Loading
Loading…
Loading…
| # | Schedule | Awarded To | Bids | Value |
|---|---|---|---|---|
| 1 | Schedule 1 | SILCARB RECRYSTALLIZED LIMITED | 1 | ₹79,200 |
| 2 | Schedule 2 | SILCARB RECRYSTALLIZED LIMITED | 1 | ₹7.1 L |
| 3 | Schedule 3 | SILCARB RECRYSTALLIZED LIMITED | 1 | ₹9.7 L |
| 4 | Schedule 4 | SILCARB RECRYSTALLIZED LIMITED | 1 | ₹3.6 L |
| 5 | Schedule 5 | SILCARB RECRYSTALLIZED LIMITED | 1 | ₹4.0 L |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
24 Jun 2026, 9:00 pmClosed
SILICON CARBIDE HEATERS
9355642
GEM/2026/B/7563683
Two Packet Bid
652-11544,652-M4046,652-M2763,652-M5148,652-M0597,652-M5149
Koraput, Odisha
Item wise evaluation
BOQ
4 documents required · 4 mandatory
Exempted
Yes
24 Jun 2026
1 Jun 2026
24 Jun 2026
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) | Spec |
|---|---|---|---|---|---|---|---|
| 1 | 652-11544 | SILICON CARBIDE HEATING ELEMENT
TYPE- ALPHA ROD(ALPHA ULTRA NON JOINT SINGLE PIECE)
DIA- 22MM(+/-1MM)
OVERALL LENGTH- 1300MM (+/-5MM)
HOT ZONE LENGTH- 650MM (+/-3MM) (MIDDLE SECTION)
NOMINAL RESISTANCE- 1.2 OHMS +/-20%
MIN. DENSITY- 2 GRAM/CUBIC CM
POROSITY- 10-15 %
(ALONG WITH 2 NOS SPRING STEEL H CLAMPS AND 1FT BRAID PER ELEMENT)
MAKE-SILCARB | 18 | Nos | KORAPUT | 90 | |
| 2 | 652-M4046 | SILICON CARBIDE HEATING ELEMENT
TYPE- U-TYPE(ALPHA ULTRA NON-JOINT SINGLE PIECE)
HEATER DIA- 32MM
NO. OF SHANKS- 2 NOS
HOT ZONE LENGTH- 1100MM(+/-5MM)
COLD ZONE LENGTH- 450MM(+/-5MM)
OVERALL LENGTH- 1594(+/-6MM)
DISTANCE BETWEEN SHANKS(CENTRE TO CENTRE)- 85MM(+/-1MM)
DISTANCE BETWEEN SHANK(END TO END)- 117MM(+/-1MM)
MAX TEMPERATURE- 1400 DEGREE. C
POWER REQIUIREMENT- 12KW
NOMINAL RESISTANCE at 1000 DEGREE C 2.5 OHMS(+/-20 %)
MIN.DENSITY- 2 GRAM/CUBIC CM
POROSITY- 10-15 %
(ALONG WITH 2 NOS. OF SPRING STEEL H CLAMPS AND 2 FT BRAID PER ELEMENT)
MAKE-SILCARB | 24 | Nos | KORAPUT | 90 | |
| 3 | 652-M2763 | SILICON CARBIDE HEATING ELEMENT
TYPE- ALPHA ROD(ALPHA ULTRA NON JOINT SINGLE PIECE ROD)
HEATER DIA- 38MM(+/-1MM)
HOT ZONE LENGTH- 1450MM(+/-5MM)
COLD ZONE LENGTH- 400MM(+/-5MM)
OVERALL LENGTH- 2250MM(+/-5MM)
MAXIMUM TEMPERATURE- 1300 DEGREE C
POWER REQUIREMENT- 15KW(APPROX)
NOMINAL RESISTANCE at 1000 DEGREE CENTIGRADE 1.20+/-20 % OHMS
MIN. DENSITY- 2 GRAM/CUBIC CM
POROSITY- 10-15 % ALONG WITH 2 NOS. OF SPRING STEEL H CLAMPS AND 2 FT BRAID PER ELEMENT
MAKE-SILCARB | 42 | Nos | KORAPUT | 90 | |
| 4 | 652-M5148 | SILICON CARBIDE HEATER
TYPE- ALPHA ROD(ALPHA ROD ULTRA NON JOINT SINGLE PIECE)
HEATER DIA- 44MM(+/-1MM)
HOT ZONE LENGTH- AS PER THE DRAWING ENCLOSED
COLD ZONE LENGTH- AS PER THE DRAWING ENCLOSED
NOMINAL RESISTANCE- 0.748(+/-20%)OHM
MINIMUM DENSITY- 2 GRAMS/CUB. CM
POROSITY-(10-15)%
SUPPLIED WITH 2 NOS. OF SPRING STEEL H CLAMP & 2FT BRAID PER ELEMENT
MAKE-SILCARB | 48 | Nos | KORAPUT | 90 | - |
| 5 | 652-M0597 | SILICON CARBIDE HEATING ELEMENT
TYPE- ALPHA ROD(ALPHA ULTRA NON JOINT SINGLE PIECE ROD)
HEATER DIA- 31MM(+/-1MM)
OVERALL LENGTH- 1600MM(+/-5MM)
HOT ZONE LENGTH- 800MM(+/-3MM)(MIDDLE SECTION)
NOMINAL RESISTANCE- 1.2 OHMS(+/-20%)
MINIMUM DENSITY- 2 GRAM/CUB. CM
POROSITY- 10-15 %
(ALONG WITH 2 NOS SPRING STEEL H CLAMPS AND 1FT BRAID PER ELEMENT)
MAKE- SILCARB | 24 | Nos | KORAPUT | 90 | |
| 6 | 652-M5149 | HEATING ELEMENT
FURNACE SPARE PARTS(U-SHAPED ALPHA ULTRA ROD 44 X 960X1450 MM)
SILCARB MAKE SILICON CARBIDE HEATING ELEMENT
ALPHA ULTRA NON JOINT U-SHAPED HEATER WITH SPECIAL OXIDE GLAZE WITH 2 SHANK SYSTEM
SUITABLE FOR SILCARB MAKE BRAZING FURNACE NO.-1784
TOLERANCE- DIA(+/-)2MM
HOT ZONE(+/-)3MM
TOTAL LENGTH(+/-)5MMRESISTANCE(+/-)20%
MAKE-SILCARB | 18 | Nos | KORAPUT | 90 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_9355642.pdf
GEM_BID • 0.13 MB
25sn-1111__specification_2026-05-20-11-12-44_13d4b294c5c31b3bc77a1ba554178d71.pdf
BOQ • 0.63 MB
25sn-1111__boq_2026-05-20-11-12-44_4189de80ab97e16b8774cd79aa7f6bef.csv
BOQ • 0.00 MB
1780281948.pdf
GEM_OTHER • 0.05 MB
NEWATC_0421cbb6-8920-4828-b5e01780282527251_buyer278.halh.or@gembuyer.in.pdf
GEM_OTHER • 3.24 MB
gtc.pdf
GEM_OTHER • 0.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .