Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.3 LAccepted-AOC | L1 | Accepted-AOC Contract is awarded to M/s B R Anand | |
| 2 | L2₹43.1 L+₹4.5 L (11.8%)Rejected-Finance | L2 | Rejected-Finance Rejected being other than lowest quoted rate | |
| 3 | L3₹43.1 L+₹4.5 L (11.8%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest quoted rate | |
| 4 | L4₹43.2 L+₹4.7 L (12.1%)Rejected-Finance | L4 | Rejected-Finance Rejected being other than lowest quoted rate | |
| 5 | L5₹43.6 L+₹5.1 L (13.2%)Rejected-Finance | L5 | Rejected-Finance Rejected being other than lowest quoted rate |
| Sl No | Description | Qty | Unit | M/s.M G Kulkarni L2 | M/S. M.A. Sharief engineers and contractors L5 | SONU ENTERPRISES L4 | ASHWAMEDH ENGINEERS L10 | M/s kishor M Lalwani L10 | kgn associate L8 | D V Engineers and Contractors Pvt Ltd L6 | M/s S.R lahoti L7 | sunil kaduba dakale L3 | M/S Tirupati Goroba Shendge L9 | B.R.ANAND L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for preparation of old decorated surfaces of walls (plastered or unplastered) by brooming down with coir wire brushing, scrapping down, smoke root, moulds, moss and including filling of cracks/holes by acrylic crack filler, removing unnecessary nails complete all as specified and as directed by Engineer-in-charge | 43,867 | Sqm | 5 ₹2,19,335 | 2 ₹87,734 Lowest | 3 ₹1,31,601 | 3 ₹1,31,601 | 3 ₹1,31,601 | 3 ₹1,31,601 | 3 ₹1,31,601 | 5 ₹2,19,335 | 2 ₹87,734 Lowest | 5 ₹2,19,335 | 3 ₹1,31,601 |
| 2.00 | M&L for complete removal of existing surfaces treatment from old plastered or unplastered decorated wall surfaces, and applying minimum 1.5mm thick wall care putty over prepared wall surfaces including sanding of the putty surface after drying to achieve even and smooth finish for receiving painting complete all as specified and as directed. | 1,500 | Sqm | 50 ₹75,000 | 49 ₹73,500 | 50 ₹75,000 | 45 ₹67,500 | 45 ₹67,500 | 45 ₹67,500 | 48 ₹72,000 | 50 ₹75,000 | 40 ₹60,000 Lowest | 50 ₹75,000 | 40 ₹60,000 Lowest |
| 3.00 | M&L for preparation of old plastered or unplastered decorated ceiling surfaces including filling of cracks/holes by acrylic crack filler and applying one coat of acrylic distemper using roller complete all as specified and as directed by Engineer-in-Charge. | 3,500 | Sqm | 38 ₹1,33,000 | 30 ₹1,05,000 Lowest | 30 ₹1,05,000 Lowest | 36 ₹1,26,000 | 36 ₹1,26,000 | 32 ₹1,12,000 | 30 ₹1,05,000 Lowest | 38 ₹1,33,000 | 30 ₹1,05,000 Lowest | 38 ₹1,33,000 | 35 ₹1,22,500 |
| 4.00 | M&L for preparation of old plastered or unplastered decorated ceiling surfaces including filling of cracks/holes by acrylic crack filler and applying two coat of acrylic distemper using roller complete all as specified and as directed by Engineer-in-Charge. | 1,000 | Sqm | 52 ₹52,000 | 50 ₹50,000 | 50 ₹50,000 | 60 ₹60,000 | 60 ₹60,000 | 45 ₹45,000 | 46 ₹46,000 | 52 ₹52,000 | 40 ₹40,000 Lowest | 52 ₹52,000 | 40 ₹40,000 Lowest |
| 5.00 | M&L for applying two coats of white wash on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed. | 800 | Sqm | 10 ₹8,000 | 10 ₹8,000 | 10 ₹8,000 | 20 ₹16,000 | 20 ₹16,000 | 10 ₹8,000 | 10 ₹8,000 | 10 ₹8,000 | 10 ₹8,000 | 10 ₹8,000 | 7 ₹5,600 Lowest |
| 6.00 | M&L for preparation of old plastered or unplastered decorated ceiling surfaces including filling of cracks/holes by acrylic crack filler and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge. | 400 | Sqm | 13 ₹5,200 | 17 ₹6,800 | 20 ₹8,000 | 11 ₹4,400 | 11 ₹4,400 | 20 ₹8,000 | 14 ₹5,600 | 13 ₹5,200 | 20 ₹8,000 | 13 ₹5,200 | 10 ₹4,000 Lowest |
| 7.00 | M&L for applying one coat of acrylic distemper on prepared old decorated surfaces of walls (plastered or unplastered) using roller complete all as specified and as directed by Engineer-in-Charge. | 5,000 | Sqm | 31 ₹1,55,000 | 36 ₹1,80,000 | 30 ₹1,50,000 | 38 ₹1,90,000 | 38 ₹1,90,000 | 42 ₹2,10,000 | 40 ₹2,00,000 | 31 ₹1,55,000 | 40 ₹2,00,000 | 31 ₹1,55,000 | 29 ₹1,45,000 Lowest |
| 8.00 | M&L for applying two coats of acrylic distemper on prepared old decorated surfaces of walls (plastered or unplastered) using roller all as specified and as directed by Engineer-in-Charge. | 3,500 | Sqm | 42 ₹1,47,000 | 49 ₹1,71,500 | 45 ₹1,57,500 | 52 ₹1,82,000 | 52 ₹1,82,000 | 48 ₹1,68,000 | 45 ₹1,57,500 | 42 ₹1,47,000 | 45 ₹1,57,500 | 42 ₹1,47,000 | 40 ₹1,40,000 Lowest |
| 9.00 | M&L for applying one coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance, on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed by Engineer-in-Charge. | 12,500 | Sqm | 65 ₹8,12,500 | 70 ₹8,75,000 | 70 ₹8,75,000 | 76 ₹9,50,000 | 76 ₹9,50,000 | 72 ₹9,00,000 | 70 ₹8,75,000 | 65 ₹8,12,500 | 70 ₹8,75,000 | 67 ₹8,37,500 | 55 ₹6,87,500 Lowest |
| 10.00 | M&L for applying two coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed by Engineer-in-Charge. | 5,667 | Sqm | 73 ₹4,13,691 | 83 ₹4,70,361 | 90 ₹5,10,030 | 84 ₹4,76,028 | 84 ₹4,76,028 | 80 ₹4,53,360 | 82 ₹4,64,694 | 73 ₹4,13,691 | 80 ₹4,53,360 | 75 ₹4,25,025 | 65 ₹3,68,355 Lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
16 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Milind Mulik, (AE QS and C)
Military Engineer Services, Garrison Engineer (South) Ahilyanagar - 414002
PERIODICAL SERVICES TO CERTAIN BLDGS AT CHH SAMBHAJINAGAR MIL STATION UNDER GE (S) AHILYANAGAR
2025_MES_722877_1
8244/E8
Open Tender
Civil Works
Item Rate
270 days
Chh Sambhajinagar
Class D Cat a(i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (South) Ahilyanagar
₹1 L
Yes
7 Oct 2025
26 Jul 2025
18 Aug 2025
26 Jul 2025
16 Aug 2025
9 Aug 2025
26 Jul 2025 - 2 Aug 2025
Amount
M&L for preparation of old decorated surfaces of walls (plastered or unplastered) by brooming down with coir wire brushing, scrapping down, smoke root, moulds, moss and including filling of cracks/holes by acrylic crack filler, removing unnecessary nails complete all as specified and as directed by Engineer-in-charge
M&L for complete removal of existing surfaces treatment from old plastered or unplastered decorated wall surfaces, and applying minimum 1.5mm thick wall care putty over prepared wall surfaces including sanding of the putty surface after drying to achieve even and smooth finish for receiving painting complete all as specified and as directed.
M&L for preparation of old plastered or unplastered decorated ceiling surfaces including filling of cracks/holes by acrylic crack filler and applying one coat of acrylic distemper using roller complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old plastered or unplastered decorated ceiling surfaces including filling of cracks/holes by acrylic crack filler and applying two coat of acrylic distemper using roller complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of white wash on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed.
M&L for preparation of old plastered or unplastered decorated ceiling surfaces including filling of cracks/holes by acrylic crack filler and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of acrylic distemper on prepared old decorated surfaces of walls (plastered or unplastered) using roller complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of acrylic distemper on prepared old decorated surfaces of walls (plastered or unplastered) using roller all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance, on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of luster paint, interior grade on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coat of luster paint, interior grade on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of cement base paint on prepared old decorated surfaces of walls (plastered or unplastered) complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of cement base paint over prepared old plastered or unplastered wall surfaces, complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing surface treatment from old, plastered or unplastered decorated wall surfaces, preparation of surface including filling of cracks/holes by acrylic crack filler and applying two or more coats of 100% premium acrylic emulsion paint , algal, fungal and dirt resistant, exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing surface treatment from old plastered or unplastered decorated wall surfaces including filling of cracks/holes by acrylic crack filler and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and as directed.
Taking down cement or cement lime plaster of any description on brick, block or stone walls etc (at any height) including racking out joints, hacking for key scrubbing down with water etc complete & removing debris outside MD land as directed.
M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement etc complete.
M&L for 15 mm thick rendering in cement mortar 1:4 (using water proofing liquid as per manufacturers instruction) on other than fair faces of brick masonry surfaces or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid seperately under respective item)
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling finished the surface even & smooth without using extra cement complete all as specified & directed.
Supply only integral water proofing compound etc complete all as specified and as directed. Make : Fosroc, SIKA or equivalent as approved by GE
M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified & directed.
M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified
M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two or more coats of 100% premium acrylic emulsion paint , algal, fungal and dirt resistant, exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new plastered wall surfaces and applying minimum 1.5mm thick wall care putty over prepared wall surface including sanding of the putty surface after drying applying two coats of two coats of acrylic distemper over and including priming coat of primer on prepared surface of brick (plastered or un-plastered) or concrete surface using roller complete all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of plastic emulsion paint over prepared plastered or unplastered wall surfaces complete all as specified and as directed.
M&L for complete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour including filling of cracks/holes by acrylic crack filler complete all as specified and as directed by Engineer-in-Charge. Note: (a) Model of mechanical sander shall be as approved by Engr-in-charge. (b) Cost of necessary scaffolding shall be included in the unit rate quoted
M&L for applying waterproof wall care putty, over prepared surfaces (thickness vary from 1.5 to 2mm) as required for desired smoothness and levelling of surfaces in two or more layers) including sanding of the putty surface after drying to achieve even and smooth finish for receiving painting complete all as specified and as directed by Engineer-in-Charge. Note: (1) The contractor shall inform to the Engineer-in-Charge after preparation of surfaces and application of wall putty for site inspection before applying further external finishes. Please note that the further external finishes work shall start only after approval of the prepared surfaces from Engineer-in-Charge.
M & L for applying two or more coats of weather proof exterior acrylic emulsion paint, Algal, fungal and dirt resistance, of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on prepared surface of brick (plastered or un-plastered) or concrete surface complete all as specified and as directed. Note: (a) Exterior primer & acrylic emulsion paint to be applied on wall surfaces by using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr.The spray machine should be of reputed manufacturer with pro-guard technology and capability of tracking pressure complete as approved by GE/Engr-in-Charge . (b) Allow 6-8 hrs to dry the surface for painting of subsequent coats. (c) Cost of necessary scaffolding shall be included in the unit rate quoted
M&L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specifed and as directed.
M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on old complete all as specified and directed.
M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surfaces of steel/iron/CI pipes of any description exceeding 10cm width or girth and applying one coat of black bituminous paint complete all as specified and as directed.
M&L for preparation of surfaces of floor and applying one coat of floor guard of approved shade complete all as specified and as directed.
M&L for preparation of roof tiles at any height (up to 10m) and applying one coat of tile guard of approved shade including required scaffolding etc complete all as specified and as directed.
M&L for preparation of roof tiles at any height (up to 10m) and applying two coat of tile guard of approved shade including required scaffolding etc complete all as specified and as directed
M&L for cutting chases for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting exc 10 cm and not exec girth all as specified and as directed.
Dismantling of AC / PVC (SWR) pipes of any size including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along with the centre line over fittings and accessories) complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall using clamps complete all as specified & as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall using clamps complete all as specified & as directed.
Fixing only PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall using clamps complete all as specified and as directed.
Fixing only PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall using clamps complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore complete all as specified and as directed.
S&F PVC (SWR) junction single, (Single T) equal or unequal 75mm bore complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.
S&F PVC (SWR grade) branch piece 110 mm, single (single Y) equal or unequal fixed etc complete all as specified and as directed.
S&F PVC (SWR grade) branch piece 75 mm, single (single Y) equal or unequal fixed etc complete all as specified and as directed.
M&L Removing the loose spalled concrete portions, cleaning thoroughly by making it free of dirt, rust etc. and applying one coat of DR. FIXIT Epoxy Zinc Primer to the reinforcement bars, applying 1 coat of bonding agent (DR. FIXIT Pidicrete MPB) mixed with cement (ratio 1:1) and finally levelling with DR. FIXIT Polymer Mortar PX etc complete all as specified and as directed.
S&F chicken wire mesh having 10 mm aperture and 0.63 mm dia fixed to wall surfaces with nails all as specified and as directed.
M/s.M G Kulkarni (BID ID -3392934)
sunil kaduba dakale (BID ID -3392947)
SONU ENTERPRISES (BID ID -3393633)
M/S. M.A. Sharief engineers and contractors (BID ID -3393248)
D V Engineers and Contractors Pvt Ltd (BID ID -3395004)
M/s S.R lahoti (BID ID -3395623)
kgn associate (BID ID -3394753)
M/S Tirupati Goroba Shendge (BID ID -3393974)
M/s kishor M Lalwani (BID ID -3394396)
ASHWAMEDH ENGINEERS (BID ID -3393784)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .