REPAIR /REPLACEMENT TO JOINARY IN MD ACCN , CLEANING OF WATER TANKS, REPAIRS TO INTERNAL WATER SUPPLY LINES AND CLEANING OF OHT INCL REPLACEMENT OF BROKEN TANKS OF AGE BR-1 AREA AT BABINA CANTT

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each etc complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed

Refixing shutter of any description exc 1 Sqm but n exc 2 sqm each in same opening etc complete all as specified and as directed

Refixing shutter of any description exc 2 Sqm each in same opening etc complete all as specified and as directed

S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing etc complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed

S&F, Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified .

S&F, Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ mtr including providing necessary joining cleats, glazing clips, ruber neoprene packing, aluminium cast handles ( Disc type ) 2 Nos , hinges 100 mm long type B-21 -3 Nos , aluminium anodised tower bolt 200 mm long -2 Nos in one door shutter , anodised aluminum snap beading and steel screws as reuired etc. complete all as specified.

M&L, Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/mtr including providing necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

M&L, Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in one shutter complete all as specified. Note : The minimum thickness of powder coating shall be 50 Micron .

Supply only coloured tinted glass and glazing with beading of any size of 5.5 mm thick complete all as specified and as directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed.

S&F, aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed

S&F, aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed

S&F, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 300mm long etc complete all as specified and as directed

S&F, plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed 2nd class Hard wood (SAL ) etc complete all as specified and as directed.

S&F, Pressed steel frames for doors(125x60) mm using 1.25 mm thick mild sttel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete incl providing PCC 1:3:6 Type C-1 using 20 mm graded stone aggregates and 1 No 10 mm dia deformed bar etc complete all as specified and directed . Note : The cost of PCC ,bottem bar 10 mm dia , hinges ( 6 Nos ) deemed to be included in unit rate quoted by the tenderer.

S&F, Pressed steel frames for doors(105x60) mm using 1.25 mm thick mild steel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete incl providing PCC 1:2:4 Type B-1 using 20 mm graded stone aggregates and 1 no deformed bar 10 mm dia at bottom etc complete all as specified and directed . Note : The cost of PCC ,bottom bar and hinges ( 3 Nos ) deemed to be included in unit rate quoted by the tenderer.

S&F, FACTORY MADE plain framed paneled shutter 35 mm thick IInd class HW (Two numbers panel) with lock rail and panel of 12 mm thick type AB , BWR grade , the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed

S&F, FACTORY MADE 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S&F, FACTORY MADE 35 mm thick IInd class HW partly paneled& Partly gauged & skeleton shutters open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S&F, 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

All as per item No, 22 above FACTORY MADE but 30 mm thick windows, ventilators etc provided with stiles and rails as specified in SSR Pt-I Sec 8 clause 8.24 (b) etc complete all as specified and as directed

S&F plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads 2nd class HW sectional area exc 6 Sqcm but n exc 13 sqcm etc complete all as specified and as directed

Supply only 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane etc complete all as specified and as directed

S&F in repair 3 mm thick sheet glass, Ordinary quality and glazing with wooden beads in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround complete all as specified and as directed etc complete all as specified and as directed

Supply only galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of apertare 1.00 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed

S&F, in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.00 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed

S&F, butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and as directed

S&F, butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed

S&F, Aluminium handles, cast type, anodised 100mm size etc complete all as specified and as directed

S&F, Aluminium handles, cast type, anodised 125mm size etc complete all as specified and as directed

S&F, aluminium anodised barrel tower bolts of extruded section 150mm size etc complete all as specified and as directed

S&F, aluminium anodised barrel tower bolts of extruded section 200mm size etc complete all as specified and as directed

S&F, mild steel slliding door bolts, plate type, stove enamelled black with bright bolt not less thatn 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 300mm long etc complete all as specified and as directed

M&L, prepairing surfaces of wood and wood based material, steel and iron work, new or old, of any desctiption and girth not otherwise desctibed and treated with tar or coal tar black paint etc complete all as specified and as directed

S&F, mild steel flat iron 25x3 mm as in hold fasts etc all as specified, Confirming to Fe 410-0 or Fe 310-0etc complete all as specified and as directed

M&L for preparing and treating small articles such as stop, cover, hold fasts etc back of chowkhat etc area n.exc 0.1 sqm each etc with tar or coal tar paint as directed complete all as specified and as directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement concrete 1:2:4 type B0 using 12.5 mm grade stone aggregates for exc half brick but not exc full brick wall etc compelte as directed

