WBHOUSING/AE/KSSD-II/e-NIT-21 OF 2025-26

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Enginee -in- Charge.

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. First Floor

Second Floor

Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge. First Floor

Second Floor

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Second Floor

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous& Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance:Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area ofbuilding e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. setin 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side oftiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thicklayer applied directly over finished artificial stone floor/ Mosaic etc withoutanybacking course) laid after application slurry using 1.75 Kg of cement per Sqmbelow mortar only, joints grouted with admixture of white cement and colouringpigment to match with colour of tiles/ epoxy grout materials of approved make asdirected and removal of wax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finish complete includingthe cost of materials, labour and all other incidental charges complete true to themanufacturer's specification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be supplied by the contractor). b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N First Floor

Second Floor

Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. c) 25mm thick (Without XPM / IRC)

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) a) Upto area 2.5 Sq.m

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local First Floor

Second Floor

Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor (ii) 35mm thick shutters. (b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. First Floor

Second Floor

Easing door and windows.

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m)

Renewing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete (1:2:4) including cutting of brick work/concrete work as per direction. (Cost of concrete will be paid separately ) (c) 40mm X 6mm, 125mm Length

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety First Floor

Second Floor

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (iv) 75mm. X 47mm. X 1.70mm.

(vii) 100mm. X 58mm. X 1.90mm.

Iron socket bolt of approved quality fitted and fixed complete. d) 225mm long x 10mm dia bolt.

(c) 150mm long x 10mm dia bolt.

Iron catch hook of approved quality fitted and fixed to shutter and chowkat. (b) 6mm dia x 225mm long.

Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.

Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in- Charge. First Floor

Second Floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster First Floor

Second Floor

(i) With 1:6 cement mortar (b) 20 mm thick plaster First Floor

Second Floor

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : a) On timber or plastered surface : With super gloss (hi-gloss) - iv) Two coats (with any shade except white)

(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Labour for dismantling G.I. pipe with fittings 15 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps,including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes 20 mm

Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (Q) Ball Valve (Dia) 20 mm

Supplying, fitting and fixing bib cock or stop cock. e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing shower of approved brand and make. (g) PTMT overhead shower ( Prayag or equivalent) (i) 75 mm round

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) EWC (ii) Plastic (hallow type) black ¨
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm

捯獫‬⹃⹐眠獡整映瑩楴杮⁳景㌠′浭搠慩Ⱞ漠敮愠灰潲敶⁤畱污瑩⁹牢獡⁳⹃⹐瀠汩慬⁲潣正漠⁦㔱洠楤⹡‬⹃⹐挠慨湩眠瑩⁨畲扢牥瀠畬⁧景㌠‰浭搠慩Ⱞ愠灰潲敶⁤畱污瑩⁹⹐⹖⹃眠獡整瀠灩⁥楷桴䌠倮‮畮⁴㈳洠楤⹡‬〹‰浭氠湯⁧灡牰癯摥焠慵楬祴倠嘮䌮‮潣湮捥楴湯瀠灩⁥楷桴栠慥祶戠慲獳䌠倮‮畮⁴湩汣摵湩⁧敭摮湩⁧潧摯愠汬搠浡条獥愠摮瀠楡瑮湩⁧桴⁥牢捡敫獴眠瑩⁨睴潣瑡⁳景愠灰潲敶⁤慰湩⹴⠊楩 㔵‰浭堠㐠〰洠楳敺ǿ™Ĉ匀灵汰楹杮‬楦瑴湩⁧湡⁤楦楸杮猠慴湩敬獳猠整汥猠湩潣灭敬整眠瑩⁨慷瑳⁥楦瑴湩獧愠摮琠潷挠慯獴漠⁦慰湩楴杮漠⁦⹃⹉戠慲正瑥⹳⠊楩 ㌶‰浭堠㔠〵洠⁘㠱‰浭|šĈ匀灵汰楹杮昬瑩楴杮愠摮映硩湩⁧灡牰癯摥戠慲摮倠嘮䌮‮佃乎䍅佔⁒桷瑩⁥汦硥扩敬‬楷桴戠瑯⁨湥獤挠畯汰湩⁧楷桴栠慥祶戠慲獳䌠倮‮畮ⱴㄠ‵浭搠慩⠊楩 㔴‰浭氠湯詧ሀ漀畓灰祬湩Ⱨ映瑩楴杮愠摮映硩湩⁧潴敷慲汩眠瑩⁨睴牢捡敫獴ਮ愨 ⹃⹐漠敶⁲牢獡ੳ椨⥩㈠‵浭搠慩‮湡⁤㔷‰浭氠湯顧ࠀ
畓灰祬湩Ⱨ映瑩楴杮愠摮映硩湩⁧敢敶汬摥攠杤摥洠物潲⁲⸵‵浭琠楨正猠汩敶⁲敲⁤獡瀠牥䤠匮‮㐳㠳⼠ㄠ㘹‵潴敧桴牥眠瑩⁨牢獡⁳⹃⹐栠湩敧ੳ椨⥩㘠〰洠⁘㔴‰浭„vĈ匀灵汰⁹景唠噐⁃楰数⁳䈨吠灹⥥☠映瑩楴杮⁳潣普牯業杮琠卉ㄭ㔳㈹ㄭ㤹ਲ䄨 椨 楓杮敬匠捯敫整⁤″敍整⁲敌杮桴⠊⥢ㄠ〱洠䕭ሀ─䈨 楆瑴湩獧椊⥶䐠潯⁲敔⡥䡌 …刨⥈㔠癸楩⥩圠䌮‮潃湮捥潴⁲㐨〵洠潬杮 ⁗ 楬牰湩੧㔷洠⥭楸⥩䐠潯⁲敂摮⠠䡌 …刨⥈†ਠ戨 ㄱ‰浭⤠楸⥶䌠潲獳吠敥眠瑩⁨潄牯†††⠊⥢ㄠ〱洠⵭癸 敖瑮䌠睯††††††††††⠊⥢ㄠ〱洠

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Sub Total

Please Enable Macros to View BoQ information