Addition Alteration to JCOs ORs Md Accn at LEXMITEK Area under GE (I) Belgaum

Amount

Demolition of cement concrete (unreinforced) in ground floors for levelling of and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing neat cement slurry with 3 kg of cement per Sqm complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4, type Bo, using 12.50mm graded stone aggregate as in sub base for flooring finished fair and even complete all as specified and as directed.

M&L for screed bed or bedding layer in cement mortar 1:6 , 15mm thick for laying floor finishes complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles (square/rectangular) 7 to 8 mm thick in floors/ skirting etc , area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:4 including taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified.

M&L for coloured Glazed ceramic tiles in verticle surfaces 300mmx200mmx7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/ Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for 20 mm thick screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 20-25 mm thick laid with grey cement slurry jointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar with grey cement slurry , jointed and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Granite slab (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing complete as specified and as directed.

M&L for preparation of RCC roof slab by removing dust, dirt & applying bitumen based primer at 0.2Kg per Sqm & providing 4mm thick APP modified water proofing membane weight not less than 4.5 Kg/Sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including minimum 10cm side/over lap/& including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2 Kg Per Sqm & on drying appply a coat of solar reflecting bituminous paint at 0.1Kg/Sqm. Including removal of existing treatment of any description & any thickness complete all as specified and as directed.

M&L for brushing with neat cement slurry @ 3Kg/Sqm. complete all as specified and as directed.

M&L for rendering 10mm thick on concrete surfaces in CM 1:3 over roof finishing surface even and smooth with out using extra cementbut mixed with water proofing compound (Water proofing compound shall be measured separately).all as specified and as directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Anodised alumium powder coated wndows/, ventilator shutters side hung type without sash bar, aluminium section weight 0.55 kg/m including necessary joining cleats, glazing clips, rubberpacking anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. complete all as specified and as directed.

S&F Anodised alumium powder coating wndows, ventilator shutters fixed type without sash bar, aluminium section weight 0.55 kg/m including necessary joining cleats, glazing clips, rubberpacking anodised aluminium snap beading, screws etc. complete all as specifie and as directed.

S&F Harrison rails aluminium anodized alloy curtain rail with fixing brackets stops, roller etc complete as directed by Engr-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete as specified and as directed.

Taking down chowkats or frames with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed

S&F second class hard wood plain, solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.by Engr-in charge.

S&F 2nd class hard wood factory made 35 mm thick plain, framed, panelled door shutter (any number of panels) with panels of 12 mm thick plywood commercial face grade BWR.complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood factory made glazed/ factory made gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats all as specified and as directed.

M&L for 25mm thick Block board, interior grade, grade 1 quality, decorative type on one face fixed with screw to timber frame work including external teak wood lipping 6mm thick around edges complete all as specified and as directed.

M&L for 2nd class hard wood timber plain filltes exc 13 sqcm n exc 25 sqcm rectangular or traingular in section clean sawn secured with nails. complete all as specified and as directed.

S&F Aluminium alloy wire cloth (mesh) 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.complete all as specified and as directed.

S&F 4mm thick plain sheet glass, ordinary quality and glazing in square exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing in square n exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F factory made PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S& F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Note :- The quoted rate shall be deemed to include for supply & fix builders hard ware as per manufacturer`s instructions.

S&F precast RCC Jalli 35 mm thick 1:2:4 type B 0 and set in CM 1:6 including moulding etc complete all as specified and as directed.

M&L for preparing new wooden surfaces over 10 cm width or girth and applying 2 coats of synthetic enamel painting over a coat of primer all as specified and as directed.

S&F 150 mm size, Aluminium anodised, cast type handle complete all as specified and as directed.

S&F 100 mm size, Aluminium anodised, cast type handle complete all as specified and as directed.

S&F MS butt hinges 100mm in size, medium weight, cold rolled all as specified and as directed.

S&F MS butt hinges 75mm in size, medium weight, cold rolled all as specified and as directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and as directed.

S&F 250mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section, 150mm long all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section, 75mm long all as specified and as directed.

S&F 150mm long floor door stopper of aluminium body and tongue, anodised, with cover plate and hard drawn steel spring, fixed in floor all as specified and as directed.

S&F brass 2 levers locks, cupboard grade 1 size 50mm all as specified and as directed.

Taking down cement plaster from brick or concrete or stone walls including racking out joints, hacking for key and scrubbing down with water etc., complete all as specified and as directed.

M&L for Rendering on concrete surfaces in cement mortar 1:3, 5m thick on ceiling finished even and smooth without using extra cement.complete all as specified and as directed.

M & L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 (5mm thick floating coat mixed with WPC over 10mm thick base) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with water proofing compound complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for three coats of white wash on ceilling including preparation of newly plastered or unplastered surfaces complete all as specified and as directed

M&L for complete removal of existing treatment on ceiling and applying three coats of white wash including preparation of surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a preparatory coat of 3mm thick wall care putty on wall including necessary preparation of surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a preparatory coat of 3mm thick wall care putty on wall including necessary preparation of surfaces all as specified and as directed.

M&L for Preparing new plastered surfaces applying two coats exterior emulsion paint over one coat of primer all as specified and as directed.

M&L for complete removal of existing treatment on old walls incuding preparation of surfaces and applying two coats of exterior emulsion paint over one coat of primer all as specified and as directed.

Taking up or down steel tubing & connections 15 mm dia.all as specified and as directed.

.-Ditto- all as per item No 56 above, but 20 mm dia tube

M&L for cutting chases , pinning in not exc. 10cm girth in Brick work and packing around in CM 1:3 for concealed water tubing etc., complete all as specified and as directed by the Engineer-in-charge.

S&F GI tubes medium grade with all fittings and fixed complete to walls and ceilings or laid in floor of 15 mm bore all as specified and as directed.

S&F tubes medium grade Galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm bore all as specified and as directed.

Supply and fix Gun metal, globe or gate valves for pipe of 20mm dia with iron wheel head ,screwed both ends for iron pipe.and all as specified and as directed

M&L for Plain cement concrete PCC 1:3:6 type C1, (using 20mm graded stone aggregate) 75mm thick in paving, plinth protection etc. and finished the surface even and fair,.Including bitumen mastic filling all as specified and as directed

M&L for providing precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) in apex stones boundry with plain fair faces including chamfers, weatherings, throating etc and set in CM 1:6 complete all as specified and as directed.

Extra for forming fair finished drain or channel n exc 30 cm inner girth in cement concrete using extra cement incl forms, moulds mitred/stopped end etc all as specified and as directed.

S&F in repairs vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern ) including P or S trap lime concrete bedding etc complete all as specified and as directed Make:- Cat No S3010103 of CERA or equivalent make as approved by GE

S&F in repair vitreous china wash basin white flat back size 580x450mm (excluding taps, waste chain, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand all as specified and as directed by Engr-in-Charge.

S&F in repairs, PVC valveless syphonic action type low level, flushing cistern 10Ltr capacity, white with inlet ball valve float and handle etc complete including brackets all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts 450mm long. complete all as specified and as directed

S&F in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle for 15mm dia pipe complete all as specified and as directed

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle,screwed down , screwed for iron pipe 15mm bore, and fixed. complete all as specified and as directed

S&F in repairs pillar taps, 15mm bore, cast copper alloy with capstain heads, chromium plated,screwed down high pressure,screwed for iron pipe and fixed all as specified and as directed.

S&F in repairs 3 way mixer tap for mixing hot & cold water fancy type brass chromium plated screwed down for 15mm bore GI pipe all as specified and as directed.

S&F in repairs Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, all as specified and as directed. Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039 or Equivalent as approved by GE

M&L for fixing Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs, all as specified and as directed. Make: Jaquar or equivalent model as approved by GE.

S&F brass, chromium plated toilet paper holder fixed to wall with chromium plated brass screws Cat No.AQN 7711 of Jaguar . or equvalent as approved by GE

S&F health faucet , brass chromium plated with 1m long flexible PVC tube and wall hook all as specified and as directed. Make: Cat No. 563 of JAQUAR or equivalent model as approved by GE.

S&F 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and as directed. Make: JAQUAR or equivalent model as approved by GE.

S&F tubular towel rail 20mm dia D type 600mm long between flanges brass chromium plated all as specified and as directed.

Supply and fix UPVC (SWR) floor trap 75mm dia outlet,plain with grating including jointing with solvent cement all as specified and as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 105gms) for WHB all as specified and as directed.

S&F of Brass Hat and coat hooks, solid body, 175mm to 250 mm as in repairs.all as specified and as directed.

S&F in repairs 1mm thick stainless steel plate rack, overall size not less than 600mm x 900mm x 250mm deep, fixed to wall with rawl plug and suitable size stainless steel screws all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overal size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix UPVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

S&F 75 mm dia UPVC (SWR) down take pipes single socketed, in any length with rubber ring joints fixed to walls all as specified and as directed.

S&F 75mm dia UPVC (SWR) branch pieces, Double 'Y' equal or unequal all as specified and as directed

S&F 75 mm dia UPVC (SWR) vent cowl all as specified and as directed

S&F 75 mm dia UPVC (SWR) bends all as specified and as directed

S&F of 110mm bore UPVC SWR bends of any radius complete all as specified and as directed

M &L for 110 mm dia UPVC (SWR) pipes single socketted, in any length with rubber ring joints, fixed to walls all as specified and as directed.

Supply and fix UPVC (SWR ) branch piece (Single Y) ,equal or unequal ,110 mm bore and all as specified and as directed.

Supply and fix UPVC (SWR ) junction (Single T) equal or unequal ,110 mm bore with access door and all as specified and as directed.

M&L for UPVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement including PCC foundation and side wall complete all as specified and as directed.

S&F 110 mm dia UPVC (SWR) vent cowl all as specified and as directed

Demolition of reinforced concrete of any description (reinforcement cut as required to facilitate demolition)& in Roofs, floors (other than ground floors), beams, chajjas and similar suspended works complete all as specified and as directed.

M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone aggregate as in chajjas complete all as specified and as directed.

M&L for Formwork to chullah hoods, chajjas, through and similar items including edges complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.complete and all as specified and as directed ..

S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.complete all as specified and as directed.

M&L for cutting holes in brick walls exc one brick but not exc two bricks walls in cement mortar and stone walls built in lime mortar for inserting holdfasts etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M&L for bands,straps, supports or stays and hold fasts if required hooks small articles confirming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in bed block for fixing holdfast etc.and set in CM 1:4 complete all as specified and as directed.

Material & Labour for PCC (1:5:10) type E2 using 40mm graded stone aggregates as in sub base of floors filling mass concrete in sunken floor of WC etc as specified and as directed

Demolition and breaking up 200mm drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in fdn , mass concrete etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone agg in coping including necessary form work all as specified and as directed.

M&L for Rendering 15mm thick on brick or block masonry/concrete surfaces in CM 1:4 using water proofing compound finishing surface even and smooth without using extra cement (WPC measured and paid seperately) all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 to block masonry finishing the surfaces even and fair complete all as specified and as directed.

M&L for Reinforced concrete pipes, class NP3 pipe 150mm dia laid in trenches and jointed with collars all as specified and as directed.

M&L for concrete bed to drain pipe 150mm dia including packing under and haunching against the sides of pipes after they laid and tested in cement concrete 1;4;8 type D2 using 40 mm graded stone aggrigate complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in surface channel/ benching inside the manhole all as specified and as directed.

M&L for Precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in , cover slabs (for manholes etc) shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and as directed.

M&L for Mild steel TMT bars 6 to 8 mm dia. cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface drain , benching etc including necessary formwork. complete all as specified and as directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 27 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Removing excavated material n. exc 50 mtrs and depositing where directed at a level n exc 1.50 m above the starting point in soil complete all as specified and as directed.

M&L for hard core with broken stone of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base for floors/pavings etc all as specified and as directed.

M&L for Sand cushioning 50mm thick spread, levelled uniformely and consolidation etc. all as specified.

M&L for Machine pressed precast conctete interlocking paver block grey cement and pigment any shape and size confirming to IS 15658-2006of 60 mm thickness, M-35 Grade complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, manholes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dence soil complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B1 using 20mm graded broken stone aggregate as in precast kerb stones set in cement mortar 1:4 complete all as specified and as directed.

Excavating in post holes (or similar holes) in hard/dense soil, each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick for back side of wall etc complete all as specified and as directed..

Removing excavated materials (surplus Soil) to a distance exceeding 50 m and n.exc 250 mtr from starting point.and depositing where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and as directed..

M &L for providing precast cement concrete block masonry in PCC 1:3:6 type C1 using 20mm graded stone aggregate solid building blocks exc 10 cm in width and setting in cement mortar 1:4. complete all as specified and as directed.

Material and labour for applying three coats of white wash on plastered surface including necessary preparation of plastered surfaces all as specified and as directed.

S&F for medium grade MS tubular truss including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161 1979 GRADE St 240 complete all as specified and as directed.

M&L for roof trusses (framed), trussed, purlins, crane rantries, rails and fastening and heavy brackes framing (beam, Tee, Angle, Channel or flat sections) incl distance pieces, cleats etc all as specified and as directed.

S&F Mild steel screw bolts (machine made) 5 to 10 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long etc complete as specified and as directed.

S&F Fe 410W (Gde E-250) quality A for 6mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom of GI pipe complete all as specified and as directed conforming to Fe-410W.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet with tile profile 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making arch shaped/curved eves ends complete all as specified and as directed.

S&F 6mm thick Asbestos Cement corrugated or semi corrugated sheets fixed with J or L hooks in roofing. complete all as specified and as directed.

S & F for Chequered cement concrete colour tiles 20 cm X 20 cm X 25 mm thick(25cmX25cmX25mm thick) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , complete all as specified and as directed.

Surface excavation n.exc 300 mm deep and average 220mm deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base & finishing the surfaces of sub base of floor roughened to receive top finishing etc complete as specified and as directed.

M&L for cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) 40 mm thick as in flooring finshed even and smooth with out using extra cement complete all as specified and as directed.

M&L for 100mm thick Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate finish surface even and fair without using extra cement complete all as specified and as directed.

M&L for finishing surfaces of concrete by brooming complete all as specified and as directed.

S&F glass dividing strips, 3 mm thick and 38mm wide complete all as specified and as directed.

M & L for rendering 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces,sunken floors bottom and sides and finished even and smooth mixed with liquid water proofing compound complete all as specified and as directed.(water proofing liquid will be measured and paid separatey)

Supply only liquid water proofing compound all as specified.

Taking down carefully Aluminum/copper point wiring complete for light, fan,5 Amps socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders switches,sockets, fan,regulators,ceiling roses, call bells etc but excluding light fittings and making good to disturbed area, complete all as specified and as directed.

M&L for surface Point wiring complete with 1.5 Sqmm single core PVC insulated FRLSH unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through PVC conduits and provision of one run of PVC insulated FRLSH unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of pressed steel terminal box of suitable size & 1.6 mm thick duly painted inner and outside by anticorrosive paint, with 3 mm thick bakelite hylum laminated sheet cover with screw, cup washer for mounting switches/ sockets etc. for one light point controlled by one switch 1 way including making good disturbed wall to match with existing surfaces and fixing of PVC conduit on wall surface complete all as specified and as directed.

All as described in item No. 149 here in before but for one light point controlled by two way switches.

All as described in item No.149 here in before but for one fan point controlled by one switch through regulator.

All as described in item No. 149 here in before but for one exhaust fan point controlled by one switch.

All as described in item No. 149 here in before but for one bell point controlled by one bell push.

All as described in item No. 149 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 149 here in before but for one 05 Amps socket outlet on the same board with other switches

All as described in item No.149 here in before but wiring with 2.5 Sqmm single core PVC insulated FRLSH unsheathed 1100 volt grade multi-stranded copper conductor cable and with one run of single core PVC insulated FRLSH unsheathed 1100 volt grade multi-stranded copper conductor cable of size 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete for one 15 Amps power socket point on independent board all as specified and as directed.

M & L for sub main wiring with 2 runs of single core PVC insulated unsheathed multi-stranded copper conductor FRLSH cables of size 6 Sq mm drawn through and including PVC conduits of suitable size surface type wiring with all necessary fitttings and provn of one run of 6 sqmm pvc insulated unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly and including taking down existing unserviceable submain wiring any type complete all as specified and as directed. Note:- Two runs of single core Pvc copper conductor of size 6Sqmm and one runs of PVC conduits and one run of 6 sqmm pvc unsheathed copper conductor for earth conductor shall be measured as one unit length.

M & L for Sub main wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLSH of size 4 Sqmm drawn through and including PVC conduit of suitable size surface type with all necessary fittings and provn of one run of 4 sqmm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor and connecting to common earth dolly and including taking down existing unserviceable submain wiring any type complete all as specified and as directed Note:- Two runs of single core Pvc copper conductor of size 4Sqmm and one runs of PVC conduits and one run of 4 sqmm pvc unsheathed copper conductor for earth conductor shall be measured as one unit length.

S&F switch piano type 5 Amps flush button 230 volts AC one way, complete all as specified and as directed.

S&F switch piano flush type 15 Amps 230volts, complete all as specified and as directed.

S&F switch piano type 5 Amps flush button 230 volts AC two way, complete all as specified and as directed.

S&F bell push flush type AC 230 Volts 5 Amps, complete all as specified and as directed.

S&F socket outlet 5 Amps 3 and 5 pin flush type multipurpose, complete all as specified and as directed.

S&F socket outlet 15 Amps 3 and 5 pin 5 and 15 Amps flush type multipurpose, complete all as specified

S&F fan regulator electronic step type suitable for 1200/1400 mm sweep ceiling fan complete all as specified

S&F call bell ding dong AC 230 volts, complete all as specified and as directed.

S&F ceiling rose 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed

S&F in repairs surface mounting LED light fitting, 4 ft long, 1x 20W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, integrated LED strip 18/ 20 W and electronic driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block and provision of 2 Nos. of PVC square blocks all as specified and as directed. Make: HAVELLS Cat No LUMILINE PLUS BS 20W LED 865S PCSS or equivalent in Philips/ Wipro as approved by GE

S&F in repairs surface mounting LED light fitting, 2 ft long, 1x 10W, 230V, wall/ ceiling mounted type, with polycarbonate housing, integrated LED strip 9/ 10 W and electronic driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and as directed. Make: HAVELLS Cat No LUMILINE PLUS BS10W LED 865S PCSS or equivalent in CG/ PHILIPS/ WIPRO as approved by GE

S&F in repairs surface mounting LED light fitting, 1ft long, 1x 5W, 230V, wall/ ceiling mounted type, with polycarbonate housing, integrated LED strip 4/5 W and electronic driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and as directed. Make: HAVELLS Cat No LHEXBLP 7IN1W005 or Equivalent in PHILIPS/ WIPRO/CG as approved by GE

S&F in repairs energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LED 10 W 6000K with all accessories internally pre wired including suitable size wooden board with sunmica top and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed. Make: Havells ENDURA RUGBY NEO N - IP65 Cat No RUGBYNEONFT10WLED 860SSYMTOPC or equivalent in CG/ Philips/ Wipro as approved by GE

S&F in repairs 25 Watts LED security light fitting, with pressure die cast aluminium housing and lens embedded PC cover having top opening separate driver compartment with IP65 protection, 25 Watts high power LEDs, electronic driver including all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block including provision of bracket made out of GI pipe light grade of suitable size and length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. complete all as specified and directed. Make: ENDURA PEARL model of HAVELLS Cat No ENDURAPEARLSL 25W LED 757SASYTOPCMP or equivalent in Crompton Greaves/ Philips/ Wipro as approved by GE

S&F in repairs or replacement of exhaust fan, 300mm sweep, 1350 RPM, 230 Volts, single phase, heavy duty, metal body with fixing arrangements with necessary grouting and fixing arrangements including making circular hole in suitable size of plywood and necessary grouting on it with fixing bolts and that plywood fitted in existing window and provision of 3 core flexible copper conductor cable of size 1.5sqmm size from ceiling rose to connector of exhaust fan, including making good distubed surfaces all as specified as directed. Make: Havells Model - Ventil Air DS or equivalent in Crompton,Phillips as approved by GE .

S & F smart AMR Meter, 10 to 60 Amps capacity, Digital type, suitable for Single Phase two wire electric distribution, 240 V, AC, 50Hz, with Class-1 accuracy conforming to IS 13779 and relevant IES standards with inbuilt low power ratio frequency (LPRF) communication facility in 865-867 MHz Cyantech or equivalent mesh network with default and demand display, billing data generation facility, micro processor and LED/ LCD based circutry, tamper proof, including provision of 2nd class hardwood box of suitable size with Sunmica top and connecting up, testing, sealing the meter and writing MES number all as specified and as directed. Note: Rate quoted for this item shall also include for S&F configuration of cloud hosted multi user web based software as per company specification for each meter. Make: L&T/ CAPITAL/ CYANTECH(70 for qtrs + 16 for stair case)

S & F Data Concentrator Unit IP 51 rated Data Concentrator Unit (DCU) compatible for remote Automatic Meter Reading (AMR) solution and capable of communicating with the static energy Meter in the corresponding frequency band and with the data server through GPRS and shall have minimum data transfer rate of 9600 bps, internal memory to store data of 50 modules for 6 month period and shall be based on Cyantech Mesh network within 50 metre range with an IP 65 box. Make - L&T, Capital, Cyantech as approved by GE

S&F Sheet Moulding Compound (SMC) box of size 250x250x155 mm or suitable size for single phase meter, off white colour, with front hinged type door and locking arrangement, front side transparent and of size suitable for single phase AMR Meter and box fixed on wall with suitable Screws complete all as specified and as directed. Make: SINTEX (GS MB 2525 NF) or equivalent as approved by GE

S&F Sheet Moulding Compound (SMC) box of size 350x250x150 mm or suitable size for DCU, off white colour, with front hinged type door and locking arrangement, front side transparent and of size suitable for three phase AMR Meter/ Data Concentrator unit/ Repeater unit etc. and box fixed on wall with suitable Screws complete all as specified and as directed. Make: SINTEX Cat No GSMB 3525NF or equivalent as approved by GE

S&F Sheet metal enclosure type TP&N Vertical Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 8 Way with double door type and fixed flush in wall including cutting chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. Havels Cat No DHDLVDRWGOF008 or equivalent in Crompton Greaves/ Philips/ Wipro as approved by GE (Note-MCCB & MCB TPs will be measured separately)

S&F MCCB TPN 100 A with breaking capacity 16KA 50HZ AC supply (Fixed thermal & fixed magnetic setting ICS=100% of ICU) including dismantling old one, complete all as specified and as directed.

S&F Sheet metal enclosure type epoxy powder coated MCB distribution box double door SPN 12 way for MCBs with rated 200 Amps common bus-bar at incoming end of outgoing MCBs and fixed flush in wall including cutting chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note- MCBs will be measured separately)

S&F RCBO SPN type 40 A, 240V,30MA 50Hz, with 10 kA short circuit capacity, AC supply incl dismantling old one, complete all as specified and as directed. Make : Havells Cat No DHCEACSN2030040/ Standard/ IndoAsian

S&F MCB SP 240 Volt of capacity 40 Amps ‘C’ series, complete all as specified and as directed. Make: Havells/ Standard/ Indo Asian

S&F MCB SP 240 Volt of capacity 6 to32 Amps ‘C’ series, complete all as specified and as directed. Make: Havells/ Standard/ IndoAsian

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground vertically (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia (7.5m long) by means of GI bolts, nuts, washers and GI wire protected by 15mm dia light grade GI pipe (7.5m long) and watering arrangements with 20mm dia GI pipe medium grade and GI funnel all as specified and as shown in electrical plate No 3 of MES SSR Pt I including necessary excavation and earth work in any type of soil charcoal,dust salt,PCC 1:2:4 type B1 in chamber,40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and as directed.

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm x 4 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete all as specified and as directed. Note: Excavation, earth work, sand cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule. Make : Polycab/ Standard/ Havells

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, laying of cables/ GI tubes etc, and getting out in any type of Soil all as specified and as directed.

Returning, filling in incl spreading levelling & well ramming in layers n exc 25cm thick with soil obtained from excavation from any type of soil.all as specified and as directed.

Removing of excavated material/surplus soil n exc 50m & depositing where directed at a level n exc 1.5m above the starting point for any type of soils. all as specified and as directed.

M&L for approved riddled earth, spread dry in trenches & compacting for cable cushioning at bottom and top including punning down all as specified and as directed. Note :- Punned thickness will be considered for payment.

M&L for burnt bricks, old size, sub class 'B' of designation 75, laid in trenches as in protection for UG cables all as specified and as directed.

S&F in repairs MCB DB SPN 2 Way without bus bar and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and as directed.

S&F MCB SPN 5-32A 10KA 'C' series 50Hz 240 Volts AC supply all as specified and as directed. Make : IndoAsian/ Standard/ Havells

S&F GI pipe light grade 40mm dia with all fittings & fixed complete on pole/walls/in road etc for cable protection all as specified and as directed.

S&F ceiling fan, 230 volts, single phase, 1200mm sweep, 5 Star rating and fixing the fastener ceiling for hanging of ceiling fan with all accessories complete all as specified and as directed. Make: HAVELLS Model No. ES-50 5 STAR or equivalent model in makes CG/ ORIENT as approved by GE

S&F storage type water heater (Geyser), vertical type, 25 litres capacity, 2000/1500 Watts, 5 Star rating including drilling holes into wall, provision of 4 Nos of suitable size anchor bolts, nuts and washers, connecting up electrical & water supply lines, testing complete all as specified and as directed. Make: MONZA EC model of HAVELLS Cat No GHWAMFSWH 025 or equivalent model in RACOLD/ BAJAJ as approved by GE.

S&F Single pole and neutral enclosure, powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V, including provision of one single pole MCB 20 Amps 'C' curve type all as specified and as directed. Make : IndoAsian/ Standard/ Havells.

S&F PVC connection 15mm size with PTMT nuts and suitable for hot/ cold water supply with suitable length all as specified and as directed.

M&L for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position including testing complete all as specified and as directed.

Supply and fix PP-R Ball valves (brass insert) as per requirementof the site, 25 mm (1”) dia pipe and including taking down existing ball valves of any discription and type and size complete all as specified & directed.

M&L for 3-layer PP-R Polypropelene of size outer dia 25 mm (random copolymer)concealed pipes SDR 74(PN 16)UV stabilized and antimicrofial fusion welded having thermal stability for Hot &Cold water supply including all PP-R plain and brass threaded poly propelyne random fittings fixed complete to walls ceilings or in floors etc, and including taking down existing water pipes of any discription and type and size complete all as specified & directed.

M&L for 3-layer PP-R Polypropelene of size outer dia 20 mm (random copolymer)concealed pipes SDR 74(PN 16)UV stabilized and antimicrofial fusion welded having thermal stability for Hot &Cold water supply including all PP-R plain and brass threaded poly propelyne random fittings fixed complete to walls ceilings or in floors etc, and including taking down existing water pipes of any discription and type and size complete all as specified & directed.

Supply and fix PP-R Gate valves (brass insert) as per requirement of the site, 25 mm (1”) dia pipe and including taking down existing gate valves of any discription and type and size complete all as specified & directed.

Supply and fix PP-R Gate valves (brass insert) as per requirementof the site, 20 mm (3/4”) dia pipe and including taking down existing gate valves of any discription and type and size complete all as specified & directed.

Taking Down existing Cement Tank of any capacity and any height and disposing it at a distance not less than 50 mtrs

nhsaluji and associates

Phoenix Infra

VIRENDRA FABRICATORS

B G GODSE ENGINEERS AND CONTRACTORS