GE863/EWS-T-08 OF 2023-24

Amount

Cleaning & desludging of manholes, depth not exc 1.0 m, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water for smooth functioning of sewage line and manhole. Waste obtained shall be removed to outside of MD land and burried in ground including necessary excavation, earth work and spreading of bleaching powder, complete, all as specified and directed. Note :- (i) No extra cost for necessary excavation and refilling with excavated soil over the sludge and bleaching powder shall be paid and quoted rate shall be deemed to be included for this provision. (ii) The cleaning of manhole shall be carried out mechanically using apropriate technological appliances.

Cleaning of gully traps by removing all sludge / waste etc including cleaning of connected pipe up to 1st Man Hole to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land complete all as specified and directed.

Cleaning of floor traps (at ground floor) by removing all sludge / waste etc including cleaning of connected pipe up to gully trap to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land, complete, all as specified and directed.

Removal of blockage from Indian WC / EWC (at ground floor) by removing all sludge / waste etc including cleaning of connected pipe up to first manhole to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc (in covered tanks) outside M.O.D land, complete, all as specified and directed.

Cleaning & desludging of septic tanks of capacity 30 to 50 users by pumping out sewage & sludge & disposing all waste including liquid in covered tanks outside MOD land and finally cleaning & washing with fresh water, complete, all as specified and directed. .

Cleaning of existing sewage lines of dia 100 to 200 mm, any depth not exceeding 2.50 m deep by mechanically using appropriate technological appliances as required at site including manholes, inspection chamber, testing after cleaning and getting out sludge and accumulated solids / semi solids from connected manholes / Lines, removing the sludge / spoil min 250 mtrs away from MOD land and refixing the manhole cover, complete, all as specified and as directed.

Excavation in trenches in hard/dense soil n. exc 1.5M wide and n. exc 1.5 in depth for foundation etc and getting out, complete, all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer ,as in soil, complete, all as specified and directed.

M&L for removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point ,complete, all as specified and directed.

Demolition and breaking up 100 mm/110mm dia bore (PVC/salt glazed stoneware drain pipe) including PCC packing under haunching against the sides of pipe bed and complete PCC of bed and removal of debris to a distance exc 1.0 Km but n.exc 2.0 Km,complete, all specified and directed.

Demolition and breaking up 150 mm dia bore (PVC/salt glazed stoneware drain pipe) including PCC packing under haunching against the sides of pipe bed and complete PCC of bed and removal of debris to a distance exc 1.0 Km but n.exc 2.0 Km, complete, all specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 100 mm bore, after they are laid and tested, complete, all as specified and directed..

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the side of salt glazed stone ware pipe 150 mm bore, after they are laid and tested, complete, all as specified and directed.

Supply, laying, jointing and testing for 150 mm bore class ‘A’ salt glazed stone ware drain pipe (ISI Marked) of approved make laid in trenches jointed in CM 1:1, complete, all as specified and directed.

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors, complete, all as specified and as directed

S&F PVC (SWR) pipes 150mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors, complete, all as specified and as directed

Demolition of precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc, complete, all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete, all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm well graded stone aggregate in foundation filling and mass concrete, complete, all as specified and directed.

M&L for precast concrete solid block masonry (1:3:6) type C-1 using 20mm well graded stone aggregate straight or curved on plan exc 6M mean radius exc 10cm in width and built in Cement Mortar (1:6), complete, all as specified and directed.

M&L for PCC (1:2:4) type B2 using 40mm well graded stone aggregate in surface channel drains, complete, all as specified and directed.

M&L for Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, mould, mitred/stopped ends etc. complete, all as specified and directed.

Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition, complete, all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete (1:2:4) type B-1, using 20 mm well graded stone aggregate and setting in cement mortar (1:6), complete, all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors, complete, all as specified and as directed

S&F in repair PVC (SWR) Plain bend 110 mm dia, of any radius with rubber ring joints, complete, all as specified and as directed

S&F PVC (SWR) Plain bend 75 mm dia, of any radius with rubber ring joints, complete, all as specified and as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete, all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm, complete, all as specified and directed.

S&F in repairs , first quality , Wash basins, vitreous china, white, flat back of size 550x400mm , including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete, all as specified and directed. MAKE :- Wash basin : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA

Supply and fix, Vitreous China wash down water closet EWC (pedestal pattern), standard size , white (including fixing bolts, flushing cistern and flush pipe), plastic seat and cover white, closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs, and removal of old from site, complete, all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA

Supply and fixing in repair of existing water closet (squatt pattern) and foot rest with vitreous china (white) first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap , complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA..

S&F PVC valveless, syphonic action type, flushing cistern, 10ltr capacity low level, white, with inlet, ball valve, float and handle including brackets, complete, all as specified and directed.

S & F in repairs Vitreous China Half stall type urinals, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe), complete, all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA

Dismantling of tiles of any discription and in any position and laid in cement mortar in floor/wall etc, complete, all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm well grade stone aggregate as in sub base floor, complete, all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar (1:4) on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite, complete, all as specified and directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles, complete, all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but EXCEPT STONE, complete, all as specified and directed.

M & L for providing precast cement concrete Type C1 (1:3:6) using 20mm well graded stone aggregate and set in cement mortar (1:6) as bond stone, complete, all as specified and directed.

M & L for providing cement concrete Type C1 (1:3:6) using 20mm well graded stone aggregate as in coping, complete, all as specified and directed.

M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar (1:3), complete, all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash, complete, all as specified and directed.

Taking down cement plaster in cement mortar on brick or stone walls / ceilieng etc. including raking out joints, hacking for key, scrubbing down with water etc,complete, all specified and directed.

M&L for rendering 15mm thick in Cement mortar (1:4) on fair faces of brick works or concrete surface finished even & smooth without using extra cement, complete, all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete, all as specified and directed.

Dismantling of barbed wire fencing any type, complete, all as specified and directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Hard / dense soil,complete, all as specified and directed.

M & L for cement concrete Type D2 (1:4:8) , 40mm well graded stone aggregate) as in foundations, filling and mass concrete, complette, all as specified and directed.

M & L for cement concrete Type C2 (1:3:6),40mm well graded stone aggregate) as in foundations, filling and mass concrete,complete, all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shaps as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, complete, all as specified and directed

Fixing only old servicable retrieved mild steel work obtained from dismantling of post or struts as in posts and struts in fencing including cutting tops to shaps as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, complete, all as specified and directed..

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia ,barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, complete, all as specified and directed Note : Each line of wire shall be measured.

Restraining, resecuring including making good staples etc. of galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying any crossings with provn of MS wire staples or steel pins etc, complete, all as specified and directed. Note : Each line of wire shall be measured.

M&L for two coats of synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth , complete, all as specified and directed.

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint). , complete, all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 36973.00 for old Materials as per Schedule of Credit.

Kusan Enterprises

M/S SHIV NATH ENTERPRISES

M/S SANTOSH KUMAR