Water Supply Scheme, Amargarh

Component-1

i) Repair of Existing Machinary 12.50 BHP complete as per specifications

iii) PITC of 4.00mm2 size incoming cable complete as per specifications attached

Repair of Pump Chamber

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Applying priming coat with metal primer on new steel or iron work including preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

White washing 3 coats inside of pump chamber,

Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete. C.I Double air valve (Size 40mm)

Repair of OHSR

Repair of Expension Joints of OHSR Complete in all respects

Providing & Fixing Top Jali & Repair of Man Hole Cover Complete in all respects

Providing & Fixing 100mm i/d SV

Development of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing

Reapair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing

Repair of masonry gate pillaras per standard Drawing

Repair of brick masonry toe wall in 1:5 cement sand mortar with depth 0.90 mtr, C.C. 1:8:16 & 12.5 mm thick cement plaster in 1:4 on both sides and top of toe wall complete in all respects

Providing & fixing pit cover of M.S sheet thick 10 gauge duly I.S.I. marked 3.14x1.13x1.13= 1.00 sqm wt @ 24.70 Kg./ m.=24.70 Kg.

Repair/Painting of existing sign board complete in all respects.

Chlorinator Plant

Providing, Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6 Litres of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS standard specifications.

Repair of Distribution System

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation complete in all respects.

PVC pipe 63mm o/d 6kg cm2

Component-2

Household Connection

Providing MDPE pipe PN 16, 20 mm 2m and G.I Pipe ( as per IS 1239) B- Class, as approved by Engineer Incharge 15mm i/d=2.5 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading and 3" i/d clamp, GM ferrule 15mm ISI mark medium IS 26:92 C.I tap 15 mm i/d including cutting suitable hole in wall and making good of the same for private water connection to individual household.

Component-3

Providing & Fixing New Distribution System

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.6m x 0.6m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.9m x 0.9m

Dismantling and restoration of Road cut (Per Meter)

Brick on edge

CC Flooring