CONSTRUCTION OF RCC CONCRETE SECURITY BOUNDARY WALL AT AFS BORGAD.

Amount

Demolition of brick or stone boulders masonry built in cement or cement lime mortar complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard rock complete all as specified and directed.

Material and labour for cement concrete in foundations,type D2 in CM 1:4:8 using (40mm graded stone aggregate) filling and mass-concrete complete all as specified and directed.

Material and labour for use and waste of formwork for rough finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface of concrete complete all as specified and directed .

Material and labour for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions Rough finished surfaces of finished concrete complete all as specified and directed .

Material and labour for use and waste of formwork for fair finished to surfaces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to bettercomplete all as specified and directed .

Material and labour for Reinforcement cement concrete M-25 (Design Mix) for Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for Reinforcement cement concrete M-25 (Design Mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for Reinforcement cement concrete M-25 (Design Mix) in walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified complete all as specified and directed.

Material and labour for TMT bars 6 to 8mm dia bars , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces CM 1:6 complete all as specified and directed.

Material and labour for preparing plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed .

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping. water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed .

Supply and fixing mild steel framed work as in grills,gratings etc with ends of bar shouldered and/or riveted or welded or forged into spikes,framed guard bars,ladders,framed balusters etc and similar work conforming to Fe-290,grade E-165, complete all as specified and directed .

Supply and fixing mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed .

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed .

Supply and fixing hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for preparation of new steel surfaces over 10cm width or girth not otherwise described appling two coats of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed.

Supply and fixing galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Supply and fixing concertina coil 600 mm Dia/ 56 Loops/2.5 mm core wire with following specification . Coil Diameter: 600 mm, heavy Type of strip Galvanized (IS 1730) Strip. Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 200 GSM/Sqmm. Zinc Coating on wire: Minimum 275 GSM/Sqmm (IS 6745-1972 reaffirmed 2006). Tensile Strength of wire: 1400-1500 N/Sq.mm. Weight: 6-8 kg (+ 5%). Number of Loops: 56. Blade Length: 22 mm. Barb Profile: Medium Blade (MBBT). Distance Between Barb: 35 mm. Stretchable length: 10-12 mtrs, Type of clip: Hardened Steelin Galvanized steel complete all as speciified and directed.

Material and labour for Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ Thickness of concrete slab in 150 mm complete all as specified and directed.

Note : The amount against Schedule of Credit on Page No. 25 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

M/S PRAMOD SURESHCHANDRA AHER (BID ID -3334828)

sunway associates (BID ID -3326680)

Bidder Name

M/S PRAMOD SURESHCHANDRA AHER

sunway associates

M/s.TIRUPATI BUILDERS