RENOVATION OF HT SUBSTATION AND REPLACEMENT OF OUTLIVED FEEDER PANEL AND PROVISION OF HT TAPPING ISOLATION POINT AT STAFF QTRS. TALAB TILLO JAMMU

Amount

Supplying, installation, testing and commissioning of LT Panel suitable for operation on 415 V, 3 phase, 50 Hz, 4 wire AC supply system of cubicle design, outdoor, Double door type with hut type top for weather protection etc. fabricated in compartmentalized design from 2mm SWG CRCA sheet steel, partition out of 1.6 mm sheet & gland plate out of 3mm thick sheet vermin proof duly powder coated including cleaning, degreasing, scrubbing, finishing etc. and processed complete with powder coating in approved shade, having 2 nos earth studs, interconnections between switchgears, gland plates and suitable frame made out of 40mm x 40mm x 5mm angle iron of suitable height. height complete with transportation upto site, loading, unloading etc. and installation/fixing on the existing CC foundation including digging / cutting the foundation etc. including minor civil work, sign writing etc. complete as per site requirement including providing and fixing of following switchgear in panel etc as required:- (A) INCOMER (i) MCCB 400 Amp 4 pole 30 KA M/S L&T/ Scheinder/ Siemen/ Similar superior make) ---- 01 No (ii) Voltmeter 0-500 Volt ---- 01 No (iii) Ammeter, 0-300 Ampere with CTs ---- 01 No. (iv) L.E.D type Indicators for RYB ---- 01 Set . (B)OUTGOING (i) MCCB 250 Amp 4 pole 30 KA M/S L&T/ Scheinder/ Siemen/Similar superior make) --- 03 No (ii) MCCB 125 Amp 4 pole 30 KA M/S L&T/ Scheinder / Siemen / Similar superior make) --- 02 No (iii) High conductive electrolyte grade aluminium (E-91) Busbar TP&N of duly color coated with heat shrinkable sleeves.

Replacement of faulty / burnt LT cable of 1.1 KV grade with 3.5 x 120 sqmm XPLE insulated aluminum conductor steel armored cable of 1.1 KV grade including laying on surface/ wall/pole etc. complete as required.

Supplying and making end termination with brass compression gland and aluminum lugs for 3.5 x 120 sqmm of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.

Providing & fixing 6 SWG GI supporting wire for supporting the LT cable on pole i/c providing S type MS/GI supporting clamps at required distance etc as required.

Jaima Electricals (BID ID -874401)

AKHTAR ELECTRICALS (BID ID -871951)

FAIRDEAL ENTERPRISES (BID ID -873101)

FAVOURITE ELECTRICALS (BID ID -874250)