Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹9.3 LAccepted-AOC | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹9.9 L+₹65,053.39 (7.02%)Rejected-Finance R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L-2 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹22,020
Closing Date
28 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
SPL REPAIR OF BLDG NO. T-66 (JCO LIVING) AT 191 FD COY ENGR, ACHINATHANG, UNDER GE KHUMBATHANG
2022_MES_555503_1
80051/95/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
ACHINATHANG
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹22,020
Yes
18 Nov 2022
1 Oct 2022
29 Oct 2022
1 Oct 2022
28 Oct 2022
15 Oct 2022
Amount
Sch "A' Part-I B/R work:- Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
All as per sre item No. 2 here-in-before but except sheeting complete all as specified and directed by Engr-in-Charge.
S&F 0.63mm thick, galvanised, plain mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge ..
Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed with nails to timber frame work as in walls complete all as specified and directed Engr-in-Charge.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work
M&L for Plain fillets of second class soft wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L for Plain fillets of second class soft wood, sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or bradsin lipping complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each.
S&F 2nd class soft wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats
S & F steel window (factory made) with side hung shutter including projecting type hinges, with steel handle and steel peg stay, complete with glazing bar, dovetailed or welded including fly proof shutter including one shop coat of zinc chromate primer and including cutting holes for fixing hold fasts and making good to match with the existing surfaces all as specified and as directed
All as per srl item No. 16 here-in-before but without glazing bar.
Hacking out broken glass (any thickness, size or description) from wooden/metal frames, glazed with putty or fixed with beads all as specified
S&F 4mm thick sheet glass, ordinary quality in squares n exc 0.5 sq.m in each pane glazing with oil putty complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia and with avg width of apperture 1.4 mm fixed with tinned tack or stainless steel staple
S&F in repair stainless steel wire cloth 0.36 mm nominal dia and with avg width of apperture 1.4 mm fixed with tinned tack or stainless steel staple
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section
S&F in repair 25mm dia mild steel (PVC coated decorative fancy type) curtain rod including brackets to hold rod in position ABS finials of approved quality
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge
M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, comp laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.
M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, comp laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified & directed.
M&L for machine cut kota stone slab flooring 22-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.
S & F in repairs for 15 mm CP pillar taps,cast copper alloy fancy type with chromium plated screwed down,screwed for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs Bib taps 15 mm boreCP ,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule complete all as specified and directed by Engr-in-Charge.
M&L for 550x400mm Wash basins, Vitreous China (flat back or angle back type) any size, and 32mm dia brass waste fitting including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe
S&F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to drain and to flushing pipe antisyphonage pipe, PVC (SRW) 'P' trap including making good to floor complete all as specified and dirtected by Engr-in-Charge .
S&F in repair PVC low level valveless, flushing cistern 10 Ltr capacity with inlet , ball valve, float valve and handle & including brackets for fixing to walls and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed by Engr-in-Charge.
S & F in repair 20mm dia Brass chromium plated tubular towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and directed by Engr-in-Charge.
Taking up or down water tubing & connections, including cleaning for re-fixing or removal to store of 20mm bore, complete all as specified and directed by Engr-in-Charge.
S&F 16mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S & F in repair 15mm bore CP Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair PVC connection pipe 15mm size with PTMT nut of length 450mm complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC waste pipe 32mm dia for WHB, urinal
S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement
Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed.
Sch "A' Part-II E/M work:- Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.
M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover complete all as specified. (a) One light /fan/bell point/buzzer point exhaust fan controlled by one nos, one way 5/6 Amps switch.
All as per srl item No 52 here-in-before but One 3 pin socket outlet, 5 Amps, independent board, with cables 1.5 sq. mm size
All as per srl item No 52 here-in-before but one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size
S&F in repair Switch piano, flush type single pole, one way 5 Amp
S&F in repair Switch piano, flush type single pole, one way 15 Amp
S&F in repair socket outlet multipurpose, 2 in 1 3 & 5 pin 5 Amp flush type
S&F in repair socket outlet multipurpose, 2 in 1 3 & 5 pin 5 Amp & 15 Amp flush type
S&F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge.
Taking down existing servicible light fitting and refixing the same complete all as specified and as directed.
All as per srl item No 52 here-in-before but with conductor of size 2.5 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 2.5 sqmm PVC insulated stranded copper conductor Cable.
S&F in repair wall mounted LED lights fitting 1x 20W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F in repair sheet metal powder coated versatile double door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .
S&F in repair MCB SPN 40 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in repair MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in replacement 1100 volts grade heavy duty 6 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs .00 and any other reduction if any from quoted amount.
SONAM ANGCHOK
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .