing strength not

less than 75kg/cm ² with dimensional tolerance ± 8 percent in

cement mortar (1:4), cement concrete (1:2:4) finished smooth

using 12mm size h.g chips, complete as per specification.

a) RCC soak way pit of size 1.5m x 1.8m deep 4.00 each 10,846.50 43,386.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying all materials,labour T&P and providing fitting

submersible pump with squarrel cage inspection type

7 submerssible type submersible electric motor to run on 3

phase/1 phase line voltage rangingfrom 320 volt to 450 volt

conforming to IS :8034/89

One no. 3 phase 2 H.P 3 stage head range 30 to 54 mtr.

Discharge 155 to 200 LMP with outlate dia 32mm.

b 2.5 Sq mm cable. 95.00 Mtr 154.00 14,630.00

c 40mm dia steel short piece. 2.00 Each 202.00 404.00

d Steel rope wit cover. 100.00 Mtr 35.40 3,540.00

e Well Cap. 1.00 Each 202.00 202.00

f 50mm size CI bracket. 1.00 Each 121.20 121.20

g 20mm dia rigid HDPE pipes. 100.00 Mtr 99.80 9,980.00

h Earth work up to 30 mtr. 30.00 Mtr 890.30 26,709.00

i Earth work Above 30 mtr. 70.00 Mtr 890.30 62,321.00

j 8'' ASTM pipe SCH-80 70.00 Mtr 2,290.46 1,60,332.20

k Delivery 1.00 Set 2,000.00 2,000.00

Labour charges for lowering of summerssible pumpset with

pipes and cables etc with testing and commissioning at site.

TOTAL PH WORK 2124872.40

TOTAL (CIVIL +ELECTRICAL +PH WORK) 2,01,32,258.7

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

GENERAL ABSTRACT

NAME OF PROJECT: DEVELOPMENT OF INFRASTRUCTURE AT

GANDAHATI WATERFALL

Description of Works Amount in Rs.

A. CIVIL WORK

1 PICNIC PINDI (10 No.s) 27,99,474.12

2 OFFICE & SERVER ROOM (1 No.s) 11,04,055.73

3 SECURITY ROOM (1 No.s) 6,13,985.28

4 FEMALE TOILET CUM BATH ROOM (1 No.s) 10,03,651.63

5 TOILET AT PINDI AREA (1 No.s) 4,89,278.94

6 FOOD KIOSK (3 No.s) 16,52,458.13

7 GAZEBO (1 No.s) 6,29,425.07

8 DRINKING WATER FACILITIES (1 No.s) 2,07,283.08

9 SHED AT FOOD KIOSK (1 No.s) 6,90,107.03

10 SHED AT HILL SIDE (1 No.s) 2,52,817.13

11 PAVER WAY (350 Sqm) 6,35,008.69

12 SITE DEVELOPMENT 9,80,036.68

13 RAILING & STEPS 5,16,584.06

14 SIGNAGES 1,52,530.81

15 DUSTBINS 49,200.00

16 TRELLIS, CHAIRS & BENCHES 4,66,628.23

17 LANDSCAPING 6,83,135.10

18 PLAY EQUIPEMENTS & SCULPTURES 9,12,630.00

19 ENTRANCE GATE (1 No.s) 9,51,440.18

20 RENOVATION & DISMANTLING WORK 57,665.78

21 SELFIE POINT (1 No.s) 1,67,362.74

22 BOUNDARY FENCING (250 Mt.) 4,62,633.02

SUB TOTAL (A) 154,77,391.43

B. ELECTRICAL WORK

i. INTERNAL ELECTRICAL WORK 12,27,897.20

ii. EXTERNAL ILLUMINATION 7,11,200.00

iii. CCTV SYSTEM 2,51,786.00

iv. FIRE EXTINGUISHERS 39,000.00

SUB TOTAL (B) 22,29,883.20

C. PH WORK

i. INTERNAL P.H. & SANITARY WORK 6,50,476.23

ii. SEPTIC TANK, SOAKPIT & I.C 9,17,833.78

iii. BOREWELL 3,11,289.40

SUB TOTAL (C) 18,79,599.41

D. TOTAL (A+B+C) 1,95,86,874.04

E. Add GST @ 18% on TOTAL (D) 18% 35,25,637.33

F. Project Cost with GST (D+E) 2,31,12,511.37

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

NAME OF PROJECT: DEVELOPMENT OF INFRASTRUCTURE AT GANDAHATI

WATERFALL

BILL OF QUANTITIES (CIVIL WORK)

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings, and trees girth upto

300 mm, removal of slumps of trees cut earlier and disposal of

1 unserviceable materials and stacking of servicable materials to 1572.87 Sqm 8.20 12897.53

be used or auctioned, upto a lead of 1000 metres including

removal and disposal of top organic soil not exceeding 150 mm

in thickness as per the direction of the Engineer-in-charge.

Earth work in excavation of foundation in all kinds of soil within

initial lead & 1.50m initial lift including rough dressing breaking

clods to maximum 5cm to 7cm & laying in layers not exceeding

0.3m depth. as directed by the Engineer-in-charge.

Filling in foundation trenches and plinth, with excavated earth in

layers including watering and ramming with all leads & lifts

including cost of all labour, T&P complete as directed by the

Engineer-in-charge.

Supplying & filling foundation and plinth with good quality river

sand well watered and rammed including cost of material,

labour, carriage, royalty, etc complete as directed by the

Engineer-in-charge.

Surface Filling-Construction of embackment with approved

material obtained from borrow pits with all lifts and leads,

transporting to site by mechanical means within a lead of 5kms,

spreading, grading to required slope and compacting to meet

requirement of table 300-2 & Clause 305 of MoSRT&H

Specifications for Road & Bridge works (4th Revision).

Supplying & filling site with good quality moorum (laterite)

6 rammed, including cost of material, labour, carriage, royalty, etc 245.00 Cum 850.20 208299.00

complete as directed by the Engineer-in-charge.

Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal

approved quality from approved quarry including including

hoisting, lowering and laying concrete in layers not exceeding

15cm thick to the required level ramming, watering, curing etc.

complete including cost, carriage, royalty, cost of all labour as

directed by the Engineer-in-charge.

