Providing urgent Compound light works at different sites under AE(Electrical) KBN, MTNL, ND

Amount

P/F single phase borewell submersible starter panel (suitable for 1.5 to 2 HP) operation on 230 Volts 50 HZ AC supply with dry run and overload protection on the wall with fixing accessories etc complete as reqd ( Make :-Crompton/L&T/SS)

Replacement/S/F of suitable size pole box made out of polycarbonate thermoplastic enclosure shock proof, rust proof, water proof having internally embedded gasket, fixing on existing GI poles/wall with 2 nos. factory fabricated GI clamps (wherever required)/ pole box fixing arrangement, complete with 1 no. 6 ampSP MCB of approved make and interconnections etc. as reqd. (Pole box make: Sintex)

SITC of 25 to 30W, IP-66, LED street light luminaries having Aluminium die cast housing and clear toughened glass with synthetic rubber gasket, integral gear on existing pole/ bracket suitable for operation on 230V, 50Hz, single phase AC supply complete as reqd. (Make: Surya / Crompton/ Havells / Bajaj / Philips/Syska/Orient/Polycab)

Replacement of existing Gate light with new 25 to 30W LED post-top Gate Light fitting with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source & suitable modification work of existing pole according to the size of above fitting etc and dismantling the old faulty fitting etc as reqd (Make: Crompton/ Havells / Bajaj / Philips/Syska/Orient/Polycab)

SITC of 7 to 9 watt energy efficient LED bollard light fitting(minimum up to 500 mm height (apx ) with LED bulb of 9W) i/c grouting nut bolt in existing foundation etc as required. (Make : Philips / Bajaj / Havells/surya/polycab/SS).

S/L of following sizes PVC insulated and PVC sheathed armoured copper cable and fixing on the wall /existing pipe/laying in under ground etc as reqdMake-M/S poly cab/KEI/Havells/Finolex a)3 c x 1.5 Sqmm copper

b)4c x4 sqmm Copper

Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required. a)3 c x 1.5 Sqmm copper

b)4c x 4 sqmm Copper

Supplying/Laying /Fixing of following size GI Pipe in floor /road i/c cutting of floor /road & repairing the same with CC (1:2:4)etc as per requirement suitable for crossing of required size armoured power cables etc as required. (a) 50 mm dia GI Pipe

Providing and fixing G.I pipe bracket fabricated out of 32 mm dia G.I pipe (medium class) of length 1.5 mtr.bend at an angle of 120 degrees suitable for fixing of existing street light luminaire i/c pdg./ fixing 2 Nos M.S clamps, sufficient nut bolts/fastner on exsiting wall etc complete as reqd.

P/F CC Foundation of size 600 mm x 300 mm of ratio 1:2:4 i/c excavation & plastering works suitable for bollard light etc complete as reqd

P/F busbar box (300 mm x 400 mm apx)fabricated with 16/14 gauge CRCA Sheet i/c P/F of 4 No 25 mm x 5mm Copper busbar with openable cover i/c powder coating painting etc as reqd

Dismantling of old existing pole box, light fittings,cables,GI Pipe,starter panel etc as per site requirement

Less credit for dismantled material (Dismantling of old fittings,cables,GI pipe, submersible starter panel,Light fittings etc are required as per the instruction of engineer in charge)

L K Associate

S.K.Electricals

STANDARD REFRIGERATION CORPORATION