CERTAIN REPAIRS TO ROOF TREATMENT JOINERY ITEMS SUNKEN FLOOR TREATMENT TILES, RAIN WATER PIPE GI PIPE PLINTH PROTECTION PLASTERING CHAJJAS OVER HEAD TANK CLEANING AND OTHER MISC SERVICES AT ZONE B PHAE III DARE DSC ACCN UNDER AGE BRI RD EAST BANGA

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, valley gutters etc complete all as specified and as directed (Height up to 12 to 15mtr, factory type bldg/Hangar) complete all as specified and as directed

Material and labour for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/clading to wall fixed with self tapping screws complete all as specified and as directed (Height up to 12 to 15mtr, factory type bldg/Hangar) complete all as specified and as directed

Disconnecting of water connection from the service water tank, lowering of service water tank of capacity exc 500 and n exc 1000 Ltrs and and keep in safe custody for rehoisting providing temporary water supply connection to occupation and finaly rehoisting and reconnection of service water tank of capacity exceeding 500 ltrs & n.exc 1000 ltrs in old position after cleaning & removing all scales & dirt etc from mouth of pipe complete all as specified and as directed

Disconnecting of water connection from the service water tank, lowering of service water tank of capacity exc 250 and n exc 500 Ltrs and and keep in safe custody for rehoisting providing temporary water supply connection to occupation and finaly rehoisting and reconnection of service water tank of capacity exceeding 250 ltrs & n.exc 500 ltrs in old position after cleaning & removing all scales & dirt etc from mouth of pipe complete all as specified and as directed

Taking down old tarfelt on roof including padding concrete etc existing roof treatment sweeping cleaning washing down to remove dust etc and removing debris/rubbish etc to a distance exceeding 5 Km and not exc 10 Km from the site. (Height of building up to 15 Mtr, factory type bldg/Hangar) complete all as specified and as directed

M&L cutting V grooves 15mm X 15mm in existing roof or terrace and cleaning out and filling /making good with epoxy based compound NITOMARTAR PE of FOSROC chemicals as per directions of manufacturer. (Height of building up to 15 Mtr, factory type bldg/Hangar) complete all as specified and as directedcomplete.

M&L for PCC 1:2:4, type B0 (Using 12.5mm graded stone aggregate) as in padding concrete for levelling etc (Height of building up to 15 Mtr, factory type bldg/Hangar) complete all as specified and as directed

M&L for rendering 10mm thick cement screed over roof concrete surface in CM 1:3 and finishing the surface even and smooth without using extra cement with water proofing compound complete all as specified and directed. (WPC shall be measured and paid seperately).(Height of building up to 15 Mtr, factory type bldg/Hangar) complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and directed

M & L for applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm as binding material and provide modified polymeric five layered APP (Atactic Polypropylene modified Polymeric) membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.20 kg/sqm all as specified and directed by Engr-in-Charge. Make - M/s Sika India Pvt Ltd( Sika WP Shield 103/104, M/s Fosroc Chemicals ( Proofex Tochseal 3 PI), M/s STP Ltd ( Super Thermolay APP PL/MT), M/S IWL India Ltd ( Hyperplas Brand Fibreglass, M/s Tiki Tar Danosa (India) Pvt Ltd ( ''HUDROSTOP' ). Make of Primer - M/S STP Ltd ( Shali Tex Primer), M/S Tiki tar Ltd( WB & OB & Tiki Flash.

M & L apply two coats of aluminium paint on roof complete all as specified and as directed

M & L & precast cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in slab for placing water tank complete all as specified and as directed .

Material and labour for mild steel de-formed bar 8 mm dia cut to length bent to shape required including cranking bending and binding with MS wire not less than 0.90 mm dia complete all as specified and as directed

All are as per item Ser No 13 above but 10 mm dia and above MS bars as handles complete all as specified and as directed

Dismantling water tanks and removing exceeding 500 ltrs and not exceeding 1000 ltrs in capacity.

S & F 1000 ltrs capacity Rotational mouldedd polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed

S & F Ball valves 25 mm bore high pressureof PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed including socket of size suitable if required at site etc, complete all as specified and as directed

S & F in repairs for 20 mm dia ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed

M&L Welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded exc.6mm but n.exc 9mm complete.

Dismantling Sructural steel work including door ,gates but excluding framed work.

S & F Mild steel work as in doors or gate, ladder of angle iron, Rungs in static tank of other section gusset plate rails ladder & Hand rail and Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -O or Fe 310 - 0, complete all as specified and directed by Engineer-in-Charge

S&F in repairs vitreous china wash hand basin (Pedestal type) white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts.

Supply and fix health faucet chromium plated with flexible pipe including fixing bracket make Jaguar CAT No 573 or equivalent.

S & F in repairs bib tap, fancy type (two way) chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed 15 mm complete all as specified and as directed

S & F in repairs PVC low level flushing cistern of cap 10 ltrs including PVC flush pipe for squatting pan fixed to wall ISI marked completed with brackets and accessories and making good to disturbed portion complete matching with existing surface and Making GI pipe connection low level complete.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L coloured non skid joint less ceramic tiles (non-skid) of size 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L coloured glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.42 sqm and not exceeding 1.00 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick dark shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Material and labour for 75mm thick cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection including joint filling with bitumen and sand mixed in equal proportion complete all as specified.(including demolition of old one)

Dismantling of interlocking tiles/chequered tiles any pattern laid bedded and pointed in any mortar

M&L coloured interlocking paver blocks 60mm thick of approved pattern and make, compressed over 50mm thick sand cushioning over compacted earth complete Note : Quoted shall be inclusive of levelling of finished tiled surface with vibrator compacting machine etc complete all as specified and directed.

All as per item No 34 here-in-before, but except interlocking tiles complete all as specified and directed

M & L for sand filling under floors or in foundations including watering and consolidation for laying of interlocking paver blocks (Note : mining sand/stone dust shall be of approved quality and should be free from lumps/broken/flaky aggregate)

M&L chequered cement concrete tiles (with grey cement and pigment) maunufactured in rubber moulded finish of size not less than 30cm x 30cm x 22 to 25 mm thick, set, jointed and pointed in near cement slurry including 15 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and as directed .

All as per item No 37 here-in-before, but except tiles including making good of undulated tiles set right and leave all surroundings finished as it is complete all as specified and directed.

Taking down cement plaster of any description on walls concrete surfaces including racking out joints hacking for key scrubbing down with water remove dust debries/rubbish etc.

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces and even smooth without using extra cement complete all as specified and as directed

M&L preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed

Material and labour for two coat oil bound distemper including preparation of newly plastered or old and previously distempered surfaces of wall by complete removal of existing treated surfaces over and including a coat of priming paint to receive distemper complete all as specified and direcrted by EIC.

Taking up or down steel water tubing 15 mm bore including connection and fittings scgregating serviceable pipes and fitting and stacking properly at sites for re-use.

Taking up or down steel water tubing 20 mm bore including connection and fittings scgregating serviceable pipes and fitting and stacking properly at sites for re-use.

Supply and laying steel water tubing 15 mm bore galvanised medium grade with all fittings fixed on walls ceiling or laid in floors or any other situation complete all as specified and as directed

Supply and laying steel water tubing 20 mm bore galvanised medium grade with all fittings fixed on walls ceiling or laid in floors or any other situation complete all as specified and as directed

S & F in repairs Gun - metal , globe or gate valves 20 mm bore cast copper ally screwed down high pressure with crutch or butterfly handle screwed both ends or iron pipe or for union and fixed complete all as specifed and as directed.

S & F in repairs Gun - metal , globe or gate valves 25 mm bore cast copper ally screwed down high pressure with crutch or butterfly handle screwed both ends or iron pipe or for union and fixed complete all as specifed and as directed.

S & F in repairs PVC (SWR) pipes single socketed 110 mm bore laid in ring joints, fixed to walls complete all as specifed and as directed.

S & F PVC (SWR) 110 mm bore bends of any radius complete all as specifed and as directed.

Supply and in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm each in each pane including hacking out old broken glass from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones etc all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles.

Material and labour for brick work with sub class 'B' straight or curved on plan exc 6 m radius with old size bricks built in CM 1:4 complete all as specified and as directed

Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces and finished fair and even without using extra cement complete.

Material and labour for preparation of new plastered or un treated plastered surfaces and applying two coats of weather coat emulsion paints over and including a coat of primer over and including 2mm thick external wall care putty with necessary sand papering to obtain smooth finish complete all as specified and direcrted by EIC.

Material and labour for preparation of new plastered or un treated plastered surface and applying one coat of white wash on wall surface complete all as specified and as directed by Engineer-in-Charge.

Demolition of RCC as in Chajja of fourth storey building or height upto and including 10 mtr etc., including cutting old reinforcement to facilitate demolition complete

M&L reienforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in chajja of four storey building or height upto and including 10 mtr etc including necessary form work/scaffolding etc complete all as specified and as directed

M&L mild steel bars 10mm dia and over for fourth storey building height or height upto and including 10 mtr etc., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Labour only for rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15cm but n exc 30cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. (Note : This item is operatable when plastering ordered to be done at specific places as mentioned in the item over and above general plastering item to compensate extra labour cost)

Material and labour for preparation of old surfaces of wall and applying one coat of oil bound distemper all as specified and as directed by Engineer-in-Charge.

Fixing only including re adjusting the disturbed 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete

Re adjusting disturbed 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete

Re adjusting disturbed 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete

Cleaning top surface of the RCC roof by brushing with wire brushes for removing caked mud etc sweeping with brooming and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and removing from the site from the premises as to where directed by the Engr - in - charge.

Cutting and removing grass, bushes, vegetable and unwanted plant growing near rainwater pipes and Y junction of sewar pipe near sanitary lines and parapet of roof, chajjas & shaft portion of building etc and surfaces finishes properly with plaster in cement mortar 1:1 and applying two coats of cement base paint on disturbed surfaces to match the existing surfaces complete all as specified and directed.

Taking down chowkat or framed with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete.

Taking down shutters of any description area exc 1 sqm and n. exc 2 sqm each

Taking down shutters of any description area exc 2 sqm each

M&L for 35 mm thick factory made 2nd class hard wood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F flush shutters 40mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S & F flush shutters 50mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per specification and drawings fixed with drilling and min 100 mm screw with rawl plug complete

S & F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S & F100mm Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified.

S & F 150 mm long extruded aluminium alloy handles, fabricated type., anodised complete all as specified.

M & L 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Material and labour for painting to steel and iron surfaces over 10 cm width or girth not other wise described, with one coat of synthetic enamel paint including preparation of old painted surfaces and applying anticorrosion fosroc primer all as specified and as directed by Engineer-in-charge.

Material and labour for two coat of weather coat exterior emulsion paint (exterior washable quality as approved by GE) including preparation of newly plastered or old and previously painted surfaces of wall by complete removal of existing treated surfaces over and including a coat of priming paint to receive paint complete all as specified and direcrted by EIC.

Material and labour for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old white wash surfaces and applying one coat of white wash on wall complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old white wash surfaces and applying one coat of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge.

Material and labour washing, rubbing down and stopping of of old distempered wall surfaces and applying one coat of distemper oil emulsion on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour washing, rubbing down and stopping of of old distempered wall surfaces and applying two coats of distemper oil emulsion on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying one coat of distemper oil emulsion on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of wall surfaces and finishing the surface with two or more coats of Birla/JK wall care putty to receive the good & smooth surfaces and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

S CHANDRASHEKAR (SREE BUILDERS)

SAI CONSTRUCTIONS

Gnani Builders

ROHAN BUILDERS

Moulya Builders

ADWITHI

Lucky Enterprises