CERTAIN SPECIAL REPAIRS AT PORTHARAPUR UNDER GE BRICHGUNJ PORT BLAIR

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate dismantling) complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land all as directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.

Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and as directed.

Dismantling of CGI/PGI sheet in Roof covering complete all as specified and as directed.

Dismantling wrought iron (or) mild steel work of any description not other wise provided for complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid , beded and pointed inany mortar of (Any type of flooring)and and Removing Rubbish out side of the MD Land complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails and any thickness, fixed in any position complete all as specified and as directed.

Material and Labour for Reinforced cement concrete M-30 (Design mix) using 20mm graded stone aggregates as in Chajjas, fins and lintels and like that complete all as specified and as directed.

Use & waste of Form work to sides & soffits of lintels over 1.5m clear span, floor or roof beams, cantilevers, etc for fair finished flat surfaces of concrete complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L 25mm thick cement concrete type B-0 (12.5mm graded stone aggregate) as in RCC roof / Floor surface wfor level coarse complete all as specified and directed.

M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete all as specified and directed.

M & L for Dark coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 15mm thick 1:4, complete all as specified and as directed.

All as per item no 20 above, but on vertical surfaces except screeding including 10mm thick CM 1:3 as in backing coat of dado/Skirting complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L Glazed Ceramic Coloured tiles (600x300) x 10mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4 complete all as specified and as directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , of 75 mm thick finished fair and even, using extra cement complete all as specified and as directed

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases complete all as specified and as directed.

M&L Mirror polished kota stone Machine cut slab flooring 18-20mm thick over and incl 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and polishing complete all as specified and directed.

All as per item No 26 above but on vertical surfaces of wall such as dado/skirting riser of steps/nosing, pillars etc incl 10mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.

Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed.

Material & labour 2nd class hardwood plain, solidstraight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, all as specified and directed.

Supply and fixing of 2nd class softwood clean sawn boards or planks, of thickness 25mm and width n exc. 30 cm complete all as specified and as directed.

Supply and fix 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both face complete all as specified and as directed.

S & F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded Complete fixture and fittings all as specified and directed

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

M & L for rendering 5 mm thick in CM I:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for rendering 15mm thick in two coats on faces of brick work or concrete surfaces; first coat (rendering coat) of 10 mm thick in cement mortar 1: 6 and second coat (finishing coat) of 5 mm thick in cement mortar 1: 4 mixed with water proofing compound (water proofing compound to be measured separately as supply only) and finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement etc complete all as specified and directed.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe-410 (Gde E-250 ) Quality -B Wincluding distance pieces, cleats etc. complete all as specified and directed.

Providing and fixing SS railing of ht 0.2m at various locations with SS Pipes of grade 304 and top hand rail of 50mm dia 1.5mm thickness and fixed on square baluster of 20x20x1.5mm to be fixed at spacing not more than 1200mm fixed with MS bolts grouted in RCC members with epoxy chemical & fixed with 40x40mm square flange. (Incl: Cutting,welding,drilling holes in existing floor and welding ends on existing RCC columns.)

Providing and fixing SS railing of ht 1.0m at various locations with ss Pipes of grade 304 and top hand rail of 50mm dia 1.5mm thickness and fixed on square baluster of 48x48x1.5mm to be fixed at spacing not more than 1200mm and 3Nos horizontal members of 20mm dia 1.5 mm thick fixed with D button on baluster including bottom flange of 75x75mm complete all as specified & directed by engineer-in- charge.(Incl: cutting, welding,drilling holes in existing floor and welding ends on existing RCC columns.)

M & L for prepatring of new steel/ Iron surfaces of any description exc 10cm width or girth and applying two coats of synthatic enamel paint over one coat of redoxide primer complete all as specified and directed.

M & L for prepatring steel/ Iron Eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying two coats of synthatic enamel paint over one coat of Redoxide primer complete all as specified and directed.

M & L for prepatring existing steel/ Iron Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint two coats of synthatic enamel paint over one coat of Redoxide primer complete all specifiedcand directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

M & L for removing loose and broken concrete by chiseling / picking etc upto a depth of 80 to 100mm from columns, beams and similar structural members, cutting edges, clearing the dismantled portion with wire brushes etc., to remove dust, dirt and other foreign particles etc., and washing with clean water with pressure including necessary scaffolding and removal of debris to a distance n.exc 50m, complete all as specified and as directed.

M&L for non shrink, cementitous micro concrete mixed with 12.5mm graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 80 to 100 mm in surface of columns, beams, parapets and similar structural members including use and waste of water tight form work, complete all as specificed and as per directed.

M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufactures instruction to old concrete surfaces of columns, beams and similar structural members complete all as specified and as per directed. Make Nitobond EP of Fosroc or equivalent

M&L for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified. Make : Concure WB white of Fosroc.

M & L for Cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate ) as in levelling coarse and other works as in roof,kerb, copping , padding, etc complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of Brick / Concrete Surfaces of roof in CM (1:4), mixed with water proofing compound, finished even & smooth without using extra cement complete all as specified and directed. ( Note liquid water proofing compound measured separately).

M & L Water proofing treatment to roof , edges of roof, Chajja , Edges of Chajja & Top Facia ( Vertical or tapered portion) etc, in following portion sequence :- (i) Properly cleaning and drying the surface (ii) Applying priming method over cleaned surface, (III) Laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Keep minimum 100mm overlap laid on primed surfaces by sealed and bonded to the surfaces by torching Method, and Applying Two coats of alumunium painting on water proofing treatment complete all as specified and directed.

M&L for providing 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stonne aggregate as in sub base of flooring complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block glossy finished in grey cement with pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade , laid dry incl grounting with PCC 1:2:4 type B0 make straight line etc complete all as specified and directed. (colour shade & pattern shall be approved by the GE)

M&L for sand as in cushening layer below interlocking paver tiles well compacted to a true surface complete all as specified and directed.

M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.

M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered ceiling surfaces complete all as specified and directed.

M&L for Complete removal of existing treatment and preparing old surfaces for applying two coat of oil bound distemper on one coat of primer over a coat of primer and putty on walls complete all as specified and directed.

M&L for Complete removal of existing treatment and preparing old surfaces for applying two coat of oil bound distemper on one coat of primer over a coat of primer and putty on ceiling complete all as specified and directed.

M&L for preparation of new plastered surface of wall and Two coats of Acrylic exterior emulsion paint as in wall/facia/border complete including applying cement primer all as specified & directed. Make-ASIAN(APEX), BERGER (WEATHER COAT), SHALIMAR(XTRA PREMIUM)

Two coats of Acrylic exterior emulsion paint as in old wall/facia/border complete including after removal of existing treatment all as specified & directed. Make-ASIAN(APEX), BERGER (WEATHER COAT), SHALIMAR(XTRA PREMIUM)

Supply and fix in repair decorative type curtain rod aluminium alloy including anodised decorative brakets etc complete all as specified and as directed

Supply and fix in repair bracket decorative type brass chromium plated aluminium alloy anodised for 20mm dia curtain rod complete all as specified and as directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed

Supply and fix UPVC 25mm bore pipes of pressure rating 10 Kgf/Sqcm fixed with all fittings and fixed to walls and ceillings or laid in floors etc complete all as specified and as directed.

Supply and fix UPVC 20mm bore pipes of pressure rating 10 Kgf/Sqcm fixed with all fittings and fixed to walls and ceillings or laid in floors etc complete all as specified and as directed.

Cutting chases, pinning in , making good to facings for concealed water tubing and pointing in CM 1:3, cutting not exc 10 cm girth complete all as specified and as directed

S&F in Repair 2 Way Bib Cock Double handle with flange 15 mm bore cast copper alloy Chromium plated with wall flang, screwed down, screwed for pipes complete all as specified and as directed (Make:- Prayag Cat No -8312 or Equivalent)

Supply and fix in repairs Health Faucet with 1 metre long PVC tube and wall hook complete all as specified and as directed

Supply and fix in Repairs brass CP 15mm dia bore wall mixer 3-in-1 system with provision for both hand shower and over head complete with 115mm long bend pipe, connecting legs & wall flange (without) hand & overhead shower) complete all as specified and as directed . Make: Jaquar cat Part No.FLR-CHN-5281N or equivalent as approved by GE

S&F in Repair Brass Chromium Plated Shower Rose 125 mm size suitable for 15 mm bore pipes including shower arm of 45cm to 60cm Long complete all as specified and as directed

S&F in Repair StainLess Steel Soap Dish Tray complete all as specified and as directed Make - Jaquar Cat NO AQN 7731

S&F in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed.

S & F in repairs glass corner shelf, Cat No.1173 of Jaquar or equivalent, complete all as specified and as directed.

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed.

S&F in Repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets, 15mm dia PVC Connection & Flushing pipecomplete all as specified and as directed

S&F in repairs wash hand basin ovel type, vitreous china, of size 550x400mm fixed complete incl fixing the same in to granite slab complete including CP waist coupling , waste pipe, PVC Connection of twice on each WHB for Hot & cold all as specified and directed,cost of granite slab will be separatly in respective item of sch complete all as specified and as directed

Supply and fix in repairs brass CP 15mm dia bore Central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm cartridge size also available complete all as specified and as directed . Make: Jaquar cat Part No.FLR-CHR-5167NB or equivalent as approved by GE

Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed

S&F in Repair looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed

Supply and fix in repairs Angular Stop Cock with Wall Flange brass CP 15mm dia bore with cup and washer complete all as specified and as directed . Make: Jaquar cat Part No.CON-059KN or equivalent as approved by GE

Supply and fix in repair PVC acrylic coloured Cabinet with shutters,inbuilt mirror and shelves, best quality of approximate size 350mm x 450mm x 10mm complete all as specified and directed .

