Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-Finance | L1 | Accepted-Finance Being Lowest Tenderer | |
| 2 | L2₹46.7 L+₹11.9 L (34.2%)Rejected-Finance SIDDHARTH CO 24 PADMAVATI SOCIETY VALLABH NAGAR BHURAVAV GODHRA GUJARAT 389001 | PANCH MAHALS | GUJARAT | 389001 | L2 | Rejected-Finance Being Other than Lowest Tenderer | |
| 3 | L3₹60.5 L+₹25.7 L (73.9%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance Being Other than Lowest Tenderer |
Tender Value
₹48.7 L
EMD Value
₹97,320
Closing Date
14 Jul 2025, 6:55 pmClosed
LT COL ANIL KUMAR S
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8175 PROVISION OF FACADE INCLUDING FRAME WORK INCLUDING MS WORK AND PAINTING AT NAVAL DOCKYARD AND PROVISION OF DEFICIENT WASHROOM IN BUILDING NO. P-40 AT NAVAL DOCKYARD MUMBAI
2025_MES_714241_1
8175/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹97,320
Yes
17 Jul 2025
13 Jun 2025
16 Jul 2025
20 Jun 2025
14 Jul 2025
24 Jun 2025
13 Jun 2025 - 20 Jun 2025
Amount
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation and getting out hard dense soil complete all as specified and as directed.
M&L Plain cement concrete 1:3:6 type C2 using 40mmgraded stone aggregate in foundation filling in mass concrete complete all as specified and as directed.
M&L PCC in foundation in 1:4:8 type D2 (40mm garded agg) in foundation filling and mass concrete complete all as specified and as directed.
M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and as directed. .
All as per item No 20 above but half brick thick wall built in CM 1:4 complete all as specified and as directed. .
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
M&L for filling under floor with moorum laid in layers n.exc 15 cm thick spread ,levelled and rammed , watering and compacted complete all as specified and as directed.
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish incl WPC @ 3% by weight of cement complete all as specified and as directed.
Supply only water profing compound @ 3 % by weight of cment complete all as specified.
All as per item No 9 above but 15 mm thick in CM (1:4) complete all as specified and as directed. .
M&L for Hard core of guage n.exc 63 mm , deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surfaces with broken stone boulders complete all as specified and as directed. .
M&L for PCC 100mm thick type D-2 (1:4:8) using 40mm graded aggregate as in sub base all as specified and as directed.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M & L for Coloured glazed ceramic tiles in vertical surface area of tiles n exc 0.18 Sqm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and as directed. .
M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces complete all as specified and directed.
M&L for preparation of new platered wall surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed
S&F of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed as fixed in repairs.
S&F counter top wash hand basin incl chromium plated waste coupling and PVC waste pipe fixed over the granite platform complete all as directed. Note : The granite shall be measured and paid seperatly.
S&F 15 mm bore GI pipe of medium grade laid in floors or fixed in walls.(Concealed type) complete all as specified and as directed. .
All as per item No.20 above but 20 mm bore.(Concealed type) complete all as specified and as directed.
S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with and including fixing clips complete all as specified and as directed. .
All as per item No 22 above but laid in flloors/trenches complete all as specified and as directed. .
S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips complete all as specified and as directed. .
All as per item No 24 above but laid in flloors/trenches complete all as specified and as directed. .
S&F 110mm dia PVC ( SWR) grade single/double T/Y, bends etc. with access doors including fixing clips complete all as specified and as directed. .
All as per item No 26 above but 75mm dia complete all as specified and as directed. .
M/L Bib taps cast copper ally with cruch or butterfly handle 15mm bore CP fancy type complete all as specified and as directed. .
S&F fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.
M&L for 15mm dia brass self closing angle cock prismatic for urinal with wall flanges and 200 mm connecting pipe fixed in repair complete all as specified and directed (Make : CERA of cat no F9020203 or equivalent manufactures in list of manufactures)
M&L for urinal spreader of brass body chromium plated for fixing with 15mm dia pipe suitable for urinal complete fixed in repair complete all as specified and directed . (make : Cera of cat No F8070201 or equivalent manufactures in list of manufactures)
M&L for PCC 1:3:6, type C2 of 75mm thick as in plinth protection and the like etc complete all as specified and directed .
S&F angle cock with wall glange of crea cat no F2007201 chromium plated and cup consealed type secrewed both ends for iron pipe or for unions and fixed in repairs of 15 mm dia complete all as specified and directed .
M/L brass stop valve cost copper alloy high pressure with butterfly handle screwed both with iron wheel fixed for 20mm bore pipe complete all as specified and directed .
M/L ball valve brass with polythelene float and fly nut fixed complete for 15 mm bore of pipe complete all as specified and directed .
M/L PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.
S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.
M/L Grating doom with central hole100mm dia PTMT complete all as specified and directed .
S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc all as complete and directed. (Note : pipe will be laid under floor) Make : Finolex/supreme or equivalent manufactures approved by GE
S&F Factory made solid prelam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing (Note: Colour and texture shall be approved by GE .
S&F factory made prelam (single side) PVC Door Frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in openingcomplete all as per specification and as directed .
S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and as directed.
M & L for Anodised aluminium snap grid frame work for false ceiling of grid size 600X600 mm with Hangers 2-4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long fixing with cement fiber board of size 595 mm x 595mmX4mm etc complete all as specified all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified all as specified.
M&L for preparation of new steel surfaces exc 10cm width of girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified all as specified.
Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment complete all as specified all as specified.
M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 E-165 complete all as specified and directed.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed
S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed
S&F rolled mild Steel but hinges 100mm size complete all as specified and as directed
S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed
S&F Extrude aluminium anodised alloy handles, fabricated type 150mm size complete all as specified and as directed
S&F Door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed
M/L rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )hoisted and fixed in position all as specified in SSR Part 1 capacity 1000 litres (Make : Polycon/Sintex/leader) of ISI marked complete all as specified and as directed
M/L PCC 1:2:4, type B0 laid as base of water tank, roof slab and any other locations with water proofing compound complete all as specified & directed.
M&L for concrete bed to drain pipes incl forming cradles Cement concrete 1:3:6, type C2 using 40mm graded stone aggregate bore of pipe 150mm complete complete all as specified and as directed
M&L RCC pipes class NP2 , laid and jointed with collars complete 150mm bore of pipe complete all as specified and as directed .
M& L PCC 1:2:4, type B1 using 20mm graded stone aggregate in benching concrete, and finished fair and even complete all as specified and as directed
M& L PCC 1:2:4, type B1 using 20mm graded stone aggregate in coping concrete,and finished fair and even complete all as specified and as directed
Extra for forming fair finished channels inner girth n.exc 30 cm using extra cement complete all as specified and as directed .
Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and as directed .
Cutting into existing manholes for connecting new drains , making good to pipe , and haunching concrete and rendering,smooth finishing reforming as reqd for 150 mm bore pipe complete all as specified and as directed .
Removing debris exc. 1.50 Km but n exc. 25 Km and depositing where directed, in soil outside MD land complete all as specified and as directed .
M&L for anodised aluminium frame work for door, windows, ventilator, framing etc with one or more rebats including jointing cleat of tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding col/beam/ slab to hold APC cladding etc including removal of old pan patti of wooden/ any other materials if present on ground/site etc complete all as specified and as directed
S & F exterior protective shied of aluminium 3mm thick composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and as directed . (Note:- Colour/ Pattern of ACP sheet shall be decided by GE).
S&F continous piano hinges width of flap 40mm, mild steel, bright finish ir electro galvanised complete all as specified and as directed.
S&F brass drawer handles, projecting type drop (50mm to 65mm) on screwed plate complete all as specified and as directed .
S&F magnetic catch Push Catch Latch Automatic Spring Catch Rebound Self-locking Catch Latch Push to Open Touch Catch Latch and Screws to hold the ACP caldding door frame complete all as specified and as directed.
Supply and fix structural steel framed works such as angle, channel etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge, frmae etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs upto G+9 floor complete all as specified and as directed
M&L for preparation of old surfaces of of wall any description & applying one coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof up to 1 to 4 storeys buildings complete all as specified and as directed .
M&L for point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly complete all as specified and as directed . (a) One light point controlled by one 5A switch
All as per item No. 73 above but for One fan point controlled by one switch complete all as specified and as directed ..
All as per item No. 73 above but for One 5A switch socket point on independent board complete all as specified and as directed .
M&L for submain wiring with 2 runs of 6 sqmm and one run of 6 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up complete all as specified and as directed .
S & F modular switch 1 way 6A, 1 module complete all as specified and as directed .
S & F modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and as directed .
Supply and fixing LED lights fitting 20W, 220V,4ft, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed .
Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed .
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed .
Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and as directed .
S&F Distribution Board double door, prewired type, made out of CRCA mild steel surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN DB 04 Way ,240V with bus bar rating 100Amps, dust and vermin proof suitable for incorporation of MCB'S and isolators etc complete all as specified and as directed .
S & F MCB, C Curve type suitable for 240 volts AC supply, SP 5 to 32A with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and as directed .
S & F MCB, C Curve type suitable for 240 volts AC supply, SPN 40 to 63A with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and as directed .
siddharth and company (BID ID -3357496)
RAJENDRA CONSTRUCTION (BID ID -3351575)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .