Interior and Fit-out works in office space of Bureau of Immigration (BOI), J-700 and J-800, Tower-J, World trade Centre, Nauroji Nagar, New Delhi-29

BILL OF QUANTITIES (BOQ)

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 16,157,637.46 39,708,132.24

3 PLUMBING & FIREFIGHTING WORKS 4,460,382.65 1,397,581.00

4 FURNITURE - 57,691,970.00

5 ELECTRICAL WORKS 12,509,276.00 16,223,202.00

TOTAL i/c GST 188,586,944.84

2 IT equipments (racks, switches, patch panels, etc.)

4 Artworks, paintings, sculptures etc.

5 Access control and CCTV equipments (only lowside considered)

6 Pots & Plants

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar,

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

1 Masonry & Plaster

2 Paving & Wet Works

3 Partitions & Wall Cladding

6 Finishes & Miscellaneous

GRAND TOTAL (Carried Forward) 55,865,769.70

GRAND TOTAL (Carried Forward) 55,865,769.70

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

CIVIL & INTERIOR WORKS

1 MASONRY AND PLASTER

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete

work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of

1.1 4.20 laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of

the engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In

case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor

shall have discretion to either re-design the mix or bear the cost of extra cement.

4.20.2 All works above plinth and upto floor V level

4.20.2.2 Concrete of M15 grade with minimum cement content of 240 kg /cum cum 248.25 9,341.80 2,319,101.85

1.2 4.14 Extra for concrete work in superstructure above floor V level for each four floors or part thereof. cum 248.25 169.45 42,065.96

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 600.00 1,123.80 674,280.00

1.4 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. SQM 600.00 104.80 62,880.00

1.5 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix.

1.6 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the

cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size).

1.8 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

1.9 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 12.00 736.40 8,836.80

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 120.00 107.85 12,942.00

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP Punning over cement plaster

in line & plumb finished smooth to receive paint. (Internal surfaces of walls).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry

mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg

/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4

1.12 22.5 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 SQM 140.00 617.05 86,387.00

kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes

preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk or Raised Areas as a Back fill or

1.13 MR platform. Laying should be done in layers with pounding done at every level to ensure a proper cavity free installation CUM 14.00 5,721.00 80,094.00

without disturbing any existing services in the area. Cost to also include haunching for plumbing pipes.

SUB TOTAL OF MASONRY AND PLASTER 3,744,369.59 240,054.00

3 PAVING AND WET WORKS

TILE DADO :- Providing and fixing vitrifed wall tiles conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours of any size 1200mm x 600mm or as approved by Engineer-in-Charge,

3.1 MR in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and SQM 245.00 1,562.00 382,690.00

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear

portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm

11.51 (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4

kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including

rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. SQM 140.00 6,603.35 924,469.00

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical,

abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished

surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm

11.52 thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and

jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to

match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. SQM 55.00 6,927.35 381,004.25

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all

3.3 11.40 colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 SQM 50.00 1,439.40 71,970.00

Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and

matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of upto 5 mm width, using epoxy grout mix of 0.70 kg of organic

3.4 coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge.

Providing and fixing removable raised/false access flooring with system and its components of approved make for

different plenum height with possible height adjustment upto 50 mm,comprising of modular load bearing floor panels

supported on G.I. rectangular stinger framework and G.I. Pedestal etc. all complete, as per the architectural drawings,

as specified and asdirected by Engineer-in-charge consisting of:

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2

mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom

of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer

diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the

pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate

using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick

having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring

maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the

floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a

minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all

complete as per the architectural drawings, as specified and as directed by

the Engineer-in-charge

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure

Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom

pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and

bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The

panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate

is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The

access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm

thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of

363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel

blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of

50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All

specification must be printed on the side of the panel to ensure the quality of the product.

11.54.1 300 mm Finished Floor Height (FFH) SQM 140.00 5,623.95 787,353.00

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets with Granite stone top (with

straight edge polished nosing) complete with base cabinet made of 20mm BWP board, outside surface (shutters)

finished in 1mm thick Laminate of approved shade. All internal surfaces to have balancing laminate. The rate inclusive

of necessary hardware, handle lock sets, self closing hinges, spring loaded shutter, latch inside, all cabinet hardware

complete as per Architects approval. (BR of stone to be taken as Rs 1600/Sqmt). Width of work top counter 600mm/

detailed drawings.

Supply of modular carpet of approved model and shade and made with 100% nylon 6/6.6 tufted textured tiles of

minimum 500mm x 500mm in size, stain resistant, anti microbial, and having colour fastness to water, fastness to

light, rubbing fastness and castor chair suitability as per relevant standard for heavy commercial usage, with 100%

PVC free Backing with having average density 6000 oz/cu. yd. or more,Nominal total thickness of 5.9mm, and Pile

weight – 16-18 oz/ sq yard. Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled content

complying to GRIHA requirement, including fixing with GRIHA compliant adhesive of approved make, minimum 15

years manufacturer's warrantee, all complete as per drawings, manufacturer's specifications and direction of

Engineer in Charge

Providing and Fixing of 15mm thick Engineered Woooden Flooring with plank width of 135/185mm and length of

1800/2100mm and top layer up to 3mm in approved finish. Surface of Top layer shall be pre finished with several

layer of UV hardened Acrylic lacquer. The product shall be Free from Formaldehyde and solvents. Flooring plank shall

be interlocked using Plank locking system in a glue less floating manner. Engineered wood planks shall be a

composition of 3 layer of Pine wood with direction of each layer oriented at right angle to the adjacent layer of

natural strain in Lacquer and Beveled in length and width as specified by the manufacturer-in-charge. Product shall be

MAKE IN INDIA. The cost to include providing and fixing of all acessories i.e Skirting, beading, profile etc. and Underlay

2mm PE foam and polythene combo with 40 Micron complete as required.

TOTAL FOR PAVING & WET WORKS 7,446,073.05 3,003,975.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

4 PARTITIONS AND WALL CLADDING

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I. frame and required

board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with

zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with

dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and

the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws

with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm

long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99

mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards,

fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and

two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster

board conforming to IS: 2095:

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall paneling using board of required

thickness fixed on the ‘W’ profile (0.55 mm thick ) having a knurled web of 51.55 mm and two flanges of 26 mm each

with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of

30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling

with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’

profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of

engineer-incharge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide

jointing tape to provide seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. Glass with anodised Aluminium

frame fixing glass with snap on option consisting of top, bottom and side frame measuring 40-46mm x 18mm-26mm

complete with glazing rubber as per manufacturer's specifications and instructions of Engineer- in-charge. Rate

include supply & Installation of 12 mm thk toughened glass with double sided adhesive tapes for glass to glass butt

joints. Partition system from FFL to False Ceiling level, inclusive of cost of support required for fixing in the ceiling.

The frame to be powder coated in desired shade as per the instructions of the Architect.

PARTITIONING - Partition using 12mm thick fire rated plywood fixed on both sides on aluminium Studs Frame 50mm

x 50mm x 1.5mm & 50mm x 60mm x 1.5mm as per approved sample and architectural drawings placing the same

600mm c/c. Aluminuim frame to be fixed to floor and RCC Ceiling using fastners. The cost to include finishing visible

edges with 12mm thick mdf strip as per detail drawings.

PANELLING- Panelling using 12mm thick fire rated plywood fixed on one side on Aluminium Frame 50mm x 25mm x

4.5 MR 1.5mm as per approved sample and architectural drawings. Aluminium frame to be fixed to walls, floor and RCC SQM 1,308.00 2,653.00 3,470,124.00

Ceiling using fastners.

4.6 MR Cladding using 12mm thick fire rated plywood on existing frame/ surface. SQM 20.00 20.00 1,676.02 33,520.45

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer of approved design and shade,

cladded on to existing partitioning. (base rate Rs. 1450/- sqm)

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with

following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2.

Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to

dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer

layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade

melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which

again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in

required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,

which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun

using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of

Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

4.9 MR LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood surface. SQM 2,350.00 1,444.00 3,393,400.00

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having

4.10 12.62 density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers SQM 910.00 322.50 293,475.00

and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and Fixing of Channeled Woodworks perforated panels Custom Perforated of width 192mm, thickness of

17mm and length 2440 mm , made of a HDHMR FR Grade board with minimum 860 Kg/M3 density substrate with a

laminated facing as per the approved shade & finish (Khaya Mahagony/Fusion Mapple/ Bavarian Beech) and a

melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 3mm width

Custom Perforaton of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special

clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having

NRC of 0.60. The panels shall be mounted on special aluminium splines (keel) using clips provided by manufacturer.

4.10 MR INSTALLATION: SQM 20.00 4,518.00 90,360.00

Screw the aluminium extruded keel for channelled woodworks provided by manufacturer over the solid wall/ surface

an on-centre distance of 600mm. Place the inside clip on the groove end of the panel along the Al keel and then place

the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the

earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved.

Installation to be carried out by Trained Installation team & Installation should be carried out as per manufacturer

recommended procedure.

Providing and installation of PET Panels made of Polyester in size 2440x1220 mm with thicknesses of 9mm. Density is

1650 gsm for 9mm, The panel can plain/printed/ embossed/ customized to form different patterns. Panels can be cut

to customize shape and size to make different patterns. The acoustic panels should have an NRC of up to 0.3-0.7 PET

Panels should be made of recycled material and should be 100% recyclable. The panels need to be installed as per

approved pattern and color on a plain wall. The panel needs to be glued or nailed with headless nails.

Technical Specs:

Sheet Size: 2440mm x 1220mm

Tolerance: +/- 5%

Density: 1650 gsm

Fire Resistance: EN13501 – Class B s1, d0(SGS)

NRC: 0.3 – 0.7mm, depending on the air gap between the wall and the panel

Shades: 36 shades available

Material: 100% Polyester.

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood

particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior

grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with

polyurethane primer (fittings to be paid separately).

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle

board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one side decorative

4.13 9.129 lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick SQM 15.00 2,307.35 34,610.25

with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-

LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply Board finished using 1mm

thick laminate. The storage shall be complete with all hinges, drawer glides and hardware from approved make. All

4.14 internal surfaces to be completed using balancing laminate. Including brass D-type handles for shutters and recessed SQM 6.00 12,321.00 73,926.00

type handles for drawers. Storage to be of all heights as per design. Storage shutters to be made in solid laminate/

glass as per design and drawings.

VENEER STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply Board finished using 4mm thick

veneer and polished in melamine to match the veneer cladding item. The venner to be same as the venner cladding

under separate sub- head above complete with all hinges, drawer glides and hardware from Hettich or equivalent. All

internal surfaces to be completed using balancing laminate. Including brass D-type handles for shutters and recessed

type handles for drawers. Storage to be of all heights as per design. Storage shutters to be made in solid veneer/

glass as per design and drawings. (Base Rate of veneer -Rs. 1450/- sqm)

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of 19mm Commercial

Plybaord finished in 1mm Laminate. Shutters to be fixed to a frame. Rigidly fixed on both sides and top finshed in

4.16 MR laminate. No internal carcass required. All Hinges of hettich or equivalent. Internal Surface of the shutter in balancing SQM 8.00 6,819.00 54,552.00

white laminate. All shutters to be provided with Stainless steel louvers at the top and bottom of the shutter as per

the site requirements and instrcution of the Engineer In charge.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 1,484,208.25 14,566,560.45

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with

6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular

to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint

and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 1,377.00 1,355.80 1,866,936.60

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and fixing suspended Stratopanel, Size 1200X2500X12.5mm round random perforation G8/15/20 with 9.9%

perforation, NRC upto 0.55 : Round rectangular perforation of glass-fibre reinforced gypsum material, which includes

providing and fixing GI perimeter channels of size 0.55 mm. Thk. having one flange of 20 mm and another flange of 30

mm and web of 27 mm along the perimeter of the ceiling, screw fixed to brick wall/ partition with help of nylon

sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thk with two

flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x 10mm x 0.55mm thk

5.2 fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thk having web of 51.5mm & SQM 800.00 4,520.00 3,616,000.00

two flanges of 26mm each with lips of 10.5mm are fixed to the intermediate channels with help of connecting clips

and in direction perpendicular to the intermediate channel with centers of 333 mm perforated gypboard is then

screw fixed to ceiling section with 25 mm dry wall screws at 300 mm centers to G.I. framing in perfect level. Screw

fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally the boards

are to be joined and finished so as to have a flush look with uniflot. The false ceiling surfaces shall be prepared to

the satisfaction of the EIC

Providing and fixing suspended Demountable acoustic ceiling in recessed grid system -600 x 600 x12.5mm with round

4mm holes, c/c 10 mm with upto 0.8 NRC. The item to include all required accessories complete and shall have the

following minimum specifications.

Material: Perforated plasterboard

Board type: Ceiling tile

Length x width x thickness: 600X600X12.5mm

Edge: E+, recessed grid system ( 8mm recess)

Perforation: Round 4mm

Surface: Water-based acrylic paint

Colour: White NCS 0701 Y24R, RAL 9003; gloss 5

Attachment: 15 or Silhoutte T-grid system

Edge section: 20x24 mm angled profile, 15+15 x 8+25 mm cornice moulding

Suspension: Recessed grid system

• Distance between hangers ≤ 1200mm

• Distance from wall to first hanger in direction of load - bearing section ≤ 400mm

• Distance between load bearing sections ≤ 1200 mm.

• Distance from wall to first load - bearing section ≤ 600 mm

• Sub-division executed with cross - sections length 1200 and 600 mm

• Screw spacing for attachment of edge sections length 1200 and 600 mm

• Light sockets of upto 3.0 kg can be integrated directly into the ceiling tiles. In the case of heavier fittings, load must

be taken up directly by the concrete deck or via the grid systemand extra hangers.

Fire rating: A2-s1,d0

300MM X 1200MM MINERAL FIBRE GRID - Providing and fixing of mineral fiber ceiling tiles, with hot dipped

galvanized steel grid work (Silhotte) , surface chemically cleaned capping pre-finished in baked polyester paint, Main

Tees of size 38 (H) x 15 mm every 1.2M centre to centre, centre to centre to form a grid of size 1200 X 300 mm and

suspending the grid from RCC roof using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm

intervals. And laying mineral fiber Acoustic ceiling tiles MV B-Pin of size 1200 x 300 x 20 OCR mm over the formed grid

having fire rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of > 85%. Noise Reduction Coefficient

(NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk. Humidity Resistance up to 99% at 50’C. The grid to be

used is Silhoutte type as per approval of the architect

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

600MM X 600MM MINERAL FIBRE GRID - Providing & Fixing of Mineral Fibre Ceiling Tiles With 15mm GRID. The tiles

should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 -

0.057 w/m K, Colour White, in module size of 600 x 600 x 16mm. The tile shall be installed with 15*38(web hight)

wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600

mm Cross Tees with a web height of 38mm and need to be installed with Suspension system of manufacturer. The

Tile & Grid system used together should carry a 10 year warranty.

INSTALLATION: The grid should be with 15mm wide T - section flanges color white. The main T runner with length

and size of 15X38mm made from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of size

15X38mm made of .3mm thick of 1200mm long spaced between main T at 600mm center to centre to form a grid of

1200X600mm and second cross T of length 600mm and size 15X38mm made of 0.30mm sheet to be interlocked at

middle of the 1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X19

Installation should be carried out as per recommended procedure. The grid frame should be suspended from ceiling

using M-6 fastener, L Cleat, 4mm GI wire with Stainless steel level adjustible clip which will be attached to Main

Runner at spaced of 1200 c/c

TRAP DOOR :- Providing & fixing Access Panel of size mentioned below having - 1. Outer aluminium frame - thickness

: 1.5mm ( plus 0.2mm thick powder coating) Material : ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm

(plus 0.2mm thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame - material: Hot dipped

galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot

dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard ( Knauf Brand) Type:

moisture resistant ( MR) in green plasterboard liner. 6. Screw ( self - drilling black phosphate ) - Material: mild steel

C1018 - 1022. 7. Sealing strip, width, thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch

lock ) - Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steel Q235. 9. Hinge - Thickness : 4.0mm,

Length: 82mm; Material: SS2172 ( cold drawn steel wire ). 10. Powder coating - Color: white, RAL 9010/ or as

approved complete as per instructions of engineer-in-charge.

