T.S.No.24/2025-26 of SE/GCC/Salem (GL)

Clearing Heavy jungle and disposing off to a place away from the site as directed by the Engineer in charge including all labour charges, T&Ps etc., complete.

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for in hard gravelly soil.

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for In SDR (Not Requiring Blasting).

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for In MR and DMR not requiring blasting.

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.In Hard rock wedging and chesseling

PCC 1:3:6 using 20 mm HBG metal for foundation including cost of cement without formwork all materials, labour, lead, lift etc. complete.

PCC 1:2:4 mix using 20 mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. Without Form Work.

PCC 1:2:4 mix using 20mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. With form Work.

RCC 1:1.5:3 using 12 to 20mm machine crushed metal for Plinth concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement (For Plinth concrete)

RCC 1:1.5:3 using 12 to 20mm machine crushed metal for precast cable duct slab with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement (For Pre cast cable duct slab)

Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete.

Brick work in CM 1:5 using II class chamber burnt bricks for cable duct wall including cost of all materials, all labour, lead, lift, curing, etc., complete.

Plastering in cm 1:3, 12 mm thick for concrete work including cost of cement, all materials, labour, lead, lift etc., complete.

Plastering in cm 1:5, 12 mm thick for wing wall including cost of cement, all materials, labour, lead, lift etc., complete.

Colour washing 2 Coats over a base coat of primer using Exterior weather coat using Asian APEX or Equivalent of approved Brand,quality and colour for outer wall surfaces for all floors including cost of all labours to work at all levels cost of materials brushes scaffolding charges etc. complete complying with standard specification and as directed.

Supplying, fabrication, galvanizing and fixing of GI / MS angles of various sizes to be fixed in the cable duct to the required length including cost of all materials, labour, lead, lift etc., complete.

Refilling the excavated earth including all lead, lift etc, complete.

Removal of excess earth to a distance of 2.00 Km with all lead, lift etc., complete.

Transporting and fixing of RCC cover slab from curing tank to working spot including cost of labour, lead, lift etc., complete.

Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm including cost of all materials,transport to site, labour, lead, lift, etc., complete., as per standard specification.

Supplying and fixing of 20 mm PVC bib cock including cost of all materials, etc., complete.

Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 20 mm dia.

Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 32 mm dia.

Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 40 mm dia.

Providing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 4 kg/cm2 including all specials and cost of all material, lead, lift, etc., complete as per standard specification and as directed by the Engineer-in-charge at site.

Providing and fixing wheel valve of 32 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.

Providing and fixing wheel valve of 40 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.

Fabrication, galvanizing and supply of foundation bolts of 20 mm dia 1.20m length including providing cleat at bottom and threading at top including cost of all materials, labour lead lift etc., complete.

Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site.

Supplying and fixing of MS rails of size 90/120 lbs for transformer plinth at site including cost of all lead, lift, etc., complete.

Supplying and spreading of metal jelly of size 12 mm to 20 mm to an average thickness of 10 cm and over 10 cm stone dust including cost of all materials lead, lift watering and levelling surface etc., complete.

Supply of Iron & Steel items as per latest ISI RS JOIST 200X100 mm.

Supply of Iron & Steel items as per latest ISI MS Channel 125X65 mm.

Supply of Iron & Steel items as per latest ISI MS Channel 100X50 mm.

Supply of Iron & Steel items as per latest ISI MS Angle 100X100X8 mm.

Supply of Iron & Steel items as per latest ISI MS Angle 65X65X6 mm.

Supply of Iron & Steel items as per latest ISI MS Angle 50X50X6 mm.

Supply of Iron & Steel items as per latest ISI M.S.Flat 50x8mm.

Supply of Iron & Steel items as per latest ISI M.S Flat 65X10 mm.

Supply of Iron & Steel items as per latest ISI MS Rod 40 mm.

Supply of Iron & Steel items as per latest ISI RTS ROD 20mm

Supply of Iron & Steel items as per latest ISI RTS ROD 6 mm.

Labour, machineries, consumables for fabrication of Heavy section without length wise welded joints (Sectional weight 14Kg/Mtr and above).

Labour, machineries, consumables for fabrication of Heavy section with length wise welded joints (Sectional weight 14Kg/Mtr and above).

Labour, machineries, consumables for fabrication of Light section (sectional weight below 14Kg/Mtr)

Labour of erection of heavy sections.

Labour of erection of light sections.

Labour for rust removing,cleaning painting of first primer coat(Red - Oxide) of all sections including cost of paint , brush & consumables.

Labour for removing,cleaning painting(Aluminium) of first finishing coat of all sections including cost of paint , brush & consumables.

Labour for painting (Aluminium) of second finishing coat of all sections including cost of paint, brush & consumables.

Labour for transporting of iron & steel from chennai with including loading & unloading charges (350 Kms)

Labour for erection with own crane arrangement and connecting link rod, SF6 Gas filling and other consumables ans ad directed by the field Engineer 33/22 KV Breakers

Labour for erection with own crane arrangement including providing holes whereever required, fixing junction box and other consumbales and as directed by filed engineer 33/22 KV CT

Labour for erection of AB switches including cost of lubricant, consumables and wiring ( if necessary) allignment, checking of operation by both manual and electrical ( if necessary) and as directed by the field Engineer Without earth , motor operated 110 KV

Labour for erection of AB switches including cost of lubricant, consumables and wiring ( if necessary) allignment, checking of operation by both manual and electrical ( if necessary) and as directed by the field Engineer 22 KV

Labour for erection of AB switches including cost of lubricant, consumables and wiring ( if necessary) allignment, checking of operation by both manual and electrical ( if necessary) and as directed by the field Engineer 22 KV(LC WORK )

Labour for erection of 110 KV LAS Station type with surge monitor

Labour for erection of 22 KV LAS Station type

Labour for erection of Insulators single pole stack up right,under hang or suspension 110 KV

Labour for erection of Insulators single pole stack up right,under hang or suspension 22 KV

Labour for Erection of Panel / Battery charger (Simlex indoor / out doors ) including alignment and earthing as directed by field engineer

Labour charges for removing rust, primer coat, first & second coat painting both sides & in M.S.board RSJoist & yard light pole etc., including cost of enamel paint (Dulex,Asian, Berger preferred) and other consumables directed by the field Engineer.

Fabrication and fixing of bell mouth providing jumper connection in the solidcore /PT insulator including the cost of GI Pipe 50mm dia one meter & other consumables & as directed by the field engineer

Labour for loading or unloading or shifting of materials without using board's Crane (one operation) Non - fragile

Labour for loading or unloading or shifting of materials without using board's Crane (one operation) Fragile

Labour for loading or unloading or shifting of 33/22/11KV breakers, including panels by own crane arrangement.(One operation)

Supply and provision of 600 mm mean dia 300 mm height ,36mm thick cement collar for identification as directed by the field engineer

Labour charges for machineries, consumables for earthing and for the erection of earth mat, earth connection, earth electrode, consumables for earthing etc., as directed by the field engineer at site

Labour charges for machineries, consumables for fabrication of earth electrode with spike. 10mtr/6mtr length for earth bore as directed by the field engineer at site

Labour machineries, consumables for fabrication & erection of earth spikes.

Providing 140/150mm dia bore including labour,lead,lift etc., including mobilization in all types of soil and erection of earth electrode, supply and providing A4 Grade bentonite powder with 5% common salt mixed with available site clay soil with water 5Kg/meter depth in earth bore and pouring water and tightening of earth bore, upto satisfactory earth resistance value and as directed by the field engineer at site .

Labour for earth work excavation in all class of soil with intial lead of 10m and lift of 2mts. Etc., for earthmat work In hard graval soil

Labour for earth work excavation in all class of soil with intial lead of 10m and lift of 2mts. Etc., for earthmat work In soft disintergarated rock

Labour for earth work excavation in all class of soil with intial lead of 10m and lift of 2mts. Etc., for earthmat work Refilling of excavated soil

Labour for stringing of strung bus including hosting of insulator 110 KV Single zebra conductor (1 span 3 runs )

Labour for stringing of strung bus including hosting of insulator 33/22/11 KV Single zebra conductor (1 span 3 runs )

Labour for stringing of strung bus including hosting of insulator 33/22/11 KV Single zebra conductor (1 span 3 runs ) (LC WORK )

Labour for erection of busbar including Aluminium welding joint if required as directed by the field engineer 75 mm busbar with bent

Labour for erection of busbar including Aluminium welding joint if required as directed by the field engineer 75 mm busbar without bent

Labour for erection of busbar including Aluminium welding joint if required as directed by the field engineer 50 mm busbar without bent

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.(LC WORK )

Supply and termination of cable core ends including the cost of cable socket (lug) ferrules, Aluminium tag strops etc., as per drawing and as directed by the field engineer

Labour for erection of cable in duct / trench including the cost of Aluminium tag for identification Upto 8 core

Labour for erection of cable in duct / trench including the cost of Aluminium tag for identification Above 8 core

Labour for erection of cable and clamping in structures including fabricationof clamps and fixing at uniform intervals as directed by field Engineer Upto 8 core

Labour for erection of cable and clamping in structures including fabricationof clamps and fixing at uniform intervals as directed by field Engineer Above 8 core

Supply of 6 Bolt Tension Fitting for zebra

Supply of 4 Bolt Tension fitting for zebra

Supply of Switch End clamp to Zebra

Supply of Switch End clamp to 3" bus bar

Supply of Switch End clamp to 2" bus bar

Supply of Free end to 3" Bus bar

Supply of Free end to 2" Bus bar

Supply of 'T' clamp for Zebra to Zebra

Supply of 'T' clamp for Zebra to 3" busbar

Supply of 'T' clamp for Zebra to 2" busbar

Supply of P.G. clamp for Zebra

Supply of L- clamp for zebra

Supply of Corona bell for 3" Busbar

Supply of Corona bell for 2" Busbar

Supply of Switch end clamp for panther

Supply of Switch end clamp for Mink

Supply of Bus bar jointing clamp for 3"bus bar

Manufacturing and supply of bolt of required length of 18 - 20 mm dia GI rod including cost of GI rod and 2Nos GI nuts & washer as directed by the field Engineer. ( Eye Bolt )

Supply and provision of M8,M9, M10,M12, & M16 full thread GI bolt, nuts & GI washer of various size for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

Labour for erection of yard light pole including laying of cable inside pole

Supply and erection of GI STEEL TUBULAR POLE FOR STREET LIGHT 6 metre length Single Bracket Pole with Base plate (250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 6000 mm length

Supply and erection of GI STEEL TUBULAR POLE FOR STREET LIGHT 8 metre length Double Bracket Pole with Base plate (250 x 250 x 6mm) 114.30mm OD x 5.40 mm Thick x 4500 mm length, 88.90mm OD x 4.85 mm Thick x 1750 mm length, 76.10mm OD x 3.25 mm Thick x 1750 mm length

Supply of LED lamp of reputed make of 72 Watts with fittings

Labour for Erection of LED lamp / Sodium Vapour Lamp 72W fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15 amps 2way strip connector and other consumables.

Manufacturing & Supply of yard light box of size 200 X 200 X 150D mm out of 18 SWG M.S.Sheet with cable entry holesm, fixing arrangements for fuse units and mounting clamps as directed by the field engineer including cost of all materials.

AC Black paint

Red - Oxide

Aluminium Paint

Labour charges for painting of earth raisers for providing green enamul paint

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.19/22mm

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.25/28 mm

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.32 mm

Supply & fixing of ISI mark bakelite HRC/ rewireable fuse holder in panels/boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. 16 amps

Supply & fixing of ISI mark HRC Fuse without holder of reputed make in panels /boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer. 2/5/10Amps

Supply & fixing of ISI mark HRC Fuse without holder of reputed make in panels /boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer. 63Amps

Supply and fixing of disconnected type terminal block suitable for C.T circuits in panel / box as required and as directed by field engineer

Supply and fixing of Godrej 6 lever navtol lock with duplicate keys for AB Switch and for any other purpose including the cost of ring and key token as directed by the field engineer

Supply and provision of 12 / 25 X 3 mm flexible braided copper for electrical connection including the cost of suitable copper lugs for criping of at both ends etc.as directed by field Engineer.

Labour for provision of cable end gland of suitable size

Supply and erection of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer including cost of GI Pipe 40mm dia.

GST for bidders within Tamil Nadu

GST for bidders outside Tamil Nadu (IGST)