Provn of night picket, Bathing cum toilet block, protective work and Provn of certain sanctioned works under GE North Mamun

Amount

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in any type of soil, complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded aggr) as in foundation filling and mass concrete all as specified.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6), all as specified and directed.

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) and as specified and directed.

Reinforcement cement concrete M-25 (Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc including necessary form work, complete all as specified and directed.

Reinforcement cement concrete M-25 (Design mix) as in columns, pillars, piers, posts and struts etc including necessary form work, complete all as specified and directed.

Reinforcement cement concrete M-25 (Design mix) as in beams, cantilever, bressummeres lintels over 1.50m spam including necessary form work, complete all as specified and directed.

Reinforcement cement concrete M-25 (Design mix) as in Chajja, including necessary form work, complete all as specified and directed.

Reinforcement cement concrete M-25 (Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including necessary form work, complete all as specified and directed.

Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

Mild steel TMT bars 6 to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-310-O or Fe-410-O all as specified & directed.

M&L PCC 1:2:4 type B-0 in roof kerbs or mud stops, rounded or chamfered on edges, benching on chajjas, surface finished even and smooth without using extra cement, including necessary form work, complete all as specified and directed.

Spreading & leveling in layers n.exc. 25cm thick, well ramming including watering as required.

Hardcore of guage exc 63mm, Broken Stones or Boulders deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface.

Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.

M&L for 100mm thk PCC 1:4:8 type D-2 as in subbase to flooring.

M&L 25mm thick PCC, type B-1 (20mm graded aggregate) in flooring cmplete all as specified and directed.

M & L screed bed or bedding layers of mortars 15mm thick in CM 1:4 for laying floor finishes.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement, all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as specified & directed.

Machine cut kota stone in flooring 18-20mm thick over and incl 20mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd all as specified and directed.

18-20mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, all as specified and directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Rendering 05mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as spd and directed.

M&L two coats of distemper oil emulsion over a coat of primer including preparation of new surfaces complete all as specified and directed

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coats of cement base paint incl curing complete all as specified & directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed.

Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint, complete all as specified and directed.

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats and incl two coats of synthentic enamel paint over a coat of primer, complete all as specified and directed.

2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) and incl two coats of synthentic enamel paint over a coat of primer, complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F 300mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200mm of extruded section and fixed.

S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

300mm MS Rat tail door spring for door closer,complete all as specified and directed.

S&F 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, etc complete all as specified and approved by GE.

S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats (min wt 190 gms).

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling, under road, air etc all as specified.

S&F 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe.

Angular Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

S& F CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified and directed.

S&F Bib taps for 15mm bore pipe, cast copper alloy fancy type chromium plated of, complete all as specified and directed.

S & F Vitreous china wash basin (Oval Shape), white flat back,size 550 x 400 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand and 32mm dia PVC waste pipe including waste copling 32mm size full thread, all as specified and directed.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed.

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms).

S&F towel rail Brass CP 600mm long complete all as specified and directed.

S&F Vitreous China squatting pan of orissa pattern, size 580x440mm white with supply and fixing of CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, complete all as specified and as directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete including supply and fixing to trap, Incl Supply and fixing of Plastic water closet seat, black, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminized hinging devices.

S&F Jet Spray (with 1.50m tube) fixed to EWC and Angular Stop Cock complete all as specified and directed.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, incl supply and fixing PVC flush pipe 32mm bore of polyethylene of low or high density complete including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

S&F 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed.

S&F Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100mm bore dia complete, ISI Marked, all as specified & directed.

S&F 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured).

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door.

S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F cast iron cowl for 75mm dia all as directed by Engr-in-charge.

S&F cast iron Swan necks (or offsets) upto 152mm projection for 100 mm to 75 mm pipe.

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 75mm dia of pipe.

20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement.

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only liquid water proofing compound.

M&L for 75mm thk PCC 1:4:8 type D-2 as in subbase to flooring.

Sand filling under floors or in Foundation including watering & consolidation etc complete all as specified.

M&L 60mm thick M-40 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and no pigment, all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping etc.

M&L for 10mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement mixed with water proofing compound.

M&L PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels & drains.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc.

Factory made RCC manhole cover with frame (for manhole iner opening 60cm) complete all as spd and directed.

M&L concrete bed to drain pipes incl forming cadles in cement concrete 1:3:6 type C-2 for 200mm dia pipe.

M&L 200mm reinforced cement concrete pipes class NP-2 with one collar per length of pipe complete allas specified.

M&L Septic Tank, exc. In Ordinary Soil, Foundation in PCC1:2:4, Brick work in CM 1:4, RCC slab covers Incl RCC Precast manhole cover having 6 mm Plate embeded all around/ fibre reinforced cover with Angle Iron frame vent Shaft and Sludge chamber etc. complete for 25 Users. (ref TD drawing No CEPZ/TD-013/13 sheet 1 to 5).

M&L Soakage well, exc. In ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and Solid in M-25 Concrete, Incl Intercepting Chamber, screen Chamber Brick work in cement mortar, RCC cover slab in M-25/ RR masonry/ filling with brick bats, complete of Size 2.40 mtr dia X 3.00 mtr deep. (ref TD drawing No CEPZ/TD-013/13 sheet 1 to 5).

Excavation over area not exc 1.5 m deep in any type of soil and getting out complete all as specified.

Ditto all as per item srl no 94 here-in-before but exc 1.5m and n.exc 3m.

M&L Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a line surface.

M&L Cement concrete 1:3:6 (Nominal mix) in bed plates,wheel guard, coping and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces, including necessary form work, complete all as specified.

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 etc all as spd.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone all as spd and directed.

M&L Flush pointing to brick /Stone walls in cement mortar 1:3 etc all as specified.

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in weep holes etc.

M&L for providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bonders set in CM 1:6 all as spd and directed.

M&L for Boulder filling dry hand packed tightly as in back of wall all as spd and directed.

Surfaces excavtion n exc 30cm deep and averaging 15cm deep and getting out in any type of soil.

Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dresses, bedded in cement mortar 1:3, jointa 20mm thick, grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush etc.

Edge stones to flooring with stone setts of size 250 to 300mm long x 150 to 200mm wide and 450mm deep and ditto.

M&L for LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc. complete for 30 users, complete all as specified and directed. Make: Syntex

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required all as specified and directed by Engr-in-charge.

Reinforcement cement concrete (Nominal mix) type B-1, 1:2:4 (20mm graded aggregate) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc including necessary form work, complete all as specified and directed.

Reinforcement cement concrete (Nominal mix) type B-1, 1:2:4 (20mm graded aggregate) as in columns, pillars, piers, posts and struts etc including necessary form work, complete all as specified and directed.

Reinforcement cement concrete (Nominal mix) type B-1, 1:2:4 (20mm graded aggregate) as in beams, cantilever, bressummeres lintels over 1.50m spam including necessary form work, complete all as specified and directed.

Reinforcement cement concrete (Nominal mix) type B-1, 1:2:4 (20mm graded aggregate) as in Chajja, including necessary form work, complete all as specified and directed.

Reinforcement cement concrete (Nominal mix) type B-1, 1:2:4 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves, manhole,and the like, including necessary form work, complete all as specified and directed.

Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) 40mm thick as in floor finishing surfaces of concrete topping even and smooth without using extra cement.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded agg) as in plinth protection, 50mm thick and finished even and smooth without using extra cement all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

S&F 20 mm bore brass stop cock screwed down high pressure with crutch or butterfly handle screwed both ends for 20 mm bore of pipe all as specified

Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75mm bore dia complete, ISI Marked, all as specified & directed.

S&F 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F cast iron cowl for 50mm dia all as directed by Engr-in-charge.

S & F for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as specified.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

One 5 pin socket outlet 5 Amps on independent board with separate switch 5 Amp one way.

One 5 pin socket outlet 5 Amps on same board with separate switch 5 Amp one way.

All as per item No 122 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Supply and Fixing the modular switch piano type flush button single pole 6 Amp one module, front operated.

Supply and Fixing the modular socket 2 module 2 in 1,5 pin combimed pin 6 Amp.

Supply and Fixing the modular switch piano type flush button single pole 16 Amp one module, front operated.

Supply and Fixing the modular socket 2 module 2 in 1, 6/16 pin combimed pin 16 Amp.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals.

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as spd and directed.

Supply and Fixing the star rated Venti air fan AC single phase 230/240 volts 0f size 300 mm sweep with loure of metalic body with grouting nut bolts and all as specified and directed.

Supply and fixing, testing and connecting the star rated ceiling fan 230 volts, single phase of 1200mm sweep double bearing type with including down rod,canopy cover etc and connecting with 3core flexible copper conductor of 0.50 sq mm as per directed by engr-in-Charge.

Supply and fixing the bulk head light fitting LED type 10 watt complete with lamp and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose by using PVC insulated and overall sheathed flexible copper conductor cable 3 core 0.50 Sq mm.

M&L for Decorative ultra slim linear LED lighting fixture with extruded heat sink, environmental friendly, energyefficient ready to use light fitting wall/ceiling mounting suitable for 1X20 Watt LED tube with one no elecronic driver and accessories, pre-wired 4 ft lengh. Note : All LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S & F mirror light, 07 watt LED 2' length prewired with all accessories including lamp and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper condutor 3 core cable of size 0.50Sqmm. Note : LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

Supply and Fixing the wall mounted type fancy light fitting with 8 watt LED bulb and with decorative diffuser and mounting clips and lamp holder , wall mounting arrangment and all as specified and directed. Note : LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S & F decorative wall mounting bed side light 3 watt fitting LED type having flexible neck all as specified and directed.

S & Fixing High performance IP 66 LED Bldg lights of 20 watt complete with all fixing arrangement all as directed and specified by Engr in Charge.

Supply and Install the electric water heater storage type 25 Ltr capacity 5 Star rated of vertical type glass lined of inner tank and heating element and having the wall mounting arrangement,thermostate,indicators and thermally insulated copper tank of glass lined inside the tank and heating element including PVC connection for geyser with complete connection of water & testing and all as specified and directed.

S & F Sheet metal enclousers with single pole and neutral enclouser with two pin and earth plug and socket complete with one MCB 20 Amp 240 Volt.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 12 way double door open able complete.

S & F 6 to 32 A SP MCB single pole 240 V 10 KA C Series.

S & F MCB SPN Triple pole with netural 240 volts 40-63 Amps C series.

M & L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion.

M/L for tube, light grade galvanised with all fittings laid in trenches/through wall / under road or floor of 40mm bore.

Supply, laying, jointing and testing of 10 Sqmm 4 core XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches/pipes, fixed to poles/walls complete all as directed burnt out cables all as directed.

M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable, complete all as specified and directed.

M & L for well burned bricks, laid flat (old size) sub class B designation 75 for cable protection, copmplete all as specifed and directed.

M&L for brick masonary valve pit of size 60x60x90 cm (internal dimensions of chamber) including 23cmthick wall built in CM 1:6, 15mm thick plain cement plaster internally in CM 1:4 and flush pointing externally as the work proceeds, PCC 1:5:10 type E-2 in foundation 156x156cm size 40mm thick PCC 1:2:4 type B-1 in floor, 50mm thick PCC 1:2:4 as coping over brick work, MS sheet cover of size 112x112cmx3 mm thick fixed to angle frame made out of 40x40x3mm angle iron, MS handle to sheet cover, MS hinges welded to frame and sheet cover, painted with two coats of synthetic black paint over a coat of red of red oxide primer on steel work, two coats of white wash on plaster work including excavation and earth work in any type of soil complete all asspecified and directed. internal and externally on steel work incl excavation and earth work, complete all as specified and directed.

Cutting and threading to serviceable portion of existing GI pipe 25mm bore dia and making connection including reducer, Tee bend etc for 20mm GI pipe, complete all as specified and directed.

D S INFRASTRUCTURE AND DEVELOPERS

M/S DUGGAL CONSTRUCTION CO

dadwal engineers

M/S CHAIN SINGH CONTRACTOR

v k engineers and builders

Ms Dalip Kumar and Co.