Repair and Maint of ceiling fan, exhaust fan, heating appliances, solar appliances at Zone-I under the Jurisdiction of GE (A) Jaisalmer

Amount

Supply & fix including taking down for the following items in :-

(a) Fan condenser, 2.5 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp Make: Epcos, Bajaj, Havells, CG.

(b) Fan condenser, 4 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp Make: Epcos, Bajaj, Havells, CG

(c) Fan regulator electronic Modular step type, 120 watts, 1 module/2 Module Make: Anchor, Havells, legrand

(d) Steppped type electronic fan regulator flush type on the existing sheet 120 watts, Make: Anchor, Havells, legrand

(e) Rubber reel insulator, 3 Nos nut bolt , washer and lock pin complete all as specified and as directed.

(f) Ceiling fan blade

(g) Exhaust fan blade size up to 450 mm

(h) Ceiling fan fastner for fixing fan

(j) Ceiling fan downrod suitable size with GI Hook as per requirement of site of any size

Taking down ceiling fan / Exhaust fan/Wall fan/Air circulator fan of any sweep sealing cable ends dismanting blade and removing fan and blade to store complete all as specified and as directed.

Supply & Fix including taking down for ball bearing suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. Make : SKF/NBC/TATA

Supply & Fix including taking down for ball bearing suitable for exhaust fans up to 450mm size complete all as specified and as directed. Make : SKF/NBC/TATA

Supply & Fix including taking down for brass GM bush suitable for fan any size complete all as specified and as directed

M & L for rewinding of fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of following size complete all as specified and as directed.

(a) Ceiling fan 1200/1400 mm Sweep

(b) Exhaust Fan 250/300/380 mm

(c) Exhaust Fan 400/450 mm

(d) Exhaust Fan 600 mm

(e) Wall mounted fan 450 mm Sweep

(f) Air circulator 600 mm sweep

M & L for Painting of ceiling fan/ Exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and as directed.

Refixng of Ceiling fan and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.

Refixng of exhaust fan/Wall Mounting/Air circulator and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.

M & L for making of bearing cover housing as per fan shaft diameter of any type and size of ceiling fan and fixing at ball bearing in place of bush of required size by means of lathe machine (ball bearing shall be measured & paid separately)

Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/50 ltrs of any type and make, in MES store Yard complete all as specified.

Refixing storage type water heater storage type capacity 25/50 ltrs of any type and checking the serviceablity of all parts of such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly completet (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge.(Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below)

Supply & Fix including taking out for heating elements, 1.5 KW ISI mark 230 volts Make -THEETA/Hotmax/Elcon

Ditto all as per serial item no.13 above but 2 KW. Make- Theeta/Hotmax/Elcon or equivalent.

Supply & Fix including taking down for thermostat immersion point type 15 Amps, 230 volts/AC Make - THEETA/BAJAJ/HOTMAX/ELCON.

Supply & Fix including taking down for replacement of safety valve for 25/50 ltr geyser.

Supply & Fix including taking down for replacement of pressure releasing valve for 25/50 ltr geyser.

Supply & Fix including taking down for Metal clad plug top and socket, 3 pin, 20 Amps (Make: ABB, Legrand, C&S)

Supply & Fix including taking down for Three pin plug top, 16 amp capacity, 240 VAC, heavy duty (Make : Anchor, Cona )

Supply & Fix including taking down for MCB SP 16 Amps single pole, 230volt, 50 Hz Complete all as specified (Make Legrand, ABB, Schneider)

Supply & Fix including taking down for Fastners screw for fixing Geyser storage capacity 25/50 ltrs of any type and make

Supply & Fix including taking down for replacement of PVC connection pipe duly (copper) chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete all as specified and directed by Engineer-In-Charge.

Supply & Fix including taking down for replacement of indicator lamp assembly for geyser complete all as specified and directed by Engr-In-Charge.

Supply & Fix including taking down for replacement of 3 core PVC insulated and sheathed cable with copper conductor of size 40/0.076. Make - Plaza/National complete all as specified.

Supply & Fix including taking down for replacement of inlet & outlet assembly plate suitable for 25 ltrs capacity geyser as per existing pattern complete all as specified and directed by Engr-In-Charge.

Supply & Fix including taking down for replacement of inlet & outlet assembly plate suitable for 50 ltrs capacity geyser as per existing pattern complete all as specified and directed by Engr-In-Charge.

Supply & Fix including taking down for Inner tank of geyser of 25 Ltr capacity of made out of steel tank in replecement of leakage tank of geyser complete all as specified

Supply & Fix including taking down for Inner tank of geyser of 50 Ltr capacity of made out of steel tank in replecement of leakage tank of geyser complete all as specified

Supply & Fix including taking down for STOP COCK cast copper alloy, screwed down high pressure screwed both ends for iron pipe of 15 mm bore fancy type chromium plated complete all as specified. Make-Sieko, Prayag, Jaguar.

S & F including taking down for Bib tap chromium plated 15 mm dia cast copper alloy with butter fly handle, screwed down, screwed one ends for pipe of 15 mm dia complete all as specified and directed. Make-Sieko, Prayag, Jaguar.

Dismantling old defective solar water heater collector of any type any make.

Taking down of Old U/S hot water tank of any capacity any make.

S & F MNRE registered/approved 200 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.

S & F MNRE registered/approved 150 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.

S & F MNRE registered/approved 125 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.

S & F MNRE registered/approved 100 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.

S & F MNRE registered/approved 200 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with 20 tube holes of 58mm diameter and outer PPGI, thermostat and heater coil 2 KW and suitable size of MS powder coated stand 25x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.

S & F MNRE registered/approved 150 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.

S & F MNRE registered/approved 100 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.

S&F including taking down MNRE registered/approved Evacuated tube collector (ETC) type 1800mm long tubes with inner dia 47mm and outer dia 58mm with frame and frame angle 30 degree complete all as specified and directed by Engr-in-Charge.

S&F including taking down MNRE registered/approved Evacuated tube collector (ETC) type 2100mm long tubes with inner dia 47mm and outer dia 58mm with frame and frame angle 30 degree complete all as specified and directed by Engr-in-Charge.

Taking down of old U/S rusted MS structure of solar water tank any type any shape

Taking down of old U/S rusted MS structure of cold water tank any type any shape

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates grade Fe-290 (Gde E-165), including all lattice bars, stiffeners, gusset plates etc welded together complete to avoid any deformation complete all as specified and directed by Engr-In-Charge.

M&L for 25 mm thick grouting of foundation with cement concrete (1:2:4) complete to avoid any deformation complete all as specified and directed by Engr-In-Charge.

M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed.

Taking down old U/S , broken pipe of any type any size.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete of size 20mm including union, bends and tees complete all as specified. Make: Astral, Supreme

S&F including taking down for heating element for solar water heating system of capacity 3 KW complete all as specified & directed by Engineer-in-charge. MAKE : BAJAJ, REOLD, SPHERHOT

S&F including taking down for heating element for solar water heating system of capacity 2 KW complete all as specified & directed by Engineer-in-charge. MAKE : BAJAJ, REOLD, SPHERHOT

S&F including taking down for thermostat suitable for 100 to 500 litres capacity of solar water heater complete all as specified & directed by Engineer-in-charge. MAKE : BAJAJ, REOLD, SPHERHOT

Dismantling & taking out the unserviceable Gun-metal, globe or gate valves of any size from geyser/solar connection pipe complete all as specified and directed by Engr-In-Charge.

S&F for Gun-metal, globe or gate valves, with iron wheel head ,screwed both ends from iron pipe and fixed size 15 mm complete all as specified & directed by Engineer-in-charge. (Make: Zoloto/Leader/Kirloskar)

S&F for Gun-metal, globe or gate valves, with iron wheel head ,screwed both ends from iron pipe and fixed size 20 mm complete all as specified & directed by Engineer-in-charge. (Make: Zoloto/Leader/Kirloskar)

S&F for Gun-metal, globe or gate valves, with iron wheel head ,screwed both ends from iron pipe and fixed size 25 mm complete all as specified & directed by Engineer-in-charge. (Make: Zoloto/Leader/Kirloskar)

Supply & Fix including taking down for rotational moulded synthetic (HDPE) water storage tank with float valve 20mm brass of capacity of 500 litre capacity triple layered, cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. Make-Sintex,Polycon

S&F including taking out Ball brass valves,high pressure,with polythene float valve 20mm and flynut complete,screwed for iron pipe complete all as specified and directed

S&F including taking out Galvanised iron pipe medium grade 20 mm bore ISI marked with necessary fittings such as tees, elbows, bends, reducers, union etc fixed along wall/floor/roof incld covering with insulation all around with 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 KG/Cum conforming to IS 9842 as directed of rock wool/mineral wool, chicken mesh and cladding with 26 SWG alum sheet incld chasing/cutting of wall as required complete all as specified and directed by Engr-in-charge.

S & F including taking out for GI tubing 15 mm dia medium grade galvanised with necessary fittings such as tees, elbows, bends, reducers, union etc laid in wall ceiling & Floor including all fittings all as specified and directed.

S & F including taking down sheet metal single pole and neutral enclosure with a two pin and eath plug and socket complete with one single pole MCB 20 Amp 240 V complete all as specified and directed by Engr-in-charge.

M & L including taking down for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in PVC conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 4.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 4.00 Sqmm cable & one run of 4.00 Sqmm cable shall be paid as one unit length)

shiv construction & Engineers

M/s Ramesh & Company