REPAIR OF ROOF, SUNKEN FLOOR, FALSE CEILING, RAIN WATER PIPE ETC OF UNRESTRICTED AREA OF COD UNDER AGE B/R-II OF GE (EAST) JABALPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for non skid coloured ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for glazed coloured ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coat of cement based paint over a coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over a coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceiling and apply three coat of white wash on prepared ceiling surface complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete surfaces complete all as specified and directed.

M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over a coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on brick work or concrete surfaces complete all as specified and directed.

M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces & applying one coat of white wash on brick work or concrete surfaces complete all as specified and directed.omplete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces & applying one coat of cement based paint on brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces & applying one coat of oil bound distemper on brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of old painted ceiling surfaces & applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of old painted Wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

Taking down of old existing water proofing treatment on roof surface (Horizontal & Vertical surfaces), including properly cleaning & drying the concrete surfaces complete all as specified and directed.

Supplying and providing water proofing treatment over cleaned roof/chajja/vertical surface with 3mm thick polymeric standard water proofing APP membrane wt not less than 3 kg/m2 comprising of the following for non approachable roof including cleaning, sweeping and washing with water to remove all dust etc from the plastered roof surfece or walls applying a coat of hot air blown bitumen of grade 82/25 confirming to IS 702 @ 1.20 kg/m2 over a coat of bitumen primer @ 0.3 kg /m2 on prepared surface weight of APP membrane not less than 3 kg/m2 with 100 mm over laps with sides and end . the over lap shall be sealed flame including with vertical surface after cutting necessary grooves and making good with PCC gala 1:2:4 type B1 etc adhere to hot blown bitumen all as per manufacturere instruction (i) over membrane applying a coat of hot applying bitumen of grade 85/25 confirming to ISD 702 @ 0.75 Kg/sqm binding material such as dry condition minimum shall be dusted over bitumen including cement slurry 3Kg/Sqm, including two coat of aluminium paint complete all as specified and directed.

Supplying and providing water proofing treatment over cleaned roof/chajja/vertical surface with 3mm thick polymeric standard water proofing APP membrane wt not less than 3 kg/m2 comprising of the following for approachable roof including cleaning, sweeping and washing with water to remove all dust etc from the plastered roof surfece or walls applying a coat of hot air blown bitumen of grade 82/25 confirming to IS 702 @ 1.20 kg/m2 over a coat of bitumen primer @ 0.3 kg /m2 on prepared surface weight of APP membrane not less than 3 kg/m2 with 100 mm over laps with sides and end . the over lap shall be sealed flame including with vertical surface after cutting necessary grooves and making good with PCC gala 1:2:4 type B1 etc adhere to hot blown bitumen all as per manufacturere instruction (i) over membrane applying a coat of hot applying bitumen of grade 85/25 confirming to ISD 702 @ 0.75 Kg/sqm binding material such as dry condition minimum shall be dusted over bitumen including cement slurry 3Kg/Sqm, including two coat of aluminium paint complete all as specified and directed.

M&L for cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement & no pigment over & including 15 mm thick screed bed or bedding layer of CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60 cm in height, copings, roof padding, sunken slab, benching, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for removing surplus demolished material to a distance exc 250 m but n.exc 500 metre & depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

M&L for cleaning the concerned reinforced cement concrete surface by means of wire brush to expose the concrete surface, which should be free from all loose particles, dust, laitance, etc complete all as specified and directed.

M&L for making corner fillets with Polymer Modified Cementitious (PMC) Mortar (PMC: C:M :: 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with Polymer Modified Cementitious (PMC) Mortar complete all as specified and directed.

M&L for the joints of pipes and concrete or masonry are to be sealed with epoxy putty or epoxy mortar (PMC:C :: 1:2 by weight) and the same is semi-rounded upto 5 mm above surface level all along the periphery of PVC or CI pipes complete all as specified and directed.

M&L for application of one coat of Acrylic Polymer Modified Cementitious (APMC) slurry (APMC:C :: 1:2 by weight) coating over the Reinforced Cement Concrete slab surface and carried upto finished floor level on vertical portion (walls) complete all as specified and directed. Note : This coat is allowed to get dry for 4-6 hours.

M&L for application of one coat of Acrylic Polymer Modified Cementitious topping rendering (APMC:C:M :: 1:2:2) 1-1.5 mm thick over the first coat of Acrylic Polymer Modified Cementitious (APMC) slurry coating complete all as specified and directed. Note : This coat is cured for 48 hours.

M&L for rendering 15 mm thick in one layer in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with liquid water proofing compound (water proofing compound to be measured & paid separately as supply only) complete all as specified and directed.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L for cement Concrete 1:3:6 type C-2, using 40 mm graded brick coarse aggregate in sunken floors, filling & mass concrete complete all as specified and directed.

M&L for 100 mm thick, Cement Concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as sub base of floor complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.

S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.

S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.

S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.

S&F in repair PVC Tank cover for Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed.

Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing complete all as specified and directed.

Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing complete all as specified and directed.

S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 20 mm bore of pipe complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 250 ltr & n.exc 500 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 500 ltr & n.exc 1000 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in repair 15 mm bore, Fancy type, Chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles. Complete all as specified and directed.

Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.

S&F in repair, brass chromium plated Wall Mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, chromium plated Two-way Bib Cock for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair, 32 mm bore, brass chromium plated bottle traps for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed.

S&F in repair, 32 mm bore, PVC waste pipe for wash basin/kitchen sink etc complete all as specified and directed.

S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (minimum weight 32 mm-45 gms) etc complete all as specified and directed.

S&F in repair, 32 mm dia of bore, waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair, chromium plated grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed.

S&F in repair, toilet seat/commode Jet Spray (Regular Type) (1.50 meter) Stainless Steel Grade 304 (built-in installation type) for 15 mm dia of bore of pipe complete all as specified and directed.

S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed.

S&F in repair, vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed.

S&F in repair, vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair, vitreous china squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed.

S&F in repair, sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair, sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed.

S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair, internal fitting for 10 ltrs capacity PVC valveless, syphonic action type flushing cistern complete all as specified and directed.

S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair, Brass Chromium Plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed.

S&F in repair, 75 mm diameter of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair, Soap Dish Holder any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S&F in repair, Corner Glass Shelf with brackets. Complete all as specified and directed complete all as specified and directed.

S&F in repair, Stainless Steel Double Coat Hook. Complete all as specified and directed complete all as specified and directed.

S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair, toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair, single Door PVC Cabinet Mirror of size 350 mm x 450 mm with internal shelves complete all as specified and directed.

S&F in repair, stainless steel Towel Ring Round complete all as specified and directed.

S&F in repair, stainless steel Towel Rack 600 mm long with lower hangers complete all as specified and directed.

S&F in repair, Europian WC, Single Piece, Vitreous China with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories, Size: 360 mm x 655 mm x 765 mm, P Trap-180 mm complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12 mm thick plain/designer Gypsum Board False Ceiling with GI Frame work including all necessary drilling, cutting to fix electric items complete all as specified and directed with following :- (i) GI Grid Channel 30 mm x 25 mm x 20 mm of guage fixed with rawl plug & screw 450 mm centre to centre along with perimeter walls. (ii) GI Channel made to shape 50 mm x 40 mm x 40 mm of 24 guage placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (iii) GI Intermediate runners of size 45 mm x 10 mm x 10 mm of 24 guage fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (iv) GI sheet 25 mm wide & 20 mm guage suspended fixed with steel fastners to roof ceiling @ 1200 mm centre to centre including pluging of RCC Slab. (v) 12 mm thick gypsum board filling joints with POP & finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

S&F G.I powder coated snap grid frame work for false ceiling with angle 25 mm x 25 mm x 1.5 mm fixed to perimeter wall, main 'T' runner 38 mm x 25 mm x 1.5 mm & secondary/cross 'T' runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia G.I hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of G.I. flat 40 mm x 3 mm, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long & 4 mm thick Non asbestos fibre board (E-board or V-board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified and directed.

Taking down rain water pipe of any size or pattern including all fittings complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair, 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair, 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair, stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed.

S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed.

Schedule of credit amount of Rs. 88,036.00 to be deducted during AOC.

J.P ENTERPRISES

M/S RAJ BUILDERS