Fire Fighting System for the work of G 3 50 Bedded COVID Hospital at MJN Medical College and Hospital, COB

Amount

FIRE FIGHTING (RATE FOR ESTIMATE) Supply, errection, testing and commissioning of electrical motor driven main pump, centrifugal horizontal type. With gland packing capable of deliver 2850 LPM at 86 AMWC. The pump shall be coupled with TEFC motor of suitable KW with speed of 2900 RPM with all accessories and complete set shall mounted on common base frame. The quoted rate shall include fixing of coupling. Coupling guard and foundation boultsetc. Civil foundation will be claint scope.

Supply, errection, testing and commissioning of electrical motor driven jocky pump horizontal, centrifugal type capable to deliver 180 LPM at 88 MWC. The pump shall complied to TEFC motor of suitable KW with speed of 2900 RPM with all accessories mouted on common base frame

Supply, Erection, testing & commissioning of compartmentalised common control panel for Electrical Motor driven pumps as per technical specification attached with this tender document. All components shall be housed in a common cubicals made of 16 swg. M.S. sheet with required stiffners(if required). The panel shall be powder quoted of approved colour both inside and out side. The pane shall have both bottom and top cable entry provisions and panel shall be mounted on pedestal of 300mm height. The panel should have sufficient(min. 6 nos per pump set) NO / NC contacts for extending the status of fire pumps to the fire alarm panel.

Supply, errection, testing of MS black steel pipe heavy grade conforming to IS : 1239 Part-I/3569 including all fittings viz. elbows tees, flanges etc. reduce clamps. MS support- fasciners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and weided joints complete with cutting and making good the complete with cutting and making good the walls, floor or any other surface (For pumping system). 250mm. NB x 6mm thick

200 mm. NB x 6 mm thick

Supplying, installing, testing and commissioning of C.I. gate valves as per IS: 14846 (PN 16) with matching flanges, complete with nuts & bolts. Size 200mm. NB

size 150 mm NB

size 80 mm NB

size 65 mm NB

Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS: 5312(PN 1.6) swing check type with required flanges, nuts, bolts and gaskets etc. complete. 150 mm NB

Supplying, installing, testing and commissioning of CI globe valve as per IS: 9338 (PN 10 rating) complete including matching flunges and nuts and bolts complete. Size 25 mm NB (GM Construction)

Supply and installation of gummetal 4 way collecting head with 63 mm dia in insustensus type inlet 150 dia flanged outlet without built in cheque in valve for fire brigrade connection to fire water reservor (IS: 904) with one no butterfly valve and NRV of 150 NB size.

HYDRANT SYSTEM Supply, erection, and testing of MS heavy grade pipes conforming to IS:1239 / IS:3589 with accessories including all fittings viz elbows, tees, reducers, flanges, clamps included with joint with complete with anti corrosive treatment to burried pipes by wraping with two coats of 4 mm thick PUIP KOTE membrane applied over a coat of primer for external yard hydrant network. 150mm NB

Supply , errection, fabrication testing MS black steel pipe heavy grade conforming to IS: 1239 Part-I/3589 including all fittings this viz. elbows, tees, flanges etc reduce clamps MS support dash fasteners etc. including painting the pipe with two coats with red oxide and two coats of approved enamel paint and weided joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface (for hydrant system inside building and outside building to laid along with boundary wall) 150 mm NB

Supplying, and installation of swinging type CI non return valve as per IS: 5312 with flap and SS hings complete including matching flunges, nuts and bolts conforming to IS: 5312 150 mm NB

Supplying, installing, testing and commissioning of C.I. gate valves as per IS: 14846 (PN 16) with matching flanges, complete with nuts & bolts. Size 150mm. NB

Supplying, installing, testing and commissioning of CI globe valve in gun metal construction to IS: 778 with screwed endes 25mm NB size.

Supply, installation of automatic 25 NB air released valve

Supply and installation of GM obliqueType singles headed hydrant valve with 80mm inlet and 63mm. Outlet GM instantaneous male coupling with rubber cap and chain conforming to IS: 5290 including matching flunges gasket and nuts and bolts .

Supply and installation of granmental branch pipe with 20mm. Nozzle conforming to IS: 903 complete.

Supply and installation of 63mm dia rubberised reinforced rubber line hose pipe in 15m length conforming to IS: 636 type two ISI marked with granmetal male and female instantanteous coupling conforming to IS: 903 wounds with 18 SWG copper wire complete.

Supplying and installation of MS hose box of fabricated form 16 SWG CRCA steel double door with lockable arracngements to accomodated 2 RPL hose of 15 m length and 1 branch pipe painted white inside and red outside with one key. (750mm x 600 x 250mm )

Supplying and installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour slove paint two coats over one coat of primer with 30 M long 20 mm dia rubber hose pipe with 10kg. /sq. cm working pressure with ZM self closing shut of nozzle of 5mm. outlet fusced on wall with dash fastners.

Supply and installation of Gunmetal 2 way collecting head with 63mm dia instantanneous type inlet 150dia franged outlet with built in check valve for the brigade connection to fastners (IS:904) with one no. butterfly valve & NRV of 150 NB size.

Supply and installation of Gunmetal 3 way collecting head with 63mm dia instantanneous type inlet 150dia franged outlet with built in check valve for the brigade connection to fastners (IS:904) with one no. butterfly valve & NRV of 150 NB size.

Gunmetal gale valve 25 NB

AUTOMATIC SPRINKLER SYSTEM Supplying, fabrication and testing of MS black steel pipe heavy grade conforming to IS: 1239/ 3589 including all fittings viz. elbows, tees, flunges etc. reduces clamps MS support dash fasceiner etc including paintinf the pipe with two coat of approved rate oxide primer and two coats of approved red enamel paint and wided joints complete with cutting and making good the complete with cutting and making good the walls, floors or any oher surface. 150mm NB

Providing and fixing butterfly valve as per BS : 6155 (water type) matching flunges complete with nuts and bolts. Size 150mm. NB

Supplying and fixing non return valve (water type ) with matching flunge complete with nuts and bolts size 150mm. NB

Supply and installation of globe valves in gunmetal construction to IS: 778 with screwed ends. Size 40mm. NB

Supply & fixing of sprinkler head pendent type

Supplying & fixing of 150 NB flow switch.

Supply & fixing of installation control valve complete with trims and gong. Ground level.

Supply, installation, testing and commissioning of CI gate valve as per IS: 14846 (PN 16) with matching flunges complete with nuts and bolt ground level.

Supply, installation of automatic 25 NB air released valve Ground level

PORTABLE EXTINGUISHERS Supplying & fixing of 5kg. Dry powder extinguisher consisting of welded MS cylindrical body with discharge valve nozzol and CO2 cartidge and hanging arrangement complete conforming to IS: 2171

Supplying & fixing of 9 line water type CO2 (ISI: mark) extinguisher including all accessories with all bucket and raw plug conforming to IS: 940 stair landing.

Providing and fixing 6.8 kg. CO2 type (ISI: mark) extinguisher including all accessories with wall bucket and raw plug conforming to IS : 10204.

Providing and fixing 10kg. Sand bucket (ISI marked) ncluding all accessories support stand etc.

SIGNAGES Supplying & installation in position the "FIRE EXIST" signed with luminiscent coloure having size 300 x 100mm, ground floor to third floor stair.

Supplying and fixing in position the signages. "FIRE ORDER" contained the following matter on 3mm. Thick "Opaque" PVC foam board of computerised cut PVC non reflective self adhesive viryle painted foam board of size 1200 x 1000mm.

Supplying and fixing signages with printed " IN CASE OF FIRE DO NOT USE LIFT, USE STAIRS ONLY" of 1.5 cm height ladder in red with white background. The size of the board shall be 300 x 250mm. And shall be fixed at the height of 2 mtrs. From finish floor near Manual Call Point.

Supplying, fitting and fixing 10.00 HP KOS- THREE PHASE SUBMERCIBLE MONOBLOCK PUMP SETS (SYNC, SPEED 300 RPM BRAND, KOS, MODEL No. 1050 + CODlD12S311000351 WITH MOTOR RATING- 10.0HP (7.5 KW), size (mm)-65 (SUC) x 55 (DEL) complete in all respect as per direction of EIC.

MAGNUM SAFETY INDIA

KRISHNA MULTISTRUCTURE ENGINEERING PVT LTD