Repair Rennovation of Parks in Sector G H J K L M O in Bhumi Vikas Evam Grih Sthan Yojna No 1 Keshavpuram Kalyanpur Kanpur under Infrastructure Fund

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm).

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil.

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge. 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Embedding and fixing it with the wall For compund fencing on the top of boundary wall

Providing, supplying and installation of 3 Seater RCC/Cement Park Bench with back rest size(5feet X 2feet) of M-30 grade concrete mix and TMT 10mm dia bars as main reinforcement and 4mm dia as sttirrups as reinforcement and paint as per the instructions of engineer incharge and specification as per design and drawings including all connections required for completion

Providing, supply and installation of Mild Steel single slide and combined double swing etc complete .Play area-:15 * 15 feet ,No. of slide-standard fiber reinforced polymer witn wr matt finish 6mm thickness 1 nos single slide lenght10 feet. Swing- 2 seater with heavy duty bearing block Structure pipe-swing structure m.s isi mark 90mm b class pipes structure m.s isi mark 50mm Swing seat and chain-rubbrize seat with 6mm metal g.i. polish chain. Accessories -support ralling safty ralling. Painting-p.u. sprey uv paint Slide deck height 5 feet and swing pole height 7 feet from ground.instructions as per E/I.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25