NITNo13ItemNo12

Supply of swaged type Steel tubular Pole with base plate for fixing of Street light in overall length of 7 meter.

Fabrication / supply of MS Clamp for fixing of GI bend on Steel tubular Pole

Supply of SMC junction boxes anti-corrosive, water resistant, UV protected high temp resistant, weather able and suitable for all kinds of climatic conditions. Self-colored, fire retardant and high dielectric strength & maintenance free, Make:- Sintex/Binani/ISI

Fabrication / supply of MS Clamp for fixing of SMC Junction Box on Steel tubular Pole

Supply of SP MCB 6 Amp. Make: Havells/L&T/C&S/Bentex

Supply of PVC copper flexible wire 1.5 sq. mm make Havells/Grandlay/Finolex/Polycab/ Any DJB approved make..

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.. Up to 35 sq. mm DSR 2018, 7.3.1 (670 Mtr. Aluminium Armoured Cable of size 10 Sq. mm X 2 Core will be provided by Department for installation)

Erection of metallic pole taken above in cement concrete foundation in the ground including excavation and refilling etc. as required.

Painting of poles with one coat of red oxide primer and two coats of enamel paint.

Connection of 2 core 10 sq. mm Al. Arm. Cable in the existing feeder piller panel with required thimbling, tapping etc. as per IER.

Fixing of 45 Watt LED street light fitting on the poles with bend, clamps. wire, Junction Box , MCB taken above with all connections, thimbling, tapping etc and with the help of required labour, tools and tackles, ladders etc. as per site requirement. The Job includes connections of 10 sq. mm X 2 C cable in the individual junction box. (29 Nos. 45 W street light fitting will be provided by Department for installation) and (29 Nos. GI bends will be provided by Department for installation)

Dismantling of existing old damaged/worn out poles from the site and shifting them to JE incharge store in staff Qtrs Model Town.

Dismantling of existing old damaged wire/cable from the site and shifting them to JE incharge store in staff Qtrs Model Town as per instruction of engineer incharge.

Supply of 63 Amp DP Isolator Make: Havells/ L&T/ C&S

Supply of SS Enclosure for above DP Isolator. Make: Havells/ L&T/ C&S

Supply of 10 Sq. mm. single core copper flexible PVC wire. Make: Havells/ Grandlay/ Finolex/ Polycab// DJB Approved

Fixing of 63 Amp DP Isolator in the SS Enclosure on the surface of wall at mains of different qtrs. Of Type-1 as required along with connections with new 10 Sq. mm. wire taken above. The job includes disconnection and dismantling of old worn out main switches.

Testing & commissioning of all above items as per IER.

HARI ELECTRICAL CO.

CHANDERA BUILDERS

GOGIA BROTHERS