Supplying and Fixing of side drain top slab at Ma Po Vedha street in Division-28 , Unit-7, Zone-3

Dismantling of RCC Slab (reinforcement is being corroded) from Storm Water Drain - Steel is declared unfit for use (SWD 1)

Conveyance by roads in plains 0 to 10 km including Loading unloading and transportation charges

Supplying, fabricating and placing in position Ribbed Tor Steel / TMT reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given ncluding cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement nd binding wire) Upto plinth / Basement level

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver akjoists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals tc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). FOUNDATION

Providing and laying in position, Standardised Concrete Mix M- 25 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone elly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess

Pointing with Cement Mortar 1:3 Flush pointing Brickwork , etc., complete complying as per the standard specifications

Supplying and fixing of FRP manhole cover and frame of appropriate size and load capacity of approved brand confirming to BSEN – 124:1994. Product shall have top abrasion resistant layer of decorative grey ranite finish confirming to test performed as per IS – 15658:2006. It shall also confirm “Permanent Set” criterion as per BSEN-124. Product should be tested in NABL accredited test lab for load capacity and permanent set. The lifting arrangement should have an insert of 5mm in SS 304 socket type with key hole.Circular (Clear opening) 900mm Dia (Heavy Duty - 20MT) (SWD 10)

Supplying of concrete moulding