GE/H-16/2021-22 WELCOME MAINT IN OFFRS MD ACCN OTHER MISC WORK INCLUDING VARNISH OF WOODEN FURNITURE AND CONNECTED E/M ITEMS AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT-10

Amount

M&L for preparation of old painted surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed by the Engineer-in-Charge.

All as per Ser item No 1 above but on ceiling surfaces

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by the Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by the Engr-in-Charge.

M&L for old decorated plastered surfaces of wall and applying one coat of oil emulsion distemper including preparation of surfaces complete all as specified and directed by the Engr-in-Charge.

All as per Ser item No 5 above but on ceiling surfaces

M&L for complete removal of old treatment on surfaces of walls through electrically operated grinder using sand paper for preparation of old decorated plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed by the Engr-in-Charge.

All as per Srl item No. 8 above but two coats on ceiling surfaces.

M&L for applying one coat of wall putty to old / new wall surfaces on one coat of priming surface exceeding 1.5mm thick of water proofing wall putty to obtain even and smooth finished surface with and including applying fine emery paper to remove application marks and for obtaining smooth surface, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in patches (patch area n. exc. 3 sqm each) on fair faces of brickwork / concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick ready mix plaster on brick or concrete surfaces of walls (external walls) finished even and smooth complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of wall putty to old / new wall surfaces on one coat of priming surface exceeding (first layer 1mm and subsequent layer 1.5mm thick of water proofing wall putty) to obtain even and smooth finished surface with and including applying fine emery paper to remove application marks and for obtaining smooth surface, complete all as specified and directed by Engr-in-Charge.

M&L for grinding and polishing of existing kota stone/terrazzo cast in situ floor & skirting at any floor by power grinding machine/manually operated machine to achieve required finish, cleaning the surfaces and applying bees wax polish and spreading wooden powder (burada) complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Taking up or down GI tubing and connections including cleaning for refixing or removing to store for 15mm bore complete all as specified and directed by Engr-in-Charge.

Cutting chasis in walls, floors, etc cutting n. exc. 10 cm in girth and making good, in case of concealed pipes water tubing and earth work and pipes laid in trenches where required and pointing in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

Fixing only 15 mm dia medium grade galvanised steel water tubing with all fittings fixed to wall or laid in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated tubular towel rails 20mm dia, D type 60 cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore pillar taps fancy type, CP brass with capasten heads, scewed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nut, screwed for iron pipes and fixed complete all as specified and directed by Engr-in-Charge.

S&F toughened glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair stop valve(concealed) CP brass ,15 mm dia, fancy type, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated shower roses with or without swivel joints, any size, including incl arm & fixing to steel pipe or union complete all as specified and as directed.

S&F in repair 15mm bore chromium plated bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC connection 600mm long with PTMT nuts complete all as specified and directed by Engr-in-Charge.

M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces, skirting, dado etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over 10mm thick rendering coat in CM (1:4) complete all as specified and directed by Engr-in-Charge.

S&F non skid ceremic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick screed bed and bedding layer of CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L in repair for 18mm to 20mm thick granite of any colour, table rubbed and polished jambs, pillars, wall lining (veenering to wall), window cills, platforms, etc using marble dust with admixture of pigment to match with shade of granite with necessary hanging arrangement ie.e stainless steel fastner with nut and bolt, etc laid over 10mm thick rendering coat in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for bedding layer of chemical adhesive of minimum 6mm thickness, after roughening of floor surfaces by picking, sweeping, cleaning and washing down with water and removal of dust, etc for laying floor tiles of any size/type, complete all as specified and directed by Engr-in-Charge.

M&L for Vitrified Ceramic coloured tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.36 sqm, but n. exc. 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over chemical adhesive complete all as specified and directed by Engr-in-Charge.

S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty n. exc. 0.5 sqm in each pane, including hacking out old broken glass from metal frame, complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples, complete all as specified and directed by Engr-in-Charge.

S&F in repair drapery rod, aluminium body, wooden finish decorative type heavy duty with side caps and wooden rings, brackets, etc duly fixed with rawl plug by drilling etc complete all as specified and directed by Engr-in-Charge.

S&F wash hand basins vitreous china flat back 550x400mm size white, first quality, with and including CP waste grating 32mm size, PVC waste pipe 25mm bore heavy duty, chain and plug and porcelain stopper , brackets of MS angle 35x35x6mm size complete all as specified and directed by the Engineer in Charge .

M&L providing vitreous china ware squatt pan, Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding, fIxed in repair complete all as specified and directed by Engr-in-Charge.

M&L vitreous china water closet Padestal pattern white fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F in repair 10 litres capacity, PVC valveless with syphonc action type flushing cistern low level white with inlet, ball valve float, incl bracket, flush pipe fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair seat covers any colour for pedestal pan with hinges complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP grating 125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed by Engr-in-Charge.

M&L for disconnecting existing tanks, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of capacity exc 250 ltrs but n. exc. 500 ltrs and hoisted, if required reconnecting and re-fixing in position complete all as specified and directed by Engr-in-Charge.

All as per Srl No 42 here-in-before but capacity of tank exc. 500 ltrs but n. exc. 1000 ltrs.

S&F in repair 20 mm bore PTMT ball valve high pressure with polylethylene float ball and fly nut complete screwed for iron pipe and fixed 20mm bore, complete all as specified and directed by Engr-in-Charge.

S&F over head water tank cover for tank capacity 500 litr with fixing bracket and screw complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 45 here-in-before but tank capacity exc 500 ltr but n.exc 1000 ltrs complete all as specified and directed by Engr-in-Charge.

S&F in repair kitchen plate rack of size 33”x31”x10” made out of 1mm thick stainless steel complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints fixed in floors complete all as specified and directed by Engr-in-Charge.

S&F in repair 100mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F in repair 100mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints fixed in floors etc complete all as specified and directed by Engr-in-Charge.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipe complete all as specified and directed by Engr-in-Charge.

All as per item No 52 here-in-before but for 100mm dia pipe

Taking down chowkats or frames with shutters ( without taking of shutters from the frame area exc 1.50 sqm but n.exc. 4 sqm including making holes as required for receiving PCC and to match with the existing surface complete all as specified and directed by Engr-in-Charge.

-ditto- as per Srl item No 54 here-in-before but n. exc. 1.50 sqm complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for door with one or more rebates including necessary fixing lugs hunges, lock strike plate, etc complete all as spd size of frame 105x60mm complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for door with one or more rebates including necessary fixing lugs hunges, lock strike plate, etc complete all as spd size of frame 125x60mm complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick flush shutter solid core construction with block board and plywood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick plain factory made framed panelled shutter (two panel ) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces . size of rail and stile as per IS 1003(Part I) , kiln seasoned and chemically treated rail and style shall be 2nd class hardwood complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick factory made glazed and skelton shutters, open rebated and prepared to receive glass gauze (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze , etc size of shutters as specified in SSR part I , section 8, clause 8.20(a) Ist class soft wood complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as specification and drawing in SSR complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick ( style) consulting of frame MS tubes fro top or bottom rails MS frame shall be covered with heat moulded plain clour PVC 'C' channel having a PVC sheet strips of 20mm with stick in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on other side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded sealed to bve sides and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing in SSR complete all as specified and directed by Engr-in-Charge.

M&L for PCC type C1 1:3:6 ( 20mm graded aggregate ) as in PCC bed block complete all as specified and directed by Engr-in-Charge.

S&F MS hold fasts, wall ties, and conforming to Fe-290 Gde E 165 complete all as specified and directed by Engr-in-Charge.

S&F 100 mm butt hinges, extruded alum alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engr-in-Charge.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 250mm size aluminium alloy anodised sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F 150mm size aluminium handles, cast type anodised complete all as specified and directed by Engr-in-Charge. Make:Classic/Argent or equivalent.

S&F in repairs for 100mm long Aluminium barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F in repairs 140mm floor door stoppers of aluminium alloy body and tounge, anodised with hard drawn steel springs, fixed in floors complete all as specified and directed by Engr-in-Charge.

S&F in repairs aluminium (Extruded section body) door closer hydraulically regulated, designation No 2, Universal type, suitable for door shutter of 701mm to 850mm in width and weight between 36 to 60 Kg and fixed complete all as specified and directed by Engr-in-Charge.

R D ENTERPRISES

SAWARIYA ENGINEERS AND CONTRACTORS

ACR ENTERPRISES

L G BUILDERS

LAXMI GROUP

SNOWY ENGINEERING INC

SETHI ENTERPRISES