S&F in Repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls heights up to 6M complete all as specified and as directed

S&F in Repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls heights up to 6M complete all as specified and as directed

S&F in Repair 75mm dia PVC (SWR) Multi Floor Trap with Greating including jointing with solvent cement complete all as specified and as directed

S&F in Repair 75mm dia PVC (SWR) bend with any radius complete all as specified and as directed

S&F in repair 75 mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as specified and as directed

S&F in Repair 75mm dia PVC (SWR) Tee with single junction with any radius with wall access door complete all as specified and as directed

S&F in Repair 110mm dia PVC (SWR) bend with any radius complete all as specified and as directed

S&F in Repair 110mm dia PVC (SWR) Tee with single junction with any radius with wall access door complete all as specified and as directed

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes and removing /dismantling of old water tank complete all as specified and directed.

S & F 24 Inches (Maximum) Telescopic Drawer Channel Stainless Steel | Rust Free | 600mm Ball Bearing Soundless Office Table Drawer Slides Pack of 1 Set (2 pcs) complete all as specified and as directed

S&F 75mm size hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F aluminium composite panel sheet of 3mm to 4mm thick, fixed on aluminium frame work for door/ Window and Cup board works fitted with Rubber Cascade strips complete all as specified and as directed complete all as specified and as directed

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply & fix 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed .

Supply & fix 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed .

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice lamination fixed with aluminium beeding as in door panel complete all as specified and as directed

S&F aluminium fly proof mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm and fiexed with aluminium straps complete incl taking down complete all as specified and as directed

S&F Aluminium Die cast Body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed

S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed.

S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and as directed

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed

S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed

M&L for PCC 1: 5 :10 type E2 using 40mm graded aggregate oas in Mass concrete in sunken treatment complete all as specified and as directed

M&L for water proofing treatment to sunken surfaces of the slab in following sequences:- (a) Slope correction by using 1:2:4 (Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5 mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml /50 Kg cement of DR Fixit of Pidilite Industries Ltd or STP No 1 (liquid) of STP Ltd in proporation 200ml / 50 Kg cement or equivalent as per manufacturer instructions complete.

(b) PCC padding with cement concrete 1:1.5: 3 type A 0 (using 12.5 mm graded stone aggregate) 25mm thick with integral water proofing compound "Dr Fixit" manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete.

(c) Vertical sides plastered in CM 1:3, 15mm thick with WPC and 72 hours testing for water tightness by ponding of water complete.(Note :- WPC Measured Separately)

(d) Application of two coats proof coats black manufactured by M/S Dr fixit or equivalent as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hours complete.

Supply only Integral Water proofing Compound

Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, regulators, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover/Pre moulded PVC switch board for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for the following: - (a) One light point/Exhaust fan point controlled by one switch

(b) One fan point controlled by one switch and one regulator

(c) One 3 pin switch socket outlet point 5 amps on same board with other switches.

(d) One 3 pin switch socket outlet point 5 amps on independent board.

(e) One bell / buzzer point controlled by one bell push

All as per item at sl No.109 above but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm earth continuty conductor, complete all as specified and as directed.

Supply and fix switch piano flush type single pole one way 5 amps, complete all as specified and as directed.

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted.

Supply and fix switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed.

Supply and fix bell push single phase, 240 Volts, 50 Hz, complete all as specified and as directed.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed.

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed.

Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed.

Taking out and dismantling the burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the exhaust fan of size 300mm sweep motor with super enamelled copper winding wire of suitable SWG including varnishing, baking in oven and reassemling refixing at same/ required location, complete all as specified

S&F switch piano flush type single pole two way 15 amps, complete all as specified and as directed.

Supply and fix energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

All as per item at Item No.118 above but 2 ft 10 watt complete all as specified and as directed.

S&F 36W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

Supply and fix sheet metal enclosures Loadline distribution board TPN, 4 ways 415 volts, with 200 amps rated bus bar, with IP 42 protection and double door complete all as specified and as directed including taking down old MCB DBs complete including cutting chases pinning in making good to facings where required and pointing in cement mortar 1:3 ends of edges of landing,steps, cills sunsades,shelves,lintels,etc and cutting for concealed conduit wiring etc and making good,cutting not exc 10 cm girth in brick wall complete all as specified.

S&F in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP and 63 A current carrying capacity in the DB complete with connection testing and commissioning,complete all as as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

M & L for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 2.5 sqmmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories, complete all as specified and as directed. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 25 sq mm 4 core complete all as specified and directed

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for fabrication of MS busbar Chamber outdoor type of nominal dimension not less than 600 mm x 600 mm x 450 mm duly provided with 04 Nos aluminimum bus bar of size 200 Amp alongwith fixing one 4 Pole MCCB 160Amp weather/vermin proof with both way opening duly provided with neoprene rubber gasket on CRCA steel sheet encloser and one set of indicator switch (RYB) including dismantling of old Basbar Chamber and making connection /thimbles of all incoming and outgoing cables complete all as sepcified and directed

M&L, Earthing complete with Galvinised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to galvanised strip 32 x 6mm as earth lead by means of bolts, nuts, washers and check nuts made out of copper earth plate all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed.

M/S R R ENTERPRISES

M/s B S Engineering

P Babu

RPG AND COMPANY

Nirman Construction Company

DEEPAK AGENCIES

M/s Saina Enterprises