Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹37.1 L
EMD Value
₹74,213
Closing Date
30 Nov 2026, 3:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
DVP(FMD)
HITES OFFICE NOIDA
Modification works (Civil, Electrical and HVAC) for CT Scan and X-Ray rooms at RHTC Najafgarh, New Delhi
2026_HITE_298117_1
HITES/RHTC/Civil/2026-27/01
Open Tender
Miscellaneous Works
Item Rate
30 days
Najafgarh
Please refer Tender documents
2 documents required · 2 mandatory
₹590
Yes
HITES
₹74,213
Yes
17 Nov 2026
17 Nov 2026
1 Dec 2026
18 Nov 2026
30 Nov 2026
18 Nov 2026
180 days
VOLUME V - BILL OF QUANTITY/ PRICE BID
Notice Inviting Tender Number: HITES/RHTC/Civil/2026-27/01 Dated: 17.11.2026
Name of Work : Modification works (Civil, Electrical & HVAC) for CT Scan and X-Ray rooms at RHTC Najafgarh, New Delhi.
Name of the Vendor :
SL NO. DETAILS OF WORK UNITS QUANTITY Rate (Rs.) in figures Amount (Rs.) in words AMOUNT
1 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cum 18.162 No Rupees Only
2 Centering and shuttering including strutting, propping etc. and removal of form for: minor works. Sqm 20.95
3 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand). Sqm 171.72 No Rupees Only
4 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), above plinth level up to floor V level. Cum 2.07 No Rupees Only
5 Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS 12894, in super structure above plinth upto floor V level, cement mortar 1:3 (1 cement : 3 coarse sand). Sqm 77.76 No Rupees Only
6 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 171.72 No Rupees Only
7 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: two coats. Sqm 332.52 No Rupees Only
8 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Sqm 60 No Rupees Only
9 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area 3 sq. metres and below. Nos 4 No Rupees Only
10 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25 mm and then primed the area with integral crystalline slurry @0.05 kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50 kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05 kg/running metre per coat. Mtr 25 No Rupees Only
11 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, as per direction of Engineer-in-Charge. Not exceeding 4.00 metres in length. Sal wood beams. Cum 0.29 No Rupees Only
12 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm center to center to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings: 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Sqm 39 No Rupees Only
13 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Sqm 39 No Rupees Only
14 Providing and fixing 2 mm thick lead sheet lining on existing wooden door of CT Scan Room, including cutting, fixing, overlapping, edge treatment, fasteners, adhesive and all incidental works, complete as per approved radiation shielding design. Nos 2 No Rupees Only
15 Providing, supplying and fixing lead-lined wooden door/gate of size 1 m x 2.20 m for CT Scan Room, comprising Plywood/engineered wooden shutter of suitable thickness, 2 mm thick lead sheet lining on both faces with required overlaps at joints, jambs, head and meeting edges to provide continuous radiation shielding as per approved radiation protection/shielding design, 6 mm plywood/HDF protective facing, suitable heavy-duty hinges, mortice lock, handles, bolts, door stopper and other required hardware, including lead-lined/adequately shielded door frame, fixing, cutting, fabrication, transportation, installation, alignment, sealant, adhesives, screws, edge protection, wastage and all materials, labour, tools and incidentals, complete in all respects as directed by Engineer-in-Charge. Nos 4 No Rupees Only
16 Providing and fixing 3.0 mm thick commercial grade PVC Vinyl Flooring of approved brand and colour, laid over smooth, levelled and prepared cementitious subfloor using manufacturer-recommended adhesive. The work includes cleaning, primer if required, cutting, laying, heat welded joints, finishing edges, and making good all around complete as per manufacturer guidelines and direction of the Engineer-in-Charge. Sqm 140 No Rupees Only
17 Providing and laying cementitious self-leveling underlayment over prepared existing floor, average 8 mm thick, including mechanical cleaning/preparation of substrate, filling of minor surface defects, application of manufacturer-approved primer, mixing and application of self-leveling compound, spreading and de-aeration, finishing to required level and smoothness, treatment of joints/perimeters and all labour, materials, tools, tackles, wastage and incidental works, complete as per manufacturer's specifications and CT equipment manufacturer's floor-level requirements. Sqm 120.25 No Rupees Only
18 Providing and fixing Horizontal Venetian Blinds with aluminum / wooden slats, complete with tilt and lift mechanism, bottom rail, end caps, and mounting hardware. Includes labor for precise leveling and alignment. Sqm 6 No Rupees Only
B Electrical & HVAC Works
19 Supplying, Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe, R-32/R-410/R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 Hz, 1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply: Electrical cable IS 694 or IS 9968, temperature sensing control IS / International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS: 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature): 1.5 TR with 5 Star BEE Rating. Nos 2 No Rupees Only
20 Supplying, Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe, R-32/R-410/R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 Hz, 1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply: Electrical cable IS 694 or IS 9968, temperature sensing control IS / International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS: 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature): 2.0 TR with 5 Star BEE Rating. Nos 3 No Rupees Only
21 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. Nos 6 No Rupees Only
22 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm). Mtr 60 No Rupees Only
23 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required: 6 pin 15/16 A socket outlet. Nos 32 No Rupees Only
24 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required: 15/16 A switch. Nos 32 No Rupees Only
25 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel/ PVC conduit as required: 2 x 1.5 sq. mm. Mtr 32 No Rupees Only
26 Providing and fixing tinned copper earth busbar of size 25 mm x 6 mm, mounted on suitable heavy-duty insulated supports, including drilling, cutting, bending where required, SS/brass hardware, earth connection terminals, identification labels, complete with all accessories, labour, tools and tackles, testing and making connections, as required and complete in all respects. Nos 2 No Rupees Only
27 Supplying, laying, testing and commissioning of 1.1 kV grade, 4-core x 70 sq.mm copper conductor, XLPE insulated, PVC/XLPE sheathed, steel armoured cable, complete with cable glands, lugs, clamps/supports, identification tags and all accessories as required. Cable end termination for 4C x 70 sq.mm cable with suitable brass compression gland, copper lugs, nuts, bolts, etc. complete. Testing of installed cable, including insulation resistance and continuity tests, complete. Mtr 272 No Rupees Only
28 Supply of 165 Amp. Panel enclosure CRCA/MS, floor mounted, IP54, powder coated, approx. 800x600x250 mm Incomer MCCB 160/165A, 4P, 25/36kA Copper busbar - R/Y/B 25x5 mm Cu, insulated/support mounted Neutral busbar 25x5 mm Cu Earth busbar 25x3 mm Cu Outgoing MCCB 40A, 4P Outgoing MCB 32A, 4P Outgoing MCB 20A, 4P Outgoing MCB-16A, 2P Digital multifunction meter - 3-phase V/A/kWh/PF CTs - 200/5A, Class 1 R-Y-B indication lamps - LED, 22 mm Selector switch - Auto/Manual or meter selector Control MCB-16A, 2P Terminal blocks - Suitable rating Internal wiring - FR/FRLS copper wire, ferrules, lugs Cable glands & lugs - Suitable for incoming/outgoing cables Busbar supports/insulators - Suitable for 165A system Labels, danger plate, hardware - Complete Fabrication & assembly - Cutting, drilling, mounting, wiring & testing. Nos 2 No Rupees Only
29 Providing and fixing of 300 mm wide floor raceway / floor trunking system, fabricated from high-quality GI steel sheet of approved thickness, comprising base and removable cover, suitable for routing of electrical power, data and communication cables, including all necessary bends, tees, reducers, couplers, end caps, junction boxes, dividers, supports, clamps, fasteners and other accessories, complete with cutting, drilling, alignment, jointing and fixing at floor level, including all labour and materials, complete as per approved drawings, technical specifications and directions of Engineer-in-Charge. Mtr 32 No Rupees Only
30 Supply, laying, testing and commissioning of 1.1 kV grade 50 sq.mm 4-core copper conductor XLPE insulated, PVC/XLPE sheathed, armoured cable, including cable glands, copper lugs, cleats, identification tags, termination, testing and all necessary accessories complete as required. Mtr 80 No Rupees Only
Total Amount in words : No Rupees Only
Note: The Bidder, at the Bidder’s own responsibility and risk, is encouraged to visit the Site of Works and obtain all information necessary for preparing the Bid. The Bidder shall quote his price which should include GST. In case of discrepancy in the rates quoted in words and figures, the rates in words will be considered for evaluation.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
Vol1NIT.pdf
Tender Documents • 0.71 MB
Vol2GCC.pdf
Tender Documents • 1.05 MB
Vol3SCC.pdf
Tender Documents • 4.38 MB
Vol4TS.pdf
Tender Documents • 0.30 MB
Vol5BOQ.xls
Other Document • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .