Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
31 Aug 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Susen Murmu
Irugur TOP Installation, Bharat Petroleum Corporation Limited
SUBJECT: TENDER FOR SUPPLY OF RESIDUE ON EVAPORATION APPARATUS AT IRUGUR TOP INSTALLATION CRFQ NO 1000391099 DATED ON 08.08.2022 Kindly quote you lowest rate per unit against each item in figures as well in words and your rates are valid for a period of 60days up to 30.10.2022.After successful completion of contract period ,Repeat order shall be placed on mutual agreement. The quoted amount shall inclusive of all rates, taxes and duties but excluding Goods & Service tax will be paid extra as per prevailing rates and policy /rules and regulations. Kindly note that this is an e- tender and bids have to be submitted only online. Your offer is liable to be rejected if there is any deviation from terms and conditions and special conditions of the said tender. Following five documents are uploaded as tender documents. You are requested to sign all documents digitally and upload all documents in the tender without any corrections. Please note that even if a single document is missed while digitally signing uploading; the bid is tantamount to reject. Conditional bids will also be liable for rejection .No changes shall be made in the tender documents and it should be digitally signed and uploaded as it is. Tender Documents 1. Tender Covering Letter. 2. General Conditions of Contract 3. General Purchase Contract 4. Bid Security Declaration During the technical evaluation above parameter of successful digital signing and uploading of tender documents will be checked. Your offer digitally signed on all pages of bid and attached tender documents files should be signed digitally and uploaded in the e- procurement portal of BPCL on or before 26.08.2022 @ 1600 Hrs. BPCL will not be held responsible for any delays due to connectivity issues etc. The rates should be quoted for the specifications mentioned in the tender only and no deviation will be entertained. Any deviation found in the bid; same will be liable for disqualification. You may kindly contact us if in case you need any clarifications before submitting your offer. The Details of
5045
1000391099
Limited Tender
Works
Irugur TOP Installation
31 Aug 2022
9 Aug 2022
31 Aug 2022
9 Aug 2022
31 Aug 2022
9 Aug 2022
TECHNICAL SPECIFICATION OF RESIDUE ON EVAPORATION BATH APPARATUS
Supply & Installation of Residue on Evaporation bath/ Existent Gum Bath as per ASTM D381,
IP-131 & IS-1448(P:29) as per specification given below:
1. It will be a well insulated solid Metal Block type Bath in which outer case will be made of MS duly Powder
coated paint & lid will be made of SS.
2. Number of wells :- 5 wells, Insulated with ceramic fiber (high temperature grade)
3. Heater :- Inconel heater, embedded in aluminum casting.
4. Temperature range: From ambient to 230’C.
5. Temperature controller: Digital temperature controller.
6. Type of sensor to be provided: J type sensor to be provided.
7. Rota meter type Flow meter : Capable of indicating a total flow of air or steam equivalent to
ml/S for each outlet jet when fitted with conical adaptors.
8. Two thermometers as mentioned in P:29 method, Annexure –A
9. Forceps - 2 Nos
10. Air Jet apparatus:- A total reading on a flow indicator corresponding to 600 ml/S +/- 90 ml/S at each
outlet will ensure a flow rate of 1000 ml/S +/- 150 ml/S at a temperature of 155˚C +/- 5˚C
provided that the pressure at the outlet of the flow indicator is not more than 34.5 k.Pa
11. Pressure gauge: To be provided in the range of 2.2 Kg/cm2.
12. 100 ml beakers (10 Nos)
13. Extra fittings: So as to fix instrument with existing air pipe fittings in Irugur QA laboratory, suitable fittings
would be provided.
Safety Features
1. All electrical fittings shall be with fire proof wiring.
2. To prevent over heating in the event of primary controller failure, a high limit elelctronic lock shall be
provided to interrupt power to the bath beyond a temperature of 120 deg C.
3. Sufficient insulation to be provided to avoid electrical shocks and hazards.
General terms & Condition
1. The supply and installation of ROE bath to done at
BPCL IRUGUR TOP INSTALLATION,
RAVATHUR P.O., IRUGUR VIA,
2. The payment will be made after successful supply & installation of subject item. The bill should be
addressed to Business Process Excellence Centre (BPEC) 4th Floor, BPCL Office Complex Plot No.
Sector – 2, Behind CIDCO Garden, Kharghar, Navi Mumbai - 410 210 with a copy to us.
3. Payment will be released through NEFT directly to the Vendor's account.
4. BPCL reserves the right to modify /cancel in full or part/extend due date without assigning any reasons
at their discretion and contractors have no right seeking reasons for such actions by BPCL.
5. BPCL reserves the right to terminate the contract (in part or full) before its expiry without giving any
reasons at their discretion and the contractor will not have any right for any claims/damages with BPCL
on account of this. Contractor is fully responsible for any consequences/loss/liabilities/risks solely in case
the contract is terminated before expiry of the contract period. The equipment should be complete in all
respect and instrument should be ready to use. In case of the instrument being non-operational for want
of spares or accessories not mentioned in the offer, the vendor shall have to supply the same and bring
back the instrument in working condition without any charge whatsoever.
6. Party shall provide any pre-installation requirement before delivery for smooth commissioning of the
7. Party shall install and commission the instrument within 90 days from the date of issue of LOI to him.
8. Party shall supply, operation and maintenance manual including that of the controller.
9. Party shall provide 24 months warranty to the supplied instrument and spares from the date of successful
commissioning at BPCL site (QA laboratory, BPCL Irugur TOP Inst., Coimbatore, TN).
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
5045.pdf
pdf • 2.28 MB
BUDGETDOC_5045.pdf
pdf • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .