Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.5 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹45.4 L+₹2.0 L (4.64%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹46.5 L+₹3.2 L (7.30%)Rejected-Finance NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹46.9 L+₹3.5 L (8.04%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹47.8 L+₹4.4 L (10.1%)Rejected-Finance 956 2 CHANDERSEKER ENTERPRISE OPP MARICAR HOSPITAL OLD CCS JUNGLIGHAT SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹43.4 L
EMD Value
₹86,800
Closing Date
26 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo Port Blair
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
ADDITION / ALTERATION TO BUILDING NO P-105 E BLOCK IN FRONT OF DHQ-14 AT COAST GUARD AREA UNDER GE HADDO, PORT BLAIR
2022_MES_567779_1
8700/GE/H/PB
Open Tender
Civil Works
Item Rate
180 days
GE Haddo Port Blair
CLASS D AND CATEGORY a (i)
9 documents required · 9 mandatory
₹500
GE Haddo
₹86,800
Yes
31 Jan 2023
7 Dec 2022
2 Jan 2023
7 Dec 2022
26 Dec 2022
21 Dec 2022
8 Dec 2022 - 16 Dec 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar complete all as specified and as directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed.
All as per item No 04 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed.
M & L for providing 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finishing the surface of concrete topping even and fair without using extra cement, complete all as specified and as directed
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for 16 to 18mm thick granite slab (of approved shade), machine cut, as in floors, vertical surfaces, steps (treads/risers), cooking platform, window cills / jambs etc and the like laid over cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding (chamfering) the edges complete all as specified and directed. NOTE : Colour of granite shall be as approved by Engineer-in-Charge.
Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified.
M&L for anodised aluminium powder coated snap grid frame work for ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 1991, including cutting, drilling, jointing etc complete including hangers 6 mm dia. G.I. wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down shutters of any description, area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.
Taking down Aluminium Windows chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.
Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each complete all as specified and directed.
S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and as directed.
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening complete all as specified and as directed.
S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified
S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in lintle upto 1.5m clear span, steps, bed plates, kerb and coping including necessary formwork complete all as specified and directed.
S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, fixed n repairs complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.
S&F Second class hard wood plain fillets rectangular or triangular section wrought fixed screws exc 13 Sqcm and n.exc 25 Sqcm complete all as specified and as directed.
M&L for HDF boards (fire & water proof) of 19mm thick as in CB, cabinet, shelves etc & the like with and including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surface complete all as specified and as directed.
S&F auto hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets,CB , Shelves etc complete all as specified and directed.
S&F 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F extruded aluminium anodised 100mm long hasp and staple, safety type incl bolt to hinge plate and fixed with screws complete all as specified and directed
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 40mm (when open) complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and as directed.
M&L for powder coated anodised aluminium partition, window and door/ventilator with frame and shutters fully or partly glazed, sliding/openable/fixed fully glazed and panels fixed with panels inserts 12 mm thick pre-laminated particle board/sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, roller for sliding windows, locking arrangement, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts etc. The size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I complete all as specified and as directed. NOTES: (i) Supply only floor spring, glass, Imax hinges, SS friction hinges, particle board, aluminium fly proof mesh will be measured and paid separately under relevant items of this BOQ. (ii) Weight of aluminium section only shall be accounted for the purpose of payment. However unit rate quoted shall be deemed to include for cost of rubber beading, neoprene packing, fittings such as handles, butt hinges, tower bolts, rollers for sliding windows, locking arrangement and fixing only of panel inserts of glass/ particle board/aluminium fly proof mesh etc. (iii) Weight of aluminium handle, butt hinges, tower bolts shall not be accounted for payment purpose.
SUPPLY ONLY 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply only 4.0 mm thick figured glass, pin head type and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.
S&F brass 300mm, long ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and directed.
Supply only aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
Supply and fix aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
S&F anodised aluminium grill of approved pattern, anodised powder coated, cut to required size and shape, fixed in position with aluminium beading & frame made of aluminium F-section fixed to aluminium windows/ventilators complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan- necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed
S&F for 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.
S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.
S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified.
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.
S&F for 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 75 mm dia PVC (SWR) bends of any radius complete all as specified.
S&F for 75 mm dia PVC (SWR) bends with acess door of any radius complete all as specified.
S&F PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia complete all as specified.
S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia complete all as specified.
S&F PVC (SWR) vent cowl, 75mm dia complete all as specified.
M&L in repairs PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.
S&F in repairs vitreous China wash hand basin, white, flat back, size 550mm x 400mm with pedestal including brackets, 32mm dia waste coupling brass chromium plated, PVC waste pipe of suitable length, chain and plug, fixed complete all as specified and as directed.
S&F in repairs 15mm dia pillar taps, Cast copper alloy, chromium plated, fancy type screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-50H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down for iron pipe or for brass fancy for CP brass fancy type 15mm dia complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-08H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F two way bib cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-12H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-10H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F in repairs vitreous China, wash down water closet pan (pedestal pattern), white with trap including connecting to drains, PVC sheet cover, flushing pipe, antisyphonage pipe, fixing bolts and connecting to existing flushing cistern and making good disturbed surfaces to match with suroundings, fixed complete all as specified and as directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and connecting to WC, fixed complete all as specified and as directed.
S&F in repairs towel rack, brass, chromium plated with with lower hanger stainless steel with hook complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-12 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
S&F towel ring (square), brass, chromium plated with round flange, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-11 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
S&F toilet paper holder, brass, chromium plated, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-38 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
S&F soap dish holder, brass, chromium plated, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-45 or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F health faucet, brass, chromium plated with 8mm dia, 1.0 m long flexible tube, screwed for iron pipe or for brass ferrule 15mm dia or bore fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-41 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
S&F for 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints laid in trenches and in floors etc using synthetic rubber adhesive cement solvent complete all as specified.
Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.
S&F PVC cabinet of size 61cm x 41cm x 10cm with 4mm thick mirror of size 60 x 40cm, with shelves fixed to wall with screws and raw plugs, complete all as specified and as directed.
S&F in repairs 1mm thick stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, overall size 915 x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified an directed.
Drilling holes with drilling machine for bolts, gas pipes, etc., not exceeding 25mm dia, each hole of 10cm depth complete all as specified and as directed.
S&F in repairs 20 to 25mm dia Harrison rails (curtain rails), powder coated, anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all as specified and as directed.
S&F aluminium wardrobe hooks (single) 50mm to 60mm, fixed in repairs complete all as specified and as directed.
S&F Plate Rack of stainless steel of size 31"x36"x10" with steel shelves, partitions & hanging arrangements for utensils complete all as specified and as directed. MAKE: PRAYAG Cat part No. P-348 or equivalent in JAQUAR/PARRYWARE
S&F corner glass shelf with brackets, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-44 or equivalent in JAQUAR/PARRYWARE
S&F concealed stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup screwed down, screwed both ends for iron pipe or for unions, complete all as specified and as directed. MAKE: PRAYAG Cat part No. 7318 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
S&F in repairs chromium plated over head shower dia 130 mm overhead shower round with revolving joints (with body rotation) & 225mm long arm shower with rabit cleaning system and all fittings, complete all as specified and as directed. MAKE: PRAYAG Cat part No. BS-76 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 25mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
S&F 20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.
S&F 25mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.
S&F 25mm dia UPVC gate valve fixed with CPVC / UPVC pipes of both ends fixed in repairs complete all as specified and as directed.
M&L for Cutting chases in PCC block masonry walls, for shelves, lintels, edges of landing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 1000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed.
S&F in repairs 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe complete all as specified and as directed.
S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified and directed.
S&F for pre painted Galvalume aluminium zinc coating GI based corrugated / trapezoidal steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.
S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws complete all as specified and directed.
Dismantling of wrought iron or mild steel work and structural steel work of any description or otherwise provided for complete all specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410 (grde E-165) complete all as specified and as directed.
S&F in repairs for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering and including dismantling of old wind tie complete all as specified and as directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed
M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.
Demolition of cement concrete of any description and in sunken floor /roof padding etc not otherwise specifically provided for complate all as specified and directed
Roughening to old concrete floor surface by hammer and cleaning by picking, sweeping clean and washing down with water to remove dust etc. comlete all as specified and directed
Material and labour for providing PCC 1:2:4, type B0, using 12.5 mm graded stone aggregate as in sunken floor/ roof padding and similar work including water proofing compound all as specified and directed. Note :- WPC shall be measured and paid separately as supplied only.
M&L 10 mm thick Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 3% by weight of cement shall be carried out as specified. (Note : WPC shall be measured and paid separately)
M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof, sunken slabs, edges and vertical surfaces complete all as specified
M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed.
Supply only water proofing compound.
Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.
M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.
Providing precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4) complete, in walls complete all as specified and directed.
M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge.
M & L for hardcore of gauge exc 63 mm but n.exc 100mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders complete all as specified and directed,
M&L for PCC (1:3:6) type C1 (20mm graded aggregate) 75mm thick as in plinth protection with even and smooth finishing without using extra cement complete all as specified and directed.
M&L for PCC (1:2:4) type B2 (20mm graded aggregate) as in surface channel, drain and benching of manhole with even and smooth finishing without using extra cement complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.
M&L for rendering in two layer i.e.5mm thick in CM 1:4 including with or without mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.(Note WPC shall be measured and paid separately)
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
Taking down of damaged, loosened cement concrete/cement mortar in walls and similar structural members up to depth of 20mm to 40mm, cleaning the dismantled portion with wire brush etc remove dust , dirt and other foreign particles etc., and washing with water with pressure and applying bonding slurry coat on old concrete surfaces all as specified and as per manufacturers instructions, Over prepared surfaces provide 20mm thick high build polymer modified cement sand mortar (1:2.5) mixed with 10 litres (minimum) Nitobond SBR per 50 kilograms of cement of M/s FOSROC Chemical (India ) Pvt Ltd or equivalent in Dr. Fixit or Harjas Coatings & Polymers including necessary scaffolding up to 15 m and including match the existing shade of surface complete all as specified and directed
M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.
M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).
M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying with 3mm average thick wall care putty and applying two coats of acrylic emulsion distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. complete all as specified.
M&L for preparing old plastered surfaces of ceilings and complete removal of existing treatment by scrapping, washing, cleaning etc and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes etc. with cement putty complete all as specified.
M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).
M&L for preparation of old wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down fuse Unit/DBs with MCB/MCCB 415 Volt/230 Volt
Taking down light fittings of any type complete all as directed
Taking down old sub main wiring of any size and any type.
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor, drawn through and including rigid non metallic PVC conduit of suitable size (not less than 25mm dia) medium grade and conduit accessories concealed in walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for Make of wire : Polycab / Gloster / Anchor / Havells / Finolex / Anchor Make of PVC Casing & Caping : Modi / Precision / Supreme / Finolex / Polycab
ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on independent board.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board with other switches.
ONE BELL point controlled by one, one way 6 Amps switch.
M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.
S&F modular switch, one way, one module, single pole, 6 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular switch, one way, one module, single pole, 16 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular socket outlet, multipurpose, 3 pin, 16 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular socket outlet, multipurpose, 3 pin, 6 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular bell push, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F AC starter switch of capacity 25 Amps working on 240 Volts, AC supply suitable for split type airconditioner complete all as specified and as directed. MAKE: CRAB TREE Cat part No. ACAO252504 or equivalent in ANCHOR/HAVELLS/L&T
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed.
S&F electric bell, single pole working , AC, 230 volts complete all as specified and as directed. Make : Roma (Anchor)/ Legrand/ Siemens/ Havells
Taking down carefully old unserviceable ceiling fan of 1200mm sweep deposit to MES Store yard under AGE E/M Haddo and S&F new ceiling fan of 1200mm sweep, 220V, 50Hz AC supply, metallic body 5 star rated including providing of twin core copper wire 23/0.0076 from ceiling fan to ceiling rose complete all as specified and as directed. Make : CG (Model No : Briz Air Deco or equivalent make of Havells/ Bajaj / Usha
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make:Roma (Anchor)/Legrand/Simens/Havells
Taking down carefully old unserviceable exhaust fan of 300mm sweep deposit to MES Store yard under AGE E/M Haddo and S&F new exhaust fan of 300mm sweep, metallic body with louvers including all fixing arrangement complete all as specified and as directed. Make : CG (Model No : Drift Air 12" / Orient/ Usha
S&F of LED tube light fittings with 20 watts (Warm White/ White Colour as per requirement of site complete) light source in integral module with polycarbonate / Acrylic diffuser more than 85% efficiency of light with LED lamp efficacy as 110 Lum/W THD < 15% with operating voltage range 150-300V, 50Hz with driver efficiency > 85%, surge voltage withstand 2.5KV, Power factor > 0.9, energy efficient fitting surface mounted including connecting up with two/three core cable complete all as specified and directed. Make : Luker/ Havells/ Philips/ Crompton Note : Quoted rate is inclusive of any other misc materials required for fixing new fittings.
S&F LED light fitting of capacity 10 watts (Warm White/ White colour as per requirement of site complete) with aluminium extruded channel finished in anodised, Class I power factor >0.9 pre wired with electronic driver high translucent frosted PMMA diffuser for glare free smooth lighting distribution surface mounted complete all as specified and directed. Make : Luker (Cat Part No : LT510P) / CG (Cat Part No : CCL-102-10-65-SL-DP-NHW 2ft) / Philips Cat Part No : Astra Line 2 Ft or equivalent make of Havells
Taking down carefully old unserviceable water heater of capacity 25 Ltrs and refixing the same with painting of two coat of synthetic enamel paint and any minor complaint rectified all as specified and directed by Engineer-in-Charge.
S&F recessed mounted 15 watts, LED ceiling light fitting, yellow/White colour, round / square shape (Warm white/ warm colour as per requirment of site complete) made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/ grid ceiling complete with separate electronic driver complete all as specified and directed. MAKE: PHILIPS (Model No. Astra Max Metal Panel) / CROMPTON GREAVES (Cat Part CDR-205-15-57-SL-NWH) or equivalent make of HAVELLS/Luker Note : The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.
Taking down and refixing light fitting all as specified and direcetd
M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
S&F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated including taking down old unserviceable DB of any type/ rating and making good disturbed surface complete all as specified and directed. Make : Indo Asian /Havells/L&T/Legrand
Supply and Fixing 4 pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed Make : Indo Asian /Havells/L&T/Legrand
S&F MCB DB, SPN, 8-way, vertical type, double door, 240 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ HAVELLS
S&F MCB, SPN, "C" series, 230 volts, 40 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ HAVELLS
S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ HAVELLS
M/s Kamal Electrical
SKV Engineering
V KARTHICK
CHANDER SEKER ENTERPRISE
CITY CONSTRUCTION COMPANYU
M/s Ramesh Lal
CARTWHEEL CONSTRUCTION
DEEPAK AGENCIES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .