Provision of facilities for Divyangjan at 9 Number of Stations in ADEN/JTJ Subdivision. AB, VN, GYM (NSG 5), KDY, VGM, PCKM, MPI & VLT (NSG 6), MEH (HG 3).

Schedule of Rates 2021 (Formation,Br & Pway works) for Chennai Division.

List of items of work that are covered under Southern Railway Unified Standard Schedule of Rates

2021 (Formation,Br & Pway works) for Chennai Division.

S No. Item No Description of Item Unit Qty Rate Amount

Providing portable fencing along running

track where work is to be done in close

vicinity of track, maintaining during execution

of work and removing after completion of the

work as per direction of the Engineer. Fencing

shall consist of self supporting steel angles of

size 50mm x 50mm x 6mm, 1.5m long

provided with hooks etc. and embedded in

CC 1:2:4 block of size 0.23m x 0.23m x

0.23m placed at c/c distance of 2m along

track. 12mm dia rods in three horizontal

layers shall be tack welded with angle posts.

Note : Released material will be property of

the contractor after completion of work. Cost

of cement required for CC blocks shall be

paid separately.

1 013041 With provision of one 50mm wide retro- Metre 1500.00 246.43 369645.00

reflective tape in horizontal direction, duly

secured/tight with vertical posts.

Preparation of completion drawings of yard in

AutoCAD, showing all the details, such as

circulating area, approach road, platform

shelter, platform, FOB etc., showing relevant

particulars to appropriate scale as per IR's

Engineering Code on approved quality,

transparent media as per details supplied by

Railways, including submission of check print

for proof checking, duly incorporating the

suggested corrections and modifications and

supplying the final plot on approved quality &

transparent media with six copies of

ammonia prints complete and soft copy, as

directed by Engineer in-charge Note: (i)

Drawings shall be prepared by using latest

drawing making softwares AutoCAD, Work

station etc. and printing shall be done on

high end latest plotters. (ii) Stage Payment -

(a) For check print - 40% (b) For Paper tracing

- 40% (c) For Ammonia print & soft copy -

2 124044 Completion drawing of way side station Each 9.00 3479.98 31319.82

CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY

Item Breakup - D-List of items of work that are covered under Delhi Schedule of Rates 2023

88 mm, weighing not less than 190 gms. 17.74 Providing and fixing PTMT shelf 440 mm long, Each 5 713.2 3566 124 mm width and 36 mm height of 33 approved quality and colour, weighing not less than 300 gms. CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY 17.78 Providing and fixing white vitreous china Each 5 14999.15 74995.75 extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous 34 china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 35 18.8.2 20 mm nominal dia Pipes Metre 150 537.6 80640 36 18.8.3 25 mm nominal dia Pipes Metre 150 627.25 94087.5 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 37 18.15.1 15 mm nominal bore Each 10 353.25 3532.5 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 38 18.17.4 50 mm nominal bore Each 5 1026.65 5133.25 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 39 18.22.2 150 mm diameter Each 5 222.35 1111.75 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 18.33 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) Each 5 10862.4 54312 40 bricks of class designation 7.5 18.48 Providing and placing on terrace (at all floor Per 10000 11 110000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 41 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY 42 18.53.1 15mm nominal bore Each 10 574.3 5743 22.0 WATER PROOFING 22.1S General Grading roof for water proofing treatment 22.14 with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 6.92 8042.3 55652.72 43 sand : 4 graded stone aggregate 20 mm nominal size) 22.22A P r o v i d i n g and applying fibre reinforced Sqm 56.87 563.1 32023.5 elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in 44 the ratio of 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 26.86 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 45 26.86.5 Frame size 65 x 100 mm Metre 30 1111.3 33339 CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N 26.87 (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 46 26.87.1 30 mm thick Sqm 9.45 4346.7 41076.32 Total 2946295.21 Schedule U-List of items of work that are covered under Southern Railway Unified Standard