REPAIRS TO CERTAIN INTERNAL ROADS OF VARIOUS UNITS INCLUDING NAGPUR UNDER AGE B/R-II AT GE KAMPTEE.

Amount

Part - I (Works under items No. 1.1,2 to 17 herein below are to be executed at the locations in Kamptee area as directed.)

Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust with mechanical equipment and mud or water, scoring sunken surfaces in roads, paths etc by using pressure air ,cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed bituminous macadam, binder and chippings), depth of pot holes exc 30mm complete all as specified and as directed.

Material & Labour for preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc. complete all as specified and directed.

Material & Labour for applying evenly a priming/tack coat with bituminous primer using paving bitumen @ 10 kg per 10 Sqm on black top surface using mechanical sprayer complete all as specified and as directed

Material & Labour for premix bituminous macadam (consolidated thickness 75mm or less) with 4% binder content by weight of total mix (paving bitumen of grade VG-30), mixed in hot mixed plant and laid by using mechanical paver and rolled & compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with mechanical equipments and clean the surface by using pressure air to remove all loose dirt etc., complete all as specified and as directed.

Material & Labour for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on existing black top surfaces/on existing surface before laying of Asphaltic semi dense concrete by using mechanical sprayer, complete all as specified and as directed.

Material & Labour for premixed asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. Note: The work should be executed by using hot mix plant and mechanical paver.

Material & Labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5 mm thick single coat as in center line and edge line road marking of 150/100 mm width using 'HOT MARK' thermolastic modern propelled road marking machine as directed including all ingredients such as binder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the table No. 800.4 of MOT specification including spraying of glass beads etc., all as per manufacture instructions and as directed by Engineer-in-Charge.

Supply and fix Solar studs size 125x125x25 mm aluminium alloy and polycarbonate stud (Red/yellow LEDs) 3+3 LEDs with shank in tough aluminium diecost body with stem, complete as per MOST/IRC specifications and manufacture's instruction, complete all as specified and directed.

Surface dressing not exceeding 15cm deep and getting out in soft/loose soil for road side berms to required gradient complete all as specified and as directed.

Material & Labour for spreading moorum in road berms 100mm spread thickness for light wearing surface with moorum/Red Bajri, spread, rolled, consolidated to gradient and camber required , complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1 : 4 : 8 Type D-2 (using 40 mm graded stone aggregate), as in sub base of paths, hard standing and similar works, complete all as specified and as directed.

Material and labour for 60mm thick, rubber finish on top, M-35 grade, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 laid over 30mm thick stone dust screed/cushion, with grey cement and pigment complete all as specified and as directed.

Material and labour for stone kerb of roughly squared stones of size 15 cm X 30 cm X 7.5 cm, dressed so that the maximum depression form a straight edge held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20 mm for the rest of surfaces jointed in cement mortar 1:6 and struck, complete all as specified and directed.

Supply and fix regular delineators made out of MS pipe of 75mm dia with powder coating/stove enamelled paint, 120 cm long with 3 Nos 100mm wide prismatic / commercial AVERY DENSION 3M USA grade reflective sheeting colour coding as approved and provided with reinforced mesh complete all as specified, as directed and as per manufacturer's instructions.

Supply and fixing of 900 mm dia convex mirror made of PC material provided with suitable MS pipe post, duty powered coated for road turning, intersections, curves T junctions, parking lots etc. and also held ideal for surveillance. It should have clear and definitr mirror image having 130 degree of viewing angle. It is unbreacable & stronger than glass. Note: Rate for fixing of mirror with PCC 1:2:4 type B-2 filling of size 45X45X50 cm shall be deemed included in the rate quoted.

Supply and fixing retro reflective boards in shape of rectangle of size 1.0m X 1.40 m made out of 2 mm thick stainless steel both side bounded/ pested with high prisnatic (iv) sheet manufactured by " Avery Dennison" or 3M with desired letters/ logos/ designed as directed. the board shall be supplied with and including stainless steel frame made out of 25 mm dia pipe in frame around duly welded with and including stainless steel sheet and stainless steel posts of 38 mm dia and full length of 2.20 m one side and 2.8 m other side complete all as specified and directed. Note: Rate for fixing of boards with PCC 1:2:4 type B-2 filling of size 45 X 45 X 60 cm to be incl in unit rate.

Part - II (Works under items No. 18.1 to 33 herein below are to be executed at the locations in Nagpur area as directed.)

Material & Labour for preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc. complete all as specified and directed.

Material & Labour for applying evenly a priming/tack coat with bituminous primer using paving bitumen @ 10 kg per 10 Sqm on black top surface using mechanical sprayer complete all as specified and as directed

Material & Labour for premix bituminous macadam (consolidated thickness 75mm or less) with 4% binder content by weight of total mix (paving bitumen of grade VG-30), mixed in hot mixed plant and laid by using mechanical paver and rolled & compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with mechanical equipments and clean the surface by using pressure air to remove all loose dirt etc., complete all as specified and as directed.

Material & Labour for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on existing black top surfaces/on existing surface before laying of Asphaltic semi dense concrete by using mechanical sprayer, complete all as specified and as directed.

Material & Labour for premixed asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. Note: The work should be executed by using hot mix plant and mechanical paver.

Material & Labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5 mm thick single coat as in center line and edge line road marking of 150/100 mm width using 'HOT MARK' thermolastic modern propelled road marking machine as directed including all ingredients such as binder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the table No. 800.4 of MOT specification including spraying of glass beads etc., all as per manufacture instructions and as directed by Engineer-in-Charge.

Supply and fix Solar studs size 125x125x25 mm aluminium alloy and polycarbonate stud (Red/yellow LEDs) 3+3 LEDs with shank in tough aluminium diecost body with stem, complete as per MOST/IRC specifications and manufacture's instruction, complete all as specified and directed.

Surface dressing not exceeding 15cm deep and getting out in soft/loose soil for road side berms to required gradient complete all as specified and as directed.

Material & Labour for spreading moorum in road berms 100mm spread thickness for light wearing surface with moorum/Red Bajri, spread, rolled, consolidated to gradient and camber required , complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1 : 4 : 8 Type D-2 (using 40 mm graded stone aggregate), as in sub base of paths, hard standing and similar works, complete all as specified and as directed.

Material and labour for 60mm thick, rubber finish on top, M-35 grade, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 laid over 30mm thick stone dust screed/cushion, with grey cement and pigment complete all as specified and as directed.

Material and labour for stone kerb of roughly squared stones of size 15 cm X 30 cm X 7.5 cm, dressed so that the maximum depression form a straight edge held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20 mm for the rest of surfaces jointed in cement mortar 1:6 and struck, complete all as specified and directed.

Supply and fix regular delineators made out of MS pipe of 75mm dia with powder coating/stove enamelled paint, 120 cm long with 3 Nos 100mm wide prismatic / commercial AVERY DENSION 3M USA grade reflective sheeting colour coding as approved and provided with reinforced mesh complete all as specified, as directed and as per manufacturer's instructions.

Supply and fixing of 900 mm dia convex mirror made of PC material provided with suitable MS pipe post, duty powered coated for road turning, intersections, curves T junctions, parking lots etc. and also held ideal for surveillance. It should have clear and definitr mirror image having 130 degree of viewing angle. It is unbreacable & stronger than glass. Note: Rate for fixing of mirror with PCC 1:2:4 type B-2 filling of size 45X45X50 cm shall be deemed included in the rate quoted.

Supply and fixing retro reflective boards in shape of rectangle of size 1.0m X 1.40 m made out of 2 mm thick stainless steel both side bounded/ pested with high prisnatic (iv) sheet manufactured by " Avery Dennison" or 3M with desired letters/ logos/ designed as directed. the board shall be supplied with and including stainless steel frame made out of 25 mm dia pipe in frame around duly welded with and including stainless steel sheet and stainless steel posts of 38 mm dia and full length of 2.20 m one side and 2.8 m other side complete all as specified and directed. Note: Rate for fixing of boards with PCC 1:2:4 type B-2 filling of size 45 X 45 X 60 cm to be incl in unit rate.

Manoj Jethani

Meet Road Lines

Bidder Name

Meet Road Lines

Manoj Jethani

VIJ ASSOCIATES