Renovation/ modification of advisor chamber, conferance hall and making new provision of store in existing room, at first floor in TRAI section, Admin building, Jhalana, Jaipur.

Amount

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick.

Providing and laying PVC flooring and skirting in approved pattern in approved colour and shade on a smooth and damp proof base using rubber based adhesive of approved quality and manufacture like Dunlop S-758, Fevicol SR-998 or equivalent including rolling with light mallet weighing about 4Kg all complete as per direction of engineer in charge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

One coat.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

With cement mortar 1:4 (1cement: 4 coarse sand).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).

Dismanteling and refixing of the existing 12 mm thick toughened glass partition with door i/c removal of silicon from joints with due care in new position as per requirement by jointing the existing walls and aluminiumn members, making arrangement for door with cutting floor and repairing the same by cement mortar after fixing floor spring with rawl plug of required dia. Toughened glass panesl shall be jointed with approved quality silicon wherever required all complete as per the directions of Engineerin-charge.

Providing and fixing tiled false ceiling of approved material of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 15x32 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 15x32 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 15x32 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 19x19x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI Anchor fastener M6 with hole for hangers,3 mm GI adjustable rods with galvanized hook clip with J wire assembly fixed to ceiling with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 15 mm, all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Tiles of size 595x595mm of Armstrong Optra (Micro look) or equivalent, minimum 15mm thick manufactured from high density glass wool having NRC ( Noise reduction coefficient ) 0.95. Tiles should withstand a permanenet ambient RH upto 95% without sagging, thermal conductivity 0.052-0.057 W/mk and light reflectance should be 88% all complete as per direction of Engineer in Charge.

Providing and fixing of WPC ( wood plastic composite) 23 mm deep louvers paneling on wall with lock pins and stainless steel screws etc as per approved design colour, all complete as per direction of engineer-in-charge.

Providing and fixing 3 mm thick PVC UV sheet in marble shade on wall fixed with silicon of approved make after proper cleaning the wall surface, all complete as per direction of engineer-in-charge.

Providing and fixing A plus grade wall paper of 160 to 180 GSM, approved colour and design applying chemical on wall, all complete as per direction of engineer-in charge.

Providing and fixing of PVC logo with light " Sign of TRAI" on PVC UV marble sheet, all complete as per direction of engineer-in-charge.

Providing and fixing of pvc alphabet "भारतीय दूरसंचार विनियामक प्राधिकरण" on UV sheet with provision of light, all complete as per direction of engineer-in-charge.

Providing and fixing 18mm thick block board ( BWP type ISI marked) Including and lipping on exposed face complete as per architectural drawings and directions of engineer-in-charge.