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood framings hung

5.6 MR from ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on vertical & 12mm thk. Commercial RMT 255.00 1,022.00 260,610.00

ply on horizontal surface (straight & curved). Inclusive of finishing in Paint.

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by Fixing Natural Teak Veneer on 12mm

Underlay commercial Ply fixed to a subframe made using 50mm X 50mm Kiln seasoned and chmeically treated

hollock wood fixed to RCC ceiilng using Fastners complete as per the instructions of the Engineer In Charge. (base

rate of veneer Rs. 1450/- sqm)

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to macth the specifications

same as gypsum ceiling.

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to macth the specifications same

as gypsum ceiling.

Providing the wooden cove of 150mm x 150mm having a facia of 75mm to match the specifications same as above.

5.10 MR The cove shall be cladded including the cost of cladding 4 mm decorated veneer (BR = Rs. 1450/- per sqm) and RMT 90.00 3,152.65 283,738.56

melamine polish.

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum ceiling. In order

5.11 MR to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto 100mm as per drawings. (visible RMT 655.00 367.00 240,385.00

surface of gypsum band to not exceed 100mm) including plastic emulsion paint.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape panels in

wooden finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm.

Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 100 mm. Panels

are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with

5.12 MR cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or SQM 75.00 9,127.00 684,525.00

truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm

c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths

up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of

Providing and fixing of linear cell ceiling made out of Aluminium. The assembled cell ceiling panels shall be in size of

600x1200. The assembled cell ceiling panels shall made out of main blades in 3mm (W) x 20mm (H) in 1200mm (L),

installed at 30mm c.c. and cross connected to secondary blades in 9mm(W) x 22mm (H) in 600mm (L) with 375mm

pitch. The assembled cell ceiling panels are then clipped into U-94 carriers in Aluminium, pre-coated in black

5.13 MR enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-94 carriers. Once the U-94 SQM 210.00 5,554.00 1,166,340.00

carriers are installed then primary angles made out of GMS, type U1040 are cross connected to the U-94 carriers at

1200mm c.c. for lateral bracing The whole ceiling shall be suspended by M6 threaded rods installed 100mm c.c.All

panel modules must be hingeable through wire clips.Finish of cell ceiling panels shall be as per approved sample. The

cost to include all neccesary hardwares and fixing accessories required complete in all respects.

PET BAFFLES: Providing and fixing of PET acoustic baffles OF SIZE 40*120*2400MM made from standard 9mm PET

panels of size 2440mm x 1220mm. The centre to centre spacing can be in multiple of 25mm. Maximum length of one

baffle can be 2440mm and can be increased by joining two or more baffles. The baffles to be installed with help of

specially designed U clamps, 25mm x 25mm x 25mm GI carrier powder coated in black. Spacing between two carrier

to be 1200mm. The carrier should be supported from true ceiling with help of 4mm threaded rods. The NRC of baffle

system to be 0.5

SUB TOTAL OF CEILING 1,866,936.60 9,387,100.56

6 DOORS/ WINDOWS

35MM THICK VENEER FLUSH DOOR WITH FLOOR SPRING- 35mm thick flush Doors finished using 4mm Thick veneer

on both sides panel of size upto 2400mm x 1200mm complete with Hardware including floor spring, Door Closer,

dead Lock with inbuilt key, 1200mm D-Handle etc. including cost of teak lipping all around. All surfaces to be finished

in melamine polish as per approval. The item to include installation of all kinds of latches as per the requirement.

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed out of 45* 40mm

/ 50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium, including 10 mm Toughened Glass. The cost to include

6.2 MR hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock, Door Seal & Gaskets etc. in approved shade Nos 27.00 66,851.37 1,804,986.93

and design as per architectural drawings and instructions of the architect. The size of door shall be upto 1050mm X

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed out of 45* 40mm

/ 50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium, including 10 mm Toughened Glass. The cost to include

6.3 MR hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock, Door Seal & Gaskets etc. in approved shade Nos 6.00 93,296.45 559,778.68

and design as per architectural drawings and instructions of the architect. The size of door shall be upto 1500mm X

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

6.4 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash

fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 2.35 142,949.70 335,931.80

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and

6.5 9.53 wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded EACH 108.00 228.85 24,715.80

stone aggregate 20mm nominal size).

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

LAMINATED FLUSH DOOR- Flush Doors finished using 1mm Thick Laminate on both sides panel of size upto 2400mm

6.6 x 1000mm complete with Hardware including hinges, Door Closer, Mortice Lock with Handle, latches etc. including Nos 18.00 22,813.72 410,646.94

cost of Door frame with melamine/ duco finish. The cost to include providing and fixing of vision panel as per design.

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with necessary screws,

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 1050x2400. with vision panel using wired

glass complete with Fire proof door frame. One side to be finished in fire retardant paint and one side to be finished

in Laminate of approved shade. All Frame to be finished in fire retardant paint. All hinges and hardware to be

thermatically sealed and 120 mins fire rated.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture,

6.9 21.18 including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. SQM 2.40 5,325.90 12,782.16

for fixing required door fittings, all complete as per direction of Engineer-in-charge.

SUB TOTAL OF DOORS 375,619.46 3,213,843.62

7 FINISHES & MISCELLANEOUS

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers

specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 15.00 172.60 2,589.00

7.3 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

13.61.1 Two or more coats on new work SQM 30.00 155.90 4,677.00

Providing & fixing decorative Poly décor fabric Wall Paper (on walls and ceiling) of weight 475 g /sqm as per

approved shade & design including prepration of surface with 2 coats of Nubin Glue based epoxy quote.

HONEYCOMB BLINDS -Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting

of 3" vane size having head rail, rotator rail and bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85

extruded profile, powder coated and provided in standard natural white color. The rolling tube should be made up of

aluminium alloy from extruded profile of 34 mm die. The head rail dimensions should be of suitable size according to

the length of head rail and space available and finished with fabric cover matching with the louver fabric. The

cassette should conceal the working mechanism rotary-clutch. (White polycarbonate spring tempered rotary clutch

which raises), lower and tilts the blinds. White polycarbonate limit assemblies control vane over-rotation, located on

7.5 MR either side of individual blinds. The room darkening fabric of Blind should be of anti-static polyester vanes which have SQM 70.00 16,952.00 1,186,640.00

facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be of white 100% knit polyester,

the colors, textures and opacities as approved. The fabric shall be made of spun- bonded 100% polyester fiber (having

green guard certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN

GUARD Gold certified for low-emitting products to maintain Indoor environment. Upto 80% ultraviolet protection

with vanes open and 90% with vanes closed. The shading to be operated by Easy rise mechanism with a continuous

cord loop operating system. All parts, components & hardware are in approved shade as per direction of Engineer-in-

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

ZEBRA BLINDS -Providing & fixing of Twist Window Shadings Blinds as per the sample shown having room darkening

fabric strip and sheer fabric strips alternately in such arrangement as when light filering strips overlap each other, it

creates visibilty and once the light filtering strips overlaps the sheer ones, it creates the no visibility effect.It has

bottom rail made of aluminium alloy extruded profile, powder coated and provided in fabric coordinated colour. The

rolling tube should be made up of aluminium alloy from extruded profile of Ø34mm. The fabric of this Blind should

be made up of 100% anti-static polyester vanes having light filtering and sheer vanes to reduce glare. Sheer layers

made of white 100% knit polyester & the selection of colors, textures and opacities as per Engineer-in-charge. The

FABRIC shall be constructed from spun-bonded 100% polyester fiber, having Green guard Certification treated with

soil & dust repellant require minimum regular interval cleaning. The fabric has a maximum width of 2.80 M and a

thickness of 0.38mm (+ 5%) and having weight of 272g/m2 (+ 5%).The strip size is Solid 8.5 cm / Sheer 6 cm. The

shading to be operated by Easy rise mechanism with a continuous cord loop operating option. All plastic parts are in

white color. Installation to be done by quick release brackets (wall or ceiling).

ROLLER BLINDS - Providing & supplying of Window Blinds as per the approved sample in required shade and style

consisting, of Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight

460-480G weight per sqm, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89

small testing ISO-5659-2. The tear resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The

DRIVE UNIT shall be of clutch for quick, easy and safe installation, molded plastic with steel spring support and

inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side

or left-hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in position upon

release of the ball chain by means of a built-in friction lock. Universal clutch for left- and right-hand operation. Chain

7.7 MR Gear Ratio of 1.75:1. The END PLUG shall be molded of plastic with a steel location pin. The plug shall be inserted into SQM 320.00 3,242.00 1,037,440.00

the tube end. (Opposite to the Drive Unit) for ease of installation. The SUPPORT BRACKETS shall be of coated steel &

provided with covers and used in right hand or left-hand positions differentiated by the acceptance of the of the

rectangular drive unit support or the round idler plug pin. Can be installed (a) On Face (b) Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum of 80mm.The ROLLER TUBE shall be of extruded

aluminium with 37mm internal diameter & skin thickness of 1mm and shall incorporate a keyway integral with the

tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls molded co-axially to it on 6mm pitch to

form an endless ball chain. It is used for raising or lowering action of the shades.

Reception Table:-Providing & Installation of Reception table of of size upto 3.0m x 0.75m x 0.75m/ 1.2m (ht), made

out of 19mm thk. Commercial Board finished in Acrylic Solid Surface of approved shade and colors complete as per

7.8 MR design. One (1) number Drawer pedestal with 3 lockable drawers and channels (all hardware from Hettich) to be Nos 1.00 243,531.00 243,531.00

provided under the table to be finished in Solid Acrylic surface. All visible surfaces to be finished using Acrylic solid

surface as per details.

Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and

7.9 M.R. any other details as and when desired by Engineer In charge /client. A qualified professsional for the purpose shall be Percent 1% 170,747,307.66 1,707,473.08

appointed after due appproval from Engineer In Charge.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS warranty as

approval of the Architect. (Only film surface area shall be measured and paid).

Preparation of 3D, presentation, etc. as desired by Engineer In charge /client. A qualified professsional for the

purpose shall be appointed after due appproval from Engineer In Charge.

Supply, installation, testing and commissioning of switchable self adhesive smart film with 90% transparency. Film

should be controlled by remote control technology having maximum width 1800mm. Colour of the film to be milky

white for maximum transparency with UV blockage no less than 98%.Measurement from edge to edge of

partition/door section.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured industrially by curtain

coating process with PU lacquer (50 micron thick), opaque (if viewed against a support wall) conforming to EN 16477

standards for back painted glass , of approved color by Architect/ Client fixed with compatible Silicone having Shear

Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time of 10 to 30 mins compatible for installation of

mirror and lacquered glass / Foam based double sided adhesive tape for instantaneous adhesion, compatible with

mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm

thick water proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other

structure. The contractor should submit test reports for backpainted glass from manufacturer - High humidity

Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 (

Taber Abrasion test ) ISO 2409 ( Cross Hatch Test ) standard The manufactured backpainted glass should be

environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12% post

industrial / 6% post consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat

including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.

CORE CUTTING :- Providing and making openings of dia upto 200mm in RCC slab, with core cutting machine inclusive

of filling of core cut with fire retardant sealant of approved make as per the manufacturer's specification, cleaning,

waterproofing the sides of the cut area and providing waterproofing guarantee etc complete. Note: The contractor

should determine the location of beams/post tensioned tendons before carrying out the operation, getting prior

approval from the builder/structural consultant and cutting all reinforcement by gas cutting machine or as directed

etc., complete. As mention by the engineer-in-charge.

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and colour using approved Adhesive to

12 mm thk. Waterproof Plywood of approved brand as per shape, pattern & details given in the drawing. The rate

includes providing & fixing beading, cutting, scaffolding, nails, all materials, labour, lead, lifts, HOM etc., complete.-for

Lift Cladding. (The make, Shade, pattern etc., to be approved by EIC).

SUB TOTAL OF FINISHES 1,240,430.52 9,296,598.61

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

1.0 Manufacturing, providing and placing in position machine made factory assembled Cabin Table of following dimensions with the following specifications.

SD'S Room Providing & Placing Cabin office Table with side unit with following details and specifications :

Top is made of 38mm thick E-1 Grade Pre lam particle board (Environmental Friendly) Board with Veneer Finish with reverse chamfer. The slanted leg in

understructure is made of 38mm thk Pre-Lam Partical Board and 18mm thick Pre-Lam Partical Board modesty panel with 0.4mm thick Veneer Finish. On the

other side the top is supported on combo storage return unit. The switch cut out panel is installed on the side of table with concealed wire management within the

Side Combo Storage: Body of storages made out 18 mm thick (E1 Grade) Pre lam particle board board with 0.4 mm veneer with PVC edge-banding. Side Combo

Storage is combination of 2 nos swing shutter & pull out drawers. The storage should have extruded aluminum handle, as per requirement. Storages should be

provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-

damping mechanism to enable soft closing of doors.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Full Height Back Storage: Body of storages made out 18 mm thick (E1 Grade)Pre-Lam Partical Board with 0.4mm veneer. Back Storage is combination of Wooden

& glass shutter. Glass shutter made out of wooden frame with 4mm thick clear glass. All shelves are adjustable. The storage should have extruded aluminum

handle/recess handle, as per requirement. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided

with Hinge-damping mechanism to enable soft closing of doors. Storages should be provided with adjustable levelers.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

1.1 Size of Table:- 2800x1050x740, Retun table :-1680x4800x593Hmm Nos. 0 1 1 483,800.00 483800

2.0 Manufacturing, providing and placing in position machine made factory assembled Cabin Table of following dimensions with the following specifications.

JOINT DIRECTOR Providing & Placing Cabin office Table with side unit with following details and specifications :

Table Top made out of 38mm thick E-1 grade (Environmental Friendly) particle board cover with laminate and all the edges of worktop shall be provided with

machine pressed 1.5 -2 mm thick ABS edge banding glued with hot melt EVA glue. Understructure consists of MS legs Loop Leg of section 50 x 25mm, where

Structure made from cold rolled steel, thickness 1.2 mm, Epoxy powder coated spray paint, baked at temperature 200 C° coated of 80-90 micron thickness.

Powder coating should be scratch resistance (cross hatch test 6x6 grid method), well supported with beams under table top.

Wire management: Completely concealed wiremanagement with Aluminium anodized flipper with soft closure, wiring tray & beams Made from MS sheet 2 mm.,

flange structure epoxy powder 70-80 micron coated spray color, baked at temperature 200c with vertical wire uptake from floor via middle leg having removable

cover. Wire seperator for data provided in cable tray below fipper.

Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-620 mm ( H). Drawer

body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should have 5 Nos castor fitted to it where in one

castor will be fitted to lower most drawer to provide extra stability.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty

Full Height Back Storage: Body of storages made out 18 mm thick (E1 Grade) Pre-Lam Partical Board with 0.4mm veneer. All shelves are adjustable.The storage

should have extruded aluminum handle/ recess handle , as per requirement. Storages should be provided with adjustable levelers. Door Lock should be of three-

way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-damping mechanism to enable soft closing of doors.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

2.1 Table is of Size: 2400X1000X740, Return storage :-1200x600x740Hmm Nos. 1 1 2 324,500.00 649000

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

3.0 Manufacturing, providing and placing in position machine made factory assembled Cabin Table of following dimensions with the following specifications.

DEPUTY DIRECTOR Providing & Placing Cabin office Table with side unit with following details and specifications :

Top is made of 38mm thick E-1 Grade Pre lam particle board (Environmental Friendly) Board with Veneer Finish with reverse chamfer. Built with top grade Pre-

laminated particle board walnut laminate for lasting durability, natural feel and luxurious looks. It is part of the Inspira series from which you can choose an entire

range of matching filing cabinets, smaller office tables, conference tables etc to create a complete office. Suitable for medium to large size cabins. The slanted leg

in understructure is made of 38mm thk Pre-Lam Partical Board and 18mm thick Pre-Lam Partical Board modesty panel with 0.4mm thick Veneer Finish. On the

other side the top is supported on combo storage return unit. The switch cut out panel is installed on the side of table with concealed wire management within the

Side Combo Storage: Body of storages made out 18 mm thick (E1 Grade) Pre lam particle board board with 0.4 mm veneer with PVC edge-banding. Side Combo

Storage is combination of 2 nos swing shutter & pull out drawers. The storage should have extruded aluminum handle, as per requirement. Storages should be

provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-

damping mechanism to enable soft closing of doors.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Full Height Back Storage: Body of storages made out 18 mm thick (E1 Grade)Pre-Lam Partical Board with 0.4mm veneer. Back Storage is combination of Wooden

& glass shutter. Glass shutter made out of wooden frame with 4mm thick clear glass. All shelves are adjustable. The storage should have extruded aluminum

handle/recess handle, as per requirement. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided

with Hinge-damping mechanism to enable soft closing of doors. Storages should be provided with adjustable levelers.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

3.1 Main Table :- 2100mm X 900mm X 740mm H Side Table Size - 1050mm X 450-500mm X 740mm H Nos. 3 3 6 277,300.00 1,663,800.00

3.2 Back Storage of size: 2000Wx 450D x 740-760Hmm Nos. 3 3 6 153,400.00 920,400.00

3.3 Manufacturing, providing and placing in position machine made factory assembled Cabin Table of following dimensions with the following specifications.

4.0 ADD/JDD Providing & Placing Cabin office Table with side unit with following details and specifications :

Top and legs are made of 25 mm thick Pre-Lam Partical Board (E-1 Grade), finish with matching 2 mm PVC edge-banding. The Modesty panel is made of Prelam

Particle board Grade E-1 (Environmental Friendly) of thickness 18 mm Pre lam particle board with Edge-Banding(PVC) 2 mm.

Drawer Unit : 3 drawer melamine finish pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-620 mm ( H).

Drawer should be made of 18mm thick E1 Grade particle board. Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most

drawer to provide extra stability.

E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply

with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.Low Height Back Storage: Body of storages made out 18 mm thick (E1 Grade) Pre-

Lam Partical Board with Melamine finish with PVC edge-banding. All shelves are adjustable.The storage should have extruded aluminum handle/ recess handle , as

per requirement. Storages should be provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once.

Door should be provided with Hinge-damping mechanism to enable soft closing of doors.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

4.1 Table is of Size: 2100X900X740,Return:-1050x500x740Hmm Nos. 3 3 6 151,040.00 906240

4.2 Manufacturing, providing and placing in position machine made factory assembled Cabin Table of following dimensions with the following specifications.

5.0 AD,PPS & OTHER CABINS Providing & Placing Cabin office Table with side unit with following details and specifications :

Worktop: Cabin Table :- 38mm thick E1 grade Laminate top with PVC edge banding & top with reverse chamfer edge & MS Powder coated beam, aluminium

flipper with net axial box and soft closure.

Understructure: Cone Legs with metal modesty and MS Powder coated beam for support.

Side Storage: Side credenza with combo storage and the combination of drawer &shutter Wiremanagement: Completely concealed MS Powder coated wiring

tray made from steel sheet 1.2 mm., flange structure with vertical wire uptake from floor via tower leg having removable cover one side and wire tray below

worktop.(Back Storage not included) "This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

5.1 Table is of Size: 1500X750X740,Return:-900x450x740Hmm Nos. 13 16 29 70,800.00 2053200

6.0 Manufacturing, providing and placing in position High back Chair Revolving type.

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

SD'S Room main chair Providing and placing in position high back chair for Cabins with comfortable Backrest .Overall Size is : W 680 x D x 680X 1125-1215Hmm , Seat Size: 490Wx 450Dx Nos. 0 2 2 92,040.00 184080

435-525Hmm ,Chair Seat in leatheritte upholstery with headrest - Size: W722 x D712 x H1058 - 1185 mm having SW505 x SD394 - 470 x SH419 - 546 mm ,Seat,

Back: Mesh back, with Seat depth adjustment Back: Flexible back with built in fronds wrapped with lofted mesh Arms:4D Armrests Lumbar: No external lumbar

support. In built back support along the cradle providing total back support Mechanism: Synchronized 3-point tilt, Pneumatic Height Adjustable & 6 Position Back

Lock. Back Recline :Back reclines 24 degrees from the upright position, Edgeless back.Product should be BIFMA gold rated SCSglobal certified for inhouse air

quality and with 05 Years warranty.

7.0 Manufacturing, providing and placing in position Mid back Chair Revolving.

SD'S Room visitor chair Providing and placing Chair of size 700mm W x 700mm D x 1060-1150mm H, seat made up of insert moulded Polyurethane Foam upholstered with foam Nos. 0 14 14 87,320.00 1222480

laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame

upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, seat size 44.5 - 52.5

cm depth (approx.), 46.4 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.), effective back height from Seat - 57 cm (approx.),

polyurethane foam for seat having density 65±4 kg/m3, armrest top injection moulded in polyurethane and mounted on the injection moulded height adjustable

type armrest, armrest height adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable, 360 degree revolving type. mechanism, single point

control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock feature, pneumatic height adjustment of 8.5

cm spine bracket made of aluminum die cast piece connecting to back with mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin wheel castors

(castor wheel dia. 6.0 cm approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors injection moulded in Nylon

etc. all complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Product should be BIFMA gold rated SCSglobal certified

for inhouse air quality and with 05 years warranty.

8.0 Manufacturing, providing and placing in position High back Chair Revolving type.

JOINT DIRECTOR MAIN CHAIR Chair should be high back, cushioned seat assembly, moulded plywood upholstered with moulded polyurethane foam & finished with mesh fabric Back size: (W) Nos. 1 1 2 41,300.00 82600

450 - 500 mm (H) 600-620mm; Seat size: (L) 450mm - 500mm (W) 450 - 500mm with Polyurethane Foam. Polyurethane Foam: The polyurethane foam

(Recyclable) of minimum density = 30 kg/ cum + 2 kg/cum fixed to moulded plywood and upholstered with mesh .4Darmrest of premium quality of SS Chromed

finish with PU cushion pads. Synchro mechanism: 360 degree revolving type, from pivot for tilt with multiple locking position & feet resting on ground for extra

comfort. The pneumatic adjustment has an adjustment stroke of 70-120 mm, and self weight mechanism Pedestal Assembly: should have 5 star aluminium die

cast with hard castors sutable for tiles flooring with adjustment, twin wheel castors & the pitch centre Dia is 650 +/- 50mm. (750 +/- 10mm with castors). Twin

wheel castors: these are made of injection moulded in black PP having 50-60mm dia,complete in all respect. The above chair should be finished / completed as per

above mentioned specifications including providing and fixing of other related materials including hardwares, etc. complete or as directed by the Engineer-in-

Charge and conforming to the image having back curvature in longitudinal and in trasverse direction as per the image. All complete as per manufacturers

specification. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

9.0 Manufacturing, providing and placing in position Mid back Chair Revolving type,

JOINT DIRECTOR VISITORCHAIR Chair should be high back, cushioned seat assembly, moulded plywood upholstered with moulded polyurethane foam & finished with mesh fabric Back size: (W) Nos. 7 7 14 35,400.00 495600

450 - 500 mm (H) 600-620mm; Seat size: (L) 450mm - 500mm (W) 450 - 500mm with Polyurethane Foam. Polyurethane Foam: The polyurethane foam

(Recyclable) of minimum density = 30 kg/ cum + 2 kg/cum fixed to moulded plywood and upholstered with mesh .4Darmrest of premium quality of SS Chromed

finish with PU cushion pads. Synchro mechanism: 360 degree revolving type, from pivot for tilt with multiple locking position & feet resting on ground for extra

comfort. The pneumatic adjustment has an adjustment stroke of 70-120 mm, and self weight mechanism Pedestal Assembly: should have 5 star aluminium die

cast with hard castors sutable for tiles flooring with adjustment, twin wheel castors & the pitch centre Dia is 650 +/- 50mm. (750 +/- 10mm with castors). Twin

wheel castors: these are made of injection moulded in black PP having 50-60mm dia,complete in all respect. The above chair should be finished / completed as per

above mentioned specifications including providing and fixing of other related materials including hardwares, etc. complete or as directed by the Engineer-in-

Charge and conforming to the image having back curvature in longitudinal and in trasverse direction as per the image. All complete as per manufacturers

specification. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

10.0 Manufacturing, providing and placing in position High back Chair Revolving type.

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

DEPUTY DIRECTOR ,ADD/JDD& Providing and placing in position high back Revolving Chair with Adjustable headrest , Overall Chair size: 430-460W x 440-470Dx 1260-1360Hmm, BACKREST: The Nos. 20 23 43 33,040.00 1420720

AD,PPS & OTHER CABINS MAIN CHAIR outer frame of the backrest made of injection moulded in black 20% Glass Filled Polypropylene and inner frame made up of injection moulded in black

polypropylene. Inner frame upholstered with mesh fabric then assembled with outer frame. The back has fix lumber support for achieving comfortable seating

posture. Lumber support size 280 mm (W) x 110 mm (H). Backrest size 780-810 mm (H) x 460-480 mm (W). Spine made of reengineered black nylon. Backrest is

tested for Static testing- 67kg (Functional Load) & 102 Kg (proof Loading) for 1 Min and cyclic testing- 57 Kg Loading for 1,20,000 cycles and will comply to

ANSI/BIFMA X 5.1 standards. SEAT:The seat is made up of 12 mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. The

bottom cover made up of injection moulded in black PP to cover the plywood. Seat size 460-480 mm(W) x 440-470 mm (D). Minimum and Maximum seating

height is 480 mm and 580 mm respectively.Seat Foam: Foam made out of moulded polyurethane foam with the following properties. Average thickness of 55-65

mm with the following properties: Density: 52-55 Kg/M³ , Hardness: 25±/3 KGF ,Compression Set: 10% Max ,Tensile Strength: 0.90 to 1.2 Kg/Cm² ,Resilience: 40%-

60% ,Comfort / Indentation Hardness: 15.4 ,Weight: 650 gms, ARM REST & HANDLES: ADJUSTABLE ARMS:The armrest is made up of Thermo Polyurethane with 40 -

55 Shore Hardness and reinforced with 4 mm thick nylon insert. Arm pad size 235 mm (L) x 80 mm (W). The handle is fitted to the seat with seat/handle

connecting strip assembly made of 35% Glass filled nylon 20 mm thick. Adjustable arm rest with height adjustment up to 70 mm. Minimum and Maximum height

of armrest is 265 mm / 335 mm respectively. The front and back movement of armrest is 60 mm. The Handle is tested for Static Testing-75 Kg loading for 1 min

(Functional Load) and 103 Kg for 15 secs (Proof Load) and cyclic testing- 41kgs for 60,000 cycles and will comply as per ANSI/BIFMA X 5.1. standards. Mechanism,

single point control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock feature.Conventional mechanism

with one lever control for lock and seat height adjustment. Mechanism made out of MS plate thickness is 3 mm and seat’s tilting angle is 3° - 10° and back tilting

angle is 87° - 106°. Also, it has the back tension adjustment knob. The mechanism has a knob to adjust the back tilt tension and is tested for 300000 cycles as per

ANSI/BIFMA X 5.1. Following are the approved mechanism options to use with the chair. pneumatic height adjustment of 8.5 cm spine bracket made of aluminum

die cast piece connecting to back with mechanism, Base: pedestal made of die cast alunimium fitted with 5 nos. twin wheel castors (castor wheel dia. 60 mm

approx.), base pedestal dia 60-70 mm and pitch center dia. 660-680mm with castors, twin wheel castors injection moulded in Nylon etc. all complete as per

direction of Engineer-in-Charge.The base is tested for static load of 1200 kg. Castors:.60 mm: The twin wheel castors are injection moulded in nylon 35% Glass

Filled and diameter of castor is 60mm. The castors are tested for 100000 cycles and will comply as per ANSI/BIFMA X 5.1 standards. Fabric properties: Content :

100% Polyester,Abrasion : 80,000,Flammability : Adheres to BS EN 1021-1 1994 (Cigarette),: Adheres to BS 7176:1995 (Low Hazard) Color Fastness to,Light Adhere

to : 5+ [BS 1006 (1990)],Rubbing: Adhere to Dry: Class 5,Adheres to Wet: Class 4.5, Backrest Mesh Specification: Mesh with the following properties: Content:

100% polyester Weight: 320 GLM Abrasion: 80000 Flammability: BS EN 1021-1 1994 (cigarette) BS 7176:1995(Low hazard) Color fastness to Light: 4.5+ [BS

1006(1990)] Rubbing: Dry: Class 5 Wet: Class 4.5. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 Years warranty.

11.0 Manufacturing, providing and placing in position Mid back Chair Revolving type.

DEPUTY DIRECTOR ,ADD/JDD& Providing and placing in position medium back Revolving Chair , Overall Chair size: 430-460W x 440-470Dx 1060-1160Hmm, BACKREST: The outer frame of the Nos. 49 67 116 27,730.00 3216680

AD,PPS & OTHER CABINS, MEETING TABLE backrest made of injection moulded in black 20% Glass Filled Polypropylene and inner frame made up of injection moulded in black polypropylene. Inner frame

VISITOR CHAIR AND CONFRENCE ROOM upholstered with mesh fabric then assembled with outer frame. The back has fix lumber support for achieving comfortable seating posture. Lumber support size

280 mm (W) x 110 mm (H). Backrest size 780-810 mm (H) x 460-480 mm (W). Spine made of reengineered black nylon. Backrest is tested for Static testing- 67kg

(Functional Load) & 102 Kg (proof Loading) for 1 Min and cyclic testing- 57 Kg Loading for 1,20,000 cycles and will comply to ANSI/BIFMA X 5.1 standards.

SEAT:The seat is made up of 12 mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. The bottom cover made up of injection

moulded in black PP to cover the plywood. Seat size 460-480 mm(W) x 440-470 mm (D). Minimum and Maximum seating height is 480 mm and 580 mm

respectively.Seat Foam: Foam made out of moulded polyurethane foam with the following properties. Average thickness of 55-65 mm with the following

properties: Density: 52-55 Kg/M³ , Hardness: 25±/3 KGF ,Compression Set: 10% Max ,Tensile Strength: 0.90 to 1.2 Kg/Cm² ,Resilience: 40%-60% ,Comfort /

Indentation Hardness: 15.4 ,Weight: 650 gms, ARM REST & HANDLES: ADJUSTABLE ARMS:The armrest is made up of Thermo Polyurethane with 40 - 55 Shore

Hardness and reinforced with 4 mm thick nylon insert. Arm pad size 235 mm (L) x 80 mm (W). The handle is fitted to the seat with seat/handle connecting strip

assembly made of 35% Glass filled nylon 20 mm thick. Adjustable arm rest with height adjustment up to 70 mm. Minimum and Maximum height of armrest is 265

mm / 335 mm respectively. The front and back movement of armrest is 60 mm. The Handle is tested for Static Testing-75 Kg loading for 1 min (Functional Load)

and 103 Kg for 15 secs (Proof Load) and cyclic testing- 41kgs for 60,000 cycles and will comply as per ANSI/BIFMA X 5.1. standards. Mechanism, single point

control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock feature.Conventional mechanism with one

lever control for lock and seat height adjustment. Mechanism made out of MS plate thickness is 3 mm and seat’s tilting angle is 3° - 10° and back tilting angle is 87°

- 106°. Also, it has the back tension adjustment knob. The mechanism has a knob to adjust the back tilt tension and is tested for 300000 cycles as per ANSI/BIFMA

X 5.1. Following are the approved mechanism options to use with the chair. pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast

piece connecting to back with mechanism, Base : Pedestal made of nylon base fitted with 5 nos. twin wheel castors (castor wheel dia. 60mm), base pedestal dia

60-70 mm and pitch center dia. 660-680mm with castors, twin wheel castors injection moulded in Nylon etc. all complete as per direction of Engineer-in-Charge.

Nylon Base: The base is injection moulded in black 35% glass filled nylon and fitted with 5nos. The base is tested for static load of 1200 kg. Castors:.60 mm: The

twin wheel castors are injection moulded in nylon 35% Glass Filled and diameter of castor is 60 mm. The castors are tested for 100000 cycles and will comply as

per ANSI/BIFMA X 5.1 standards. Fabric properties: Content : 100% Polyester,Abrasion : 80,000,Flammability : Adheres to BS EN 1021-1 1994 (Cigarette),: Adheres

to BS 7176:1995 (Low Hazard) Color Fastness to,Light Adhere to : 5+ [BS 1006 (1990)],Rubbing: Adhere to Dry: Class 5,Adheres to Wet: Class 4.5, Backrest Mesh

Specification: Mesh with the following properties: Content: 100% polyester Weight: 320 GLM Abrasion: 80000 Flammability: BS EN 1021-1 1994 (cigarette) BS

7176:1995(Low hazard) Color fastness to Light: 4.5+ [BS 1006(1990)] Rubbing: Dry: Class 5 Wet: Class 4.5. Product should be BIFMA gold rated SCSglobal certified

for inhouse air quality and with 05 Years warranty.

12.0 Manufacturing, providing and placing in position machine made factory assembled Workstation of following dimensions with the following specification

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

Providing and placing Desk Based Workstations with following specifications:

Understructure, Screen and Cable management : Desk based system worktop supported on understructure made of MS legs Beta Leg , where Structure made

from cold rolled steel,thickness 1.2 mm. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should

be scratch resistance (cross hatch test 6x6 grid method). Screen :28mm thick offset Fully alumium frame screen with Combination of Fabric Pinup & marker board

, For Back to back workststion we have taken screen height 360mm above teh top & for Non sharing/ single side we have taken screen plus modesty panel.

Wiremanagement: Completely consealed wiremanagement with vertical wire uptake from floor via MS power pole having removable cover one side and wire

seperator for data and wire seperation, segregates to hozizontal cable tray below aluminium flipper with soft closure Epoxy powder coated spray color, baked at

temperature 200 C°.Raceways contain the horizontal cable channel that fitted with a modesty panel tidily and effectively. Epoxy powder coated spray paint,baked

at temperature 200 C° coated of 80-90 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method) Worktop :Worktop Made

of 25mm thick E-1 grade particle board finished with 2mm PVC edge banding. E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry

board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick

PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The particle board should be E-1 Grade with pvc edge

banding. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-620 mm ( H).

Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45

mm(H) x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide

extra stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.Table top to table top connector: 150-170 mm Width x 120-140 mm

Depth width connector.

Drawer Unit : 3 drawer Metal pedestal with cushion of overall dimensions internal and external dimensions 400 mm (W) x 450 mm (D) x 600 mm ( H). Drawer

body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H)

x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra

stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

12.1 Rectangular Workstation of size:- 1200mm (W) x 600mm (D) x 740mm(Worktop Height) x 1180-1220 mm (Height of panel from Ground) for each person. Nos. 39 49 88 77,880.00 6853440

13.0 Manufacturing, providing and placing in position machine made factory assembled Workstation of following dimensions with the following specifications. 0

Providing and placing Desk Based Workstations with following specifications:

Understructure, Screen and Cable management : Desk based system worktop supported on understructure made of MS legs Beta Leg , where Structure made

from cold rolled steel,thickness 1.2 mm. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should

be scratch resistance (cross hatch test 6x6 grid method). Screen :28mm thick offset Fully alumium frame screen with Combination of Fabric Pinup & marker board

, For Back to back workststion we have taken screen height 360mm above teh top & for Non sharing/ single side we have taken screen plus modesty panel.

Wiremanagement: Completely consealed wiremanagement with vertical wire uptake from floor via MS power pole having removable cover one side and wire

seperator for data and wire seperation, segregates to hozizontal cable tray below aluminium flipper with soft closure Epoxy powder coated spray color, baked at

temperature 200 C°.Raceways contain the horizontal cable channel that fitted with a modesty panel tidily and effectively. Epoxy powder coated spray paint,baked

at temperature 200 C° coated of 80-90 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method) Worktop :Worktop Made

of 25mm thick E-1 grade particle board finished with 2mm PVC edge banding. E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry

board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick

PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The particle board should be E-1 Grade with pvc edge

banding. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-620 mm ( H).

Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45

mm(H) x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide

extra stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.Table top to table top connector: 150-170 mm Width x 120-140 mm

Depth width connector.

Drawer Unit : 3 drawer Metal pedestal with cushion of overall dimensions internal and external dimensions 400 mm (W) x 450 mm (D) x 600 mm ( H). Drawer

body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H)

x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra

stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

13.1 L Shape Workstation of size:- Size : 1500mm (W1) x 1500mm (W2) x 600mm (D1) x 600mm (D2) x 740mm (Worktop Height) x 1180-1220 mm (Height of panel Nos. 105 97 202 99,120.00 20022240

14.0 Manufacturing, providing and placing in position machine made factory assembled Workstation of following dimensions with the following specifications.

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

Providing and placing Desk Based Workstations with following specifications:

Understructure, Screen and Cable management : Desk based system worktop supported on understructure made of MS legs Beta Leg , where Structure made

from cold rolled steel,thickness 1.2 mm. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should

be scratch resistance (cross hatch test 6x6 grid method). Screen :28mm thick offset Fully alumium frame screen with Combination of Fabric Pinup & marker board

, For Back to back workststion we have taken screen height 360mm above teh top & for Non sharing/ single side we have taken screen plus modesty panel.

Wiremanagement: Completely consealed wiremanagement with vertical wire uptake from floor via MS power pole having removable cover one side and wire

seperator for data and wire seperation, segregates to hozizontal cable tray below aluminium flipper with soft closure Epoxy powder coated spray color, baked at

temperature 200 C°.Raceways contain the horizontal cable channel that fitted with a modesty panel tidily and effectively. Epoxy powder coated spray paint,baked

at temperature 200 C° coated of 80-90 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method) Worktop :Worktop Made

of 25mm thick E-1 grade particle board finished with 2mm PVC edge banding. E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry

board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick

PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The particle board should be E-1 Grade with pvc edge

banding. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-620 mm ( H).

Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45

mm(H) x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide

extra stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.Table top to table top connector: 150-170 mm Width x 120-140 mm

Depth width connector.

Drawer Unit : 3 drawer Metal pedestal with cushion of overall dimensions internal and external dimensions 400 mm (W) x 450 mm (D) x 600 mm ( H). Drawer

body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H)

x 110-120 mm (D) x 300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra

stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air qua

14.1 120 Degree Workstation of size:- Size : 1200mm (W1) x 1200mm (W2) x 600mm (D1) x 600mm (D2) x 740mm (Worktop Height) x 1180-1220 mm (Height of panel Nos. 3 0 3 101,480.00 304440

15.0 Manufacturing, providing and placing in position Mid back Chair Revolving type.

WORKSTATION Providing and placing Mid Back chairs . Chair seat made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded Nos. 147 147 294 21,240.00 6244560

&RECEPTION CHAIR foam assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and

mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, Overall chair size: W 63.0 -67.0 cms , D 63.0-67.0 cm ,

H 101.0- 112.0 cm, seat size 48.0 - 52.5 cm depth (approx.), 47.5 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62.5 cm height. (approx.), effective

back height from Seat - 57 cm (approx.), polyurethane foam for seat having density 65±4 kg/m3, armrest top injection moulded in polyurethane and mounted on

the injection moulded 4D adjustable type armrest, armrest height adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable, front and back

movement along with side movement. 360 degree revolving type. mechanism, single point control for seat and back adjustment, front pivot for tilt, tilt adjustment

for back in 3 position locking with antishock feature, pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast piece connecting to back

with mechanism, The pedestal shall be made of nylon base.it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 670mm pitch-centre-dia

700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. . Product should be BIFMA gold rated SCSglobal

certified for inhouse air quality and with 05 years warranty.

16.0 Manufacturing, providing and placing in position machine made factory assembled Meeting Table of following dimensions with the following specifications.

MEETING ROOM Providing & Placing Meeting Table with following details and specifications :

Top is made of 25mm thick E-1 grade particle board finished with the exposed edge of worktop shall be secured with 2mm thick PVC edge banding tape of

approved colour. The height of Worktop shall be 740-760 mm from ground level.

Understructure: MS legs Loop Leg of section 50 x 25mm, where Structure made from cold rolled steel,thickness 1.2 mm. Epoxy powder coated spray paint, baked

at temperature 200 C° coated of 80-90 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method), well supported with

beams under table top.

Wire management: Completely concealed wiremanagement with Aluminium anodized flipper with soft closure, wiring tray & beams Made from MS sheet 2 mm.,

flange structure epoxy powder 70-80 micron coated spray color, baked at temperature 200c with vertical wire uptake from floor via middle leg having removable

cover. Wire seperator for data provided in cable tray below fipper. The profile of table can be U shape/V shape as per the space available.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

16.1 8 pax meeting Table Size - 3250mm W x 1200mm D x 740mm H Nos. 1 1 97,350.00 97350

16.2 20-21 Pax Meeting table Size - 4900mm W x 1200mm D x 740mm H Nos. 1 1 139,240.00 139240

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

17.0 Manufacturing, providing and placing in position machine made factory assembled Meeting Table of following dimensions with the following specifications.

SD'S ROOM Providing & Placing Conference Table with following details and specifications :

Top and Legs are made of 38 mm thick Pre lam particle board (E-1 Grade), finish with matching 2 mm PVC edge-banding. The Modesty panel is made of Prelam

Particle board Grade E-1 (Environmental Friendly) of thickness 18 mm Pre lam particle board with Edge-Banding(PVC) 2 mm.

Wire management: Completely concealed wiremanagement with Aluminium anodized flipper with soft closure, wiring tray & beams Made from MS sheet 2 mm.,

flange structure epoxy powder 70-80 micron coated spray color, baked at temperature 200c with vertical wire uptake from floor via middle leg having removable

cover. Wire seperator for data provided in cable tray below fipper. The meeting table can be Convexed or Rectangular shaped as per the layout.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

18.0 Manufacturing, providing and placing in position machine made factory assembled Round Meeting Table of following dimensions with the following

specifications.

JOINT DIRECTOR ROOM Providing & Placing Meeting Table with following details and specifications :

Top is made of 25 mm thick Prelaminated Particle Board(E-1 Grade), finish with matching 2 mm PVC edge-banding and Melamine finish.

Understructure: MS understructure with Cone Leg epoxy powder 70-80 micron coated spray color, baked at temperature 200c, well supported with beams under

Wire management: Snake Wire Carrier to be provided for vertical movement of wires and power box to be given below aluminum flipper for switches.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

19.0 Manufacturing, providing and placing in position machine made factory assembled Confrence Table of following dimensions with the following specifications.

BOARD ROOM Providing & Placing Conference Table with following details and specifications :

Top is made 25 mm thick prelaminated E1 grade particle board covered with 12 mm thick acrylic solid surface having total thickness of 38 mm (+/- 2 mm).

Understructure: Molded ply of thickness 15 mm with laminate of selected colour.

Wire management: Completely concealed wiremanagement with Aluminium anodized flipper with soft closure, wiring tray & beams Made from MS sheet 2 mm.,

flange structure epoxy powder 70-80 micron coated spray color, baked at temperature 200c with vertical wire uptake from floor via middle leg having removable

cover. Wire seperator for data provided in cable tray below fipper. The meeting table can be Convexed or Rectangular shaped as per the layout.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

19.1 Rectangluar Shaped Table Size - 7600mm x1500X 740mm H Nos. 0 1 1 725,700.00 725700

20.0 Manufacturing, providing and placing in position machine made factory assembled Sofa

SOFA FOR CABIN Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti-termite paint of approved brand & manufacture to

ensure stability of the frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, sides & back with jute strips, with polyfill covered with

jute & finished with thick marking cloth before doing final finished with Leatherite have basic cost not less than 1200/- Pet Mt. Seat - 35-40Kg/cum density PU

Foam, 100mm thick, Back - 35Kg/cum density PU foam, 60mm thick, Sides (inside) - 35 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) -

32 Kgcum density PU foam, 25mm thick. Seat shall rest on SS square frame of size 25mm x 25mm supported on legs made from solid wood of height 225mm. All

SS work should be in grade 304. Base of sofa should be infilled with suitable woode sections so as to give proper support to the seat. Height of the base of sofa

shall be 200-250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved Leatherite of A grade of

desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. complete as directed by the Engineer in charge.

Product should be BIFMA gold rated SCSglobal certified for inhouse air qualit

20.1 3 seater sofa overall dimension - 1970mm W x 860mm D x 800mm H Nos. 1 15 16 88,500.00 1,416,000.00

20.2 2 seater sofa overall dimension - 1400mm W x 860mm D x 800mm H Nos. 11 4 15 73,160.00 1,097,400.00

20.3 1 seater sofa overall dimension - 820mm W x 860mm D x 800mm H Nos. 3 4 7 56,640.00 396,480.00

21.0 Manufacturing, providing and placing in position machine made factory assembled Sofa for Area of following dimensions with the following specifications.

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

SOFA FOR WAITING AREA Providing & Placing sofa, structure Pressed and molded wood, supported by particle board with metal spring additionally. Cushion is Molded high density foam

(Polyurethane Foam) and jacketed with fabric or vinyl or leather (optional) with stainless steel leg designed in "U" shape. The component specification shall be as

follows Seat - 40-45Kg/cum density PU Foam, 100mm thick, Back – 32 - 40Kg/cum density PU foam, 50mm thick, Sides (inside) - 32-40 Kg/cum density PU

Foam, 11mm thick Sides (outside) & back (back side) - 35-40 Kg cum density PU foam, 13mm thick. Seat shell rest on MS Powder Coated / Chrome Finish Legs

supported solid wooden section of height 50-220mm. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty

21.1 3 seater sofa overall dimension - 1970mm W x 860mm D x 800mm H Nos. 2 1 3 54,280.00 162,840.00

21.2 2 seater sofa overall dimension - 1400mm W x 860mm D x 800mm H Nos. 1 1 2 37,760.00 75,520.00

22.0 Manufacturing, providing and placing in position machine made factory assembled Center & Corner Table of following dimensions with the following

specifications.

TABLE FOR CABIN Providing and placing Center & Corner table made of Particle board Grade E-1(Environmental Friendly), thickness 25mm cover with Melamine finish and 2mm thk

PVC Edge banding. The understructure is made of 25mm thk particle board with 2mm thk PVC Edge banding in Melamine finish.

E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply

with (EN 120-1992).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality .

22.1 Centre table Size - 1200mm W x 600mm D x 365mm H Nos. 7 9 16 15,930.00 254880

22.2 Side table Size - 600mm W x 600mm D x 365mm H Nos. 5 11 16 12,390.00 198240

23.0 Manufacturing, providing and placing in position machine made factory assembled Center & Corner Table of following dimensions with the following

specifications.

TABLE FOR WAITING AREA Providing and placing Center & Corner table made of Particle board Grade E-1(Environmental Friendly), thickness 25mm cover with Melamine finish and 2mm thk

PVC Edge banding. The understructure is made of SS Chrome Base.

E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply

with (EN 120-1992).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality .

23.1 Centre table Size - 1200mm W x 600mm D x 365mm H Nos. 2 1 3 21,830.00 65490

23.2 Side table Size - 600mm W x 600mm D x 365mm H Nos. 3 1 4 17,110.00 68440

24.0 Manufacturing, providing and placing in position machine made factory assembled Cafe Table of following dimensions with the following specifications.

LUNCH ROOM Providing & Placing Canteen Table with following details and specifications :

Top is made of 25 mm thick Prelaminated Particle Board(E-1 Grade), finish with matching 2 mm PVC edge-banding and Melamine finish.

Understructure: MS understructure with square legs made up of 2mm thick metal of dimension 38mm x 38mm epoxy powder 70-80 micron coated spray color,

baked at temperature 200c, well supported with beams under table top.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

24.1 Rectangular Table of Size - 1500mm W x 750mm D x 740mm H Nos 10 0 10 30,149.00 301490

25.0 Manufacturing, providing and Placing Café Chair of following dimensions with the following specifications.

LUNCH ROOM -CHAIR Providing and placing in position Cafe chair of Size 400mm (W) x 500mm (D) x 830mm (H). Seat / Backrest is made of Polypropylene plastic (PP) injection in a Nos 40 0 40 10,030.00 401,200.00

specific design. The seat and back are made up injection molded high impact strength polypropylene polymer (PP) compound with indoor grade UV Resistance.

Base is made of Bended PP with chrome plated base.The understructure is made of SS Chrome. Product should be BIFMA gold rated SCSglobal certified for

inhouse air quality. Leveller are made of high impact strength polypropylene polymer compound with indoor grad UV Resistance and pressed fitted with tubular

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

26.0 Manufacturing, providing and placing in position machine made factory assembled High Table of following dimensions with the following specifications.

LUNCH ROOM -HIGH TABLE Table top is made of 25mm thick E-1 grade particle board with Melamine finish and the exposed edge of worktop secured with 2mm thick PVC edge banding tape

of approved colour. The understructure is made of MS Powder coated Pole based leg with supporting MS plate.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years warranty.

27.0 Rectangular Table of Size - 1200mm W x 750mm D x 1050hmm Nos 4 0 4 41,595.00 166,380.00

28.0 Manufacturing, providing and placing in position High Chair

LUNCH ROOM -HIGH STOOL Providing and fixing High chair of size: 480Wx 440Dx 990Hmm & seating Height is 760 mm. Lightly cushioned Seat & Understurcture are madeout of teak wood Nos 8 0 8 13,570.00 108,560.00

with melamine polish.

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

Digitally signed by SAKET

SCHEDULE OF WORKS FOR MODULAR FURNITURE -BOI

S. location SPECIFICATION UNIT 7th 8th TOTAL UNIT RATE AMOUNT INDICATIVE IMAGE

NO. Floor Floor

29.0 Manufacturing, providing and placing in position MHS

W/S AREA Providing & Placing Medium Height Planter Storage, Storage of height 900mm & planter boz height is 300Hmm. Body of storages made out 18 mm thick Particle

Board (E-1 Grade), melamine finishes with 2 mm PVC edge-banding. E1 grade laminate to be used which provide no urea formaldehyde emission and

formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should

comply with (EN 120-1992). Front of Medium height Storages should be made out of 16 mm thick Particle Board (E-1 Grade) melamine finishes with 2 mm PVC

edge-banding fitted with extruded aluminum handle, as per requirement. Top should be 25 mm thick Particle Board (E-1 Grade), melamine finishes with 2 mm

PVC edge-banding. Storages should be provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the hinged doors can be locked at

once. Door should be provided with Hinge-damping mechanism to enable soft closing of doors. Product should be BIFMA gold rated SCSglobal certified for inhouse

air quality and with 05 years warranty.

30.0 Manufacturing, providing and placing in position Cabins (LHS )

Cabins (LHS) Low Height Back Storage: Body of storages made out 18 mm thick (E1 Grade) Pre-Lam Partical Board with 0.4mm veneer. All shelves are adjustable.The storage

should have extruded aluminum handle/ recess handle , as per requirement. Storages should be provided with adjustable levelers. Door Lock should be of three-

way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-damping mechanism to enable soft closing of doors.

E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or=

8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1892).

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.

TOTAL (INR) 57,691,970.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade

Centre,Nauroji Nagar, New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 7,514.65 997,869.00

B WATER SUPPLY 789,473.00 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 1,151,271.00 23,000.00

D SPRINKLER PIPING & ACCESSORIES 2,512,124.00 376,712.00

Total Cost ( Carried Forward) in Rs. 5,857,963.65

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous china

single trap syphonic pattern having back inlet, supporting chair, wall

hung water closet complete with all internal fittings/ accessories and CP

brass flush bend (European type) water closet with seat and lid, with

1 MR C.P. brass hinges and rubber buffers, adapter, rubber joints fixed to

W.C., C.P. brass screwed washers including cutting and making good the

walls and floors wherever required and HDPE WC pan connector

including jointing with white cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat & lid

"Thermoset moulded ( bakelite ) IS 2548 Part I Each 8 27,825.00 222,600.00

Supply, installation, testing and commissioning of concealed cistern

including flush plate and all internal fittings/ accessories including

cutting and making good the walls and floors wherever required

complete in all respects. Each 8 12,461.00 99,688.00

Supply, installation, testing and commissioning of glazed vitreous china

wash basin with R.S. or C.I. brackets painted white, 32mm C.P. brass

3 MR waste of standard pattern , C.P brass wall flange 32 mm dia. C.P. brass

bottle trap and union 32 mm dia C.P. pipes to wall flange. complete

including cutting and making good the walls wherever required.

3.1 Undercounter wash basin Each 5 8,421.00 42,105.00

3.2 Table top wash basin Each 3 15,141.00 45,423.00

Providing & fixing vitreous chinaware urinal comprising Large flat back

wall hung urinal in glazed vitreous China urinal 15 mm electrically

operated solenoid valve with infra red sensor mounted in a box with SS

Cover. CP brass chromium plated flush piping from solenoid valve to

4 MR urinal terminated with a 15 mm screwed spreader 32 mm nominal bore

CP cast brass waste 32 mm nominal bore CP cast bottle trap with

extension pipe rubber adopter for waste connection, CP brass wall

For supply,installation,testing & commissioning of sanitary

fixtures(white colour) as per above details. Each 4 26,802.00 107,208.00

Supply, installation, testing and commissioning of 15mm C.P. brass

5 MR single hole wash basin mixer without popup waste system with 450mm

long copper pipes and brass nut Each 8 6,089.00 48,712.00

Providing & fixing toilet paper holding including cutting and making

good the walls. Each 8 1,588.00 12,704.00

Providing & fixing Horizontal liquid soap dispenser with stainless steel

7 MR lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P.

brass screws Each 8 619.00 4,952.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing beveled edge mirror 5.5mm thick of superior quality

plate glass complete with 6mm thick marine ply sheet ground fixed to

9 MR wooden cleats with CP brass screws and washerswith 40 mm wide teak

wood frame as per design including polishing

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long

PVC tube and wall hook CP brass wall flange Each 8 1,798.00 14,384.00

Providing & fixing, testing and commissioning of storage type electric

water heater with automatic thermostatic control electric element,

11 MR pressure release valve, brackets fixed to expansion fasteners with M.S.

nuts and bolts all complete including cutting and making good the walls

wherever required.

05 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 8 12,085.00 96,680.00

15 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 1 25,800.00 25,800.00

Providing & fixing wall mounted 25 mm dia Stainless steel coated grab

12 MR bar including cutting & making good the walls(size 450mm long) Each 8 951.00 7,608.00

Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of

approved quality. Each 8 1,605.00 12,840.00

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of Automatic

14 MR Fragrance Dispenser machine complete with refill can and 'C' size

battery (2 Nos) for operation fixed to wooden cleats with CP brass

Providing and fixing of stainless steel finish Paper Towel Dispenser

15 MR having capacity of 300-350 paper towels fixed to wooden cleats with

C.P. brass screws Each 8 5,556.00 44,448.00

Providing and fixing of wall mounted fully automatic hand dryer in SS/

black finish as per approval complete will all accessories. Each 8 5,903.00 47,224.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per

16 17.10 IS:13983 with C.I. brackets and stainless steel plug 40 mm, including

painting of fittings and brackets, cutting and making good the walls

wherever required :

17.10.1 Kitchen sink with drain board

Supply, installation, testing and commissioning of 15mm C.P. brass

single hole sink mixer complete. Each 1 12,000.00 12,000.00

Providing and fixing C.P. brass shower assembly comprising of shower

head and arm, diverter, spout and other equipment/ accessories

complete as per selection of client/ engineer-in-charge: (Total base Rate

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Detail of Sanitary fixture are for the information of the

i. Contractor,however model/makes of all sanitary fixtures shall be

selected by Architect/Interior designer/Project manager and the same

shall be binding for execution.

No additional fixing cost shall be paid for change in type of sanitary

Contractor to receive all the above mentioned items & store at place as

directed at site.

TOTAL CARRIED OVER TO SUMMARY 7,514.65 997,869.00

Digitally signed by SAKET

SUB HEAD B: WATER SUPPLY

SL. DSR Rate NS Rate NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty Amount

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

(CPVC) plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and testing of joints

complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.3 25 mm nominal outer dia pipes. Metre 160.00 401.55 64,248.00

18.7.4 32 mm nominal outer dia pipes. Metre 270.00 518.75 140,062.50

18.7.5 40 mm nominal outer dia pipes. Metre 40.00 702.95 28,118.00

18.7.6 50 mm nominal outer dia pipes. Metre 120.00 934.15 112,098.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

2 18.8 clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the the same including testing

of joints complete as per direction of engineer in charge.

Concealed work oncluding cutting chases and making good the

18.8.2 20 mm nominal outer dia pipes. Metre 320.00 537.60 172,032.00

18.8.3 25 mm nominal dia Pipes Metre 150.00 627.25 94,087.50

18.8.4 32 mm nominal dia Pipes Metre 200.00 739.30 147,860.00

Providing and fixing brass stop cock of approved quality

Digitally signed by SAKET

SUB HEAD B: WATER SUPPLY

SL. DSR Rate NS Rate NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty Amount

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

18.17.1 25 mm nominal bore Each 4.00 622.40 2,489.60

18.17.2 32 mm nominal bore Each 4.00 689.95 2,759.80

Providing and fixing C.P. bass angle valve for basin mixer and

5 18.53 geyser points of approved quality conforming to I.S:8931 a) 15

mm nominal bore.

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 10.00 121.90 1,219.00

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 789,473.00

Digitally signed by SAKET

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing cast iron trap of self cleansing design with cast

iron screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S

as per IS 3989.

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 300.00 1,151.90 345,570.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 250.00 1,186.00 296,500.00

Providing and fixing single equal plain junction of reqd. degree with

3 17.43 access door, insertion rubber washer 3mm thick, bolts and nuts

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 20.00 925.70 18,514.00

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 665.05 6,650.50

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 20.00 811.90 16,238.00

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 561.20 5,612.00

Digitally signed by SAKET

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing bend of required degree with access door,

insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 20.00 705.20 14,104.00

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 522.80 5,228.00

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 20.00 470.45 9,409.00

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 390.50 3,905.00

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 20.00 513.15 10,263.00

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 10.00 362.05 3,620.50

Providing and fixing MS holder bat clamps of approved design to

cast iron (spun) pipe embedded in and Including cement concrete

8 17.37 blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) including cost of

cutting holes and making good the walls etc.

Providing and fixing G.I. Pipes complete with G.I. Fittings and

clamps. including cutting and making good the walls etc.

Digitally signed by SAKET

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

18.10.4 32 mm nominal bore Metre 120.00 667.00 80,040.00

18.10.5 40 mm nominal bore Metre 20.00 811.90 16,238.00

18.10.6 50 mm nominal bore Metre 80.00 1,048.35 83,868.00

Painting G.I. Pipes and fittings with two coats of anticorrosive

bitumastic paint of approved quality

18.40.4 32 mm nominal bore Metre 120.00 22.20 2,664.00

18.40.5 40 mm nominal bore Metre 20.00 25.25 505.00

18.40.6 50 mm nominal bore Metre 80.00 30.50 2,440.00

Painting sand cast iron / centrifugally cast iron( spun) iron soil,

waste and vent pipes and fittings with paint of any colour such as

chocolate, grey or buff etc. over a coat of primer (of approval

quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 300.00 82.80 24,840.00

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 250.00 62.95 15,737.50

Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3 Nos.

13 NS G.I. Socket 32 & 40 welded G.I. pipe and dipped in hot bitumen

complete in all respect.

100 mm diameter pipe (Hopper ) Each 20.00 1,150.00 0.00 23,000.00

Providing lead caulked joints to sand cast iron/centrifugally

cast(spun) iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement

mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

Digitally signed by SAKET

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

16 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 20.00 1,032.40 20,648.00

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 1,151,271.00 23,000.00

Digitally signed by SAKET

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR/ NS DESCRIPTION OF ITEMS UNIT Qty

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

1 7.0 gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete as

Supplying, fixing, testing and commissioning of butterfly valve

of PN 1.6 rating with bronze/ gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required :

Providing and fixing ISI Marked of approved make Fire

4 NS Extinguishers complete with all accessories as per

manufacturer's specifications.

4.1 CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 8.00 13,091.00 104,728.00

4.2 Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 8.00 3,153.00 25,224.00

4.3 ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 30.00 2,796.00 83,880.00

Digitally signed by SAKET

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR/ NS DESCRIPTION OF ITEMS UNIT Qty

Providing, fixing, testing & commissioning of 15mm dia

5 NS quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories :

5.4 21.4 Concealed Sprinkler NOS. 490.00 1,397.00 684,530.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15 NPT

on reducer thread with maximum working pressure of 175 PSI

6 test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm

NPT male thread to sprinkler head (Outlet) 15mm NPT female

thread with reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Providing and fixing signages printed on photoluminescent

U1000 aluminium sheet of 1.0 mm (+ -10%) containing

lumigen II as base chemical, covered under UV stablized

7 NS coating and of appropriate size including fixing on wall, door, SQ INCH 5,400.00 18.00 97,200.00

ceiling etc. with proper clamps, hangers, cleats anchor

fasteners etc. complete in all respacts as diercted by Engineer-

Providing, jointing and testing of automaticaly operated

Halotron fire extinguishers(cap-5kg,temperature rating-

68degc,test pressure-30bar) complete with all

accessories/fittings.

TOTAL CARRIED TO SUMMARY 2,512,124.00 376,712.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji

Nagar, New Delhi

Summary of HVAC Works

S.No. Description of Works Amount (DSR, in Rs.)

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR -2022 NON- DSR

Sno. Description Units Qty Rate Amount Rate Amount

1 MR Replace AHU canvas connections Nos 4.00 6,160.00 24,640.00

Supply, Installation, Testing Balancing & Commissioning of

G.S.S square/ rectangular ducting complete with gaskets,

elbows, splitters, vanes, supports adjustable dampers, etc.

2 as per drawings and as required for dehumidified air

distribution of following thickness as per approved working

drawings and requirement .

Supply and fixing of external thermal insulation on supply

air ducts with 19mm thick chemically cross linked closed

cell polythene (XLPE) fire retardant grade insulation of

3 16.23.1 density not less than 30kg per cum in single layer with Sq.m 2,820.00 754.00 2,126,280.00

factory lamination of 30 micron aluminium foil or 19mm

thick insulation as per CPWD specifications

Suply, installation, testing and commissioning of GI volume

control duct damper complete with neoprene rubber

gaskets,nut,bolts,screws linkages,flanges etc. as per

Supplying, fixing, testing & commissioning of powder coated

extruded aluminium section supply air grills with aluminium

volume control dampers, as per specifications.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR -2022 NON- DSR

Sno. Description Units Qty Rate Amount Rate Amount

Supplying, & fixing, of powder coated extruded aluminium

section return air grills with louvers but without volume

control dampers, complete as per required.

Supplying, fixing, testing commissioning of supply air

7 16.17 diffusers of powder coated aluminium with aluminium Sq.m 135.00 12,184.00 1,644,840.00

volume control dampers. ( 23Nos of 600x600mm)

Supplying, fixing, testing, commissioning of return air

diffusers of powder coated aluminium.

Supplying, fixing Acoustic lining of supply air ducting

complete with G.I frame, tissue paper, 28G perforated al.

Sheet, 25mm thick 32kg/cu.m fibreglass insulation as per

CPWD specifications.

