Supply erection and commissioning of New Pump for flood protection works at Permanent pump House RD 107 BSB in Water Service Mechanical Division Rohtak

Amount

Supply, Erection & Commissioning of 10 C/s axial/Mix Flow Water lubricated Vertical Pumps of 10 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. with Y body, including MS Bend including flange welding, SS Nut & Bolts with Staner etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 60 HP, 1440 rpm, 3 Phase, 440 Volt+- 10%, with eficiency class IE2 suitable for fitment with 10 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department

Supply, Erection & Commissioning of 250A fully automatic Star Delta Starter suitable for 60HP motor as one incomer of MCCB (250A) with one no mcb for lighting load , with all allied item like MCCB, Contactor, rating 150 amp,120amp,90amp, all type of protection relays (over voltage, Under Voltage, Over Current, single phasing preventer, delay switch), Power factor correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department

Supply erection and commissioning of LTDB of 400amp capacity including all accessoriesas one incomer of MCCB 400amp with 3 no. outgoing of 250 amp, one no. MCCB 160amp,and one no. MCB 63 amp for light loads like indicators,relays, meter, push button bus bar etc. suitable for operation of 3 no. motors of 60HP and one no motor of 30HP capacity as per as per approved technical specification of department

Supply, Erection & Commissioning of M.S delivery Pipe 341.4 mm inner dia made of 6 mm thick MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)

Supply, Erection & Commissioning of 14 inch DI pipe both end Flanged (in >= 6 Mtr Pieces) K-9 conferming to ISI 15:8329-2000 From delivery bend to delivery point in trench by excavation and filling,Making joint complete with material such as Nut and Bolt &Rubber packing etc. as required on site complete in all respect

Supply, Erection & Commissioning of 10 inch DI pipe both end Flanged (in >= 6 Mtr Pieces) K-9 conferming to ISI 15:8329-2000 From delivery bend to delivery point in trench by excavation and filling,Making joint complete with material such as Nut and Bolt &Rubber packing etc. as required on site complete in all respect

Providing Complete double side plate earthing with 2 Earth Pits on both sides of sump well by boring and lowering 1.5" GI pipe, Filling Boring with Charcoal, copper strips, salt and fixing base plate, connecting this main earthing through copper strips/wire upto motors and panel as per site requirement

Providing and laying of PVC Copper Wire of 50 mm2 as Conf. to IS= 694 &Grade Conf. to IS-7098 (Part-1) 1988 as per approved makes.

Providing and laying of PVC Copper Wire of 25 mm2 as Conf. to IS= 694 &Grade Conf. to IS-7098 (Part-1) 1988 as per approved makes.

Providing and laying LT armoured PVC aluminium Cable of size 120sqmm,3 ½ core confirming IS 7098-1985 as per approved make

Providing & laying LT Armoured PVC aluminium cable of size 185 sq. mm, 3 ½ core conforming to IS 7098 -1985 as per approved makes.

M/s KRP Engineering Pvt. Ltd.