Cement Concrete of proportion (1:4:8) in foundation and floors

using 4cm size hard granite C.B. metal of approved quality from

approved quarry including hoisting, lowering and laying concrete

in layers not exceeding 15cm thick to the required level

ramming, watering, curing etc. complete including cost, carriage,

royalty, cost of all labour as directed by the Engineer-in-charge.

Fixing 25 mm. dia anchor bars in foundation rock including

drilling 35 mm. dia holes, fixing wedged anchor and grouting with

cement mortar 1:4 complete as per the direction of Engineer-in-

charge excluding cost of M.S. rods for dams, barrages and

power house structures including pull testing of 30% of anchors.

(Depth of hole only to be measured for payment purpose).

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement: 3 coarse sand (zone- III) derived from natural sources: 6

graded stone aggregate 20 mm nominal size derived from

natural sources) over 75mm thick bed of dry brick ballast 40 mm

nominal size, well rammed and consolidated and grouted with

fine sand, including necessary excavation, levelling & dressing &

finishing the top smooth. Based on DAR-V1-2023-Item No. 4.17

Providing 2.5cm thick Damp Proof Course with cement concrete

(1:2:4) using 12mm size black hard granite crusher broken chips

and screened & washed sharp sand for mortar and finished

11 smooth to the rough surface of wall including watering and 98.35 Sqm 368.21 36213.45

curing with cost, conveyance, royalties of all materials with cost

of all labour, and T&P required for the work etc. complete in all

respect as directed by the Engineer in charge.

Providing and applying of pre-construction Anti-Termite

treatment specification and the holes should be pluged with

12 filling materials including cost of all materials, labour charges, 420.48 Sqm 135.20 56847.25

conveyance and all taxes, hire charges of machinaries etc.

complete as per direction of Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square

cm. in 15 cm. cubes at 28 days after mixing and test conducted

in accordance with I.S. 516 using 12 mm. to 20 mm. size black

hard crushed broken granite stone chips and screened and

washed sharp sand for mortar of approved quality from approved

quarry, washed and cleaned ( 20mm. size chips not to exceeds

25 % ) to be mixed in concrete mixture with Portland slag

cement (PSC) including hoisting, lowering, laying and

13 compaction concrete by using vibrators, watering and curing for

28 days, centering and shuttering then after dismantling and

removing debris from the work site and finishing the exposed

surface smooth providing grooves or beads wherever necessary

including cost, conveyance, loading, unloading, royalties and

taxes of all materials and cost of all labours, sundries, T & P

required of the work etc. complete in all respect as directed by

the Engineer-in-Charge. But excluding cost and conveyance of

M.S. rods or Tor steel and binding wires and labour charges for

straightening, cutting, bending etc. of M.S. rods or tor steel tying

the grills and placing in proper position.

a. Foundation 61.63 Cum 6734.33 415036.76

b. Plinth Beam 27.85 Cum 7599.67 211650.81

c. Columns

Ground Floor 10.64 Cum 15870.65 168863.72

d. Lintel Beam

Ground Floor 5.33 Cum 14337.73 76420.10

e. Chajja/Shelves

Ground Floor 30.73 Sqm 1242.99 38197.08

f. Roof Beam

Ground Floor 11.20 Cum 15870.65 177751.28

g. Slab

Ground Floor 17.38 Cum 13903.23 241638.14

h. Wall/Fin

Ground Floor 0.69 Cum 14886.80 10271.89

Providing HYSD reinforcement of approved quality confirming to

grade Fe-550D for R.C.C. work including cutting, bending,

binding and tying the grills and placing in position including cost

of binding wire 18 to 20 gauge and cost and carriage of steel.

etc. complete with labour cess, including 5% overlaaping &

wastage etc. as directed by the Engineer-in-charge.

a. Ground Floor 154.79 Qtl. 8779.70 1358991.33

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having

crushing strength not less than 75Kg/cm2 with dimensional

tolerance ± 2 percent in cement mortar (1:6) in foundation and

plinth including watering curing, cost of carriage and royalty of all

materials, cost of all labour as directed by the Engineer-in-

charge.

Ground Floor 173.33 Cum 5809.10 1006891.30

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having

crushing strength not less than 75Kg/cm2 with dimensional

tolerance ± 2 percent in cement mortar (1:6) in superstructure

including watering curing, cost of carriage and royalty of all

materials, cost of all labour as directed by the Engineer-in-

charge.

Ground Floor 117.51 Cum 5842.40 686540.42

Random rubble H.G. stone Masonary stone masonary in cement

mortar (1:6) in foundation and plinth with all cost,conveyance etc

complete in all respect as per the direction of the Engineer-in-

charge.

Ground Floor 6.48 Cum 4560.23 29550.29

Providing 20mm thick C.P. (1:4) over stone masonary to the

smooth surface including watering, curing cost, carriage, royalty,

and taxes of all materials, cost of all labour, etc complete as per

the direction of Engineer-in-charge.

Providing 16mm thick C.P. (1:6) over brick masonary to the

smooth surface including watering, curing cost, carriage, royalty,

and taxes of all materials, cost of all labour, etc complete as per

the direction of Engineer-in-charge.

Ground Floor 807.84 Sqm 271.40 219247.78

Providing 12mm thick C.P.(1:6) on brick masonary to the smooth

surface including watering, curing, cost, carriage, royalty of all

materials, cost of all labour, etc complete as directed by the

Engineer-in-charge.

Ground Floor 396.60 Sqm 188.40 74719.44

Providing 6mm thick C.P.(1:4) on brick masonary to the smooth

surface including watering, curing, cost, carriage, royalty of all

materials, cost of all labour, etc complete as directed by the

Engineer-in-charge.

Ground Floor 288.43 Sqm 209.64 60466.47

Providing 12 mm thick cement plaster with cement mortar of mix

(1:4) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls punning including

22 watering and curing with cost, conveyance, royalties of all

materials with cost of all labour, and T&P required for the work

etc. complete in all respect as directed by the Engineer in

charge.

Ground Floor 339.22 Sqm 208.20 70624.59

Supplying, fitting and fixing Vitrified tiles (600x600) in floors of

approved make conforming to IS:13755 laid on 20 mm thick

cement mortar (1:4) and filling joints with white cement and

epoxy sealant grouting of approved quality including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 390.85 Sqm 1318.20 515218.47

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying, fitting and fixing Vitrified tiles (600x600) in dados

skirting and risers of steps on 12mm thick CP (1:3) jointed with

neat cement slurry mixed with pigments to match the shade of

the tiles and epoxy sealant grouting including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 203.63 Sqm 1448.80 295019.14

Supplying, fitting and fixing Ceramic tiles (300x300) in floors of

approved make conformaing to IS:13755 laid on 20 mm thick

cement mortar (1:4) and filling joints with white cement and

epoxy sealant grouting of approved quality including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 28.38 Sqm 1033.70 29336.54

Supplying, fitting and fixing Ceramic tiles (300x450) in dados

skirting and risers of steps on 12mm thick CP (1:3) jointed with

neat cement slurry mixed with pigments to match the shade of

the tiles and epoxy sealant grouting including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 132.08 Sqm 1111.40 146793.71

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm

in floors of approved make conformaing to IS:13755 laid on 20

mm thick cement mortar (1:4) and filling joints with white cement

of approved quality and epoxy sealant grouting including cost of

all materials, labours ,T&P, carriage, royalty, taxes etc. required

for the work all complete as per direction of Engineer-in-charge.

Ground Floor 35.30 Sqm 3024.41 106761.55

Supplying, fitting and fixing Granite tiles of size above 0.40 sqm

in dados skirting and risers of steps on 12mm thick CP (1:3)

jointed with neat cement slurry mixed with pigments to match the

shade of the tiles and epoxy sealant grouting including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 12.01 Sqm 3078.50 36972.79

Supplying, fitting and fixing Kota tiles of size above 0.10 sqm in

floors of approved make conformaing to IS:13755 laid on 20 mm

thick cement mortar (1:4) and filling joints with white cement and

epoxy sealant grouting of approved quality including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 5.25 Sqm 1167.60 6129.89

Supplying, fitting and fixing Kota tiles of size above 0.10 sqm in

dados skirting and risers of steps on 12mm thick CP (1:3) jointed

with neat cement slurry mixed with pigments to match the shade

of the tiles and epoxy sealant grouting including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 1.43 Sqm 1221.70 1747.03

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying, fitting and fixing Chequred tiles in floors of approved

make conformaing to IS:13755 laid on 20 mm thick cement

mortar (1:4) and filling joints with white cement and epoxy

sealant grouting of approved quality including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 71.62 Sqm 806.00 57725.72

Supplying, fitting and fixing Chequred tiles in dados skirting and

risers of steps on 12mm thick CP (1:3) jointed with neat cement

slurry mixed with pigments to match the shade of the tiles and

epoxy sealant grouting including cost of all materials, labours

,T&P, carriage, royalty, taxes etc. required for the work all

complete as per direction of Engineer-in-charge.

Ground Floor 16.69 Sqm 936.60 15631.85

Finishing plastered wall surface with Cement based Wall putty

(water based) of approved make and finished smooth & even

surface to receive painting including cost of scaffolding etc. with

cost of all materials, labours ,T&P, carriage, royalty, taxes etc.

required for the work all complete as per direction of Engineer-

in-charge.

Inside

Ground Floor 1042.05 Sqm 102.70 107018.54

Outside

Ground Floor 463.26 Sqm 102.70 47576.80

Priming one coat with Wall Primer water bond cement primer

including cost of all materials, labours ,T&P, carriage, royalty,

taxes etc. required for the work all complete as per direction of

Engineer-in-charge.

Ground Floor 1505.31 Sqm 81.40 122532.23

Wall painting two coats with plastic emulsion paint of approved

shade on new work to give an even shade including cost of all

materials, labours ,T&P, carriage, royalty, taxes etc. required for

the work all complete as per direction of Engineer-in-charge.

Ground Floor 635.78 Sqm 107.60 68406.94

Wall painting two coat with any approved Weather coat paint

including cost of all materials, labours ,T&P, carriage, royalty,

taxes etc. required for the work all complete as per direction of

Engineer-in-charge.

Ground Floor 637.90 Sqm 99.68 63585.87

Wall painting with Textured Paint of approved quality of pattern

as specified in drawing including cost of all materials, labours

,T&P, carriage, royalty, taxes etc. required for the work all

complete as per direction of Engineer-in-charge.

Inside 231.63 Sqm 651.41 150886.01

Supplying and fitting-fixing of M.S work (section, flats, solid bars

& angle) as per approved drawing and design with cost of all

38 materials & labour, labour cess, T&P, sundries etc. complete in 8099.05 Kg 170.94 1384455.64

all respect as per specification & direction of the Engineer-in-

Charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying and fixing of rolling shutters of approved make, made

of required size M.S. laths, interlocked together through their

entire length and jointed together at the end by end locks,

mounted on specially designed pipe shaft with brackets, side

guides and arrangements for inside and outside locking with

39 push and pull operation complete, including the cost of providing 35.18 Sqm 4360.03 153364.12

and fixing necessary 27.5 cm long wire springs manufactured

from high tensile steel wire of adequate strength conforming to

IS: 4454 - part 1 and M.S. top cover of required thickness for

rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top

cover DAR-2023-V-1 Item No. 10.6.1 Page No. 747

Supplying and fitting-fixing of two rack Un-plasticised Poly Vinyl

Chloride (UPVC) sliding window of approved make with 6mm

40 thick glass of approved quality complete with frame, shutters and 19.80 Sqm 4960.97 98227.21

all fitting and fixtures etc. complete in all respect as per the

direction of the Engineer-in-Charge.

Supplying, fitting and fixing of 32mm thick flush door shutter with

approved quality of 30mm thick BWR block board pasted with

41 1mm thick sunmica on both side of approved design and quality 17.66 Sqm 10668.61 188407.65

including cost of all door fittings and fixtures etc. complete in all

respect as per the direction of the Engineer-in-Charge.

Supplying and fitting-fixing of factory made single leaf rigid FRP

(alternately called GRP) sandwich composite door shutter of

32mm thick laminated with two GRP skins with wood grain finish

fabricated using UV-stabilised Isopthalic Gelcoat and one layer

of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated

with orthopthalic palyester resin. The thickness of the skins shall

not be less than 3.00 mm Expanded Polystyrone(EPS) structural

foam panel of 29mm thickness and a density of 20kg/cu.mtr shall

be used as core material. Wooden reinforcements made of

seasoned sal wood block of cross section not less than

42 28mmx32mm and also necessary sal wood reinforcements for 14.19 Sqm 6172.10 87582.10

fitting the metal fittings such as tower bolts, aldrops, handles etc

shall be provided. A structural adhesive compatible with (EPS)

foam shall be used for bending the core material, the sal wood

reiforcements and the skins. The material and process for

manufacturing the door shutters shall conform to RV-TIFAC

composites Design Centre's standards and specifications and

the door shutters tested in conformation to IS: 4020-1998. The

finish of door shutter will be plain colour white/ Ivory/ Beige/ Light

grey/ Mahogany/ Teak wood or any other colour using high

quality pigments. Three heavy whight mild steel butt hinges type-

Supplying and fitting-fixing of factory made Solid WPC door

frame of size 95mmx55mm fabricated .The door frame consist of

four segments which are provided with plug-in-socket

arrangement in-situ in the mould. The segments are plugged in

and are joined together by means of screw. The WPC frame

shall be provided with The material and process for

43 manufacturing the door frames shall conform to Relavent 86.55 Rmt. 1114.30 96442.67

I.S.specification. The finish of door frame will be plain colour

white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak

wood/sand stone/Champagne/Pastel blue or any other colour

using high quality pigments complete in all respect as per

specification and direction of the Engineer in charge.

Priming one coat with Red Oxide primmer including cost of all

materials & labour, labour cess, T&P, sundries etc. complete in

all respect as per specification & direction of the Engineer-in-

Charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Painting two coats with approved Enamel paints of approved

colour, shade over a coat of primer including sand papering,

45 polishing the surface, cost, conveyances of all materials and 490.94 Sqm 182.05 89375.21

cost of all labour etc, complete as per specification & direction

of Engineer-in-charge.

Supplying, fitting and fixing of stainless steel of 304 grade in

hand railing using 50 mm dia of 2 mm thick circular pipe with

Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and

stainless square pipe bracing of size case as per approved

46 design and specification, buffing, polishing etc. with the cost, 1912.61 Kg 407.31 779033.87

conveyance taxes of all material, cost of all labour etc. complete

in all respect as per specification & direction of Engineer-in-

charge.

Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

47 x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 12.00 Each 221.00 2652.00

cement : 3 coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete as per

specification & direction of Engineer-in-charge.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10 mm and down gauge),

48 including finishing with cement mortar 1:3 (1 cement : 3 fine 103.54 Rmt. 186.00 19259.00

sand) as per standard design as per specification & direction of

Engineer-in-charge.

CNC Carved ACP Paneling - Designing, fabricating, testing,

installing and fixing in position Curtain Wall with CNC Carved

Aluminium Composite Panel Cladding, for all heights and all

levels etc. including : Providing, fabricating and supplying and

fixing panels of aluminium composite panel cladding in required

shape in metalic colour of approved shades made out of 3mm

thick aluminium composite panel material consisting of

Aluminium sheet (0.25mm thick). The aluminium composite

panel cladding sheet shall be coil coated, with PVDF coating of

approved colour and shade as specified using stainless steel

49 screws, nuts, bolts, washers, cleats, weather silicone sealant 20.09 Sqm 4605.00 92514.45

(Dowsil 789), backer rods etc.The Contractor shall provide

curtain wall with aluminium composite panel cladding, having all

the performance characteristics all complete , as per the

Architectural drawings, as per item description, as specified, as

per the approved shop drawings and as directed by the

Engineer-in-Charge.10Years warrenty with MTC(Make-Viva/Euro

Bond or Eq. Brand)

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

G.R.C. JALI -

Providing and fixing Glass Reinforced Concrete (GR.C) Screens

in approved size pattern, design, shadeand thickness of 50mm

on frame and design element in 30mm thick have weight

approximately between 3.5 4 Kg per Sq Ft and color of M/S

UniStone make or equivalent. The above weight and thickness is

considering dimensions of screens up to 2133mm in height and

1219mm in width and having at least 50% void space. The

screens should be made from '53 grade' White Portland Cement

manufactured by JK Cement' or equivalent, Quartz, Fine Silica

Sand, Alkali Resistant Glass Fiber manufactured by 'N.E.G

JAPAN or equivalent, Super Plasticizers manufactured by

"BASF or equivalent Polymers manufactured by 'BASF or

equivalent and UV resistant Synthetic inorganic pigments should

be used for pigmentation manufactured by 'BAYFERROX

(Germany) or equivalent. The material casting should take place

in FRP Molds. The fixing of Screens should be 'Dry fixing' Le to

be done with M.S Galvanized Clamps, fixtures and fasteners of

Hilti / Fischer. complete in all respect as per specification &

direction of the Engineer-in-Charge.

Providing 2.5cm thick Grading Concrete over roof slab with

cement concrete (1:2:2) using 6mm size black hard granite

crusher broken chips and screened & washed sharp sand for

mortar and finished smooth to the rough surface of slab

including watering and curing with cost, conveyance, royalties of

all materials with cost of all labour, labour cess and T&P

required for the work etc. complete in all respect as directed by

the Engineer in charge.

a. Ground Floor 95.75 Sqm 383.34 36704.38

Water Proofing Membrane Coating :(2 Component ) - Providing

& Appling Two Coats of Acrylic Polymer modified cementtious

Memberance coating with Sika /MYK/Equivalent (2 Component )

on roof slab with cost of all material, abour, labour cess and T&P

required for the work etc. complete in all respect as directed by

the Engineer in charge.

Supplying and fixing of 60mm thick cement concrete interlocking

paver block of M-30 grade of approved make, design, color and

53 size made by Block making machine with proper compaction laid 350.00 Sqm 779.21 272723.50

in required pattern etc. complete in all respect confirming to IRC

SP-63:2018 as directed by the Engineer-in-Charge.

Supplying and fixing of Pre Cast Kerb Stone of size 600mm x

300mm 150mm of M-30 grade of approved make, design, color

54 and size made by block making machine with proper compaction 450.00 Each 249.55 112297.50

fixed in required pattern etc. complete in all aspect confirming to

IS 5758:1984 as directed by the Engineer-in-Charge.

Add for plaster drip course/ groove in plastered surface or

55 moulding to R.C.C projections. DAR-2023-V-1-Item No. 5.30 350.75 Rmt. 68.09 23883.95

Page No. 287

Supplying fitting fixing of S-pan tile roofing sheet including fixing

of ridges winds ties etc, including cost of sheet all fittings but

excluding cost of wind ties and ridges complete in all respect as

per the direction of the Engineer-in-charge.

Removing old lime or cement plaster from walls including raking

57 out joints 12 mm deep and removing the debris within 50m lead 178.25 Sqm 56.45 10062.08

etc. all complete as per the direction of the Engineer-in-charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Dismantling and removing 2.5 cm. thick artificial stone flooring

including stacking the useful materials for reuse and removing

the debris within 50m lead as per the direction of the Engineer-

in-charge.

Dismantling brick or stone masonry in cement mortar 3m. Height

including stacking the useful materials for reuse and removing

the debris within 50m. lead as directed by the Engineer-in-

Charge.

Dismentaling & removing R.C.C columns beams, slab, staircase,

landing, lintels, including stacking the useful materials for the

reuse and removing the debries within 50 m lead as directed by

the Engineer-in-Charge.

Dismentaling & removing Doors, Windowss and ventilators

including Removal of frame, hinges, fastening and stacking the

useful materials for the reuse and removing the debries within 50

m lead as directed by the Engineer-in-Charge.

Dismantling G.C.I. or A.C. sheet roofing after carefully removing

the bolts and nuts including stacking of he materials for reuse

and removing the debris within 50m lead as directed by the

Engineer-in-Charge.

Dismentaling roof timbers of thatched roof including stacking the

63 useful materials for reuse and removing the debris within 50m. 3.60 Sqm 111.10 399.96

lead as per direction of Engineer-in-charge.

Dismentaling and removing old tiles flooring including removing

the base coarse and stacking the useful materials for reuse and

removing the debris within 50m lead as directed by the

Engineer-in-Charge.

Dismantling and removing old tiled cladding from walls including

racking out joints 12mm deep stacking the useful materials for

reuse and removing the debris within 50m lead as directed by

the Engineer-in-Charge.

Removing old grading plaster from roof slab,cleaning the surface

66 ,lowering the debris within 50m lead as per the direction of the 71.77 Sqm 86.40 6200.55

Engineer-in-charge.

Disposal of moorum/building rubbish/ malba/ similar

unserviceable, dismantled or waste material by mechanical

transport including loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km for all lifts,

complete as per directions of Engineer-in-charge.Note - item to

be applicable in urban areas having directions for restricted

hours for movement/ plying of load carrying motor vehicle of 3.5

cum or more. (DAR-2023-Page No. 85-Item No. 1.1.18)

Supplying, fixing and moulding FRP decorative entrance gate

(Jungle Theme Based) as per the approved design (considering

the wind pressure factor) and dimensions with 10 years warrenty

over product supported with M.S structure made with good

68 quality M.S sections including cost, conveyance, loading, 1.00 Each 862500.00 862500.00

unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc. but excluding

cost of foundation work complete in all respect as directed by the

Engineer-in-Charge.

Supplying, fixing and moulding FRP decorative selfie pont

(Waterfall Theme Based) as per the approved design

(considering the wind pressure factor) and dimensions with 10

years warrenty over product supported with M.S structure made

69 with good quality M.S sections including cost, conveyance, 1.00 Each 138000.00 138000.00

loading, unloading, royalties and taxes of all materials and cost

of all labours, sundries, T & P required of the work etc. but

excluding cost of foundation work complete in all respect as

directed by the Engineer-in-Charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying fitting fixing of S-pan tile roofing sheet including fixing

of ridges winds ties etc, including cost of sheet all fittings but

excluding cost of wind ties and ridges complete in all respect as

per the direction of the Engineer-in-charge.

Supplying and fixing of commercial water purifier (normal & cold)

71 complete in all respect as per the direction of the Engineer-in- 1.00 Each 139900.00 139900.00

charge. (Make- Eureka Forbes/Kent/HUL or eq. brand)

Providing and fixing sitemap for park type (waterproof) printed

72 over ss plate complete in all respect as per the direction of the 1.00 Each 6050.00 6050.00

Engineer-in-charge.

Providing and fixing signages for park type (waterproof) printed

73 over ss plate complete in all respect as per the direction of the 8.00 Each 1550.00 12400.00

Engineer-in-charge.

Providing and fixing decorative CC chairs for parks (3 Seater)

74 complete in all respect as per the direction of the Engineer-in- 5.00 Each 7500.00 37500.00

charge.

Providing and fixing decorative CC benches for parks complete

in all respect as per the direction of the Engineer-in-charge.

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm

mesh and 300 mm wideth for construction joints and chasing in

brick work for electrical conduits or water supply pipes including

cement slurry and pegs/nails with nailing machine as required

before pastering etc. complete in all respect as directed by the

Engineer-in-Charge.

Providing and fixing barbed wire fencing on M.S angle post by

means of staples and staining hooks by means of tying with G.I

wire and including cost of barbed wire, staples, hooks, tying

wires and labour, but excluding the cost of M.S angle post etc

complete in all respect as per the direction of the Engineer-in-

charge.

Supplying and stacking of good earth at site including royalty

and carriage upto 5 k m lead complete (earth measured in

stacks will be reduced by 20% for payment). DSR-Horticulture-

2020 Item No. 2.2 Page No. 225

Supplying and stacking sludge at site including royalty and

carriage upto 5 km lead complete (sludge measured in stacks

will be reduced by 8% for payment). DSR-Horticulture-2020 Item

No. 2.3 Page No. 225

Supplying and stacking at site dump manure from approved

source, including carriage upto 5 km lead complete (manure

80 measured in stacks will be reduced by 8% for payment) : 125.00 Cum 254.15 31768.75

Screened through sieve of I.S. designation 20 mm. DSR-

Horticulture-2020 Item No. 2.4.1 Page No. 226

Spreading of sludge, dump manure and good earth in required

thickness as per direction of officer-in-charge (cost of sludge,

dump manure and/ or good earth to be paid separately). DSR-

Horticulture-2020 Item No. 2.8 Page No. 228

Mixing earth and sludge or manure in the required proportion

82 specified or directed by the Officer-in-charge. DSR-Horticulture- 625.00 Cum 36.55 22843.75

2020 Item No. 2.9 Page No. 228

Providing and fixing Neelgiri/Mexican grass turf with earthy

50mm to 60mm thickness of existing ground prepared with

proper level and ramming with required tools wooden (Dhurmos)

and than rolling the surface with light roller make the surface

smoothen and light, watering with sprinkler and maintenance for

30 days or more till the grass establish properly as per direction

of officer incharge. DSR-Horticulture-2020 Item No. 2.33 Page

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of 2:1

by volume (2 parts of stacked volume of earth after reduction by

20% : 1 part of stacked volume of manure after reduction by 8%)

84 flooding with water, dressing including removal of rubbish and 148.00 Each 143.10 21178.80

surplus earth, if any, with all leads and lifts (cost of manure,

sludge or extra good earth if needed to be paid for separately).

Holes 90 cm dia, and 90 cm deep. DSR-Horticulture-2020 Item

No. 2.14.4 Page No. 85

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of 2:1

by volume (2 parts of stacked volume of earth after reduction by

20% : 1 part of stacked volume of manure after reduction by 8%)

85 flooding with water, dressing including removal of rubbish and 148.00 Each 43.75 6475.00

surplus earth, if any, with all leads and lifts (cost of manure,

sludge or extra good earth if needed to be paid for separately).

Holes 60 cm dia, and 60 cm deep. DSR-Horticulture-2020 Item

No. 2.14.3 Page No. 85

Providing and displaying trees and plants as per the direction of

engineer-in-charge.

Ashoka Pendula 5 No.s 1100.00 5500.00

Golden Duranta 5 No.s 100.00 500.00

Porchulaca 8 Colours 5 No.s 100.00 500.00

Eranthemum Yelllow 5 No.s 100.00 500.00

Eranthemum Blood Red 5 No.s 100.00 500.00

Heliconia Red 5 No.s 100.00 500.00

Heliconia Orange dwraf 5 No.s 400.00 2000.00

Heliconia Pink 5 No.s 200.00 1000.00

Heliconia Yellow 5 No.s 100.00 500.00

Elaeocarpus Grandiflorus 5 No.s 1200.00 6000.00

Acalypha Red 5 No.s 100.00 500.00

Acalypha Green 5 No.s 100.00 500.00

H T Rose 5 No.s 250.00 1250.00

Cestrun Nocturnum 5 No.s 100.00 500.00

Chrysanthemum 7 Var 5 No.s 550.00 2750.00

Chrysanthemum 10 Var 5 No.s 400.00 2000.00

Chrysanthemum 4 Var 5 No.s 300.00 1500.00

Chrysanthemum White 5 No.s 550.00 2750.00

Ixora Dwarf Var 5 No.s 150.00 750.00

Eugenia Dwarf 5 No.s 1800.00 9000.00

Tagar Nana 5 No.s 100.00 500.00

Terminalia Metallica Green 5 No.s 2500.00 12500.00

Bamboo Variegata 5 No.s 2500.00 12500.00

Alstonia Scolari 5 No.s 2000.00 10000.00

Avocado 5 No.s 2000.00 10000.00

Awala Grafted 5 No.s 1500.00 7500.00

Water Apple 5 No.s 1500.00 7500.00

Guava 5 No.s 1500.00 7500.00

Kashmir Rose White/Red/Pink 5 No.s 200.00 1000.00

Tabebuia Argentea 5 No.s 2500.00 12500.00

Mogra 5 No.s 100.00 500.00

Monstera Deliciosa 5 No.s 2500.00 12500.00

Parijatham Dwarf 5 No.s 100.00 500.00

Kamini 5 No.s 150.00 750.00

Merigold 5 No.s 150.00 750.00

Salvia 5 Colours 5 No.s 150.00 750.00

Bleeding Heart 5 No.s 150.00 750.00

Dalhia 5 No.s 250.00 1250.00

Travellers Spam 5 No.s 1200.00 6000.00

Thuja 5 No.s 800.00 4000.00

Addinium 5 No.s 700.00 3500.00

Poinsettia 5 No.s 150.00 750.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Sadabihari 5 No.s 150.00 750.00

Sugandharaj 5 No.s 150.00 750.00

Malli 5 No.s 150.00 750.00

Bhutan Tagara 5 No.s 150.00 750.00

Cosmos 5 No.s 100.00 500.00

Zinia 5 No.s 100.00 500.00

Pentas 5 No.s 150.00 750.00

Rohio 5 No.s 100.00 500.00

Camelia 5 No.s 900.00 4500.00

Arelia Ball 5 No.s 200.00 1000.00

Banglore Croton 5 No.s 200.00 1000.00

Pandanus 5 No.s 150.00 750.00

Gerbera 5 No.s 400.00 2000.00

Inca (Merigold) 5 No.s 150.00 750.00

Table Rose 5 No.s 100.00 500.00

Hoya 5 No.s 900.00 4500.00

Aglonema 5 No.s 900.00 4500.00

Provision for Solid Waste Collection Dustbin ( Made by Stain

87 less Steel) complete in all respect as per the direction of the 2 Each 5900.00 11800.00

Engineer-in-charge.

Provision for Glass Waste Collection Dustbin (Made by Stain

88 less Steel) complete in all respect as per the direction of the 2 Each 5900.00 11800.00

Engineer-in-charge.

Provision for Biological (Wet) Waste Collection Dustbin (Made by

89 Stain less Steel) complete in all respect as per the direction of 2 Each 5900.00 11800.00

the Engineer-in-charge.

Provision for Decorative Type Fiber Dustbin complete in all

respect as per the direction of the Engineer-in-charge.

Supply, fixing and installation of artificial sculptures including

91 material, labour and all necessary accessories as per the

direction of engineer-in-charge.

Tiger Big Size 1 No.s 29500.00 29500.00

Tiger Small Size 1 No.s 13900.00 13900.00

Peacock 1 No.s 9900.00 9900.00

Deer 1 No.s 10900.00 10900.00

Chimpanzee 1 No.s 26900.00 26900.00

Giraffe 1 No.s 13900.00 13900.00

Egret 1 No.s 5100.00 5100.00

Elephant with Synthetic Grass 1 No.s 134900.00 134900.00

Mother & Child with Synthetic Grass 1 No.s 135900.00 135900.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supply, fixing and installation of playing equipements including

92 material, labour and all necessary accessories as per the

direction of engineer-in-charge.

SPRING RIDER:-

Duck/Donald/Mickey/Fish, Area-1'x2', Height-1'-6'', Age group-2- 1 No.s 11990.00 11990.00

5 years

DELUXE SPRING RIDER:- Duck/Sea

Horse/Mickey/Fish, Area-1'x2', Height-1'- 6'', Age group-2-5 1 No.s 16390.00 16390.00

ROCKING BOAT:- Area-1'x5', Safe

Area-3'x7', Height-18'', Age group-2-6 years, Seat-FRP, Pipe- 25 1 No.s 21890.00 21890.00

mm, 20mm & 15mm ID G.I Medium Pipe.

THREE-IN-ONE:- (SEA-SAW-01, SWING-01, SLIDE-01).:- Area-

Safe Area-8'x12', Height-3'-6'', Age group-2-6 years, Seat-FRP,

Pipe- 40 mm, 25mm & 15mm ID G.I Medium Pipe.

SPRING SEE SAW (FOUR-SEATER):-

Area-2'x10', Safe Area-4'x14', Height- 24'', Age group-2-10

years, Seat-Plastic, Pipe- Main Pipe 10 Length of 65mm ID

G.I Pipe, Handle- 25mm & 20mm ID G.I Pipe.Medium Pipe.

ARCH SWING:- Area-4'x10', Safe Area- 4'x10', Height-7', Age

group-3-14 years, Seat-02 no Rubber Seat, Main Pipe- 65mm ID

B-Class G.I Pipe, Top Pipe- 50mm ID B-Class G.I Pipe, Chain-

8mm SS Chain Rubber Coated.

STRAIGHT NET CLIMBER:- Area-

2'x7', Safe Area-3'x8', Height-7', Age group-3-14 years,Main 1 No.s 30900.00 30900.00

Pipe-40mm ID B- Class GI Pipe, Rope-Nylon.

Multi-Purpose Play Unit:- Area-13 mtr X 9 mtr.

Consists of: -

1. Square Deck-7’ ht with FRP roof-01 no

2. Square Deck-5’ ht with FRP roof-04 no

3. Square Deck-3’ ht with FRP roof-01 no

4. Suspension Bridge-8’ long- 02no

5. Hanging Bridge-8’ long-01 no

6. FRP Tunnel-6’ long-02 no

7. Spiral Slide-7’ht: -01 no 1 No.s 325490.00 325490.00

8. Step Ladder: -02 no

9. Fire Man pole: - 01 no

10. Ship Ladder: - 01 no

11. Zebra Climber-5’ht.: - 01 no

12. Plain Slide-5’ ht.: -01 no

13. Handi Hold: - 01 no

14. Wave Slide-5’ ht.: -01 no

15. Bowl Slide-3’ ht.: -01 no

TOTAL CIVIL WORK 15477391.43

DETAIL ESTIMATE ELECTRICAl WORK

INTERNAL

A Sub-Head I (Modular Wiring Items)

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Recessed wirring to light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper

conductor of ISI marked with 20 mm dia PVC flexible non

metallic conduit FRLS type ISI marked 6A modular type (anti

bactorial & flame retradant type) switch ISI marked and ceiling

rose ISI marked Make- Anchor/Havells of modular type G.I

box with metallic cover plate (both side) (anti bactorial & flame

retradant type) of suitable size, modular box with 1.5 sq. Mm

1 FRLSH PVC insulated single core multistandard copper

conductor as earth wire including all accessories and connection

as per direction of Engineer -in -Charge. CATAGORY AS

FALLOWS ,complete suitable for IPH standard hospital. All the

switches & sockets should be warrantied for a replacement

period of 2 years against defects with ncessary test report &

Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free after sales service within

warranty period for acceptance of materials.

a) GROUP-A 125 Nos 555.00 69,375.00

a-1) GROUP-B 50 Nos 791.00 39,550.00

a-2) GROUP-C 50 Nos 1088.00 54,400.00

Group control of point in Recessed wirring to light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLSH/LSZH PVC insulated copper conductor of ISI marked

Make- 20 mm dia PVC flexible non metallic conduit FRLS type

ISI marked with 6A modular type((anti bactorial & falme

retradant type)) switch ISI marked , and ceiling rose ISI marked

of modular type G.I box with metallic cover plate (both side)(anti

bactorial & falme retradant type) , of suitable size, modular box

with 1.5 sq. Mm FRLS PVC insulated single core multistandard

copper conductor as earth wire including all accessories and

connection as per direction of Engineer -in -Charge.

CATAGORY AS FOLLOWS ,complete suitable for IPH standard

hospital.(Maximum 02 nos point in one circuit).All the switches &

sockets should be warrantied for a replacement period of 10

years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free aftersales service within warranty period

for acceptance of materials.

Supplying ,fixing of 6A Plug on the same board in existing

switch board with complete fitting by 01 no of 6A switch & socket

(modular type)( (anti bactorial & flame retradant type)) & other

required accessories of ISI marked as approved as per direction

of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor)

/Panasonic (vision) or equievalant reputed make & model A

c) catagory ISI marked as approved, complete suitable for IPH 28 Nos 193.00 5,404.00

standard hospital.(Maximum 02 nos point in one circuit).All the

switches & sockets should be warrantied for a replacement

period of 2 years against defects with ncessary test report &

Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supplying,fixing of 6A Plug on the separate board with complete

fitting by 01 no of 6A switch & socket(modular type)( (anti

bactorial & flame retradant type)) with suitable size modular box

& cover(anti bactorial & falme retradant type) including supplying

of all required accessories of ISI marked as approved as per

direction of engg-in-charge.. , complete suitable for IPH standard

hospital.(Maximum 02 nos point in one circuit).All the switches &

sockets should be warrantied for a period of 10 years against

manufacturing defects against which ncessary test report &

Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with

complete fitting by 01 no of 16A switch & socket(modular

type)((anti bactorial & flame retradant type)) with suitable size

modular box & cover(anti bactorial & falme retradant type)

including supplying of all required accessories of ISI marked as

e) approved as per direction of engg-in-charge, (For equipement 21 Nos 645.00 13,545.00

power)All the switches & sockets should be warrantied for a

replacement period of 10 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supplying,fixing of 2x6A+1X1 6A Plug on the separate board

with complete fitting by 01 no of 16A+2 no 6A switch &

socket(modular type) ( (anti bactorial & falme retradant type) with

suitable size modular box & metallic cover plate (both side)(anti

bactorial & falme retradant type)including supplying of all

required accessories of ISI marked as approved as per

f) direction of engg-in-charge.., (For equipement power)complete 6 Nos 1381.00 8,286.00

suitable for IPH standard hospital.(Maximum 02 nos point in one

circuit).All the switches & sockets should be warrantied for a

replacement period of 10 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board

with complete fitting by 01 no of 16A+3 nos 6A switch &

socket(modular type) ( (anti bactorial & falme retradant type) with

suitable size modular box & metallic cover plate (both side)(anti

bactorial & falme retradant type)including supplying of all

required accessories of ISI marked as approved as per

g) direction of engg-in-charge, (For equipement power)complete 12 Nos 1969.00 23,628.00

suitable for IPH standard hospital.(Maximum 02 nos point in one

circuit).All the switches & sockets should be warrantied for a

replacement period of 10 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free after sales

service within warranty period for acceptance of materials.

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLSH/LSZH insulated, copper conductor,

single core cable , in recessed PVC conduit Heavy duty FRLS

of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked

as approved) as required as per direction of Engg.-in-Charge.

Ncessary test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free after sales

service within warranty period for acceptance of materials

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

2 nos single core 1.5 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

continuty conductor. In 20 mm dia non metallic heavy duty

flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

2 nos single core 2.5 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

b) continuty conductor in 20 mm dia non metallic heavy duty 210 Mtr 145.00 30,450.00

flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER

POINT TO EACH QTR) (2X2.5+1X1.5)

4 nos single core 2.5 sq. mm copper wire for phase and neutral

and 02 nos of single core 2.5 sq. mm copper wire for earth

continuty conductor .in 25 mm dia non metallic heavy duty

flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)

2 nos single core 4 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

continuty conductor in 20 mm dia non metallic heavy duty

flexible conduit .(PDB to PSB/ GAYSER POINT/AC

POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG

PANEL ESSENTIAL LOAD) (2X4+1X1.5)

Supplying and fixing 20 amps, 240 volts, SPN, industrial type

socket outlet, with 2 pole and earth metal enclosed plug top

along with 32 amps. C-series, SP MCB, in sheet steel enclosure,

on surface or in recess, with chained metal cover for the socket

outlet, and complete with connections, testing and

3 commissioning etc. as required as per direction of Engg.-in- 30 Nos 616.00 18,480.00

Charge.. .All the Components should be warrantied for a

replacement period of 5 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supplying and fixing 32 amps, 415 volts, TPN, industrial type

socket outlet, with 4 pole and earth metal enclosed plug top

along with 32 amps. C-series, TP MCB, in sheet steel enclosure,

on surface or in recess, with chained metal cover for the socket

outlet, and complete with connections, testing and

commissioning etc. as required as per direction of Engg.-in-

Charge.. . Equievalant higher model of .All the Components

should be warrantied for a replacement period of 5 years

against defects with ncessary test report & Warrnaty certificate

to be submitted to the department for genuinity of product & to

avail free aftersales service within warranty period for

acceptance of materials.

Supplying and fixing following size/ modules, GI box along with

modular base & metallic cover plate (both side)(anti bactorial

type) plate for modular switches in recess etc as required as per

direction of Engg.-in-Charge. .All the Components should be

5 warrantied for a replacement period of 5 years against defects

with ncessary test report & Warrnaty certificate to be submitted

to the department for genuinity of product & to avail free

aftersales service within warranty period for acceptance of

materials.

a) 4 moudle(125mmx75mm) 28 Nos 267.00 7,476.00

b) 1 moudle(75mmx75mm) 48 Nos 220.00 10,560.00

c) 12 moudle(200mmx150mm) 12 Nos 482.00 5,784.00

Supplying and fixing of following sizes of medium class PVC

FRLS conduit ISI marked along with accessories in

6 surface/recess including cutting the wall and making good the

same in case of recessed conduit as required as per direction of

Engg.-in-Charge

a) 20 MM 180 mtrs 98.00 17,640.00

b) 25 MM 60 mtrs 100.00 6,000.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.04.28 19:05:28 IST

DESCRIPTION OF ITEM QUANTITY UNIT RATE AMOUNT

Supply and fixing modular type indicator on the existing switch

box/cover . Equievalant higher model of

Schneider/Hager/Siemens/Anchor/Panasonic make or

equievalant reputed make & model A catagory ISI marked as

approved as required as per direction of Engg.-in-Charge.All the

Components should be warrantied for a replacement period of 5

years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of