Supplying, fixing , testing and commissioning of fire

dampers in supply air duct/ main branch and return air path

as & where required of required sizes including control

wiring. The damper shall be motorised and spring return so

10 as to close the damper in the event of power failure

automatically and open the same in case of power being

restored .the spring return action shall be built mechanism

and not externally mounted . The damper shall also be

closed in the event of a fire signals complete as required as

per specifications .

b 16.20.2 Motorised Actuator No. 24.00 9,948.00 238,752.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR -2022 NON- DSR

Sno. Description Units Qty Rate Amount Rate Amount

Supplying, fixing, testing commissioning of Inline Fan of GI

Casing Circular / Rectangular Type with light weight

11 MR dynamic balanced GI Impeller, suitable forSingle Phase

Motor (Without Speed Regulator, Bird Screen and Louver)

for toilet/ dinning / pantry exhaust.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/ Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and

heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two

compressors for above 14 HP modules, microprocessor based Controller, top discharge

type condensing unit(s), with R410A Refrigerant, vibration isolators, with suitable

1.1 foundation etc. complete as required.The unit shall deliver the rated capacity at AHRI Per HP 80.00 16,415.00 1,313,200.00

Conditions and work even at 50°C ambient temperature without tripping.The unit shall

be suitable to work on 400V+/-10%, 3 Phase, 50Hz AC power supply.The unit shall be

filled with first charge of the refrigerant and ready for use as required.The COP at AHRI

conditions shall not be less than 3.1 and IEER not less than 6.5 .

2.0 INDOOR UNIT

Supply, installation, testing and commissioning of following minimum capacity 4-

wayflow VRV/ VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic

washable media pre-filter, fan section with low noise fan/ dynamically balanced blower,

multi speed motor, coil section with DX Copper coil, electronic expansion valve, outer

2 cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote

control etc., suitable for operation on single phase 230V±10%, 50 HzAC supply,

complete, as required. The unit shall have automatic force shut down provision in case

of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be

at air inl et conditions of 27 Degree CD Band 19 Degree CWB temperature.

4-Way Cassette type

Supply, installation, testing and commissioning of following minimum capacity VRV/ VRF

High wall type Indoor unit equipped with washable synthetic media pre-filter, fan

section with low noise fan/ dynamically balanced blower, multi speed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote

3 control, drain pan, necessary accessories etc., suitable for operation on 230V±10%,

50Hz, single phase AC supply, complete as required. The unit shall have automatic force

shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C

WB temperature.

3.0 REFRIGERANT PIPING

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen

testing of following nominal sizes of soft/hard drawn copper refrigerant piping for

VRV/VRFsystem, complete with fittings, with suitable adjustable ring type hanger

DSR 2019 supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular

VRF/VRV insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

3.1 5.1 34.9 mm O.D (wall Thickness-1.2 mm) (Insulation: 19 mm) Rmt 157.00 1,230.00 193,110.00

3.2 5.8 28.6 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 110.00 1,108.00 121,880.00

3.3 5.6 22.2 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 85.00 865.00 73,525.00

3.4 5.5 19.1 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 95.00 707.00 67,165.00

3.5 5.4 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) Rmt 80.00 588.00 47,040.00

Supplying and installing of following size of perforated hot dip galvanized G.I cable tray

with perforations not more than 17.5%, in convenient sections, joined with connectors,

suspended from ceiling with G.I suspenders including bolts and nuts, etc. for carrying

refrigerant pipe in outdoor application as required.

4.1 450 mm width x 62.5 mm depth x 2 mm thickness Rmt 70.00 1,142.00 79,940.00

4.2 225mm width x 50 mm depth x 1.6 mm thickness Rmt 110.00 735.00 80,850.00

5 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with fittings,

supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and accessories as

per specifications, drawings.

6 MR Imported fittings Y-joints and headers etc. Nos 35.00 4,393.00 153,755.00

7 Control & Trasmission Wiring

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in Mtr 750.00 165.81

suitable conduits between indoor and outdoor unit.

8 Timer for Split ac for Server Nos. 2.00 3,910.00 7,820.00

9 Precision air conditioner system (PAC) for server room

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

SITC of 3TR wall mounted high performance split type cooling unit suitable for Critical

Technology/Equipment room. Each unit shall facilitate installation in Small Areas, shall

feature robust design to run 24x7, Auto-Restart function, Monitoring with Unit-to-Unit

Communication and Ease of service.

Indoor section & outdoor section.

The Indoor unit shall comprise of Metallic Body construction with insulated side panels,

Evaporator Coil with Hydrophilic Coating, Backward Curve fan with EC motor, HDPE

Washable Filters, Expansion Valve, R407C/R410a Refrigerant, Corded Remote,

Microprocessor Controller, G4 Filter, Suction and Discharge piping, Internal power and

Control wiring, HP/LP Cutouts, Power and Control contactors and Other Electrical &

safety accessories. Outdoor cabinet consists of Compressor, Fan, motor and Condenser

coil. Return air conditions of 27deg.C/40% RH at a condensing temperature of 45

Dimension (H x W x D)[mm]: 1100 x 375 x 515 (Indoor unit)

Team Mode feature for unit control, synchronising the Multiple No. of units to work as

single system for all above units.

Fault Failure changeover, Cascading Effect & Sequencing of above Units

Low-side material and accessories

Hot gas line -Supply & fixing of Interconnecting Copper piping between indoor &

outdoor unit along with support, fitting, paint and accessories. Copper piping will be

duly insulated with in the AC space only.@25mtr per machine

Liquid line -Supply & fixing of Interconnecting Copper piping between indoor & outdoor

unit along with support, fitting, paint and accessories. Copper piping will be duly

insulated with in the AC space only.@25mtr per machine

Supply & fixing of Indoor & Outdoor unit stands duly painted with anti corrosive black

paint, vibration pads, nut & bolts and fixing accessories. @1no. per machine

Initial charge of R-407c refrigerant gas & oil. @12kg per machine

Supply and laying of Interconnecting FRLS copper cabling between indoor & outdoor

unit with fitting and accessories for compressor (5c x 2.5sqmm A) @25mtr per machine

Supply and laying of Interconnecting FRLS copper cabling between indoor & outdoor

unit with fitting and accessories w/o cable tray for control signal (6c x 0.5sqmm

flexible/A) @25mtr per machine

Supply & laying of Incoming FRLS Copper Cabling from Incoming Isolator to CRAC Unit

(5cx6sqmm) @10mtr per machine

Supply & laying of sequential cable of size 2c x0.5sqmm flexible @5mtr per machine

supply and laying of 10c x 1sqmm flexible cable from controller to indoor unit for HP,

LP, A1 , A2, blower fan alarm etc. information @20mtr per machine

Supply & laying of HDPE/PVC Condensate drain piping with insulation in building area

along with fitting and accessories. @10mtr per machine

2 inch GI cable tray for condensor cable and compressor cable @25mtr per machine

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

Complete 3Tr at 27+/-1 deg.C/40% RH (2working + 1standby) PAC system Job 3 1,332,335.00 3,997,005.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New

SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

MAIN PANEL & DISTRIBUTION BOARD Rs. 1,184,728 Rs. 307,386

CABELS / MAINS Rs. 1,229,456 Rs. 14,944

LIGHTING FIXTURES Rs. 4,614,924 Rs. -

WIRING FOR DATA AND VOICE OUTLETS Rs. 3,824,425 Rs. 3,437,200

CABLE TRAY.& RACE WAY. Rs. 4,428,585 Rs. 693,040

ACCESS CONTROL SYSTEM (Low side Works) Rs. 85,618 Rs. 153,600

FIRE ALARM & PA SYSTEM Rs. - Rs. 2,628,476

CCTV System (Low side Works) Rs. 206,416 Rs. 384,000

GRAND TOTAL Rs. 28,732,478

GRAND TOTAL Rs. 28,732,478

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

1 MAIN PANEL & DISTRIBUTION BOARD

1.1.1 Supply,installation,testing and commissing of 3phase and neutral 415V 4 wire free standing

floor mounted indoor MV panel made out of 14 SWG sheet after seven tank process and

painting with epoxy powder coating MV electrical panel shall be dust and vermin proof

,hinged and locable doors.The panel shall consist of suitable rating TPN bus bar at the rating

of 0.8A /SQMM Supported by DMC/SMC insulator and color coded with heat shrinkable

sleeves. Metering shall be provided as specified .The panel shall have short circuiting with

standing capacity of minimum 36KA and consist of the switch gear as mentioned below .The

panel shall got fabricated from manufacturer with CPRI test certificate .The panel shall be

mounted on U channel including supply and fixing of the same.(including Capacitor banks)

− 250 Amps 4P On Load change over switch. -1No.

− 250 Amps 4P 36KA MCCB. -1No.

− Spreaders-1Set.

− Extended Rotary Operating Mechanism.-1Set

− Digital V A F Meter with built in Selector Switch, CTs, CT shorting links, R/Y/B LED indicating

lamps and control SP MCBs.

Outgoing Section

− 63 Amps FP MCB_C curve -4Nos.

− 80 Amps FP MCCB -1No.

− 125Amps 4P25KA MCCB-3Nos.

− 8 Step Automatic Power Factor Correction Relay (Digital)_1 No

− 63 Amps TP MCB -3Nos.

− 32 Amps TP MCB -4No.

− 10 kVAR capacitor duty Contactor with 220 V AC Coil_3 Nos

− 5 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos

− ON / OFF LED Indicating Lamps _7Set

− Start / Stop Push Buttons_7Set

− A/M Selector Switch_1 No

− Control S/P MCB (2/4 A)_7 Nos

− Neutral Links_7 Nos

− Control Blocks_7 Nos

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

- Enclosure, 300A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal&

Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as SET 4.00 238,783.00 955,132.00

1.1.2 Supplying the following MCCBs in sheet steel enclosure. For Ups Input & Output

125A 4P MCCB in sheet steel enclosure surface mounted on the wall along with incoming &

a) outgoing Cable Box, suitable for Termination of Aluminium / Copper Cable. (For Ups Input ) No. 8.00 13,045.00 104,360.00

b) UPS Output panel

- 125 A 4P Onload changeover switch in sheet steel enclosure surface mounted on the wall

along with incoming & outgoing Cable Box, suitable for Termination of Aluminium / Copper

- Outgoing Section

- 80 Amps FP MCCB -3No.

- Spreaders-3Set.

- Extended Rotary Operating Mechanism.-3Set

Enclosure, 200A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal&

Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as SET 4.00 31,309.00 125,236.00

1.2 DISTRIBUTION BOARDS.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution

board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200

2.5 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but

without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,

2.15 residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

Total of Main Panel/ DB carried over to summary 1,184,728.00 307,386.00

3.0 CABELS / MAINS

Supply ,laying,testing and commissoning of 1100V grade armoured cable having sector /

circular shaped aluminium / copper conductor PVC insulated cores under ground PVC tape

wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed

confirming to IS: 1554, laid on wall or ceiling using GI clamps and spacers as per route

shown at site and further as directed by Engineer-in charge

a MR 185 Sq.mm 3 1/2 core Aluminium cable mtr. 200.00 2,833.00 566,600.00

b MR 35 Sq.mm 3 1/2 core Aluminium cable mtr. 200.00 686.00 137,200.00

c MR 1 6Sq.mm 4 core copper cable mtr. 200.00 503.00 100,600.00

d MR 25Sq.mm 4 core copper cable mtr. 200.00 612.00 122,400.00

e MR 4 Sq.mm 3 core Copper cable (For AC Units) mtr. 800.00 260.00 208,000.00

Supply & fixing of end termination for above mentioned cables including compressed type

3.1 brass glands, crimping type coper lugs, insulation tape etc. as 'required complete with

earthing of glands in following sizes

Total of Cables / Mains carried over to summary 1,229,456.00 14,944.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V

grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in &

including 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732

including all accessries such as junction boxes , conduit bends, elbows and ceiling rose , and

anodised GI switch box with modular switch ,modular plate and the box covered with front

a 1.3.3 One light point controlled by one 6A switch 252.00 1,845.00 464,940.00

Secondary light point controlled by same switch Per

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

4.2 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

4.3 1.3.3 Exhaust fan point including of ceiling rose near fan. 20.00 1,845.00 36,900.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated

copper conductor cable drawn through 25 dia MS conduit laid in surface/concealed over

4.4 1.4 false ceiling or in slab/wall chases including ,2way modular switches,modular plate ,suitable 8.00 1,981.00 15,848.00

GI box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 50.00 122.00 6,100.00

d 1.24.5 6 pin 15/16 A socket outlet Each 80.00 197.00 15,760.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

4.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 200.00 47.00 9,400.00

existing surface/ recessed steel/ PVC conduit as required.

Supplying and laying HDMI Cable with connector on both ends.

1.20 Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

4.10 including painting in case of surface conduit,or cutting the wall and making good the same

in case of recessed conduit as required

Supply and fixing of 3 nos. 6A socket with 6M modular GI box, base plate and cover plate

below worktop, along with 1no. 6A socket, 1 no. 6A switch and 1 no. 16A switch(for 3 nos.

sockets) in 4M modular GI box, base plate and cover plate above worktop complete as per

drawings and instructions of engineer in charge.

Total of Wiring carried over to summary 649,050.00 4,890,630.00

5 LIGHTING FIXTURES

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of

3600 lumen. The product should be SMD based and have non integral isolated driver with

2KV inbuilt surge protection. THD<10%, PF >0.9,Product should have life class of 50K

burning hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring

should have teflon coted multi strand wires and external wire should have PVC coated

multistrand wires.

SITC of 2'X2' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of

3600 lumen. The product should be SMD based and have non integral isolated driver with

2KV inbuilt surge protection. THD<10%, PF >0.9,Product should have life class of 50K

burning hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring

should have teflon coted multi strand wires and external wire should have PVC coated

multistrand wires.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

STIC of Recessed High Efficiency Round Led Downlight, Body made of Aluminium and Opal /

prismatic Diffuser with homogeneous light distribution and without hotspots, System power

15W, 230V with CRI>80, Dia 142X44H mm, Cut out Dia 136mm color temperature

3000K/4000K/5700K, IP20, IK04, operating voltage range 140-270Vac, operating

5.3 MR temperature -10° to 45°C, PF>0.95, THD<10%, product efficacy>110lm/W, SDCM<5, Nos. 235.00 2,056.00 483,160.00

L70B50@50000hrs, LED binning as per ANSI Bin C78.377A, 110° shall be luminaire beam

angle, drivers efficiency >86%, internal surge protection of >2.5kV, LED make - Bridgelux,

Seoul, Osram, Cree, The manufacturer shall provide LM79, LM80, TM21, Photoboilogical

safety as per IEC 62471, RoHS complaint, BIS both for fixture and drivers.

SITC of Extruded Aluminium suspended/ surface mounted 36Watt, 4000 lumen LED batten

with PC Diffuser and Spring Steel Clamps for Surface Mounting arrangement. Driver

5.4 MR THD<15%, PF >0.9,with 2KV inbuilt surge protection. Internal wiring should have teflon Nos. 12.00 2,402.00 28,824.00

coted multi strand wires and external wire should have PVC coated multistrand wires.

Supply, Installation, Testing and Commisioning of Suspended /surface/Recessed High

Efficiency 16-18W per meter Suspended LED Channel, Body made of Aluminium and Opal

Diffuser with homogeneous light distribution and without hotspots, System power , 40W,

230V, 2385X52X85H mm, Color Temperature 3000K/4000K/5700K, CRI>80, IP20, IK04,

operating voltage range 140-270Vac, operating temperature -10° to 45°C, PF>0.95,

THD<10%, product efficacy>110lm/W, SDCM<5, L70B50@50000hrs, LED binning as per ANSI

Bin C78.377A, 110° shall be luminaire beam angle, drivers efficiency >86%, internal surge

protection of >3.5kV, LED make - Bridgelux, Seoul, Osram, Cree, The manufacturer shall

provide LM79, LM80, TM21, Photoboilogical safety as per IEC 62471, RoHS complaint, BIS

both for fixture and drivers.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

Providing & Fixing Coverings (Ceiling & Wall) Made out of Polyester Kintted fabric Coated

with polyurethane (PU). The Fibric width 2m,3m,4.1m,&5.1m with Weight of 200gm/m^2.

thickness of 0.3mm. The appearance of fabric is Matl. smooth and uniform with blance color

and ligth transmission of 50%. The tear strength of fabric should be accordance to CH.

4.5daN; TR: 6.5 daN. The fire Railing should be accordance to B-S1, do. The febric should be

humidity ressistant and free of cercinogenic subtance (CMR) or volatile organic compounds

(VOC's). At lableing in accordance with the French decree no, 2011- 321, Oeko -Tex

standar100 certified. The fabric should be paintabe/printable with approved manufacturer

5.6 MR guidelines with 10-year manufacture guarantee. the Installation of fabric should be dry Sqm 24.00 12,315.00 295,560.00

installation 7done at room tamperature using CLIPSO PVC, ASB tension profiles P.CC/P-

C10QS/P-C11QS/P-CCB022/P-B1/P-CC1P. There are several lighting options available

including various LED options and fluorescent lighting. When Positioned properly. LED

Lighting modules provide an even light flow, casting no shadowns or hot spots. coverings

are used for a variety of aluminated applications, including but not limited to walls, ceiling,

lightboxs or wall frames. coverings can enhance your door with a variety of spacial effects

fiber optics or changinglights, or create a statement piece incorporating custom printing.

The cost of electrical cove light fixtures is included in the same.

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

connectors etc., as per the direction of the engineer In charge

Providing & Fixing of 7W - 10W cylindrical surface/ suspended light fixture having a

5.8 MR minimum of 630 lumens of dimensions - 35(L) x 20(w) x 20(h) mm as per the approval of the each 20.00 2,472.00 49,440.00

engineer In charge

SITC of 7W Recessed Fixed LED Spotlight, Body made of high grade di-cast Aluminium,

System Power 7W, 230V, CRI>80, Dia- 68mm X 65 H mm, cut out Dia 60mm color

temperature 3000K/4000K/5700K, Hi- Precision optics with Beam Angle 15°/24°/36°, IP20,

IK02, operating voltage range 140-270Vac, operating temperature -10° to 45°C, PF>0.95,

THD<10%, product efficacy>100lm/W, SDCM<5, L70B50@50000hrs, LED binning as per ANSI

Bin C78.377A, drivers efficiency >86%, internal surge protection of >2kV. The manufacturer

shall provide LM79, LM80, TM21, Photoboilogical safety as per IEC 62471, RoHS complaint,

BIS both for fixture and drivers.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

Total of Light Fixture carried over to summary 4,614,924.00 0.00

6 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-

III) complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on

surface including cutting chases in the walls/floors and making good the same complete as

Supplying and drawing of CAT 6A UTP cable, 4 pair LAN Cable in the existing surface/

recessed Steel/ PVC conduit as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI Box in

wall/furniture/floor complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet Each 400.00 148.00 59,200.00

7.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Single Faceplate, Single Port square plate having spring shuttered front

a access for preventing ingress of dust, dimension as per commercially available modular Nos. 300.00 101.00 30,300.00

office furniture.

Supply & Fixing of Dual Faceplate, Duplex Port (for data and for voice) or as required square

b. plate having spring shuttered front access for preventing ingress of dust, dimension as per Nos. 400.00 101.00 40,400.00

commercially available modular office furniture.

Supply, Installation, Testing & Commissioning of 6 core Armoured single Mode Fiber optic

cable, Central Lose Tube With Jelly Compound, Corrugated steel tape armoured, Heaving

1300 nm Wavelength in the existing surface/ recessed Steel/ PVC conduit etc. complete as

Supply ,laying ,installing , testing and commmissioning of the 50 pair multi core 0.61 mm

annealed copper conductor PVC insulated and PVC sheathed armoured telephone cables

7.7 generally conforming to ITD S/WS-11-C and IS 1554 part I direct in ground /surface and / or mtr. 300.00 454.00 136,200.00

in existing pipe as required and includig making terminal joints, complete as required.

Total of Data & Voice carried over to summary 3,824,425.00 3,437,200.00

8 CABLE TRAY.& RACE WAY.

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800, World Trade Centre,Nauroji Nagar, New Delhi

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated

out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with

providing of Anchor fastners and all necessary hardwares as required for fixing, including

cutting, bending, welding, drilling, bolting etc. as per design as required and painted with

one coat of primer and two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required

for fixing and including the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI

earth strips complete as per specifications, as required and as below.

8.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with

internal partition/compartmentized of the following sizes including providing removable 3

mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth

wire complete as required including floor supports, bends, access boxes, tap off boxes and

cross over as per specification and site requirement. (overhead / wall mounted recovery &

function boxes shall be 1.6 mm thick)

a) 300 mm wide x 38 mm deep raceway RM 495.00 2,476.00 1,225,620.00

b) 225 mm wide x 38 mm deep raceway RM 150.00 2,074.00 311,100.00

c) 150 mm wide x 38 mm deep raceway RM 675.00 1,490.00 1,005,750.00

d) 100 mm wide x 38 mm deep raceway RM 450.00 1,109.00 499,050.00

Providing and fixing 400 x 400 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 350 x 350 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Total of Raceway carried over to summary 4,428,585.00 693,040.00

Digitally signed by SAKET

Sr. No 2022. Description Unit Qty Unit Rate DSR Total amount

Sr. No 2022. Description Unit Qty Unit Rate DSR Total amount

7 IP BASED CCTV SYSTEM

Supply and fixing of following sizes of MS conduit along with accessories in

7.1 1.20 surface /recess including painting in case of surface conduit,or cutting the wall

and making good the same in case of recessed conduit as required

7.2 MR Supply and fixing of RJ45 Connector Nos. 56 Rs. 373 Rs. 20,888

Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45

face plate complete as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI

Box in wall/furniture/floor complete as required.

Supply & Fixing of Single Faceplate, Single Port square plate having spring

7.5 MR shuttered front access for preventing ingress of dust, dimension as per Nos. 56 Rs. 101 Rs. 5,656

commercially available modular office furniture.

Supplying and drawing of CAT 6A U/UTP cable, white jacket, 4 pair LAN Cable in

the existing surface/ recessed Steel/ PVC conduit as required.

TOTAL OF IP BASED CCTV SYSTEM CARRIED OVER TO SUMMARY Rs. Rs. 206,416 Rs. 384,000

Digitally signed by SAKET

Sr. NDSR Total

2022. Description Unit Qty Unit Rate DSR Total amount

2022. Description Unit Qty Unit Rate DSR Total amount

8 ESTIMATED COST FOR ACCESS CONTROL SYSTEM

Supply and fixing of following sizes of MS conduit along with accessories in

8.1 1.20 surface /recess including painting in case of surface conduit,or cutting the wall

and making good the same in case of recessed conduit as required

8.2 MR Supply and fixing of RJ45 Connector Nos. 23 Rs. 373 Rs. 8,579

Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45

face plate complete as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI

Box in wall/furniture/floor complete as required.

Supply & Fixing of Single Faceplate, Single Port square plate having spring

8.5 MR shuttered front access for preventing ingress of dust, dimension as per Nos. 23 Rs. 101 Rs. 2,323

commercially available modular office furniture.

Supplying and drawing of CAT 6A U/UTP cable, white jacket, 4 pair LAN Cable in

the existing surface/ recessed Steel/ PVC conduit as required.

TOTAL OF IP BASED CCTV SYSTEM CARRIED OVER TO SUMMARY Rs. Rs. 85,618 Rs. 153,600

Digitally signed by SAKET

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No 2022. Description Unit Qty Unit Rate Total amount Total amount

Sr. No 2022. Description Unit Qty Unit Rate Total amount Total amount

Supplying, installation, testing and commissioning of micro processor based intelligent addressable

main fire alarm panel, central processing unit with the following loop modules and capable of

supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and

loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events history log in the non volatile

1 17.2.1 memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The panel shall have facility to connect printer

to printout log and facility to have seamless integration with analog/digital voice evacuation system

(which is part of the schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus

over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as

5 17.2.16 Supplying, installation, testing & commissioning of addressable strobe complete as required. Pcs 18.00 3,367.00 60,606.00

6 17.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required. Pcs 18.00 3,270.00 58,860.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box

having two LED, metallic cover complete with all connections etc as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

1 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as RM 1,650.00 173.00 285,450.00

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3

1 17.3.1 player (including 6 zone button paging station) with seamless integration facility with main fire Pcs 2.00 126,411.00 252,822.00

alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms

operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in

ABS enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Digitally signed by SAKET

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No 2022. Description Unit Qty Unit Rate Total amount Total amount

Sr. No 2022. Description Unit Qty Unit Rate Total amount Total amount

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing

1 17.5.3 surface / recessed steel conduit of following pairs, cores and size including connections and

interconnections etc. as required.

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 1,300.00 54.00 70,200.00

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

2 1.20 including painting in case of surface conduit,or cutting the wall and making good the same in case

of recessed conduit as required

GRAND TOTAL Rs. 2,628,476.00

GRAND TOTAL Rs. 2,628,476.00

Digitally signed by SAKET

Name of Work: Interior and Fitout work for Bureau Of Immigration at J-700 & J-800,

World Trade Centre,Nauroji Nagar, New Delhi

BOQ - AUDIO VIDEO WORKS

1 33 SEATER BOARD ROOM 11,310,012.00

2 13 SEATER BOARD ROOM 5,903,724.00

3 09 SEATER BOARD ROOM 1,669,110.00

4 SD'S CHAMBER 1,669,110.00

Digitally signed by SAKET

Project - Bureau of Immigration (Boardroom 8F (25Pax))

Total Qty Rate

S. No. Function Tender Specifications

Supply, Installation, Testing & Commissioning of 2-way, Ceiling-mount loudspeaker. Frequency range - 65 Hz to 20 kHz, Rated RMS Power - 30Watts or better, Sensitivity-89 dB SPL or

better, Coverage Angle-110° conical or better, Maximum SPL Continuous/Peak-104dB/110dB or better, Rated Impedance - 8 Ohms. Transformer Tapping - 70V/100V(30, 15, 7.5watts) or

1.1 Ceiling Speakers nos 8 ₹ 56,994

better. Transducer - LF - 6.5-inch or better, HF- .86-inch or better coaxially mounted with LF, Material - Painted ABS polymer Baffle and Power coated steel grille or better. Safety rating -

UL1480, UL2043. Mounting rails and C-Ring for ceiling tile included.

Supply, Installation, Testing & Commissioning of Quad Channel Class-D amplifier. Per Channel Power 60W @8Ω/4Ω or better. Support for 70V/100V or more. Power Sharing or

Bridge/Parallel modes for better power distribution. Frequency Response- 20 Hz – 20 kHz or better. Signal to Noise ratio -> 103 dB or better, Input impedance - >10k, balanced or

1.2 Amplifier for Ceiling Speakers nos 1 ₹ 341,964

unbalanced or better, Front and Rear panel indicators for Power, signal (per channel), limit / mute / protect etc. or better. Better to have Remote standby and Power saving features -

Supply, Installation, Testing & Commissioning of Digital Signal Processor with minimum 16 Mic/Line inputs and 8 Line outputs. Shall support phantom power on each microphone input.

AEC channels - 16 or more with 200ms tail length. Minimum 8x8 Dante channels and support for up to 128x128 Network audio channels via Dante /AES67 or similar protocol. POTS and SIP

1.3 Digital Signal Processor Type Softphone integration for Audio conferencing. USB-B port supporting AV USB Bridging for software or web-based conferencing applications emulating USB Audio (Speakerphone) and USB nos 1 ₹ 1,289,150

Video (Camera) driver. 16x16 GPIO ports for Microphone look at me integration. 24 bit-A/D-D/A converters or better, 48 kHz Sample rate or better, Input frequency response of 20 Hz to

20 kHz or better, Input dynamic range > 109 or better.

Supply, Installation, Testing & Commissioning of Boudnary microphone with cardioid polar pattern. Should have Programmable Switch with LED indicator and Logic out for camera look at

1.4 Boundary Microphone me integration. Frequency response - 50Hz to 17kHz or better, Sensitivity --27.5 dBV/Pa or better. Maximum SPL - 116 dB or better. Equivalent Output Noise: 23 dB SPL or better. Signal- nos 13 ₹ 97,704

to-Noise Ratio - 71dB or better. Dynamic Range - 94dB or better.

Supply, Installation, Testing & Commissioning of Digital Dynamic Wireless Handheld microphone. Frequency Response : 20 to 20,000 Hz or better,Support upto 96 compatible channels or

1.5 Wireless Handheld Microphone Set better, Dynamic Range – 120dB or better, Polar Pattern - Cardioid, Frequency Auto Scan Functionality, Range – 300 ft or better, THD – <0.02% or better, Power Requirements - Li-Ion nos 2 ₹ 264,615

Rechargeable Battery, Battery Life - Should be 8 hours or more, Should include rechargeable battery and charging station.

2.1 Front Display/Videowall Supply, Installation, Testing and Comissioning of suitable 3x2 videowall of 55" displays. With standard accessories and suitable MS wall mounting bracket. nos 6 ₹ 257,830

Supply, Installation, Testing and Comissioning of 65" or larger LED display. Brightness -500nits or better, Resolution- 4K UHD or better, Viewing Angle (H/V) - 178/178 or better, Contrast

2.2 Side Displays Ratio - 4,000:1 or better, Ports - Minimum 2 x HDMI, 1 xDisplay port, 2xUSB, 1 x RJ45, 1xRS232 or more. Bluetooth and WiFi connectivity options. With standard accessories and suitable nos 2 ₹ 420,670

MS wall mounting bracket.

Supply, Installation, Testing and Comissioning of 21.5" or larger annotation monitor. Resolution- 1080p or better, Panel Type - Active-Matrix Liquid Crystal Display (TFT) or better,

2.3 Annotation Monitor nos 1 ₹ 339,250

Contrast - 1000:1 or better, Brightness - 1000:1 or better, Touch Technology - Capacitive finger touch & Electromagnetic pen, Accuracy - 0.25mm or better

VIDEO,SWITCHING & INTERFACE SYSTEM ₹0

3.1 Cable Manager for Table Supply, Installation, Testing & Commissioning of Cable Manager with 1xHDMI and 1xUSB-C (Video), 1xRJ45, 1xUSB-A, 2 x Power sockets or better. nos 3 ₹ 54,280

Supply, Installation, Testing & Commissioning of Wireless Presentation System. Simultaneous display of up to four presentation sources in a quad window, Supports multiple user

3.2 Wireless Presenter connections simultaneously, 1 HDMI or better output; 1 or better USB Port; 1 or better Analog Stereo Audio output port; 1920 X 1080 or better output resolution along with ethernet port. nos 1 ₹ 264,615

It should support Windows, Mac, iOS, and Android.

3.3 AvoverIP HDMI Video Encoder SITC of HDMI Transmitter over Cat 6 ( HDBaseT) up to 70m with Input 1 HDMI, Cat6 (HDBaseT) Output, 4K@60 4:4:4 support HDTV Compatible, HDCP 2.2 Compliant with CEC, IR and RS- nos 5 ₹ 74,635

232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as required

SITC of HDMI Receiver over Cat 6 ( HDBaseT) up to 70m with Input 1 Cat6 (HDBaseT), 1 HDMI Output, 1080p, 2K and 4K@60 4:4:4 support, HDTV Compatible, HDCP 2.2 Compliant with IR

3.4 AvoverIP HDMI Video Decoder nos 4 ₹ 74,635

and RS-232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as required.

Digitally signed by SAKET

Project - Bureau of Immigration (Boardroom 8F (25Pax))

Total Qty Rate

S. No. Function Tender Specifications

VIDEO CONFERENCE

Supply, Installation, Testing & Commissioning of 4K Network PTZ Conference camera with minimum 20x optical zoom & 60-degree horizontal coverage. Low Noise CMOS 4K image sensor

with User-configurable resolution and quality for IP streams (up to 1080p). HDMI resolutions up to 4K30 or better and SDI-3G resolution up to 1080p60 or better. Image rotation controls

4K Video Conference Camera -

4.1 to allow for inverted mounting using ceiling bracket. Minimum Illumination - 0.5 Lux @ (F1.8, AGC ON) or better, Horizontal Rotation Range - ±170°, Vertical Rotation Range - -30° to +90° nos 1 ₹ 868,480

or better, White Balance controls- Auto, indoor, outdoor, one-push, manual, specified color temperature or better. Camera should be able to transmit video via network to USB endpoint

connected for video conferencing. Power – PoE & AUX. Shall include wall mounting bracket included.

Supply, Installation, Testing & Commissioning of 4K Network PTZ Conference camera with minimum 12x optical zoom & 80-degree horizontal coverage. Low Noise CMOS 4K image sensor

with User-configurable resolution and quality for IP streams (up to 1080p). HDMI resolutions up to 4K30 or better and SDI-3G resolution up to 1080p60 or better. Image rotation controls

4.2 4K Video Conference Camera - Side to allow for inverted mounting using ceiling bracket. Minimum Illumination - 0.5 Lux @ (F1.8, AGC ON) or better, Horizontal Rotation Range - ±170°, Vertical Rotation Range - -30° to +90° nos 2 ₹ 705,640

or better, White Balance controls- Auto, indoor, outdoor, one-push, manual, specified color temperature or better. Camera should be able to transmit video via network to USB endpoint

connected for video conferencing. Power – PoE & AUX. Shall include wall mounting bracket included.

Supply, Installation, Testing & Commissioning of Hardware or Software based control system with required ports to control the devices mentioned in BOQ with perpetual licenses to

5.1 Control System nos 1 ₹ 135,700

connect Wall/Table mount touch screen controllers and iOS and Windows devices as wireless touch controller.

Supply, Installation, Testing & Commissioning of High Definition, Multi-touch Touch Screen Controller with 24-bit color display. Viewable Screen Dimensions (diagonal) – 7-inch, Resolution

5.2 Touch Controller - 1280 × 800, Brightness - 400 Nits, Aspect ratio – 16:10, Power – PoE, Mounting – Wall and Tabletop, Orientation - Vertical / horizontal. Configurable LEDs on both side. Ambient Light nos 1 ₹ 407,100

Sensor, Proximity Detection.

Supply, Installation, Testing & Commissioning of 30 port L3 Gigabit Network Switch, POE+ Ports -24 or better, PoE Budget - 300W or better, SFP Ports - 4 or more, Auto-LAG and Auto-

5.5 Network Switch trunk, Multicast support with IGMP V1/V2 or better, DSCP based QoS support, IPV4/IPV6 Support, Switching Capacity in Gigabits per Second, 1 Gbps Non-blocking ports, Rack mountable nos 1 ₹ 542,800

with standard accessories.

CABLE, CONNECTORS, ACCESSORIES

6.1 Equipment Rack Supply, Installation, Testing & Commissioning of 15U AV Equipment Rack with accessories. nos 1 ₹ 40,710

6.2 HDMI Cable Supply, Installation, Testing & Commissioning of 18Gbps 6-feet HDMI Cable. nos 12 ₹ 3,393

6.3 Speaker Cable Supply, Installation, Testing & Commissioning of 2 core 1.5 sqmm PVC Sheathed loudspeaker cable. nos 1 ₹ 40,710

6.4 Microphone Cable Supply, Installation, Testing & Commissioning of 2 core shielded balanced microphone cable. nos 1 ₹ 40,710

6.5 CAT6e Cables Supplying and drawing of CAT 6A UTP cable, 4 pair LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. rmt 300 ₹ 84

6.7 USB-C Cable Supply, Installation, Testing & Commissioning of 4" Hight speed USB C-C 3.2 Cables. 65W Power and Display Port Alt Mode video support. nos 4 ₹ 10,856

Digitally signed by SAKET

Project - Bureau of Immigration (Meeting 8F (13Pax))

Total Qty Rate Amount

S. No. Function Tender Specifications

Supply, Installation, Testing & Commissioning of 2-way, Ceiling-mount loudspeaker. Frequency range - 65 Hz to 20 kHz, Rated RMS Power - 30Watts or better,

Sensitivity-89 dB SPL or better, Coverage Angle-110° conical or better, Maximum SPL Continuous/Peak-104dB/110dB or better, Rated Impedance - 8 Ohms.

1.1 Ceiling Speakers nos 6 ₹ 56,994 ₹ 341,964

Transformer Tapping - 70V/100V(30, 15, 7.5watts) or better. Transducer - LF - 6.5-inch or better, HF- .86-inch or better coaxially mounted with LF, Material -

Painted ABS polymer Baffle and Power coated steel grille or better. Safety rating - UL1480, UL2043. Mounting rails and C-Ring for ceiling tile included.

Supply, Installation, Testing & Commissioning of Quad Channel Class-D amplifier. Per Channel Power 60W @8Ω/4Ω or better. Support for 70V/100V or more.

Power Sharing or Bridge/Parallel modes for better power distribution. Frequency Response- 20 Hz – 20 kHz or better. Signal to Noise ratio -> 103 dB or better,

1.2 Amplifier for Ceiling Speakers nos 1 ₹ 341,964 ₹ 341,964

Input impedance - >10k, balanced or unbalanced or better, Front and Rear panel indicators for Power, signal (per channel), limit / mute / protect etc. or better.

Better to have Remote standby and Power saving features - Auto-standby.

Supply, Installation, Testing & Commissioning of Digital Signal Processor with minimum 16 Mic/Line inputs and 8 Line outputs. Shall support phantom power on

each microphone input. AEC channels - 16 or more with 200ms tail length. Minimum 8x8 Dante channels and support for up to 128x128 Network audio channels

1.3 Digital Signal Processor Type via Dante /AES67 or similar protocol. POTS and SIP Softphone integration for Audio conferencing. USB-B port supporting AV USB Bridging for software or web- nos 1 ₹ 1,289,150 ₹ 1,289,150

based conferencing applications emulating USB Audio (Speakerphone) and USB Video (Camera) driver. 16x16 GPIO ports for Microphone look at me integration.

24 bit-A/D-D/A converters or better, 48 kHz Sample rate or better, Input frequency response of 20 Hz to 20 kHz or better, Input dynamic range > 109 or better.

Supply, Installation, Testing & Commissioning of Boudnary microphone with cardioid polar pattern. Should have Programmable Switch with LED indicator and

1.4 Boundary Microphone Logic out for camera look at me integration. Frequency response - 50Hz to 17kHz or better, Sensitivity --27.5 dBV/Pa or better. Maximum SPL - 116 dB or better. nos 7 ₹ 97,704 ₹ 683,928

Equivalent Output Noise: 23 dB SPL or better. Signal-to-Noise Ratio - 71dB or better. Dynamic Range - 94dB or better.

Supply, Installation, Testing and Comissioning of 65" or larger LED display. Brightness -500nits or better, Resolution- 4K UHD or better, Viewing Angle (H/V) -

2.1 Main Display 178/178 or better, Contrast Ratio - 4,000:1 or better, Ports - Minimum 2 x HDMI, 1 xDisplay port, 2xUSB, 1 x RJ45, 1xRS232 or more. Bluetooth and WiFi nos 1 ₹ 420,670 ₹ 420,670

connectivity options. With standard accessories and suitable MS wall mounting bracket.

VIDEO,SWITCHING & INTERFACE SYSTEM

3.1 Cable Manager for Table Supply, Installation, Testing & Commissioning of Cable Manager with 1xHDMI and 1xUSB-C (Video), 1xRJ45, 1xUSB-A, 2 x Power sockets or better. nos 2 ₹ 54,280 ₹ 108,560

Supply, Installation, Testing & Commissioning of Wireless Presentation System. Simultaneous display of up to four presentation sources in a quad window,

3.2 Wireless Presenter Supports multiple user connections simultaneously, 1 HDMI or better output; 1 or better USB Port; 1 or better Analog Stereo Audio output port; 1920 X 1080 or nos 1 ₹ 264,615 ₹ 264,615

better output resolution along with ethernet port. It should support Windows, Mac, iOS, and Android.

3.3 AvoverIP HDMI Video Encoder SITC of HDMI Transmitter over Cat 6 ( HDBaseT) up to 70m with Input 1 HDMI, Cat6 (HDBaseT) Output, 4K@60 4:4:4 support HDTV Compatible, HDCP 2.2 nos 3 ₹ 74,635 ₹ 223,905

Compliant with CEC, IR and RS-232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as required

SITC of HDMI Receiver over Cat 6 ( HDBaseT) up to 70m with Input 1 Cat6 (HDBaseT), 1 HDMI Output, 1080p, 2K and 4K@60 4:4:4 support, HDTV Compatible,

3.4 AvoverIP HDMI Video Decoder nos 1 ₹ 74,635 ₹ 74,635

HDCP 2.2 Compliant with IR and RS-232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as required.

Digitally signed by SAKET

Project - Bureau of Immigration (Meeting 8F (13Pax))

Total Qty Rate Amount

S. No. Function Tender Specifications

VIDEO CONFERENCE

Supply, Installation, Testing & Commissioning of 4K Network PTZ Conference camera with minimum 12x optical zoom & 80-degree horizontal coverage. Low Noise

CMOS 4K image sensor with User-configurable resolution and quality for IP streams (up to 1080p). HDMI resolutions up to 4K30 or better and SDI-3G resolution up

to 1080p60 or better. Image rotation controls to allow for inverted mounting using ceiling bracket. Minimum Illumination - 0.5 Lux @ (F1.8, AGC ON) or better,

4.1 4K Video Conference Camera - Main nos 1 ₹ 868,480 ₹ 868,480

Horizontal Rotation Range - ±170°, Vertical Rotation Range - -30° to +90° or better, White Balance controls- Auto, indoor, outdoor, one-push, manual, specified

color temperature or better. Camera should be able to transmit video via network to USB endpoint connected for video conferencing. Power – PoE & AUX. Shall

include wall mounting bracket included.

Supply, Installation, Testing & Commissioning of Hardware or Software based control system with required ports to control the devices mentioned in BOQ with

5.1 Control System nos 1 ₹ 135,700 ₹ 135,700

perpetual licenses to connect Wall/Table mount touch screen controllers and iOS and Windows devices as wireless touch controller.

Supply, Installation, Testing & Commissioning of High Definition, Multi-touch Touch Screen Controller with 24-bit color display. Viewable Screen Dimensions

5.2 Touch Controller (diagonal) – 7-inch, Resolution - 1280 × 800, Brightness - 400 Nits, Aspect ratio – 16:10, Power – PoE, Mounting – Wall and Tabletop, Orientation - Vertical / nos 1 ₹ 407,100 ₹ 407,100

horizontal. Configurable LEDs on both side. Ambient Light Sensor, Proximity Detection.

Supply, Installation, Testing & Commissioning of 30 port L3 Gigabit Network Switch, POE+ Ports -24 or better, PoE Budget - 300W or better, SFP Ports - 4 or more,

5.5 Network Switch Auto-LAG and Auto-trunk, Multicast support with IGMP V1/V2 or better, DSCP based QoS support, IPV4/IPV6 Support, Switching Capacity in Gigabits per Second, 1 nos 1 ₹ 542,800 ₹ 542,800

Gbps Non-blocking ports, Rack mountable with standard accessories.

CABLE, CONNECTORS, ACCESSORIES

6.1 Equipment Rack Supply, Installation, Testing & Commissioning of 12U AV Equipment Rack with accessories. nos 1 ₹ 40,710 ₹ 40,710

6.2 HDMI Cable Supply, Installation, Testing & Commissioning of 18Gbps 6-feet HDMI Cable. nos 6 ₹ 3,393 ₹ 20,355

6.3 Speaker Cable Supply, Installation, Testing & Commissioning of 2 core 1.5 sqmm PVC Sheathed loudspeaker cable. nos 1 ₹ 40,710 ₹ 40,710

6.4 Microphone Cable Supply, Installation, Testing & Commissioning of 2 core shielded balanced microphone cable. nos 1 ₹ 40,710 ₹ 40,710

Supplying and drawing of CAT 6A UTP cable, 4 pair LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

6.5 CAT6e Cables rmt 300 ₹ 84 ₹ 25,200

6.7 USB-C Cable Supply, Installation, Testing & Commissioning of 4" Hight speed USB C-C 3.2 Cables. 65W Power and Display Port Alt Mode video support. nos 3 ₹ 10,856 ₹ 32,568

Digitally signed by SAKET

Project - Bureau of Immigration (SD Room 8F )

unit Total Qty Rate Amount

S. No. Function Tender Specifications

AUDIO, VIDEO SYSTEM

Supply, Installation, Testing and Commissioning of 4K 110 degree ultra-wide angle ePTZ camera with auto-

1.1 All in One Video Conferending Bar framing and people tracking, integrated 4-element microphone array and built-in speaker with USB and nos 1 ₹ 895,620 ₹ 895,620

Bluetooth connectivity.

Supply, Installation, Testing and Comissioning of 65" or larger LED display. Brightness -500nits or better,

Resolution- 4K UHD or better, Viewing Angle (H/V) - 178/178 or better, Contrast Ratio - 4,000:1 or better,

Ports - Minimum 2 x HDMI, 1 xDisplay port, 2xUSB, 1 x RJ45, 1xRS232 or more. Bluetooth and WiFi

connectivity options. With standard accessories and suitable MS wall mounting bracket.

VIDEO,SWITCHING & INTERFACE SYSTEM

Supply, Installation, Testing & Commissioning of Cable Manager with 1xHDMI and 1xRJ45, 1xUSB-A, 2 x Power

3.1 Cable Manager for Table nos 1 ₹ 54,280 ₹ 54,280

sockets or better.

Supply, Installation, Testing & Commissioning of Wireless Presentation System. Simultaneous display of up to

four presentation sources in a quad window, Supports multiple user connections simultaneously, 1 HDMI or

3.2 Wireless Presenter nos 1 ₹ 264,615 ₹ 264,615

better output; 1 or better USB Port; 1 or better Analog Stereo Audio output port; 1920 X 1080 or better

output resolution along with ethernet port. It should support Windows, Mac, iOS, and Android.

CABLE, CONNECTORS, ACCESSORIES

4.1 Cable, Connector and Accessories Supply, Installation, Testing & Commissioning of required Cable, Connector and Accessories nos 1 ₹ 33,925 ₹ 33,925

Digitally signed by SAKET

Project - Bureau of Immigration (Meeting Room - 7F - 09Pax )

unit Total Qty Rate Amount

S. No. Function Tender Specifications

AUDIO, VIDEO SYSTEM

Supply, Installation, Testing and Commissioning of 4K 110 degree ultra-wide angle ePTZ camera with auto-

1.1 All in One Video Conferending Bar framing and people tracking, integrated 4-element microphone array and built-in speaker with USB and nos 1 ₹ 895,620 ₹ 895,620

Bluetooth connectivity.

Supply, Installation, Testing and Comissioning of 65" or larger LED display. Brightness -500nits or better,

Resolution- 4K UHD or better, Viewing Angle (H/V) - 178/178 or better, Contrast Ratio - 4,000:1 or better,

Ports - Minimum 2 x HDMI, 1 xDisplay port, 2xUSB, 1 x RJ45, 1xRS232 or more. Bluetooth and WiFi connectivity

options. With standard accessories and suitable MS wall mounting bracket.

VIDEO,SWITCHING & INTERFACE SYSTEM

Supply, Installation, Testing & Commissioning of Cable Manager with 1xHDMI and 1xRJ45, 1xUSB-A, 2 x Power

3.1 Cable Manager for Table nos 1 ₹ 54,280 ₹ 54,280

sockets or better.

Supply, Installation, Testing & Commissioning of Wireless Presentation System. Simultaneous display of up to

four presentation sources in a quad window, Supports multiple user connections simultaneously, 1 HDMI or

3.2 Wireless Presenter nos 1 ₹ 264,615 ₹ 264,615

better output; 1 or better USB Port; 1 or better Analog Stereo Audio output port; 1920 X 1080 or better output

resolution along with ethernet port. It should support Windows, Mac, iOS, and Android.

CABLE, CONNECTORS, ACCESSORIES

4.1 Cable, Connector and Accessories Supply, Installation, Testing & Commissioning of required Cable, Connector and Accessories nos 1 ₹ 33,925 ₹ 33,925

Digitally signed by SAKET