Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹38.1 L+₹46,310 (1.23%)Rejected-Finance 143 ALLAHABADPUR GORAKHPUR | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | 273001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹42.5 L+₹4.9 L (12.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹43.2 L+₹5.5 L (14.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹48.5 L+₹10.9 L (28.8%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Gorakhpur
GE (AF) Gorakhpur
REPAIR MAINT OF EXTERNALWATER SUPPLY IN OP/NP AREA AND REPAIR TO SWIMMING POOL AND ALLIED WORKS AT AF STATION GORAKHPUR
2023_MES_606731_2
9063/E8
Open Tender
Civil Works
Item Rate
330 days
GE (AF) Gorakhpur
Class D Cat a ii
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Gorakhpur
₹80,000
Yes
29 Sept 2023
11 Aug 2023
28 Aug 2023
11 Aug 2023
26 Aug 2023
18 Aug 2023
14 Aug 2023 - 16 Aug 2023
Amount
Excavation in trenches not exceeding 1.5mtr wide & not exceeding 1.5 mtr deep for laying pipe lines etc & getting out in soft /loose soil including forming bottom surface to required level or slope complete all as specified and directed by Engineer-in-charge.
Returning , filling in trenches (Soft/Loose soil) in layers not exceeding 25 cm thick after laying of pipe including spreading, levelling & well ramming including watering as required all as specified and directed by Engineer-in-charge.
Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above from the starting point all as specified and directed by Engineer-in-charge.
Supply and laying(in repair) DI pipes K-7 of 150 mm dia with flanged joint of ISI marked complete .,Make- Electro steel casting Ltd,Jindal saw Ltd."
Supply and laying (in repair) DI pipes K-7 of 100 mm dia with flanged joint of ISI marked complete .,Make- Electro steel casting Ltd,Jindal saw Ltd."
Supply and laying (in repair) GI pipes of 80 mm dia with flanged joint of ISI marked complete .,Make- Electro steel casting Ltd,Jindal saw Ltd."
Supply and laying (in repair) MS pipes grade "A" of 250 mm bore with flanged joint including necessary fabrication of ISI marked complete .Make- Electro steel casting Ltd,Jindal saw Ltd."
Supply and laying (in repair) MS pipes grade "A"of 300 mm dia with flanged joint including necessary fabrication of ISI marked complete .,Make- Electro steel casting Ltd,Jindal saw Ltd."
S&F butterfly (in repair )gate valve of 300 mm size bore of ISI marked complete .Make -Jolotto /kirloskar/upadhya.
Supply and lay M S Pipes with flanged joints heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of size 150 MM including necessary fabrication if required of ISI marked complete.
Supply and lay (in repair) M S Pipes with flanged joints heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of size 100 MM including necessary fabrication if required of ISI marked complete.
supply and fixing (in repair) of cast iron foot valve of size 250 mm size all as specified and directed by Engineer-in-charge.
Supply and fixing (in repair) MS pipes bend of size 250 mm dia with flanged joint of ISI marked complete .,Make- Electro steel casting Ltd,Jindal saw Ltd."
Supply and fixing (in repair) MS pipes bend of size 300 mm dia with flanged joint of ISI marked complete .,Make- Electro steel casting Ltd,Jindal saw Ltd."
Supply, laying (in repair ) & testing XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volt grade of size 35 Sqmm 3.5 core.
Supplying,laying (in repair) and testing GI tube medium grade ISI marked with necessary GI fitting such as elbow, union, reducer, tees, bends etc and short length complete laid in trenches/fixed on walls/ laid under floors all as specified and directed by Engineer-in-charge for 20mm bore
All as above but 25 mm bore
All as above but 40 mm bore
All as above but 50 mm bore
S & F in replacement of new cast iron sluice valve with flanged end with stainless steel spindle and Cl wheel class PN 1.6 inc rubber gasket nuts bolts and washer for following size ISI marked conforming to IS 14848 (2000),150 mm bore complete all as specified and directed including necessary excavation or removing of sludge , water from pit. Make: BIR/UPADHAY/LEADER
All as above but 100 mm bore
All as above but 80 mm bore
Cutting of road/hard standing for laying/dismentling of pipe line and making good disturbed surface and matching with the existing surface with cement concrete 1:2:4 not less than 75 mm in thickness on compacted sub base after laying of pipe line, complete all as specified and directed.
Supply & fixing( in repair) gun metal gate valve with iron wheel head screwed both side for GI pipe 20mm bore sizes Make: Leader/Zoloto/Kirloskar
All as above but 25mm bore
All as above but 40mm bore
All as above but 50mm bore
M&L for repairing cast iron sluice valve flanged type of any make by dismantling the valve replacing the bolts nuts, washers, check nut, gaskets, spindle stainless steel suitable for 80 mm sluice valve wedgenut hand wheel set screw etc and reassembling and refixing the same in position including repairing the worn out gland packing and testing conplete all as specified and directed for Sluice valve 80mm bore
All as above but Sluice valve 100 mm
All as above but Sluice valve 150mm
Material & Labour & testing in replacement with 3 mm thick rubber gasket (packing ring) including provision of suitable size bolts, nuts,flanged joint and double washers complete for 200 mm dia all as specified and directed by the Engineer-in-charge:
All as above but 150 mm dia
All as above but 100 mm dia
All as above but 80 mm dia
Detection of leakage in lead joints in 200 mm bore CI pipe line and taking out lead joints by burning /melting incl supplying and refilling the lead points caulking incl excavation & earth work, complete all as specified and directed. (Note: old lead shall be reused again)
All as per above but 150 mm bore, complete all as specified and directed.
All as per above but 100 mm bore, complete all as specified and directed.
All as per item above but 80 mm bore, complete all as specified and directed.
Detection of leakage in GI pipe joints of 50 mm bore of Gl pipe and taking out unserviceable part like union tee elbow etc with provisioning of new medium grade fittings complete all as specified and directed.
All as per item above but 40 mm bore, complete all as specified and directed.
All as as per item above but 25 mm bore, complete all as specified and directed.
All as as per item above but 20 mm bore, complete all as specified and directed.
All as as per item above but 15 mm bore, complete all as specified and directed.
Cutting of existing Cast iron pipes of 150 mm bore in position for insertion of new tees, branches etc including jointing with fittings complete all as specified and directed by Engineer-in-charge.
Cutting of Cast iron pipes of 100 mm bore in position for insertion of new tees, branches etcincluding jointing with fittings complete all as specified and directed by Engineer-in-charge.
Cutting of Cast iron pipes of 80 mm bore in position for insertion of new tees, branches etc including jointing with fittings complete all as specified and directed by Engineer-in-charge.
Dismatling old U/S non return valve of size 150 mm and replacement with new 150mm dia non return valve Make:Kirkolasker /Upadhaya/BIR
Material & Laying for drilling, tapping cast iron water mains (in position) for branch connections of 20/25 mm bore GI Pipe, including saddle pieces and nuts & bolts complete all as specified and directed by Engineer-in-charge.
S&F (in repair ) Aquatex mud slurry sewage pump 2 HP capacity submersible type electrically operated single phase motor . Make -crompton/kirloskar or equivlent of /crompton/Aquatex/KSB
Supply and fixing (in repair) of MS rising pipe of size 150mm of lengh 6 meter at a height of 60 feet of overhead tank for pump house no -10 with proper making of structure with bamboo and iron plate( size 4 feet x 6 feet) .
Taking down existing unserviceable and supply ,installation ,testing and commissioning LT 415 volt 4 wire AC 50 HZ factory made out door type panel weather & vermin proof of 16 gauge thick MS black sheet spray painted two coats inside & outside with approved paint over a coat of primer ,floor mounted ,locking arrangement including suitable size brick duct in ground for cable two earth terminal suitable cable glands for all incoming and outgoing cable including grouting of panel 60 cm above ground level by providing 90 cm long angle 50x50x 6 mm welded on all the four corner embeded in PCC 1;2;4 USING 20 mm stone aggregate up to 30 cm necessary earth work complete all as specified and directed by Engr-in charge including the following accesssoriesusing lugs and glands for cable connection at Pump House all as specified and directed by EIC and providing of followings:- (a) Copper bus bar - 04 Nos 100 Amp ratings & 01 No 100AMP. (b)MCCB 63 Amp 4 pole 25 KA -01No(Make-L&T/Havells/Merlin Gerin) (Incoming) . (C) TPN 4 POLE isolator 40 -01No(Make-L&T/Havells/Merlin Gerin) (outgoing). (d) Digital Volt meter, 3 ph,96x96 sqmm size suitable for voltage range 0-500 V -01 No (Make :- Conzerv/L&T). (e) Digital Ammeter, 3 ph,96x96 sqmm size suitable for range 0-100Amp CTS ratio 100/5 Amp -01 set(Make :- Conzerv/L&T). (f) Indicator lamp LED type of (RYB) set of 03 Nos with toggle switch-01 set (Make - L&T,SCI). (g) S & F MCB SPN 32 Amp cap -02 (Make- Protec/Havells/MDS). (h) S&F in replacement star delta starter 3 phase 440V 28-42 amp rating fullyautomatic with enclosures. Model No CS96008 (MUG 30) of L&T or equivlent of Legrand/Philips/Havells
Surface dressing n.exc 30 cm deep including cutting of bushes, small tree, grass etc complete.
S&F in replacement star delta starter 3 phase 440V 26-42 amp rating fullyautomatic with enclosures. Model No CS96008 (MUG 30) of L&T or equivlent of Legrand/Philips/Havells
S&F( in repair )chlorination Dozing pump single phase electrically operated 230 volts , 50 HZ ,fuse 1 amp with plastic suction and delivery piping solution tank maxm output 4.0 LPH Make -Unichlor of model no- UC-11,Sl no-60365 or equivlent of Avon/
Supply and laying ( in repair) or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section in service connections
M&L Flusing of borewell with compressed air with air compressor completely till the removed of sand, mud from the bore and till the clear water arrived . Flushing will be done with interval of 2-4 hours to the satisfaction of Eng-in-charge
M & L for Ductile iron fitting (any type & any radius/angle) such as bend tee connecting pieces. Double branch (cross collar cap and any type of end reducer Y -janction etc complete for pipe upto 150/100/80 mm dia normal complete as specified and directed.
M&Labour for maintenance of swimming pool which shall include the following items as part of one job (i) De-sludging/ back washing of filteration plant shall be carried out twice a week as directed by Engr-in- Charge. ii) Regular de-sludging of swimming pool with suction sweeper daily as directed by Engr-in-Charge. (iii) De-scaling , de-silting, cleaning of filtered water delivery channel in swimming pool, cleaning of surface with descaling liquid. Taking out and refixing the existing pre-casted RCC slab from the channel for cleaning shall be part of job all as directed by he Engr-in- Charge. Note:- (i) Daily cleanliness of the swimming pool area except area covered in items No 1 and quality of water shall be maintained as per standard norms of swimming pool and stringent measures laid down (ii) All saferty equipment required for handling of chloronome plant, chlorine gas, chlorine gas container shall be the responsibility of contractor and staff deployed by the contractor shall be fully trained for handling of the chlorine equipments chlorine containers installed at the swimming pool. It shall be contractor responsibility to provide necessary preventive equipments/ T&P to the deployed persons. (iii) Chemicals required for dozing, daily maintenance and disinfection of swimming pools shall be issued under sch 'B' free for consumption in the work only. (iv) Adequate manpower shall clean the swimming pool through existing suction sweepers daily morning and evening as directed. Daily record of cleaning shall be maintained faling which penal recovery of Rs 300/- for morning and Rs 300/- for evening suction cleaning shall be made from the contractor. (v) Maintenance as above for a week shall be measured and paid as one job
M&L Cutting out the existing winding of 3HP motor, opening of winding and re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified
S&F in repairs DOL starter for three phase motor, 440 V upto 3 HP Motor as in replacement , complete all as specified and as directed by Engineer- in- Charge.
Repair/ maint of suction sweeper machine including replacement of suction sweeper nylon brush of size 32 inch length and 4 inch width of superior quality replacement of wheel, nuts and bolts etc including all defective parts all as specified and directed by Engr-in-Charge
M&L Cleaning inside balance tank including removing deposit sand from inside the tank scrubbing and washing side walls and bottom with bleaching powder solution and making surface free from any fungus deposits strains using wire brush filling of cavaties inside of tank with cm 1:1 with quick cement and applying one coat of white wash inside and writing date of cleaning complete all as specified and directed Note :-1. All type of T&P and Labour etc shall be arranged by the contractor and rate for the same will be deemed to be included in the quoted rate. 2. Contractor will dispose off the material taken out from the Tank at a distance upto 50 Mtr as directed by Engieneer-in-Charge.
M&L Cleaning of diving pool of size 13m x 13.5m x 4.5m with wire brush and cleaning material such as Acid, wiper, PVC pipe etc with requred number of man power as required at site all as specified and directed by Engr-in-Charge
M&L Cleaning of main pool of size 13m x 13.5m x 2m with wire brush and cleaning material such as Acid, wiper, PVC pipe etc with required numbers of man power as required at site all as specified and directed by Engr-in-Charge
M&L Painting of filtration tank with two coat of aluminium paint as per existing colour after cleaning and removing existing dust and dirt on existing painted surfaces complete all as specified and as directed by Engineer-in-Charge. Note:- The rate for scafolding etc deemed to be included in the quoted rates.
S&F water testing Kit with all accessories, samples in tubes from 0.1 ppm to 5 ppm from reputed manufacturer complete all as specified.
S&F Ortho Tollidine solution for water testing, in 500 ml bottles complete all as speicified.
S&F in repairs PH testing Kit with all accessories for swimming pool water from reputed manufacturer complete all as specified.
Collection of water sample from the ETP of Aakash Vihar area(one sample of Raw sewage and one sample of treated water) and STP of Vijay Vihar area(one sample of raw sewage and one sample of treated water),in total four samples and testing of the same from the UP Pollution conrol board or any other Govt. recognized lab and submission of report to the department complete all as specified and directed.)
S&F in repairs PVC Hose pipe 50mm dia
S&F in repairs Nylon rope 25mm dia suitable for suction sweeper
S&F Alum crystal (Grade-I) for swimming pool
M&L Overhauling, Oiling, Greasing and servicing of Air blower of any capacity by Opening of all parts , suction air filter ,bush ,bearing , rotor ,drum , bearing of motor shaft ,Neck ring, coupling with studs between motor & air blower ,& all other parts and re-assemble the same after greasing , oiling all as directed by EIC. ( Note : - ( i ) Parts renewed shall be measured and paid separately under appropriate items ) (ii) Overhauling and servicing of Air blower should be carried out by Auth company or dealer Which is specialist of above .)
Material and Labour for taking out /dismantling of Air blower pump set of rating 3 phase 440 Volts supply of capacity upto 7.5 HP from ETP plant at any location and shifting the same to contractor's workshop for repair and re-installation/refixing the same at its original site and testing complete all as specified and directed by EIC .
M&L Cutting out the existing winding of the motor of capacity upto 7.5 HP, opening of winding, re-winding of motor with same size of rewinding with super enamelled copper winding including tapping, varnishing, baking and furnishing with the insulating sleeve and making connection complete all as specified and directed.
Repairing of pump by re-threading of worn out studs holes and supply and fixing over size studs with nut and washer complete all as specified and dierected.
M&L Repairing of pump shaft by depositing metal on it by breazing, grinding and polishing to appropriate size of the shaft complete all as specified and directed.
Supply and fixing in repairs gun metal bush of pump shaft complete all as specified and directed.
Supply and fixing in repairs driven end bearing of blower shaft complete all as specified and directed.
Supply and fixing in repairs end bearing of blower shaft complete all as specified and directed.
Supply and fixing in repairs gland and packing complete all as specified and directed.
Supply and fixing in repairs coupling with studs between motor & air blower complete all as speicifed and directed.
Supply and fixing in replacement suction air filter complete all as specified and directed.
Supply and fixing in replacement of suction silencer complete all as specified and directed.
Supply and fixing in repairs Neck ring complete all as specified and directed.
Supply and fixing in repairs bearing of motor shaft complete all as specified and directed.
Material and Labour for taking out /dismantling of Air blower pump set of rating 3 phase 440 Volts supply of capacity upto 7.5 HP from ETP plant at any location and shifting the same to contractor's workshop for repair and re-installation/refixing the same at its original site and testing complete all as specified and directed by EIC .
M&L Cutting out the existing winding of the motor upto capacity of 7.5HP, opening of winding, re-winding of motor with same size of rewinding with super enamelled copper winding including tapping, varnishing, baking and furnishing with the insulating sleeve and making connection complete all as specified and directed.
Material and Labour for taking out /dismantling of Air blower pump set of rating 3 phase 440 Volts supply of capacity upto 5.0 HP from ETP plant at any location and shifting the same to contractor's workshop for repair and re-installation/refixing the same at its original site and testing complete all as specified and directed by EIC .
M&L Cutting out the existing winding of the motor of capacity upto 5 HP, opening of winding, re-winding of motor with same size of rewinding with super enamelled copper winding including tapping, varnishing, baking and furnishing with the insulating sleeve and making connection complete all as specified and directed.
M & L for taking out unserviceable non clog submersible type raw effluent sewage lifting Submersible pump set of capacity upto 10 HP of rating 3 phase 440 Volts, from raw sewage collection sump/well of ETP plant well upto 18 mtr depth ,for cleaning of muds , overhauling, Oiling,Greasing and servicing by Opening of all parts , bush ,bearing , rotor ,drum , bearing of motor shaft ,Neck ring, coupling with studs between motor & all other parts and re-assemble the same after greasing , oiling of and shifting the same to authorised workshop for repair , testing and re-installation/Re-fixing/lowering in the sewage sump complete all as specified all as directed by EIC. ( Note : - ( i ) Parts renewed shall be measured and paid separately under appropriate items ) (ii) Overhauling and servicing of non clog submersible Pump should be carried out by Auth company or dealer Which is specialist of above
Attend the day to day complaint of non functing part to Air Blower , Air Blower Motor ,non clog submersible Pump, motor of any size ,type ,capacity and all connected parts . ( Note : - ( i ) Parts renewed shall be measured and paid separately under appropriate items ) (ii) Complaint Should be attend immediately within two hrs & Rectified the same day at the earliest without effecting of service .
Attend the day to day sewage complaint related leakege , choke , replacement of any part , with cutting ,jointing and any other work of GI Pipe ,MS Pipe , PVC Pipe for any size ,type ,capacity and any location rectified the same all as directed by EIC. ( Note : - ( i ) Parts renewed shall be measured and paid separately under appropriate items ) (ii) Complaint Should be attend immediately within two hrs & Rectified the same day at the earliest without effecting of service .
Material and labour for taking out the silt & foreign object , Cleaning & Removing sludge from course bar screen including all chamber of equilasation tank upto depth of 15 Mtr any capacity from ETP as per direction by EIC .
Material and labour for taking out the silt & foreign object ,Cleaning & Removing sludge from Fine bar screen ,Oil & Grease Chamber with water pressure, bleaching powder etc complete with all as specified & direction by EIC .
Material and labour for taking out the silt & foreign object ,Cleaning & Removing sludge from MBBR I & II Chamber with water pressure, bleaching powder etc complete with all as specified & direction by EIC .
Material and labour for taking out the silt & foreign object ,Cleaning & Removing sludge from Tube Setteler Chamber with water pressure, bleaching powder etc complete with all as specified & direction by EIC .
Supply and fix in repair Pac media in tube settler tank as per existing specified size
Replacement of sand filter media of sludge drying bed as per specification laid specification of IS , as per direction by EIC .
M & L for painting of old M S pipe/angles of any description in any width or girth for complete one STP and applying two coats of epoxy paint with one coat of primer all as specified and directed by EIC
Supply and fix in repair of pressure gauge o to 7 Kg/cm2 .
Material and Labour for taking out unserviceable/burnt raw non clog submersible type raw effluent sewage lifting Submersible pump set of capacity upto 10 HP of rating 3 phase 440 Volts supply from raw sewage collection sump of ETP plant at any location and shifting the same to authorised workshop for repair and re-installation/Re-fixing/lowering in the sewage sump complete all as specified and directed. (Parts renewed shall be measured and paid separately under appropriate items) listed here below :-(a) Cutting out the existing winding of stator of submersible motor of any make and rewinding with water proof copper winding wire of appropriate guage as existing all as specified and directed. Make as per original manufacturer of equipment..
(b) Straightening of the slots of stator of submersible motor of any make.
(c) Supply and fixing thrust bearing block complete of submersible pump of any make.
(d) Supply and fixing gun metal bushes for submersible motor as per manufacturer's design and specification.
(e) Supply and fixing sand guard of submersible motor.
(f) Supply and fixing of bronze metal impellars
(g) Supply and fixing of shaft sleeve
(h) Supply and fixing of set of gasket and O-ring
(j) Supply and fixing of Mechanical seal motor end.
(k) Supply and fixing of Mechanical seal pump end
(l) Supply and fixing deep groove ball bearing motor side
(m) Supply and fixing groove ball bearing pump side
(n) Supply and fixing pump casing
(o) Supply and fixing of intermediate casing
(p) Supply and fixing of bearing housing
(q) Supply and fixing of bearing cover
(r) Supply and fixing of shaft protection sleeve
(s) Supply and fixing of bowl, cast iron
(t) Supply and fixing of bearing sleeve complete
(u) Supply and fixing of rotor
(v) Supply and fixing of cable assembly
M/L for taking out and changing filter media and strainer of filter plant at swimming pool
Supply and fix in repairs Plastic Media MBBR (Media) as per existing size & specification of IS and direction by EIC .
Supply & filling in repairs of new Gear Oil Grade G-90 for Air Blower as specified and directed .
Supply and fixing in repairs air blower pulley as per sample complete all as specified and directed.
Sanjai sales and services
M/S SHAILZA TRADERS
M/S NATIONAL ELECTRIC WORKS
m/s allied enterprises
M/s Comfort Air Conditioning and Refrigeration Engineers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .