Construction of Central Prison, 113 Nos. of Prison Staff quarters, Cement Concrete Road and Security Perimeter wall (For Men Prison) at THERKKUTHERU UTKADAI SEMBUR VILLAGE, Melur Taluk in Madurai District (Phase-I)

Amount

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

b) 2 to 3 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0001) Supplying and filling in foundation and basement with filling crushed stone sand

F0002) Providing Sand Gravel mix for foundation and basement in layers of 150mm thickness

EQ0041.a) Granular Sub base with Graded material (Table: 400-1) - Plant Mix method)

F0045) Wet mix Macadam (Table 400-13) including premixing the Material with water at OMC in mechanical mix plant carriage of mixed

F0022) Providing WBM 125mm consolidated thick with gravel blindage

F0025) Surface dressing over WBM 25mm thick with pre-coated chips using 11.2 mm size IRC

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0013) Supply and filling in foundation and basement with gravel

C0027) Plain cement concrete 1:5:10 for foundation and basement using 40mm gauge hard broken stone jelly

C0029) Plain cement concrete 1:2:4 for foundation and basement and other similar works using 20mm gauge HBSJ with Admixture

C0030) Plain Cement Concrete 1:8:16 for foundation and other similar works using 20mm Gauge broken brick jelly

C0033) Plain cement concrete 1:4:8 for foundation using 40mm gauge HBSJ

CS0006) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M25 I. 20mm thick a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

e) In Fourth Floor

f) In Fifth Floor

CS0007) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M25 II. 40mm thick a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

f) In Fourth Floor

g) In Fifth Floor

C0050) Precast cement concrete Jally ventilator using standardised concrete mix M25 without vibrating charges 50mm thick a) In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

e) In Fourth Floor

f) In Fifth Floor

C0040) Providing and laying in position, Standardised Concrete Mix M-25 Grade a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

f) In Fourth Floor

g) In Fifth Floor

h) In Sixth Floor

C0056) Supplying and fixing Monolithic RCC door frames using standardised Concrete mix M25 Suitable Door of Sizes a) 750 x 2100 mm

C0014) Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth and filling with stone jelly of 40mm size including earth work excavation 1m dia, 600mm depth and filling with filling sand to a depth of 300mm filling sand over the stone jelly and covered with Precasted slab Standardised Cement concrete M25 a) Providing Pit

b) Augering 30cm dia

CS0039) Supplying and Fixing of fibre mixed precast slab of 50mm thick of all required shapes made in C.C 1:3:6

B0051) Brick partition wall in Cement Mortor 1:4 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) with admixture a) In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

e) In Fourth Floor

f) In Fifth Floor

B0016) Brick Work in Cement Mortor 1:5 using fly ash bricks of size (23x11x7cm) with Admixture in foundation and basement

B0027) Brick Work in Cement Mortor 1:6 using fly ash bricks of size (23x11x7cm) with admixture a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

e) In Fourth Floor

f) In Fifth Floor

g) In Sixth Floor

B0054) Brick Partition wall in Cement Mortor 1:4 110mm thick for super structure using fly ash bricks of size (23x11x7cm) with Admixture a) In Foundation and basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

f) In Fourth Floor

g) In Fifth Floor

h) In Sixth Floor

B0062) Brick partition walls in cement mortar 1:4 70mm thick using fly ash bricks of size 23x11x7cm with admixture a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

e) In Fourth Floor

f) In Fifth Floor

FL0003) Supplying and fixing of 20mm thick bituminous expansion joint filler pad

FL0108) Flooring with a bed of cement concrete 1:5:10 using 40mm size hard broken stone jelly

FL0109) Plastering the top of flooring in Cement mortar 1:4, 20mm thick with admixture

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound

FL0049) Supplying and fixing of colour glazed tiles over cement plastering in Cement mortar 1:2, 10mm thick with Admixture

FL0110) Supplying and laying of Ceramic tiles (anti skid) over Cement mortar 1:3, 20mm thick with Admixture

FL0123) Providing double nosing to the edges of granite slab of 18mm to 20mm thick including labour,

FL0118) Supplying and fixing of Stain free Nano polish Vetrified tiles of best approved quality 600x600x8mm for flooring and other similar works with Admixture

FL0117) Supplying and fixing of Vetrified tiles of best approved quality (Ivory) 600x600x8mm for flooring and other similar works with Admixture

FL0028) Supply and laying superior variety concrete designer tiles for flooring in CM 1:3, 20mm thick with Admixture

FL0060) Supplying and laying of polished Rajasthan Kotta stone slab, 20mm thick of approved qualty for flooring in CM 1:3 20mm thick

FL0137) Supplying and fixing of PVC Trims (Beeding) including charges for fixing in position without damaging the existing structure etc

F0046) Prime coat providing and applying primer coat with bitumen emulsion (SS-1 type) on prepared surface of granular base

F0047) Providing and applying tack coat with bitumen emulsion (RS-1 type) using emulsion pressure distributor

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

i) 3.31 mt to 4.30 mt

ii) 4.31 mt to 5.30 mt

iii) 5.31 mt to 6.30 mt

iv) 6.31 mt to 7.30 mt

v) 7.31 mt to 8.30 mt

FW0012) Providing additional Strutting to centering of R.C.C slab of all surfaces

PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture

PL0006) Plastering with Cement mortar 1:4, 12mm thick with Admixture

PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture

PL0012) Plastering the Top of flooring in C.M 1:3, 12 mm thick mixed with WPC

PL0015) Plastering for border in CM 1:5, 12mm tk a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PL0017) Stucco Plastering 12mm thick using chips 3-10mm thick

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0032) Supplying and applying of wall putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0037A) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PA0027) Providing wooden (Melamen Door) Polish for new wood by removing by blade scrapping the exisiting dirt from the wooden surface

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0017) Supplying and fixing of 4mm thick pin headed Glass panels

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame with shutter

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilator type for all sizes

JW0045) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Window of casement type (open) for all sizes

JW0044) Supplying and Fixing in position of UPVC Sliding window Two Track

JD0027) Supplying and fixing of Best Indian T.W. single leaf door shutters using 9mm thick phenol bonded BWR grade plywood shutters with brass screws Suitable for door of size a) 750mm x 2100mm

JD0028) Supplying and fixing of Best Indian T.W. single leaf door shutters using 9mm thick phenol bonded BWR grade plywood shutters with brass screws Suitable for door of size a) 900 x 2400 mm

JW0001) Supplying and fixing of TW single leaf glazed window shutter a) Window 135 cm height

b) Window 105 cm height

JV0001) Supplying and fixing of Teak wood swing type glazed ventilator a) Ventilator 90 x 60 cm

JD0003) Supplying and fixing of Single leaf Teakwood Panelled door shutters with brass fittings Suitable for Door of size a) 900 x 2100 mm

JD0004) Supplying and fixing of Single leaf Teakwood Panelled door shutters with brass fittings Suitable for Door of size a) 1000 x 2100 mm

JD0005) Supplying and fixing of Single leaf Teakwood Panelled door shutters with brass fittings Suitable for Door of size a) 1200 x 2100 mm

JD0006) Supplying and fixing of Single leaf Teakwood Panelled door shutters with brass fittings Suitable for Door of size a) 1200 x 2400 mm

JD0007) Supplying and fixing of Double leaves Teakwood Panelled door shutters with brass fittings Suitable for Door of size a) 1500 x 2400 mm

JD0008) Supplying and fixing of Double leaves Teakwood Panelled door shutters with brass fittings Suitable for Door of size a) 2000 x 2400 mm

JD0050) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size a) 900 x 2100 mm

JW0030) Manufacturing and supplying of steel windows (Weight basis)

GR0001) Supplying and fixing Mild Steel grills as per the design approved

GR0056) Manufactuing, Supplying & fixing of Stainless steel Hand Rails for Staircase using 50mm dia (304 L Grade) Stainless steel pipe

GR0057) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless steel pipes

GR0072) Supplying and Erecting Pull and Push Type Rolling Shutter Gear Operated Type (from 8 sqm. to 12 sqm. Area)

JD0086) Supplying and fixing of Steel doors with MS flat of size 50mmx10mm alround and the panel shall be provided with 20mmx20mm MS square bar etc., a) 1000 x 2100mm (Lockup Door)

GR0059) Supplying, fabrication and fixing in position of mild steel angle truss including cost of materials and labour charges

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

FL0122) Supplying and fixing of Granite slab of size 4' x 2' 18-20mm tk (Jet Black) for Kitchen hearth slab in CM 1:3, 12mm tk with admixture using crushed stone sand a) In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

e) In Fourth Floor

JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood including two coat enamel paint and one coat primer

WS0220) Supplying and fixing of Precast kerb stone of 450x300x150mm made in CC 1:3:6 using 20mm size HBSJ

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0004) Supply and errection of following capacity of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use a) 700 litres

b) 1000 litres

MS0053) Supplying and fixing of C.I man hole cover (Heavy duty) of approved quality and brand of size 0.60mx0.60m (50 Kg)

SA0111) Supply, delivery and fixing of cuddappah slab sink of size 600mm x 600mm x 200mm thick

WS0007) Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

c) 20mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0013) Supplying and fixing of approved brand Porcelain Flat Back urinal long size

SA0039) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings

SA0045) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum water seal of 50mm

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

SA0113) Supply and fixing of 10 litre capacity Handle type PVC low level flushing tank

SA0019) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm In Ground floor.

SA0020) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580mmx440mm (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap

SA0024) Supplying and fixing EWC superior variety (colour) 500mm with 'P' or 'S' trap

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

SA0052) Supplying and fixing of following dia PVC Bend a) 110mm dia PVC Bend

b) 160mm dia PVC Bend

SA0053) Supplying and fixing of following dia PVC Equal tee a) 110mm dia PVC Equal Tee

b) 160mm dia PVC Equal Tee

SA0155) Supplying and fixing of CP Two Way Bib Cock with Health Faucet approved quality with ISI mark

SA0114) Supply, delivery and fixing of Stainless steel (304L Grade) sink of size 600mm x 600mm x 200mm thick

MS0002) Supplying and fixing of 20mm dia Aluminium Hanger Rod to the required length

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

EL0001) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type wall socket with switch

EL0252) Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 (Type-I) using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

EL0085) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI quality

EL0084) Supplying and fixing of 300 mm dia sweep AC exhaust fan

EL0070) Supplying and fixing of 9 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0072) Supplying and fixing of 12 Watts LED Bulb for Bulk head fittings

EL0163) Supply and fixing of 32 Amps triple pole main switch with fuse and neutral link

EL0186) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0202) Supply and Run off main with 4 wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0203) Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0235) Supplying and fixing of 1 No. of 450x375x20mm thick TW plank varnished with 3 Nos of 32 amps 500 volts grade porcelin fuse unit

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

WS0017) Supplying and delivery of following dia GI Pipe a) 40mm dia GI Pipe

EL0174) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level

EL0221) Supplying and fixing 1 No. of 30 Amps 500 volts grade porcelain fuse unit

EL0222) Supplying and fixing 3 Nos. of 32 Amps 500 volts grade porcelain fuse unit

EL0241) Supplying and fixing best country wood meter cupboard

EL0339) Supply and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good a) 3.5 core 120 Sqmm PVC aluminium armoured LTUG cable

EL0299) Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4pole MCB isolater as incoming and 12 Nos. 6A to 32A SPMCB as outgoing inflush with wall and making good of the concealed portion with earth connection

EL0312) Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only.

EL0557.a) Supplying and fixing of Single Pole MCB 6A to 32A, 10KA

EL0163.a) Supply and fixing of 100 Amps triple pole main switch with fuse and neutral link

EL0554.a) Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

EL0229) Supplying and fixing 3 Nos. of 100 amps 500 volts grade porcelain Fuse unit

NL0001) Supplying Fabrication and Erection in position of M.S. scheme name and layout board

GR0053) Supplying and fixing in position of colour Galvalume sheet of 0.47mm thick inclusive of overlap length

LF0001) Design, Supply, Delivery, Installation, Testing and Commissioning of Passenger Lift (Brand:Johnson / Kone / OTIS or equivalent) of 13 Persons capacity with 3 Floors / 4 Stops / Stainless Steel (1.5mm) Car Cabin with M/C room, Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD. (G+3)

LF0001.a) Design, Supply, Delivery, Installation, Testing and Commissioning of Passenger Lift (Brand:Johnson / Kone / OTIS or equivalent) 13 Persons capacity with 5 Floors / 6 Stops / Stainless Steel (1.5mm) Car Cabin Passenger Lift with M/C room Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD. (G+5)

LF0001.b) Design, Supply, Delivery, Installation, Testing and Commissioning of Stretcher-cum-Passenger Lift 15 persons capacity with M/C room, Speed 1 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD

E0015) Breaking, removing and stacking for pre measurements of hard rock requiring blasting by the way of silent blasting using approved rock disintegrating chemicals/rock splitting materials by drilling holes to appropriate depth of not more than 1.5m with required spacing

MS0089) Supplying, installing, testing and commissioning of Pulsating arrangement Power fencing with Energizer System

DI0079) Clearing the scrub jungle available in the site and removing the same and disposing

MS0090) Providing and applying weather proof sealant on outer joints

FF0001) Main electrical driven pump: Supplying and fixing of electrical motor driven main pump of horizontal centrifugal end suction back pull out type The pump shall be coupled to TEFC motor of suitable 100HP with speed of 2900 RPM and 2280Lpm. complete set shall mounted on common base frame Make: KIRLOSKAR

FF0002) Main diesel driven pump: Supply, erection, testing and commissioning of fire fighting application horizontal centrifugal type pump rated for 2280 LPM at 70 metres head with 110HP electric start, water cooled, Radiator type Diesel Engine pump including exhaust pipe line, battery, fuel tank etc., with base plate and accessories etc., MAKE: KIRLOSKAR

FF0003) Jockey pump: Supply, erection, testing and commissioning of Head Pressurization Pump with 15HP electrical motor of Kirloskar make with suitable base frame including necessary vibration bed mounting etc., Make: KIRLOSKAR

FF0004) Control Panel for Fire pumps: Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel, of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, Powder coated of approved shade etc.,

FF0005) 1100 Grade Power / Control Cables: Supplying, laying, testing & commisioning of FRLS PVC outer sheath, steel aromoured, aluminium / copper conductor 1100V grade power cables with glands etc., a) 4 core x 6 sqmm XLPE for Jockey Pump

b) 8 core x 1.5 sqmm for Diesel Engine Pump

c) 3 core x 1.5 Sqmm for Pressure switch

FF0006) Supply, erection, testing and commissioning of MS 'B' class heavy duty pipe as per IS 1239 to with stand a developing pressure of 10 Kg/Sqm including necessary fittings including one coat metal primer and two P.O Red painting etc., MS Pipes: Make: JINDAL Grade: Heavy B" Class IS 1239 a) 200 mm nominal dia

b) 150 mm nominal dia

c) 100 mm nominal dia

d) 50 mm nominal dia

e) 25 mm nominal dia

FF0007) Pipe Support (Header line) : Supplying and fixing of Required MS L angles, MS C Channels, U Clamps with nut bolts, Fisher bolts, paints a) 200 mm nominal dia

b) 150 mm nominal dia

c) 100 mm nominal dia

d) 50 mm nominal dia

e) 25 mm nominal dia

FF0008) MS Short Bend: Supplying and fixing of MS Bend a) 150mm nominal dia

b) 100mm nominal dia

c) 50mm nominal dia

FF0009) CI Butterfly valve: Supplying and fixing of CI Butterfly valves with required flanges, nuts, bolts etc., a) 150mm nominal dia

b) 100mm nominal dia

c) 50mm nominal dia

FF0010) C.I. Non-return valve: Supplying and fixing of C.I. Non-return valve (PN 16) as per IS:5312 swing check type with required flages, nuts, bolts and gaskets etc., a) 150mm nominal dia

b) 100mm nominal dia

FF0011) Ball valve: Supplying and fixing of Gun metal chrome finished with fittings of screwed end type a) 25mm dia (Priming Line & Air vessel Tank)

FF0012) Pressure Switch: Supply and installation of differential Pressure switches of suitable range (0 to 7 par) for pumpsets

FF0013) Pressure Gauge: Supply and installation of Pressure gauges of suitable range (0-14 par), 150mm diameter dial for pumpsets with necessary Ball valves, Siphon, fittings like unions / colors / reducers etc.,

FF0014) Air Release valve: Supply, erection, testing and commissioning of Air release valve type: Self operative Test pressure : 16 Kg/cm2 a) 25mm nominal dia

FF0015) Foot valve: Supplying and fixing of foot valve (If it is negative suction) Type: Ball type required nut bolts a) 150mm nominal dia

b) 100mm nominal dia

FF0016) Y-Strainer: Supplying and fixing of Y-Strainer Body: Cast iron required gasket, nuts and bolts a) 150mm nominal dia

b) 100mm nominal dia

FF0017) Air Vessel Tank : Supply, fixing, testing and commissioning of Air vessel tank of size 200mm dia x 1000 mm long fabricated out of MS pipe, plate and structural stand etc.,

FF0018) Diesal Tank : Supply, fixing, testing and commissioning of Diesel tank 100 lts capacity and structural stand etc.,

FF0019) Hydrant system : Supply, erection, testing and commissioning of MS 'B' class heavy duty pipe as per IS 1239 to withstand developing pressure of 10 Kg/cm2 including necessary fittings including one coat metal primer and two coat P.O Red painting MS Pipes: Make: JINDAL / Grade: Heavy B" class IS 1239 a) 150mm nominal dia

b) 100mm nominal dia

c) 80mm nominal dia

d) 50mm nominal dia

FF0020) Pipe Support (Header line) : Supplying and fixing of pipe support Required MS L angles, MS C channels, U clamps with nut bolts, Fisher bolts, Paints etc., a) 150mm nominal dia

b) 100mm nominal dia

c) 80mm nominal dia

d) 50mm nominal dia

FF0021) MS short Bend: Supplying and fixing of MS Bend a) 150mm nominal dia

b) 100mm nominal dia

c) 80mm nominal dia

d) 50mm nominal dia

FF0022) Anti corrosive material : Coating of Primer and wrapping with 2mm thick polymer corrosion resistant tape as per IS:10221 with 15mm overlap a) 150mm nominal dia

b) 100mm nominal dia

FF0023) Supplying and fixing of Fire Fighting Application oblique type stainless steel Hydrant valve: Make: Kartar Grade: SS 304 IS:5290 63mm dia instantaneous outlet 80mm dia flanged inlet, blank cap, chain and hand wheel etc.,

FF0024) Supply of Fire Fighting application M.S. Hose cabinet stand: Type: Wall mounted double door with 4mm thick glass with rubber beading, single key

FF0025) Supply and fixing in position of Fire Fighting application of RRL Hose : Make: Kartar length:15 metre Test pressure: 21 Kg/cm2 Design standard: IS 636

FF0026) Supply and fixing in position of Fire fighting application Short branch pipe: SS 304 with Nozzle Material : Gunmetal/Stainless steel Hydrostatic pressure test: At 21 Par for 2.5 minutes

FF0027) Supply, installation of Fire Fighting application Hose Reel Drum: Make: Kartar length: 30 metre 180 Degree swing

FF0028) Supply and fixing of Joint hose for Hose reel drum: Pressure tube: 1.5 metres Pressure: 88 Par with both side threaded nipples etc.,

FF0029) Supply and fixing of CI Butterfly valve: Make: Kartar IS 13039 required flagnges, nuts, bolts etc., a) 200 mm nominal dia

b) 150 mm nominal dia

c) 100 mm nominal dia

d) 80 mm nominal dia

FF0030) Supply and fixing of Ball valve: Gun metal chrome finished with fittings of screwed end type etc.,

FF0031) Supply, erection, testing and commissioning of Pressure Gauge : Supply and installation of pressure gauges of suitable range (0-14 Par), 150mm dia meter dial for pumpsets with necessary Ball valves, Siphon, fittings like unions / colors / reducers etc.,

FF0032) Supply and fixing of Air Release valve: Type: Self operative Test pressure: 16 Kg/cm2 a) 25mm nominal dia

FF0033) Supply, erection, testing and commissioning of Fire fighting 4 way Fire Brigade inlet: Standard : IS 904 Test presure:21 Kg/cm2 Material: Body-Bronze (Gun metal) / Cast iron, Check valve - (Gun metal) stainless steel a) 4 way inlet

FF0034) Supply and fixing of stored pressure ABC (mono Ammonium Phosphate powder) Fire Extinguisher 6 Kg capacity

FF0035) Supply and delivery of Fire Extinguisher CO2 4.5 Kg

FF0036) Supply and kept in position of 9 lit capacity of 4 Fire Buckets with stand

FF0037) Supply, installation testing & Commissioning of 19mm nominal bore quartzoid bulb type sprinkler of Tyco/HD make, K factor 5.6, crome finish, suitable for operating at 68 degree C.

FF0038) Zone panel Supply, installation, testing and commissioning of conventional type C&l panel having capacity to connect zone panel with necessary indications, solid state circuitary with visual front and alarm display

FF0039) Hooters Supply, installation testing and commissioning of 12W electronic Hooters (Sounders) with accessories for sounding the alarm when activated

FF0040) Manual call point Supply, installation, testing and commissioning of Manual call points of break glass type with hammer and chain

FF0041) Conventional Smoke Detector Supply, installation, testing and commissioning of Manual call points of break glass type with hammer and chain

FF0042) Cable Supply and laying of 2 core x 1.50 Sqmm shielded FRLS armoured cable including cost of materials and labour charges in all etc.,

CMK Projects Private Ltd., (BID ID -1387389)

GRM CONSTRUCTIONS (BID ID -1389616)