Provn of certain Minor Work, Special repair and Rev work at AF Stn Darbhagna under GE (AF) Bihta

Amount

Surface excavation n exc 30cm deep and averaging 15 cm and getting out in Soft/ loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m deep and getting out in soft/ loose soil complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation concrete complete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for MS TMT bars 8mm dia and over cut to length, bent to shape required, including cranking, bending,spirally for hoping for columns, hooking end and binding with and incl mild steel wire (annealead) not less than 0.9mm dia, complete all as specified and as directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed aggregate) mixed with water proofing compound as complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for RCC Nominal Mix 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers lintels over 1.5m span, complete all as specified and as directed.

Use and waste of formwork to sides and soffits of, bressummers lintels, rough finished complete all as directed by EIC.

M&L for RCC slab supported on columns, beams, wallas etc in roofs, landing etc and like Type B 1 (1:2:4) (20mm gardedstone agg) Nominal Mix, complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping), incl fair finish surface complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, complete all as specified and as directed.

M&L 15mm thick rendering on fair faces of external wall of brick masonary or concret surfaces in cm 1:4 finished complete all as specified and as directed.

Rendering 15mm thick on other than fair faces on brick masonary or concrete surfaces in cm 1:6 finished complete all as specified and as directed.

Prepration of newly plastered external surface of wall and applying two coat of cement base paint over a coat of chalk whiting complete all as specified and as directed.

M&L for Prepration of newly plastered on walls complete all as specified directed and applying three coat of white washing, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, waterning and well ramming in layers not exceeding 25cm thick, complete all as specified and as directed.

Removing excavated material n,exc 50 m and depositing where directed at a level n, exc 1.5m above the starting point complete all as specified and as directed.

M&L steel work in roof trusses (framed)trussed purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections ) includingdistance pieces cleats etc Fe-410 W complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of colour as approved having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

M & L for hard core (broken bricks) of gauze n exc 63mm deposited, spread in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L 100 thick PCC 1:3:6 type B2 (using 40mm graded stone aggregates) as in base course to floor finish complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate including finished surface even & smooth without using extra cement as in plinth protection complete all as specified and as directed.

M & L for 40mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in floor finished even and smooth using extra cement complete all as specified and as directed.

S & F glass dividing strip 38mm wide and 3mm thick and inserted to certain design complete all as specified and as directed.

M&L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 30 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side complete all as specified and as directed.

S&F 30mm thick 2nd class H/W glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a), complete all as specified and as directed..

S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) make "RAJSHRI" consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixed to frame at site complete all as specified and as directed.

M&L for Hold fast for fixing of chowkats and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F mild steel medium weight cold rolled butt hinges 100 mm long complete all as specified and as directed.

S&F aluminium anodised, barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

S&F 125 mm long aluminium handle, cast type, anodised complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type), 250 mm long,and fixing clip of sheet cast or extruded section or fixing bolt cast aluminium alloy and fixed complete all as specified and as directed.

M&L two coats of synthetic enameled painting over a coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth complete all as specified and as directed.

S&F steel window side hung shutters including projecting type hinges with steel handle and steel pegs stay complete with glazing bars complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F 3mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete all as specified and as directed.

M&L for window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer primer complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work wih 20x25mm 'T' and 20x20mm 'L' section with grid size of 605x605mm including with necessary 3.15mm GI wire as in suspended etc complete all as specified and as directed.

S&F Gypsum ceiling board 60x60cm x12mm thick (pre-finished ) in ceiling fixed as per manufacturers instruction, or complete all as specified and as directed.

M&L 15mm thick screed in CM 1:6 on brick or concrete surfaces for fixing of tiles as in floor complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 on wall to receive tile complete all as specified and as directed.

M&L for Non-Skid ceramic coloured tiles (Premium quality) 7 to 8 mm thick area of each tiles exc 0.06sqm but not exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

S&F 20mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs, complete all as specified and as directed.

S & F vitreous china wash down water closet pan (pedestral pattern) white including fixing to flushing cistern and flush pipe and plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel hinging device complete all as specified and as directed.

Supply and fixing PVC flushing cistern, white, 10ltr capacity with 32mm dia flush pipe any lenth fixed to water closed complete all as specified and as directed.

S&F Vitreous China wash basin, white, flat back, size 550x400mm including brackets including cutting for and pinning in ends of brackets or erecting stand including 32 mm waste coupling and Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F Fancy type Stop valves angle /concealed 15mm bore, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F fancy type Bib taps, cast copper alloy 15mm dia with capston head handle, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F Brass chromium plated Tublar towel rail 20mm dia D type 60 cm long between flanges complete all as specified and as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and as directed.

S&F of 16mm 3 layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16 ) UV stablized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc complete all as specified and as directed.

S&F20mm dia Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to wall ceilings or in floors complete all as specified and as directed.

S&F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

M&L 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joint anf fixing adhessive, fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in tranches or in floors complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends complete all as specified and as directed.

All as per item No 67 but 75mm bore.

S & F 110mm bore PVC (SWR) junction double (double T) equal or unequal complete all as specified and as directed.

S & F 75mm bore PVC (SWR) junction double (double T) equal or unequal complete all as specified and as directed.

S& 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L 20mm bore of pipe Cutting existing steel tubing for alterations or additions (Each cut measured) complete all as specified and as directed.

S&F Stain less steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapels complete all as specified and as directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L cencrete bed to drain pipes including forming cradles in cement concrete 1:3:6 type c2 100mm dia complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, and complete necessary fittings to fixed with frame complete all as specified and as directed.

S&F Sheet glass 5.5 mm thick ordinary quality and glazing with Aluminium beading with neoprene rubber packing in square exc 0.5 sq.m in each pane, complete all as specified and as directed.

S/F mortice locks of 100mm size vertical of 4 levers, aluminium body fixed to aluminium works, complete all as specified and as directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminimu door, complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting any gauge thickness including Naintal or similar pattern roof covering complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey pigment cement and pigment complete all as specified and as directed.

M&L for Prepration of old plastered on walls complete all as specified directed and applying two coat of white wash, complete all as specified and as directed.

Preparation of old steel surfaces and applying one coats of synthetic enamel paint , complete all as specified and as directed.

M&L for Non-Skid ceramic coloured tiles (Premium quality) 7 to 8 mm thick area of each tiles exc 0.18sqm but not exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in foundations, filling mass concrete complete all as specified and as directed by Engr-in-Charge.

M/L preparing surface of wood and wood based materials new or old, of any description and girth, not otherwise described and treated with creosite complete all as specified and as directed by Engr-in-Charge.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L Preparing Surfaces treating small articles such as stop, gully grating, holdfasts ends of posts backs backs of chowkats etc, area tarred n.exc 0.1 sqm each complete all as specified and as directed.

M&Lmachine cut kota stone slab flooring 15-20mm thick over cement screed base laid and jointed wih grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L Machine cut kota stone slab flooring 15-20mm thick in riser of steps, skirting, dado over screed bed rubbing and polishing complete and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including jointing cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F anodised door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 02 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed by Engr-in-Charge.

Providing cement concrete type BO 1:2:4 (12.50mm graded aggregate) in cills, steps, seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railing copings kneelers, apex stone bed plates kerbs etc water troughts and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

S&F Socket flush type 5 pin 5 Amps shutter complete all as specified and as directed.

Material and labour for point wiring for One light point with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, ISI marked, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and as directed. (a)One light point controlled by one way switch.

(b) 3pin 5 Amp socket outlet on independent board complete

(c) 3pin 5 Amp socket outlet on same board

All as per item No 92 but 3 pin 15 Amp socket outlet on independent board with 2.5 Sqmm cable complete all as specified and as directed.

S&F Switch Socket combination 2 in 1 3 pin 5 Amp and 3 pin 15 Amps flush type universal complete all as specified and as directed.

S&F Socket flush type 5 pin 5 Amps shutter complete all as specified and as directed.

Switch Piano, flish button, single pole one way, 5 Amp,230 Volts complete all as specified and as directed.

S&F Sheet metal enclosre for MCB DB SPN 4 way double door 240 Volts with 200 Amps rated bus/bars.

Ceiling rose surface bakellite of three terminals complete all as specified and as directed.

S&F MCB SPN 63 Amp ISI marked convient to 'C' Curve breaking capacity 10 KA complete in repair. Make:-Havells/Legrand/Hager.

S&F MCB Single pole 240 Volts 6-32 Amp ISI marked convienent to 'C' Curve breaking capacity 10KA complete all as specified and as directed. Make:-Havells/Legrand/Hager.

S&F ceiling fan regulator electronic step type complete all as specified and as directed.

S & F LED street Light fitting complete 70 Watt with high power energy saving pressure die cast aluminium IP 66 roadway luminiarys heat resistant toughened glass with frame better optics for uniform distribution with high power LED as Ligh source with the help of GI pipe(medium grade) and bracket complete all as specified and as directed. Make: - CG Cat Pat No LSTP-70-CDL or equivelent make and model of PHILIPS/Havells

Material and labour for sub main wiring with 2.5 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing surface complete all as specified and as directed.

Supply and laying & testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 6 Sq mm 2 core including necessary cable lugs, bolts, nuts and washers complete all as specified and directed. Make:- Nicco/Plaza/Gloster/Havells/polycab.

M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified and as directed.

M&L for sand cushioning for cable with river washed sand and pinning to provide required cover as per SSR Part –I complete all as specified and as directed.

Supply and fix GI pipe of 25 mm light grade on pole , ISI marked ,of specified sizes including necessery pipe ,fittings , MS clamps, bolts , nuts etc., complete all as specified and as directed.

Cutting walls any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering and finishing and clouring with existing colour matching complete all as specified and as directed.

Supply and fixing exhuast fan of 300 mm sweep, 1400 PRM, 230/240V, single phase with louvers complete all as specified and as directed.. Makes:- Havells/Usha/Crompton

Supply and fixing Ceiling fan of 1200 mm sweep,230V,350-370 RPM,with air delivery of 215 cmm or more with BEE 5 star rated including provn of fan hook made of MS of required size and shape,hanging with the help of down rod upto 04 feet and connecting with provn of 3 core copper cable of size 1.5 sqmm from ceiling rose to fan complete all as directe dwith complete all as specified and as directed.

Supply and fixing LED lights fitting 1x22W, 220V, AC decorative box type with driver, holder including LED tupe light connecting up with three core flexible copper conductor cable fo suitable size from ceiling rose complete all as specified and as directed.

S&F of peps galvanized steel water tubes medium grade, ISI markded galanized with all fittings laid in trenches or roof/wall of sizes 25 mm dia complete all as specified and as directed.

Cutting of existing 50 mm dia pipe GI/CI in position for insertion of new tees, tail pieces, flaged etc including necessary jointing material for flaged fitting or lead joint complete all as specified and as directed.

S&F gate valve with iron wheel head (ISI marked) scrwed both ends for iron pipe and fixed of dia 25 mm complete for the following sizes of GI pipes complete all as specified and as directed.

Construction of brick masonary valve pit chamber of following size 450x450x450 mm (internal diemnsion) including PCC, brickwork and MS sheet conver 3mm thick, MS angel iron frame size 40 mm x 40 mm x 6mm around of valve pit, locking arrangement with pad lock size 25 mm dia brass, 6 lever with duplicate keys (make godrej) and painting all steel surfaces with tow coats of synthatic anamel paint over a coat of red oxide prmer complete all as specified and as directed.

S&F fixing in repair of sheet metal enclosure single pole neutral with a two pin and earth plug and socket with one single pole MCB 20 amp 240 volts complete all as specified and as directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 4.0 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing surface complete all as specified and as directed.

All as per item No 117 above but 6 Sqmm

Supply installing, commissioning and testing split type wall mounted 5 star rating invertor type Air conditioner of capacity 2.0 TR single phase, suitable for 230 Volt+10% 50 HZ AC all weather type supply coplete of make Daikin, Hitachi, LG, Samsung, Daikin comprising of the following:- (a) Room evaporative indoor unit with three speed blower fan of appropriate capacity indlung PCB, thermostatic control, air filter and drain for condensing water (b) out door condensing unit of capacity 4500 K Call/Hrs comprising of 01 No compressor of 2.0 TR capacity with reluctance DC compressor motor, DC condenser fan motor of appropriate capcity-01 No, air cooled condenser of 2.0 pipe for suction & dicharge line with insulation, condensing watr drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condening copper unit with suitable size of copper cable shall be fixed (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. Note:- (i) cutting holes in wall/window of any thickness for installation of AC etc connection and making good the disturbed surface to match with the existing surface after work shall be done and rate is included in above rate. (ii) Electrical cable requied to connect outdoor unit with indore unit and indore unit to voltage stablizer inclsive in above rate.(iii) Copper piping/drain piping inclusive in above rate (iv) outer unit stand provid by the contractor

Supply and laying & testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 Sq mm 2 core including necessary cable lugs, bolts, nuts and washers complete all as specified and as directed.

A K C PROJECT

M/S Harsh Traders