REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION AND CONNECTED WORK IN MD ACCN OF ZONE-III UNDER AGE E/M-II OF GE(S) MEERUT CANTT

Amount

Taking down carefully any type of battens or conduit point wiring without batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .

Taking down carefully any type of battens or conduit point wiring with batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One tube light/Bulb/Bell point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 3.00 here -in- before but for One ceilling /exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 3.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 3.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 3.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Bulb /Tube light / bell point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 8.00 here -in- before but for One ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 8.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 8.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 8.00 here -in- before but with 2.5 Sqmm Nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix switch piano flush type, 05/06 Amp single pole, one way 240 volts complete all as specified and directed .

Supply and fix socket outlet 5 pin, 05/06 Amp flush type 240 volts complete all as specified and directed.

Supply and fix switch piano flush type, 15/16 Amp single pole, one way 240 volts complete all as specified and directed.

Supply and fix socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed .

Supply and fix switch bell push flush type, 5 Amp, 240 volts complete all as specified and directed.

Supply and fix door bell ding dong type, 240 volts AC complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified and directed .

Supply and fix lamp holder (Angular/Straight), insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix decorative LED tube light fitting 1x20 Watt, with opal diffuser, environment friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material complete all as specified and directed. Make :- Havells Model No-Photon Ultra 1213T-8SSTL20WLED865SPC+STREAK8UPTDIX22WSSBSWH, Crompton CAT NO DMLN1LT8-16, LT-8-20-865-2/Bajaj/Philips

Supply and fixing LED tube light fitting 1x10 watt for mirror light surface mounting, white powder coated CRCA sheet housing with opal diffuser and decorative end plates. Inluding tube rod complete with acessories all as specified and directed Make-Havells Cat No-BS9WLED865SPCWH/CROMPTON LCTL-9-CDL /Philips CAT No BN021LED10S.

Supply and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 Watt, complete with all acessoires all as specified and directed. Make :- Havells HEXAFT10WLED/Crompton Model LBHP-10CDL or equivalent in Bajaj

Supply and fixing recess mounting LED 2x2 luminaire 36 W CRCA powder coating housing with anti-glare duffuser inluding all acessories all as specified and directed by Engr-in-Charge. Make-Crompton Model No-CCR-127-36-57-SL-NWH/Havells Model Endura Slim or equivalent in Philips/Bajaj

Supply and fix of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed .

Supply and fixing LED lamp 9/10 watt Make:- Havells Ordering Code LHLDEBHEMD8X010 or equivalent in Philips/Bajaj/ Crompton

Supply and fix in repairs round surfaces mounted LED panel light 6 watt with aluminium housing and frosted cover complete all as specified and directed Make- Crompton Model LCDSPLN-R-06 CDL or equivalent in Havells/Bajaj/Phillips

Material and labour for sub main wiring with 2x4.00 Sqmm nominal cross sectional area (two single core cable of 4.00 Sqmm for phase and neutral + o1 single core cable of 4 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4.00 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/fittings, brass screws, washers etc and connected to common earth dolly including taking down unserviceable sub main / service main wiring including all cutting/chases etc in wall, making good to walls etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. (Note : One meter of conduit along with 2x4.00 sqmm wire and one 4.00 sqmm earth wire shall be measured as one RM length.)

All as per serial item No 28.00 above but by using two single core cable of 6.00 Sqmm for Phase and neutral + 1 single core cable of 6.00 Sqmm for earth wire complete all as specified and directed.

All as per serial item No 28.00 above but by using two single core cable of 10.00 Sqmm for Phase and neutral + 1 single core cable of 10.00 Sqmm for earth wire complete all as specified and directed.

All as per serial item No 28.00 above but by using four single core cable of 6.00 Sqmm for three Phase and neutral + 1 single core cable of 6.00 Sqmm for earth wire complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, two core cable flat or circular and connection complete all as specified and directed.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as directed .

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed . Make:- Legrand Cat Part 6077 10 or equivalent in ABB/ Schneider / L&T

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified directed . Make :-Legrand Cat Part 6077 11 or equivalent in ABB/ Schneider / L&T.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way with 200 Amps rated copper bus bar and IP-43 & IK 09 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed. Make:- Legrand Cat Part 6077 12 or equivalent in ABB/ Schneider / L&T

Supply and fixing MCB, SP, AC, 240 volts of 06 to 32 Amp capacity "B" series and making connections complete all as specified and directed. Make :- Legrand Cat Part 4085 87 to 95 or equivalent in ABB/ Schneider / L&T.

Supply and fixing MCB, DP (double pole), AC, 240 volts 40 to 63 Amp capacity 'B' series, 10KA and making connections complete all as specified and directed. Make: - Legrand Cat Part 4086 37 to 39 or equivalent in ABB/ Schneider / L&T.

Supply and fixing sheet metal enclosure, triple pole and neutral AC, 415 volts, 04 way, with 200 Amp rated copper bus bar and IP - 43 and IK 09 protection including provision of four pole MCB as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed. Make Legrand Cat Part 6077 15 or equivalent Make of ABB/ Schneider / L&T.

Supply and fix MCB 4 pole 'B' series 100 Amps capacity AC 415 volts, 10 kA complete all as specified and directed. Make :-Legrand / ABB/ Schneider / L&T

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with and including 125 Amp G frame MCCB Make Havells Cat No IHLGHF0100 or equivelent in Legrand/Schneider/Seimens with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing surfaces complete all as specified and directed Make :- Havells Cat No DHDLVDRWGOFO12 or equivalent in Legrand/Schneider/Seimens.

Supply and fixing of MCCB 100 Amp 4 pole , 415 volt , 25 KA breaking capacity, adjustable thermal and magnetic setting complete all as specified and directed. Make :- Havells ,/Schneider/Seimens/L&T.

Supply and fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed. Make Legrand Cat Part 6077 10, Hager Cat No VYS04D or equivalent in ABB.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Note: After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt.

Taking down /out carefully under ground cable of any size complete all as specified and directed

Supplying, laying, commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

All as per item No 46 But size 16 Sqmm 2 core complete all as specified and directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m in depth and getting out in soft/loose soil complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous fly ash brick for cable protection with width equal to the length of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply ,laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed Make- TATA/Jindal/Swastik

All as per itme No 51 Here-in-before but of size 40 mm bore complete all as specified and directed.

Returning, filling in soft / loose soil , including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soils to a distance not exc 50 mtrs and deposited where directed at a level not exc 1.50 m above the starting point complete all as specified and directed.

Supply and fix in repair, security light brackets 32 mm dia GI pipe medium grade upto 1.0 mtr long bend to shape at 100-120 degree including flat iron clamps and suitable nuts and bolts grouted in wall including all material required for fitting, including matching the surface with existing all as specified and directed Make- TATA/Jindal/Swastik.

Supply and fix in repair LED Tube Rod 1x20 Watt suitable for MS batten with retrofit T8 polycarbonate tube -01 No, complete with all accessories including making connection and alteration in wiring as required complete all as specified and directed . Make Havells / Crompton /Philips/Bajaj

Supply and fix in repair LED PL-L lamp , 4 pin , 18 watt, suitable for installation in existing lamp holder complete all as specified and directed. Make-Havells Cat No Photon Ultra PL-L / Crompton / Bajaj .

Supply and fixing LED lamp 9/10 watt of make:- Havells Ordering Code LHLDEBHEMD8X010 or equivalent in Crompton/Philips/Bajaj.

Supply and fixing of the switch piano flush type, 05/06 Amp single pole, one way 240 volts in repair works including all necessay items such as screw, nut and bolt, connector , flexible copper wire 1.5/2.5 Sqmm size etc including checking/testing complete all as specified and directed .

All as per item No 59 above but socket outlet 5 pin, 05/06 Amps flush type 240 volts .

All as per item No 59 above but switch piano flush type, 15/16 Amp single pole, one way 240 volts .

All as per item No 59 above but socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts.

All as per item No 59 above but switch bell push flush type, 5 Amp, 240 volts .

All as per item No 59 above but door bell ding dong type, 240 volts AC.

All as per item No 59 above but steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts.

All as per item No 59 above but lamp holder (Angular/Straight), insulated body, with back plate for batten fitting.

All as per item No 59 above but MCB, SP, AC, 240 volts of 06 to 32 Amp capacity "B" series, Make: - Legrand Cat Part 4085 87 to 95 or equivalent in ABB/ Schneider / L&T

All as per item No 59 above but MCB, DP (double pole), AC, 240 volts 40 to 63 Amp capacity 'B' series, 10KA . Make: - Legrand Cat Part 4086 37 to 39 or equivalent in ABB/ Schneider / L&T.

All as per item No 59 above but isolater 4 pole 'B' series 100 Amps capacity AC 415 volts, 10 kA . Make: Legrand Cat Part 6077 10 or equivalent in ABB/ Schneider / L&T.

Supply and fix in repair decorative LED tube light fitting 1x20 Watt, with opal diffuser, environement friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material all as specified and directed. by Engr-in-charge. Make :- Make:- Havells model No-Photon Ultra 1213T-8SSTL20WLED865SPC+STREAK8UPTDIX22WSSBSWH, Crompton CAT NO .DMLN1LT8-16, LT8-20-865-2 or equivalent in Bajaj / PHILLIPS

Supply and fixing in repair LED tube light fitting 1x10 watt for mirror light surface mounting, white powder coated CRCA sheet housing with opal diffuser and decorative end plates. Including tube rod complete with acessories all as specified and directed Make- Havells Cat No- BS9WLED865SPCWH/CROMPTON LCTL-9CDL or equivalent in CG/Philips CAT NO BN021LD10S

Supply and fixing in repairs 25 watts post top light fitting spun aluminium body finished with stove enamed & trasparent acrylic cover, symitrical light distribution with high power LEDs as light source IP 65 protection all as specified and drected.Make Havells Model Ruby/Crompton/Bajaj

Supplying and fixing in repair of decorative wall light fixture made up of polycarbonate suitable for 15 W retrofit LED lamp and including 15 W LED lamp and including all accessoires for fixing of fitting on wall complete all as specified and directed. Make Havells ordering Code LHDL07150099 or equivalent in Crompton /Bajaj.

Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass cover in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed. Make:- Havells Model-Endura Pearl Neo or equivalent in Crompton / Bajaj / Phillips.

All as per item No 74.00 above but capacity 25 Watt. Make:- Havells Model-Endura Pearl or eqvt in Crompton / Bajaj / Phillips.

Supply and fix in repair LED driver suitable for 25 Watt LED security light as per existing make & Model at site complete all as specified and directed

Supply and fix in repair LED driver suitable for 45 Watt LED security light as per existing make & Model at site complete all as specified and directed

Supply & fix in repairs LED driver suitable for 36/42 Watt LED panel light fitting 2'x2' as per existing make & Model at site complete all as specified and directed

Material and labour for fixing in repair pressed steel terminal box 75 mmx75mm, 60 mm deep with 3mm thick laminated sheet on top for mounting switch/socket/regulator incl taking out old box & making good distrubed surface to match the existing complete all as specified and directed

All as per item No 79.00 here in before but size 100x100mm

All as per item No 79.00 here in before but size 150x75mm

All as per item No 79.00 here in before but size 175x100mm

All as per item No 79.00 here in before but size 200x150mm

Manish Enterprises

vibha associates

SIDDHARTH TRADERS

R P G ELECTRONIC REGD