Estimate for Necessary amentities/repair in Jalalabad Canal Sub Division, CC Amirkhas

Cement concrete 1:8:16 with stone ballast 20 mm gauge in foundation and plinth (CSR Item No. 10.7 b ii)

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth (CSR Item No. 11.7)

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. (CSR Item No. 10.27)

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level (CSR Item No. 11.8)

Reinforced cement cocrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in superstructure. (CSR Item No. 10.2)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (CSR Item No. 9.8)

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material (CSR Item No. 14.3)

Factory manufactured flush door fixed in position iron hinges etc. (excluding the cost of any fittings other than specified above but including the labour for fixing the same in position. (Code : II Revision IS - 2191 Part-I) 1973 (Commercial with elm or gurjen facing on both sides with laminated core and lipped edges. 25 mm thick) (CSR Item No. 17.27 a iv)

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm (CSR Item No. 17.23 (ii))

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (CSR Item No. 17.49 (B))

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR Item No. 14.127)

Colour washing (two or more coats) (CSR Item No. 16.5)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. (CSR Item No. 16.16)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR Item No. 16.17)

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. (CSR Item No. 13.13 (i))

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)working pressure 4kgf/sqm (CSR Item No. 13.74)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge (CSR Item No. 13.75)

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. (CSR Item No. 13.45)

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3 (CSR Item No. 13.51)

Providing and fixing in position Grating of approved make (to the approval of Engineer in charge)150 mm x 150 mm . For gully trap PVC Grating (P.T.M.T) (CSR Item No. 30.76 b)

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. (CSR Item No. 28.19)

SDR 11 CPVC pipes & fittings 20mm o/d (CSR Item No. 28.19 i(b))

CPVC SDR 11 Pipe & fitting 25mm o/d (CSR Item No. 28.19 ii(c ))

INTERNAL - EXPOSED ON WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. (CSR Item No. 28.20)

SDR 11 CPVC pipes & fittings 20mm o/d (CSR Item No. 28.20(b))

CPVC SDR 11 Pipe & fitting 25mm o/d (CSR Item No. 28.20(c ))

Providing and fixing PVC waste pipe Collapsiable 32mm complete in all respect. (CSR Item No. 30.20)

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. (CSR Item No. 30.15)

Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete. (CSR Item No. 30.23)

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (CSR Item No. 30.4)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut (CSR Item No. 30.72 b)

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (ii) Double Layer Tanks (CSR Item No. 30.97 A ii)

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect G.I. tank nipple 25mm i/d (CSR Item No. 30.98 c)

Providing and fixing in position automatic brass Ball Cock in tanks (A) Brass Ball Cock with rod and Plastic Ball of 25mm i/d (CSR Item No. 30.96 b(iii))

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (i) Size 450mmx300mm (CSR Item No. 30.31 (i))

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) (CSR Item No. 30.33)

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect (ii) C.P. brass Bib cock foam flow without flange (CSR Item No. 30.65 A )

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (CSR Item No. 30.66 )

PTMT 20mm concealed stop cock with flange (CSR Item No. 30.66(i))

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge ) with various fixtures complete in all respect. i) C.P. Brass extension piece, 25mm long to 50mm long (CSR Item No. 30.64 B)

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. (a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg) (CSR Item No. 30.79)

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A (CSR Item No. 30.74 (iii))

110mm o/d single socket SWR UPVC pipe lines laid complete (CSR Item No. 30.74 i(b))

90mm o/d single socket SWR UPVC pipe lines laid complete (CSR Item No. 30.74 ii(c ))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (CSR Item No. 30.81 (iii))

For 110mm o/d pipes (CSR Item No. 30.81 (iii)(B))

Elbow 90 Degree (All side socketed) (CSR Item No. 30.81 (iii) (B)v )

For 90mm o/d pipes (CSR Item No. 30.81 (iii)(C))

Elbow 90 degree (all side socket) (CSR Item No. 30.81 (iii)(C)(v))

Coupler (CSR Item No. 30.81(iii)C(viii))

Vent Cowls (CSR Item No. 30.81(III)C(vi))

SUPPLY AND ERECTION OF WIRING ACCESSORIES: (CSR Item No. 34.15)

6/10amp. Two Way Modular Switch (One Module) (CSR Item No. 34.15(xii))

16/20amp. Universal Modular Shuttered Socket (two Module) (CSR Item No. 34.15(xvi))

6/10amp. One Way Modular Switch (One Module) (CSR Item No. 34.15(xi))

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Same Qty. as CPVC Pipes (a) Size 75 mm x 75 mm (CSR Item No. 30.85 (a))

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. (CSR Item No. 29.60)

Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal (CSR Item No. 29.60(a))

Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineerin-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. (CSR Item No. 29.2)

Depth upto 1.5 m B.G.L (CSR Item No. 29.2(A))

All classes of soil except rocky (CSR Item No. 29.2(A)i)

Cement concrete 1:5:10 With stone aggregate 40mm gauge In septic tank (CSR Item No. 10.9 b ii)

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth (CSR Item No. 11.7)

12.5mm thick cement plaster 1:4 (CSR Item No. 15.9)

Cement rendering on plaster 1mm thick (CSR Item No. 15.48)

Cement Conc. 1: 2 :4 with stone ballast or shingle (CSR Item No. 10.13 a ii)

Reinforcement Cement Conc. M-20 mechanicaly batch mixed using batch type conc. Mixer as per IS : 1791 and Vibrated by needle Vibrated but excluding steel reinforcement centring and shuttering in foundation and plinth (CSR Item No. 10.15)

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 125mm o/d pipe (CSR Item No. 29.43 (b))

Constructing soak pit 1.20x1.20x1.6 m deep, 230mm thick 1:5 brick work honey comb with bricks of Ist Class filled with brickbats including S.W. drain pipe 100 mm Diametre and 1.20 m long complete as per standard design. (CSR Item No. 29.48 (B))

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (CSR Item No. 31.11)

Scraping Mud Plaster (CSR Item No. 8.31 d)

Plastering on underside of ceiling 10mm thick cement plaster 1:3 (CSR Item No. 15.43)

Unbranded Executive Table with both side pedestal unit Size 5 X 3 (Non Schedule Item)

Steel Almirah of size 19"x36"x78" (Non Schedule Item)

3 Seater Public Place Seating Chair of mild steel with arm and backrest without cushion or Bench (Non Schedule Item)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (CSR Item No. 6.6)

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter) (CSR Item No. 18.24 b)

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete (CSR Item No. 18.18)

12.5 mm thick cement plaster 1:4 (CSR Item No. 15.9)

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. (CSR Item No. 13.55)

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½"" deep for walls and CI 3"" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring light point (CSR Item No. 34.02(ii))

Wiring 6Amp. wall socket point (CSR Item No. 34.02(iv))

Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect. Water Cooler Full Steel Body 40/80 ltr Capacity without Stablizer (CSR Item No. 30.25 a)

Fully automatic with auto cut off RO+UV+UF potable Water Purification System 20l/hr (Non Schedule Item)

THE NAV NIRMAAN COOP L AND C SOCIETY LTD