Loading
Loading…
Loading…
Tender Value
₹79.3 L
EMD Value
₹1.6 L
Closing Date
14 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
DEN/HQ
14 conditions · 3 needing a document upload
Item no 10.2 of GCC 2022: Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. As per Clause 10.2 of Indian Railways Standard General Conditions of Contract'2022 with upto date correction slip. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022]
SIMILAR NATURE OF WORK FOR THIS TENDER WILL BE - ANY CIVIL ENGINEERING WORK.
24 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Para 5(3) ii. Part I of GCC shall be read as under: The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids [i.e. excluding the last date of submission of bids] [Advance Correction Slip No.5 to Indian Railways Standard General Conditions of Contract, April 2022 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 20.10.2023].
The participating Bidder must submit self certificate [Annexure V & VA as applicable] duly downloaded from the link given in Submission of Document Verification Certificate or documents uploaded along with tender. [Advance Correction Slip No.3 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 26.04.2023 and Advance Correction Slip No.4 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 07.08.2023 ].
Maintenance period of contract - The Earnest Money/Bid Security deposited by the contractor will be converted into Security Deposit and will be refunded after six months of the date of completion of the work in all respect to the entire satisfaction of the Railway and on receipt of a certificate from the Assistant Engineer concerned.
All documents in support of fulfillment of eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be submitted/ uploaded online in the website with scanned copy at the time of tender bidding with details showing in Annexure I, IV. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted. Eligibility of tenderers shall be decided solely of the basis of the documents submitted along with the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance for finalization of the tender.
Payment through Letter of Credit is applicable for this tender as per Railway Board's letter no 2017/ACII/9/10 Pt I dated 20.02.2018 & 2018/CE-I/CT/9 dt. 04.06.2018 (Annexure B & C attached).
INSTRUCTION TO BIDDERS: A] The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of his obligations or liabilities hereunder nor will it affect any rights of the railway there under. B] In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit [EMD], performance Guarantee [PG] and Security Deposit [SD] of contract forfeited and agency barred for doing business on entire Indian Railways for 5[five] years.
Shramik kalyan Contractor[s] are requested to get themselves registered on Railways Shramik kalian portal at www.shramikkalyan.indianrailways.gov.in after issuance of letter of acceptance.
Contractor(s)/ Bidders are requested to refer to Clause 46A of Indian Railways Standard General Conditions of Contract'2022 with up to date correction slip for Price Variation Clause (PVC) in works contract. Item no 46A.1 of GCC 2022: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE- I/CT/GCC-2022/Policy dated 14.07.2022]
For further details related to 'Bid Security' Bidders are requested to please connect para no 23 of the tender documents.
Bidders are requested to refer to para no 9 of tender document [Para 41 & 42 of Part II Standard General Conditions of Contract for "Variations in extent of Contract" of GCC 2022]
In case Agency desires submission of Bid Security in the form of Bank Guarantee, then please refer to para no 23(3) of Instruction to Tenderers for e-tenders, chapter I for further guidance. [Clause 5.0 of Part I of GCC 2022]
Bidders may also upload any relevant document as deemed fit.
GST has been considered during assessment of this instant tender. Tenderer(s) should quote rate inclusive of applicable GST.
Participants tenderer(s) are requested to go through the Railway Board letter no.2022/CE-I/CT/GCC-2022/POLICY/Pt.I(E-3320424) Dtd.13.03.2026 Indian Railways Standard General Conditions of Contract, April 2022 (Advance Correction slip No.11) which is enclosed in documents.
At New Alipore : Thorough renovation and repairing works after combining two type-IV flats into one flat and other ancillary works in different blocks of New Alipore Railway Officers Colony under Assistant Engineer[Works]/II/Sealdah.