M&L, PCC 1:3:6 type C1 using 20 mm graded stone aggregates as in coping or bed plates for filling in holes of hold fasts or in pressed steel frame including necessary use and waste of form work etc complete all as specified and as directed

M&L applying two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

M&L, framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 etc complete all as specified and as directed

S&F, 1mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed

S&F in repair FACTORY FABRICATED Steel window or ventilator fixed type with glazing bars etc complete all as specified and as directed

S&F, in repairs FACTORY FABRICATED Steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and as directed

S&F, in repairs FACTORY FABRICATED Steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and as directed

Supply only small fittings such as bracket of any type latch and hing block, shaped doors and window stops and the like incl all necessary articles n.exc 200 cucm each IInd HW complete all as specified etc complete all as specified and as directed

M&L, applying two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

S&F, in repair 225 mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed

S&F, 19/20 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and as directed.

S&F, 12 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in pelmet boxes etc.n. exc. 15 cm width to timber frame work etc complete.

M&L, 25 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed with screws to timber frame work as in pelmet boxes width n.exc 15cm each, rebated or flat edged complete all as specified and directed.

M&L, for external teak wood lipping 6mm thick and 19/20mm wide fixed with nails on edges of pelmet boxes incuding wooden polishing on beading etc complete all as specified and as directed.

S&F Hasp & staple safety type aluminium anodized with mild steel hinge pin incl bolt to hinge plate and fixed with screws 100mm size etc complete all as specified and as directed.

S&F, Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete all as specified and as directed.

S&F, 40mm dia mild steel bright finished cupboard knobs fixed with screw and washer etc complete all as specified and as directed

S&F, in repair aluminium (extruded section body) door closer hydraulic regulated designation No 3 uiversal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and as directed. Make : Sandhu/ZIP

Taking down unserviceable aluminium shutter of any description exc 1 but n.exc 2 Sqm each making easing, servicable, replacing rubber beading and refixing in the same opening complete all as specified and as directed.

Taking down unserviceable aluminium shutter of any description n.exc 1 Sqm each making easing, servicable, replacing rubber beading and refixing in the same opening complete all as specified and as directed .

S&F, floor door Stoper (140mm overall length of cover plate) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed

S&F, in repair Mortice lock alumunium body, vertical type of size 100mm of 7 levers etc compete all as specified and as directed

Cleaning and removing all scale and dirt , etc from tanks and from mouths of circulating pipes etc exc 250 ltr & not exc 500 ltr capacity including disconnecting and setting aside or refixing in old position and as directed. Note: Date of cleaning to be mentioned with black/white synthetic enamelled paint after cleaning of tank by the contractor without any extra cost to the Govt .

Cleaning and removing all scale and dirt , etc from tanks and from mouths of circulating pipes etc 1000 ltr capacity including disconnecting and setting aside or refixing in old position and as directed. Note: Date of cleaning to be mentioned with black/white synthetic enamelled paint after cleaning of tank by the contractor without any extra cost to the Govt .

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm bore

All as item No 66 above but 20mm bore

All as per item No.66 above but 25mm bore

Supply and fixing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for 15 mm bore and including cutting through walls floors etc.

All as per item No.69 above but 20mm bore

All as per item No.69 above but 25mm bore

Fixing only old steel tubing and connections obtained from taking down herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings for 15 mm

All as per item No.72 above but 20mm bore

All as per item No.72 above but 25mm bore

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) Triple layered construction hoisted and fixed in position including S&F 20mm bore GI pipe medium grade washout pipe 450mm long with plug and 20mm bore GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed.

S & F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) Triple layered construction hoisted and fixed in position including S&F 20mm bore GI pipe medium grade washout pipe 450mm long with plug and 20mm bore GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed .

S& F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm 210 gm) complete all as specified

S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm 210 gm) complete all as specified

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F in repair 15mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Demolition of Brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed

M&Lfor brick work with sub class 'B'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed

M&L rendering 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall surface finished even smooth with out using extra cement complete all as directed .

Preparing on new decorated plastered or unplastered surfaces of wall and applying two coats of white wash complete.

S&F PVC lid/cover in two layered construction with locking arrangements suitable for 500/1000 ltr capacity PVC water tank complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, capacity exe 250 ltr but n.exe500 ltr all as directed.

Ms Vinay constructions

M/s Ravi Traders

M/S RAJ KUMAR SINGH

G.R.associates