REPAIR MAINTENANCE OF FLOORING ROOF COVERING PLASTERING SEWER LINE JOINERY AND OTHER MISC WORKS ITEMS TO EM INSTALLATIONS AT AFS CHAKERI KANPUR

Amount

M & L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) including WPC complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Demolition of cement Concrete of any description over roof slab complete all as specified and directed.

M & L for 25mm thick cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate mixed with WPC @ 3.00 % by weight of cement complete all as specified and directed. Note:- WPC shall be measured & paid separately.

M & L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinde complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M & L for 20mm thick Screed bed or bedding layer in CM (1:6) for laying floor tiles, complete all as specified and directed.

M & L for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed in neat cement slurry with grey cement and no pigments, in floors, cut and polished complete all as specified and directed.

M & L providing, cement concrete in roof type B0 1:2:4 using 12.5mm graded stone aggregate for copings, kneelers, apex stones, bed plates, kerbs complete all as specified and directed.

Disconnecting existing tank Capacity exc 1000 & n. exc 2000 ltrs for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L for taking up/removal plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sqm superfical area and not exc one brick depth) using brick bats/aggregate and plastering in cement mortar (1:4) to distributed portion and applying two coats of cement base paint to match the existing surfaces upto 5 mtr height complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for 12mm Seamless calcium silicate ceiling made out of 1800x1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screwes having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (framework for ceiling shall be measured and paid separately) complete all as specified and directed.

M&L 16 mm thick of size 600 x 600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (bevelled tegular) of Armstrong or equivalent make and model including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping, main runner and cross runner and to comprise main tee/runner 15mm x 38 mm size (load carring capacity 14 kg/sqm) spaced at 1200 mm centres securely fixed to the structural soffit and flush fitting 1200 mm long cross tee/runner to be interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm module, cut sub cross tee/runner 600 mm require independent support. Wall angle of size 19 mm x 19 mm, securred to the periphery of the wall at 450 mm maximum centres. The above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aquline wire with suitable fasterners and hook clip complete all as specified and directed.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two channel un equal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centres to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastener with and including ceiling section(not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flanges of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermedite channel at 457mm centre to centre complete all as specified and directed.

S & F for Hanger 6mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed.

Taking down cement of cement lime plaster of any description on brick or stone walls or concrete surfaces etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of Brickwork masonry, built in cement mortar complete all as specified and directed.

M &L Brickwork with fly ash old size bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster (1:4) on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster (1:6) on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surface, finished fair and even complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed.

M&L for applying two coats of white wash including surface preparing of old/new decorated surfaces of walls ( plastered or un plastered ) including cornics etc complete all as specified and directed.

M & L for two coats of white wash on old/new ceilings including preparation complete all as specified and directed..

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornics etc and applying one coat of cement base paint complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornics etc and applying one coat of oil bound distemper, complete all as specified and directed.

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in flooring/plinth protection/sub-base finishing concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface complete all as specified and directed.

M &L 75mm thick P.C.C. 1:4:8 type D2 using 40mm graded stone aggregate as in sub-base under floor complete all as specified and directed.

M & L for 15mm thick Screed bed or bedding layer in CM (1:6) for laying floor tiles etc, complete all as specified and directed.

Material and Labour for chequerred Cement concrete tiles 20 cm X20cm X 25 mm thick, set jointed and pointed in neat cement slurry with mixture of white and grey cement in equal proportion and no pigment complete all as specified and directed.

M&L for 60mm thick PCC M-35 machine pressed precast concrete glazed coloured interlocking pavor block any shape and size confirming to IS-15658-2006 using with grey cement and pigment complete all as specified and directed.

M&L for sand cushioning not exc 25mm thick as filling under floors including watering and consolidation complete all as specied and directed.

Dismantling of AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L fo excavating in post holes (or similar holes) Soft/loose soil each n exc 0.5 cu. m, getting ut, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M & L for 50 mm PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base, floor complete all as specified and directed.

M & L for 100 mm PCC 1:2:4 type B2 (using 40 mm graded aggregate) as in floor finished even and smooth with out using extra cement complete all as specified and directed.

M & L for Plastic dividing strips, 1.5mm thick and 38mm wide complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161 -1979 grade St.-240 complete all as specified and directed.

S&F MS plates/flats angle etc as in cleat gussed plate incl drilling, welding etc complete all as specified and directed.

M&Lpreparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with clue painted at joints complete all as specified and directed.

S & F 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc complete all as specified and directed.

S & F 30 mm thick Second class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered chamfered or rounded, fitted with cut mitered beads for securing class etc complete all as specified and directed.

Supply & Fixing 2nd class hard wood made plain framed panalled door shutter 35mm thick (any number of panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces . The size of rail and stiles as per IS-1003(Pt-I),kiln seasoned and chemically pressure treated etccomplete all as specified and directed.

S & F in opening, solid PVC Frame of size 50mm x 47mm for door made out of 5mm plain colour PVC Sheet reinforced with MS Square tube complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of f20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.

Material & labour PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping/lintel, hold fast, PCC Bed blocks incl finished all exposed surfaces of concrete incl necessary form work etc complete all as specified and directed.

Supply & Fixing MS work as in hold fast etc conforming (Fe-410-0 or Fe-310-0) complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F Butt hinges of 100 mm size, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 125 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 125mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts, ISI marked clip type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

S & F 100mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100mm Butt hinges , Extruded aluminium alloy with galvanised mild steel hinge pin , anodised and fixed,type c-22 complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Butt hinges of 75 mm size,medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 100mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 100mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S & F 250mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repaires PVC valveless, syphonic action type, 10 Ltr capacity, flushing cistern low level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and directed.

M and L fixed in repair Galvanised wire cloth 0.56mm nominal dia of wire and avg. width of aperture 1.18mm with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass any thickness , size quality or description from wooden / steel frame fixed with wooden beads/ metal pinning and supply & fix 4mm thick sheet glass in Squares not exc. 0.5 sqm in each pane fixed with wooden beads or putty complete all as specified and directed.

S&F in repairs 375mm ordinay rat rail rod pattern springs including rooler and roller plate complete all as specified and directed.

S&F in repairs floor door stoper of aluminium alloy body size 150mm complete all as specified and directed.

S & Fixed in repairs wash hand basin vitreous china (flat back or angle back type) size 550 mm x 400mm including necessary accessories complete all as specified and directed.

S & Fixed in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & Fixed in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- Leader/Zoloto

S & Fixed in repairs waste fitting, brass chromium plated sinks/basins etc with long screwed shanks and fly nut flange 32mm dia complete all as specified and directed.

S & Fixed in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed size 15mm complete all as specified and directed.

S & Fixed in repairs pillar tap standard of PTMT any colour high pressure screwed for iron pipe and fixed size 15mm complete all as specified and directed.

S & Fixed in repairs ball valves high pressure PTMT with epozy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed size 50mm dia complete all as specified and directed.

S & Fixed in repairs 32mm dia. PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connecxtions, including cleaning for Refixing or removal to store complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to wals and ceilling or laid in floors in short lengths complete all as specified and directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (walls,cellings, floors etc.) complete all as specified and directed.

S & F in repair vitreous china squatting pan of orrisa pattern of size 580x440mm colour to match the existing surface with P & S trap front of back with intergral foot rest incl connection to trap and to flushing pipe anti syph pipe etc complete incl making good to match complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 250 & n.exc 500 ltrs and from mouths of circulating pipes, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Dismantling damage/broken water tanks exc 250 and n.exc 500 ltrs and provision of 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling of stone slab and tiles of any type , any description or thickness laid bedded and pointed in any mortar as in floors,aprons etc complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding, removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

M & L for Rendering 10mm thick on work or concrete surfaces in cement mortar 1:4 for backing of Dado/Skirting complete all as specified and directed.

M & L for 15mm thick screed screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for 18-20 mm thick machine cut Kota stone on vertical surfaces,skirting etc set& jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

M & L of 20 mm thick machine cut granite stone slab BLACK & RED (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for coloured glazed ceramic tiles of 300x200x7mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white coloured cement to match complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for coloured Non- skid ceramic tiles 7 to 8mm thick (Square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white coloured cement to match complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Demolition and breaking up drain pipes ( SGSW, AC or reinforced concrete ) set in cement mortar for 150 mm internal dia of pipe complete all as specified and directed.

M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm dia in PCC 1:3:6 type C2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for SGSW drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection/sub base , finish even & smooth without using extra cement complete all as specified and directed.

M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed.

M & L for brickwork with fly ash old size bricks in one brick thick honey-comb walling built in CM (1:6) complete all as specified and directed.

M & L for PCC1:2:4 Type B 1 (using 20 mm graded aggregate) in copings incl finished all exposed surfaces of concrete incl necessary form work etc complete all as specified and directed.

Demolition of RCC in floors(other than ground floors beams,chajjas,landing slab and similar suspended works complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1 as in cover slab or similar works set & jointed in CM 1:4 complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L loose filling with aggreagate of broken bricks , gauge n.exc 80mm to 150 mm in soakage pit/ sokage wells complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point . complete all as specified and directed.

Taking down and removing aluminium chowkats of frames not exceeding 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

M & L for 50 micron thickness powder coated aluminium sliding windows with double shutter, triple channel with 5mm thick tinted glass and stainless steel wiremess with glazed clips, rubber beading and with roller, locking plate etc complete all as specified and directed.

M & L for powder coated aluminium grill DG 104 pattern 5.5 mm thick with F channel complete all as specified and directed.

S&F in repair aluminiun (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Taking down rolling shutters of any description not exceeding 10 Sq.m area straightening of certain springs, guide channel hood cover, etc and refixing the same in the original position including greasing/oiling i.e complete servicing to make the shutter fully functional to the entire satisfaction of Engineer-in- Charge complete all as specified and directed.

Taking down rolling shutters of any description exceeding 10 Sq m but not exceeding 20 Sq.m area strainghtening of certain springs, guide channel hood cover, etc and refixing the same in the original position including greasing/oiling i.e complete servicing to make the shutter fully functional to the entire satisfaction of Engineer-in-charge complete all as specified and directed.

Supply and fixing in repair for curtain built up of interlocking lath sections of any size and description shall have a distance of 75 mm between rolling centers formed cold rolled steel strips of 1.2 mm thick with interlocking curls at both edges and deedp corrugation at the centre with a bridge depth of not less than 12 mm to provide sufficient curtain stiffness including one coat of synthetic emanel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Supply and fixing in repair for guide channel made up of mild steel deep channel section not less than 3.15 mm thickness. Depth of guide channel should be 65 mm and width should be 25 mm for the lath section and there should be a clearance of 10 mm between the guide wall and the end clips of the curtain . Each guide channel shall be provided with a minimum of three fixing cleats as per the site requirement and spacing of cleats should not exceed 0.75m. The projecting fashion of guide channel should be embedded in grooves and channel should have a box welded on at the bottom to conceal the end of the sliding bolt when fixed on side complete all as specified and directed.

Supply and fixing in repair of fabricated lock plate of riveted construction of any size and description made up of mild steel sheet not less than 3.15 mm thickness supported with steel angle or Tee section as per existing site requirement with sliding bolts made up of flat iron 40X6 mm hand made type provided at the either ends to engage with suitable receiving pockets at the bottom of the guide channel and pulling handle hand made type made up of flat iron 25X6 mm complete all as specified and directed.

Supply and fix in repair of bracket plate of any size and description made up 3.15mm thick mild steel plate with "U" clamp and stopper made up flat iron 40X6 mm and welded to the appropriate place complete and fixed to wall with foundation bolts at the required height complete all as specified and directed.

Supply and fix in repair of roller made of heavy duty 40 mm nominal bore cast iron pipe and fixed with nuts and bolt to orm wheel, helical wire springs/rings and beveled gear including necessary nuts and bolts, split pins, holes etc complete all as specified and directed.

Supply and fix in repair of hood cover of any size and any description made of mild steel sheet 1.0 mm thick and fixed with necessary nuts and bolts by drilling to the wall complete all as specified and directed.

M & L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise described complete all as specified and directed.

Supply and fix Fe 410-W (Gde-E- 250) quality-A Fe Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (over duct) complete all as specified and directed.

DHARM ENTERPRISES

KALI CHARAN PANDEY

MD BUILDER