TN-110-26-27
TN-110-26-27
Open
Works - General
10 Months
Kolkata, West Bengal
₹0
₹1.6 L
14 Jul 2026
17 Jun 2026
30 Jun 2026
161 items across 2 schedules · ₹90,16,981.95 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 3 | 260.3 | 780.9 |
| 2 | All kinds of soil | Sqm | 900 | 34.15 | 30,735 |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 1200 | 17.6 | 21,120 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,878.5 | 78,785 |
| 5 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 3 | 10,585.9 | 31,757.7 |
| 6 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 250 | 107.85 | 26,962.5 |
| 7 | Area of slab upto 0.50 sqm | Sqm | 20 | 5,413.5 | 1,08,270 |
| 8 | Area of slab over 0.50 sqm | Sqm | 25 | 5,136.3 | 1,28,407.5 |
| 9 | Granite work | Metre | 115 | 510.95 | 58,759.25 |
| 10 | 18 mm thick Italian Marble stone slab, Perlato, Rosso Verona, Fire Red or Dark Emperador etc. | Sqm | 2 | 10,414.8 | 20,829.6 |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 580 | 1,267.95 | 7,35,411 |
| 12 | Sal wood | cum | 1 | 1,16,520.3 | 1,16,520.3 |
| 13 | Kiln seasoned and chemically treated hollock wood | cum | 1 | 83,378.05 | 83,378.05 |
| 14 | Kiln seasoned and chemically treated hollock wood | cum | 1 | 71,337.85 | 71,337.85 |
| 15 | 35 mm thick shutters | Sqm | 90 | 2,869.1 | 2,58,219 |
| 16 | Kiln seasoned and chemically treated hollock wood | Sqm | 72 | 2,327.1 | 1,67,551.2 |
| 17 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 22 | 2,241.8 | 49,319.6 |
| 18 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 50 | 2,172.1 | 1,08,605 |
| 19 | 50x12 mm | Metre | 76 | 185.95 | 14,132.2 |
| 20 | 25 mm dia (heavy type) | Metre | 80 | 186.4 | 14,912 |
| 21 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 1000 | 238.35 | 2,38,350 |
| 22 | With 2nd class teak wood beading 62X19 mm | Sqm | 72 | 1,308.35 | 94,201.2 |
| 23 | 100x75x3.50 mm | Each | 16 | 62.05 | 992.8 |
| 24 | 75x60x3.10 mm | Each | 16 | 48.15 | 770.4 |
| 25 | 250x16 mm | Each | 40 | 193.7 | 7,748 |
| 26 | 150x10 mm | Each | 12 | 59.45 | 713.4 |
| 27 | 100x10 mm | Each | 15 | 44.3 | 664.5 |
| 28 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. | Each | 12 | 1,183.3 | 14,199.6 |
| 29 | 50 mm | Each | 15 | 356.75 | 5,351.25 |
| 30 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 12 | 1,124.85 | 13,498.2 |
| 31 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 15 | 998.35 | 14,975.25 |
| 32 | 150x10 mm | Each | 18 | 82.55 | 1,485.9 |
| 33 | 125 mm | Each | 16 | 66.25 | 1,060 |
| 34 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 125 | 570.95 | 71,368.75 |
| 35 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 45 | 3,720.75 | 1,67,433.75 |
| 36 | 1.0 mm thick | Sqm | 12 | 897.3 | 10,767.6 |
| 37 | With 2nd class teak wood beading 62X19 mm | Sqm | 72 | 1,597.15 | 1,14,994.8 |
| 38 | 12mm thick commercial ply conforming to IS : 1328 BWR type | Sqm | 20 | 1,224.65 | 24,493 |
| 39 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge. | Sqm | 16 | 2,593.15 | 41,490.4 |
| 40 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 25 | 272 | 6,800 |
| 41 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in- charge. | ONE SET | 10 | 885.1 | 8,851 |
| 42 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 15 | 533.25 | 7,998.75 |
| 43 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 18 | 11,439.6 | 2,05,912.8 |
| 44 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 150 | 772.4 | 1,15,860 |
| 45 | Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides | Sqm | 110 | 1,133.55 | 1,24,690.5 |
| 46 | Size of Tile 600 x 1200 mm | Sqm | 700 | 1,797.3 | 12,58,110 |
| 47 | 110 mm diameter | Metre | 66 | 377.4 | 24,908.4 |
| 48 | 110x110x110 mm | Each | 40 | 234.15 | 9,366 |
| 49 | 110 mm bend | Each | 16 | 150.35 | 2,405.6 |
| 50 | 110 mm | Each | 22 | 371.3 | 8,168.6 |
| 51 | 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks) | Sqm | 300 | 1,520.1 | 4,56,030 |
| 52 | 2 mm thick flat | Sqm | 36 | 1,245.65 | 44,843.4 |
| 53 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 30 | 738.65 | 22,159.5 |
| 54 | 1:6 (1 cement: 6 fine sand) | Sqm | 400 | 333.35 | 1,33,340 |
| 55 | 1:3 (1 cement : 3 fine sand) | Sqm | 80 | 300.45 | 24,036 |
| 56 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 500 | 262.7 | 1,31,350 |
| 57 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 2520 | 193.7 | 4,88,124 |
| 58 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 900 | 156.05 | 1,40,445 |
| 59 | Old work (one or more coats) | Sqm | 930 | 62.7 | 58,311 |
| 60 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 900 | 25.15 | 22,635 |
| 61 | Door chowkhats | Each | 10 | 1,782.55 | 17,825.5 |
| 62 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | Each | 15 | 271.45 | 4,071.75 |
| 63 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. | Sqm | 77 | 338.25 | 26,045.25 |
| 64 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | Litre | 20000 | 0.5 | 10,000 |
| 65 | Dismantling W. C . Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. | Each | 12 | 134.1 | 1,609.2 |
| 66 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall | Metre | 200 | 3.25 | 650 |
| 67 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. | Each | 12 | 429.1 | 5,149.2 |
| 68 | 3 mm thick | Sqm | 250 | 537.45 | 1,34,362.5 |
| 69 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 30 | 2,434.25 | 73,027.5 |
| 70 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 4.5 | 3,551.25 | 15,980.63 |
| 71 | In cement mortar | cum | 50 | 2,060.2 | 1,03,010 |
| 72 | Of area 3 sq. metres and below | Each | 100 | 367.2 | 36,720 |
| 73 | Of sectional area 40 square centimetres and above | cum | 1.5 | 4,459.1 | 6,688.65 |
| 74 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. | Kg | 1200 | 3.85 | 4,620 |
| 75 | For thickness of tiles 10 mm to 25 mm | Sqm | 600 | 73.4 | 44,040 |
| 76 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Each | 12 | 112.05 | 1,344.6 |
| 77 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 200 | 54.65 | 10,930 |
| 78 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 16 | 263.95 | 4,223.2 |
| 79 | 60mm thick cement concrete paver block of M- 35 grade with approved colour, design & pattern. | Sqm | 45 | 1,045.65 | 47,054.25 |
| 80 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 6 | 6,515.55 | 39,093.3 |
| 81 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 6 | 3,960.55 | 23,763.3 |
| 82 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 6 | 1,683.35 | 10,100.1 |
| 83 | 510x1040 mm bowl depth 200 mm | Each | 3 | 7,159 | 21,477 |
| 84 | 610x510 mm bowl depth 200 mm | Each | 3 | 4,940.8 | 14,822.4 |
| 85 | Orissa pattern W.C. pan of size 580x440 mm | Each | 6 | 3,169.05 | 19,014.3 |
| 86 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 10 | 349.15 | 3,491.5 |
| 87 | 10 litre capacity - White | Each | 10 | 1,190.65 | 11,906.5 |
| 88 | White solid plastic seat with lid | Each | 15 | 684.85 | 10,272.75 |
| 89 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 12 | 6,940.75 | 83,289 |
| 90 | 32 mm dia | Each | 20 | 119.55 | 2,391 |
| 91 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 9 | 1,607.95 | 14,471.55 |
| 92 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Each | 12 | 1,083.5 | 13,002 |
| 93 | C.P. brass | Each | 15 | 803.7 | 12,055.5 |
| 94 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | Each | 20 | 122.4 | 2,448 |
| 95 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 15 | 168.35 | 2,525.25 |
| 96 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 15 | 231.95 | 3,479.25 |
| 97 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 15 | 708.95 | 10,634.25 |
| 98 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. | Each | 12 | 713.2 | 8,558.4 |
| 99 | 15 mm nominal dia Pipes | Metre | 48 | 286.8 | 13,766.4 |
| 100 | 20 mm nominal dia Pipes | Metre | 33 | 335 | 11,055 |
| 101 | 25 mm nominal dia Pipes | Metre | 24 | 401.55 | 9,637.2 |
| 102 | 40 mm nominal dia Pipes | Metre | 15 | 702.95 | 10,544.25 |
| 103 | 25 mm nominal dia Pipes | Metre | 60 | 627.25 | 37,635 |
| 104 | 32 mm nominal dia Pipes | Metre | 51 | 739.3 | 37,704.3 |
| 105 | 20 mm nominal dia Pipes | Metre | 9 | 274.3 | 2,468.7 |
| 106 | 25 mm nominal dia Pipes | Metre | 15 | 355.4 | 5,331 |
| 107 | 40 mm nominal dia Pipes | Metre | 12 | 563.05 | 6,756.6 |
| 108 | 15 mm dia nominal bore | Metre | 30 | 366.4 | 10,992 |
| 109 | 20 mm dia nominal bore | Metre | 32 | 437.3 | 13,993.6 |
| 110 | 25 mm dia nominal bore | Metre | 18 | 551.7 | 9,930.6 |
| 111 | 25 mm dia nominal bore | Metre | 22 | 467.75 | 10,290.5 |
| 112 | 40 mm dia nominal bore | Metre | 22 | 617.05 | 13,575.1 |
| 113 | 25 mm nominal bore | Each | 10 | 622.4 | 6,224 |
| 114 | 20 mm nominal bore | Each | 15 | 539.95 | 8,099.25 |
| 115 | 40 mm nominal bore | Each | 12 | 826.1 | 9,913.2 |
| 116 | 15 mm nominal bore | Each | 12 | 406.85 | 4,882.2 |
| 117 | 20 mm nominal bore | Each | 15 | 462.5 | 6,937.5 |
| 118 | 25 mm nominal bore | Each | 12 | 464.05 | 5,568.6 |
| 119 | 15 mm nominal bore | Each | 10 | 97.75 | 977.5 |
| 120 | 150 mm diameter | Each | 12 | 222.35 | 2,668.2 |
| 121 | 40 mm nominal bore | Each | 9 | 1,142.4 | 10,281.6 |
| 122 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 6000 | 11 | 66,000 |
| 123 | 15 mm nominal bore | Each | 10 | 820.7 | 8,207 |
| 124 | 15mm nominal bore | Each | 15 | 574.3 | 8,614.5 |
| 125 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | Each | 12 | 74.8 | 897.6 |
| 126 | 15 mm nominal bore, 90 mm long, weighing not less than 93 gms | Each | 12 | 196.75 | 2,361 |
| 127 | 125 mm nominal dia with 25 mm waste hole | Each | 12 | 51.85 | 622.2 |
| 128 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms | Each | 15 | 182.1 | 2,731.5 |
| 129 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 15 | 111.45 | 1,671.75 |
| 130 | 100 mm diameter | Metre | 42 | 443.6 | 18,631.2 |
| 131 | 150 mm diameter | Metre | 48 | 695.8 | 33,398.4 |
| 132 | 200 mm diameter | Metre | 32 | 970.35 | 31,051.2 |
| 133 | 100 mm diameter S.W. pipe | Metre | 18 | 964.75 | 17,365.5 |
| 134 | 150 mm diameter S.W. pipe | Metre | 22 | 1,179.85 | 25,956.7 |
| 135 | 200 mm diameter S.W. pipe | Metre | 26 | 1,375.45 | 35,761.7 |
| 136 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 85 | 495.05 | 42,079.25 |
| 137 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 115 | 598.6 | 68,839 |
| 138 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 231 | 1,176.8 | 2,71,840.8 |
| 139 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Kg | 500 | 638.35 | 3,19,175 |
| 140 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | Sqm | 60 | 617.05 | 37,023 |
| Schedule total | ₹83,40,305.18 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-B-LOC.pdf
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
ComlCompliance-IVVVIVIIVIIIIXXI.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
ANNEXURE-C-LOC2.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
annexureVIBcontractualturnoverdata.pdf
ATTACHMENT
annexureVIABidsecurity.pdf
ATTACHMENT
Annexure--I_a_I_b_IIIII-TechComp.pdf
ATTACHMENT
tmtbarsdecontrolled.pdf
ATTACHMENT
Annexure-V_VA.pdf
ATTACHMENT
GCCACSUPRO_10.pdf
ATTACHMENT
TenderDocumentChapterI-II.pdf
ATTACHMENT
JPODIGGING.pdf
ATTACHMENT
LetterregardingrecommendedlistofBrands_makeofmaterialsdated03.09.2025.pdf
ATTACHMENT
Cesscharge.pdf
ATTACHMENT
IRStandardGCC2022AdvanceCorrectionSlipNo11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .