Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.6 LAccepted-AOC 23 A MORAR ENCLAVE GOLA KA MANDIR MORAR GWALIOR MP 474005 | GWALIOR | GWALIOR | MP | 474005 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹58.2 L+₹6.7 L (13.0%)Rejected-Finance 840 1B MADHUR VIHAR COLONY CIVIL LINES JHANSI UP 284 001 | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹59.9 L+₹8.3 L (16.1%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹61.9 L+₹10.3 L (20.0%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹84.3 L+₹32.7 L (63.5%)Rejected-Finance 84 A VIJAY NAGAR COLONY LALGHATI PO NAYAPURA BHOPAL 462032 | 462032 | L5 | Rejected-Finance Not lowest bidder |
| Sl No | Description | Qty | Unit | M/S Kumar Contractors L2 | anand enterprises L6 | M/s Sagar Construction L4 | M/S Rajeev Construction L1 | M/s Sohanil Construction L9 | Maa Durga Electricals L7 | Allied Agencies L3 | POONAM ELECTRIC INDUSTRY L5 | Lamba Enterprises L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Attending daily complaints of Gwalior Mil area by deputing adequate number of Skilled teams of qualified Electrician and helper (including saftey equiments gloves and helmet) any time of the day for repair / tightening of end terminals of street light fitting, flood light, LED strip on poles ,High Mast light,Post top lanten of any size/capacity at any height and repair the street lights, Flood lights and Post Top lanten having minor faults i.e loose connections, carbon deposition ,replace the u/s driver of street lights, Shifting and refixing the same etc and make the light functional.
Note:-
(i) Complaint shall be done within 24 hrs after intimation by JE E&M Engineer-in-Charge failling which penalty of Rs 250 per day per complaint will be levied on contractor (Complaint slip shall be part of the bill).
(ii) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge.)
(iii) This item pertains to attending complaints of street light/flood light/LED strips on poles/High mast, MCB, & timer panel including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge.
(iv) Cost of LED driver of street lights shall be measured separetly under BOQ Sch 'A'. | 1,010 | Each Job | 170 ₹1,71,700 | 80 ₹80,800 Lowest | 160 ₹1,61,600 | 120 ₹1,21,200 | 95 ₹95,950 | 1,450 ₹14,64,500 | 180 ₹1,81,800 | 90 ₹90,900 | 800 ₹8,08,000 |
| 2.00 | Material and labour for overhauling of existing 16 meters height high mast lighting system by degreasing and cleaning of double drum winch, gear box, wire rope, clamp, bobbin arrangement, power tool motor, mechanical torque limiter, lowering the mast head assembly, degreasing and cleaning the pulley, docking arm etc and applying new grease / lubricating oil for all mechanical moving / rotating parts, checking all the electrical parts such as timer panel, all cable connections in control panel, motor, junction box, flood light fittings & aviation obstruction light fitting etc, rectifying the defects, renewing the defective components etc including testing for proper functioning complete all as specified and directed by Engineer-in-Charge. Note: The cost of minor spare parts & lubrication is deemed to be included in the quoted rate. | 2 | Each Job | 10,000 ₹20,000 | 2,000 ₹4,000 Lowest | 7,000 ₹14,000 | 7,500 ₹15,000 | 45,555 ₹91,110 | 15,000 ₹30,000 | 3,000 ₹6,000 | 5,400 ₹10,800 | 15,000 ₹30,000 |
| 3.00 | Supply and fix in replacement of 120 Watt LED flood light( Red,Green and Worm White colour) fitting made up of Pressure die-cast aluminium alloy housing with toughened glass, IP65 protection and impact resistance of IK07 and individual high power LEDs with secondary optics having system lumen efficacy ≥100 lm/W, Inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS complying including surface mounting using adjustable MS cradle of thickness 5 mm provided with the fixture including taking down existing unserviceable flood light fitting of any description complete all as specified and directed by Engineer-in-Charge.
Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge. | 50 | Each | 3,500 ₹1,75,000 | 4,200 ₹2,10,000 | 3,400 ₹1,70,000 | 2,750 ₹1,37,500 Lowest | 4,725 ₹2,36,250 | 4,500 ₹2,25,000 | 4,500 ₹2,25,000 | 3,060 ₹1,53,000 | 4,550 ₹2,27,500 |
| 4.00 | M&L for GI Brackets bending & shaping of size 32/40 mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary 02 Nos clamps, brackets and bolts etc to fixing on tublar/RCC pole including taking down old u/s GI brackets. | 185 | Each | 320 ₹59,200 | 400 ₹74,000 | 220 ₹40,700 | 250 ₹46,250 | 125 ₹23,125 Lowest | 648 ₹1,19,880 | 200 ₹37,000 | 630 ₹1,16,550 | 450 ₹83,250 |
| 5.00 | Supply only as per Sch 'A' (Item No. 1.00) LED drivers for LED Street light fittings of 60/70/90 watt suitable for Havells, Wipro Hallonix ,Crompton & surya LED Street light fittings complete all as specified and directed by Engr-in-charge. | 300 | Each | 220 ₹66,000 | 300 ₹90,000 | 200 ₹60,000 | 110 ₹33,000 Lowest | 455 ₹1,36,500 | 650 ₹1,95,000 | 350 ₹1,05,000 | 900 ₹2,70,000 | 800 ₹2,40,000 |
| 6.00 | Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light. | 148 | Each | 3,000 ₹4,44,000 | 2,300 ₹3,40,400 Lowest | 2,700 ₹3,99,600 | 2,500 ₹3,70,000 | 3,455 ₹5,11,340 | 3,250 ₹4,81,000 | 2,800 ₹4,14,400 | 2,700 ₹3,99,600 | 3,250 ₹4,81,000 |
| 7.00 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light complete. | 170 | Each | 2,350 ₹3,99,500 | 2,500 ₹4,25,000 | 2,200 ₹3,74,000 | 2,000 ₹3,40,000 | 2,995 ₹5,09,150 | 2,450 ₹4,16,500 | 1,900 ₹3,23,000 Lowest | 2,070 ₹3,51,900 | 3,200 ₹5,44,000 |
| 8.00 | Supply and fixing LED street light fitting 100 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light. | 129 | Each | 3,300 ₹4,25,700 | 2,700 ₹3,48,300 Lowest | 3,100 ₹3,99,900 | 2,800 ₹3,61,200 | 3,995 ₹5,15,355 | 2,850 ₹3,67,650 | 3,100 ₹3,99,900 | 3,060 ₹3,94,740 | 4,250 ₹5,48,250 |
| 9.00 | Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light. | 75 | Each | 3,800 ₹2,85,000 | 3,000 ₹2,25,000 Lowest | 3,500 ₹2,62,500 | 3,000 ₹2,25,000 Lowest | 4,725 ₹3,54,375 | 4,500 ₹3,37,500 | 3,500 ₹2,62,500 | 3,150 ₹2,36,250 | 5,450 ₹4,08,750 |
| 10.00 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including taking down old u/s light complete. | 85 | Each | 2,800 ₹2,38,000 | 3,500 ₹2,97,500 | 2,600 ₹2,21,000 | 2,200 ₹1,87,000 Lowest | 3,475 ₹2,95,375 | 2,450 ₹2,08,250 | 2,500 ₹2,12,500 | 4,050 ₹3,44,250 | 3,200 ₹2,72,000 |
Tender Value
₹1.2 Cr
EMD Value
₹2.0 L
Closing Date
8 Dec 2025, 6:00 pmClosed
SHRI ANIL KUMAR, IDSE, SE, CWE
HQ CWE JHANSI
REPAIR/MAINT OF PERIMETER SECURITY LIGHTS, STREET LIGHT, PATH AND GATE LIGHT CABLES AND POLE PAINTING AT DIFFERENT LOCATIONS UNDER GE GWALIOR
2025_MES_738582_1
CWE/JHA/GWL/TOKEN/61 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GWALIOR
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹1,000
GE GWALIOR
₹2.0 L
Yes
5 Jan 2026
6 Nov 2025
10 Dec 2025
6 Nov 2025
8 Dec 2025
29 Nov 2025
Amount
Attending daily complaints of Gwalior Mil area by deputing adequate number of Skilled teams of qualified Electrician and helper (including saftey equiments gloves and helmet) any time of the day for repair / tightening of end terminals of street light fitting, flood light, LED strip on poles ,High Mast light,Post top lanten of any size/capacity at any height and repair the street lights, Flood lights and Post Top lanten having minor faults i.e loose connections, carbon deposition ,replace the u/s driver of street lights, Shifting and refixing the same etc and make the light functional. Note:- (i) Complaint shall be done within 24 hrs after intimation by JE E&M Engineer-in-Charge failling which penalty of Rs 250 per day per complaint will be levied on contractor (Complaint slip shall be part of the bill). (ii) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge.) (iii) This item pertains to attending complaints of street light/flood light/LED strips on poles/High mast, MCB, & timer panel including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge. (iv) Cost of LED driver of street lights shall be measured separetly under BOQ Sch 'A'.
Material and labour for overhauling of existing 16 meters height high mast lighting system by degreasing and cleaning of double drum winch, gear box, wire rope, clamp, bobbin arrangement, power tool motor, mechanical torque limiter, lowering the mast head assembly, degreasing and cleaning the pulley, docking arm etc and applying new grease / lubricating oil for all mechanical moving / rotating parts, checking all the electrical parts such as timer panel, all cable connections in control panel, motor, junction box, flood light fittings & aviation obstruction light fitting etc, rectifying the defects, renewing the defective components etc including testing for proper functioning complete all as specified and directed by Engineer-in-Charge. Note: The cost of minor spare parts & lubrication is deemed to be included in the quoted rate.
Supply and fix in replacement of 120 Watt LED flood light( Red,Green and Worm White colour) fitting made up of Pressure die-cast aluminium alloy housing with toughened glass, IP65 protection and impact resistance of IK07 and individual high power LEDs with secondary optics having system lumen efficacy ≥100 lm/W, Inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS complying including surface mounting using adjustable MS cradle of thickness 5 mm provided with the fixture including taking down existing unserviceable flood light fitting of any description complete all as specified and directed by Engineer-in-Charge. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge.
M&L for GI Brackets bending & shaping of size 32/40 mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary 02 Nos clamps, brackets and bolts etc to fixing on tublar/RCC pole including taking down old u/s GI brackets.
Supply only as per Sch 'A' (Item No. 1.00) LED drivers for LED Street light fittings of 60/70/90 watt suitable for Havells, Wipro Hallonix ,Crompton & surya LED Street light fittings complete all as specified and directed by Engr-in-charge.
Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light.
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light complete.
Supply and fixing LED street light fitting 100 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light.
Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection including taking down old u/s light.
Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including taking down old u/s light complete.
Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including taking down old u/s light complete.
Supply and fix in replacement of Integral LED aviation light fitting comprising of aluminium housing with polycarbonate enclosure including taking down existing unserviceable aviation light of any description complete all as specified and directed by Engineer-in-Charge.
S&F outdoor type Photo Sensitive smart sensor with automatic switch-ON and switch-OFF operation based on ambient lux levels with voltage 220-240V,Rated currrent : 6-10 Amp and Ambient light <5-15 Lux complete & wired with all accessories IP65/IP66.
S&F Weather Proof PVC Junction Box with bus bar of capacity 40 Amp including one SPN MCB of 20 Amp Capacity,Clamps,Nut Bolts etc complete.
S&F LED Tricolor (Orange/White/Green) 3 in 1 Tiranga Single Strip Light with 18 Meter length,LED Decorative Pole Lighting Etc-Pack of 1,IP 65 rating withstand harsh weather poof complete all as specified and directed by Engr in charge.
Supply and fixing Tiranga ( 20 W ) Tube light, 4 Feet 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size for connection complete.
Supply, fixing, installation & testing of All-in-one integrated solar street light with built in 36/40 Watt LED light including galvanised steel pole medium grade, Mono Crystalline SPV Panel, Lithium Ferro Phosphate (LiFeP04) battery, MPPT charge Controller and PIR sensor with colour temperature 6000-6500K complete all as specified and directed by Engineer-in-Charge.
Material and labour for two coat of white samosam on LT/HT PCC pole including two coat of black paint on all steel surfaces such as channels, angles, clamps, nuts, bolts and washers of any description and writing the pole number in white colour on black background at a suitable place on the pole including applying two coat of samosam on PCC coping of pole complete all as specified and directed by Engineer-in-Charge.
Supply and laying PVC cable along with earth wire with the size of 2x1.5 sq. mm +1x1.5 sq. mm earth wire of FR is PVC insulated aluminium conductor, three core cable as required complete.
Supply and laying or fixing wiring along with earth wire with the size of 2x1.5 sq. mm +1x1.5 sq. mm earth wire 1100 volts grade heavy duty cable with PVC insulated Auminium conductor, three core cable in conduit pipe as required as specified and directed.
Supply and laying or fixing or passing through pipe,1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 10 sqmm nominal cross section complete including taking out u/s cable all as specified and directed by Engr-in-charge.
Supply and fix in replacement of LED Post top light fitting 40 Watt made in die-cast aluminum housing with decorative clear opal acrylic diffuser, IP 65 protection, spun aluminum powder coated canopy, low power Warm White (WW) LEDs connected in series and parallel combination with better heat dissipation arrangement with LED color temperature- 3000K ±300K, Highly efficient constant current electronic driver having operating voltage range from 140-280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 5KV complete suitable for up to 60mm OD pipe entry with fixing bolts including taking down existing unserviceable post top light of any description complete all as specified and directed by Engineer-in-Charge. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge.
Supply and fix LED curb stone light ( RED,Yellow, Blue ,White , Amber,Green) fittings of length 500mm, height 200mm and width 150mm, with curb angle 45 degree, operating voltage 36 volts DC power supply, having foundation hight 40mm, foundation width 20 mm, foundation stand hole 10 mm dia with 2 Nos of foundation rod having 8 mm dia to make curb stone theft proof and immoval,with load cayying / bearing capacity uoto 800 Kgs , in each curb stone LED strip lenght 465mm , Nos of LED in each strip 22, power consumption 2.34W per curb stone having one connectors with 2 Nos (1 male & 1 Female) with 2 core wire, Comlete all as specified and directed by Engineer in charge.
M & L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 50 mm dia all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 4 sq. mm nominal cross section in service connections complete all as specified and as directed.
Material and labour for painting with two coat of aluminium paint on all steel surfaces such as poles, channels, angles, clamps, nuts, bolts and washers of any description including pasting of radium reflector band / strips (Make: 3M or equivalent) of 5 cm wide in Green (02 Nos) & White (01 No.) colour shall be provided at a height of 1.25 mtr from coping of pole and writing the pole number in white colour on black background at a suitable place on the pole including applying one coat of smosam on PCC coping of pole complete all as specified and directed by Engineer-in-Charge. Note : If painting required on existing tringa strip light pole than contractor have resonsible to removing/disconnecting of tringa strip light from existing steel pole carefully and refixing/connecting the same after painting.
S&F Pin type, porcelain, vitreous, white,brown or green insulator in repair including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 50mm height, 65mm dia for 550 volts grade
S&F Shackle Type, Porcelain, vitreous, white, brown or green insulator in repair with working pressure 550 V,Height 50 mm and Max. dia 65 mm including galvanised mild steel straps, washers, insulator bolts, washers and nuts.
M&L for aluminium conductor steel reinforced (ACSR) on pole stringing properly on insulators and binding with aluminium binding wire, jumper set complete for any size (Mink, Rabbit, Ferret, Wessal, Squirel) of conductor complete all as specified and as direcetd by the Engineer-in-Charge.(NOTE:- Measurement and payment shall be made by measuring horizontal distance between centre of two adjustant poles and adding 3% extra for sag, joints and jumpers etc)
Supply and erection of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 meters long) including painting of poles with two coats of aluminium paint over a coat of red oxide primer on all exposed surfaces and black bituminous paint on embedded portion and Zebra marking on pole with black paint up to one meter height above PCC coping including pasting of radium reflector band / strips (Make: 3M or equivalent) of 5cm wide in Green (02 Nos) & White (01 No.) colour shall be provided at a height of 1.25mtr from coping of pole and writing the pole number in black colour on yellow background at a suitable place on the pole including taking down existing unserviceable pole of any description complete all as specified and directed by Engineer-in-Charge. (Note: Excavation and concrete shall be measured and paid separately).
Supply and fix mini landscape luminaires LED facade light 12 watt ( Red,Green and Worm White colour) fitting with high efficiency and glare free luminaire avalilable with integrated IP 67 and with 30 to 45 degree beam angle made up of Pressure die-cast aluminium alloy housing with toughened glass, IP 67 protection and impact resistance of IK07 and individual high power LEDs, Inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS complying including surface mounting using adjustable MS cradle of thickness 5 mm provided with the fixture including taking down existing unserviceable flood light fitting of any description complete all as specified and directed by Engineer-in-Charge.
Supply and fix luminaires LED facade light 20 watt( Red,Green and Worm White colour) fitting with high efficiency and glare free luminaire avalilable with integrated IP 67 and with 30 to 45 degree beam angle made up of Pressure die-cast aluminium alloy housing with toughened glass, IP 67 protection and impact resistance of IK07 and individual high power LEDs, Inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS complying including surface mounting using adjustable MS cradle of thickness 5 mm provided with the fixture including taking down existing unserviceable flood light fitting of any description complete all as specified and directed by Engineer-in-Charge.
Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq.mm with 4 Core complete including taking out u/s cable all as specified and directed by Engr-in-charge.
Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m
M & L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms complete all as specified and as directed.
Excavation in tenches not exceeding 1.5m wide and not exc 1.5m depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and as directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.
M&L for sand cushioning in trenches for cable protection including consolidation complete all as directed.
Supplying and laying un reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed
M&L Boring of holes under road, pavement, hard standing by Manually up to size 80 mm complete all as specified and directed
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded BT stone aggregate as in bed block for hold fast or coping including necessary form work complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in foundation for including necessary form work complete all as specified and directed by Engineer-in-Charge.
M/S Kumar Contractors (BID ID -3489212)
Allied Agencies (BID ID -3498661)
M/s Sagar Construction (BID ID -3490418)
POONAM ELECTRIC INDUSTRY (BID ID -3498716)
anand enterprises (BID ID -3490270)
Maa Durga Electricals (BID ID -3498549)
Lamba Enterprises (BID ID -3492500)
M/s Sohanil Construction (BID ID -3492552)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
Tenderdocuments61.pdf
Tender Documents • 1.38 MB
BOQ_827001.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .