Rewiring and maintenance work by replacing conventional fitting by LED energy deficient fitting to APWD Type-III Qtrs 5,6,7 and 8.

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR LS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch,modular plate, suitable size G.I/PVC box and earthing the point with 1.5 sq.mm. FR LS PVC insulated copper conductor single core cable etc as required.

Group A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 4 x 6 Sq.mm + 2 x 6 sq.mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Wiring for light / power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying of Prewired LED Batten lighting Fixture 20watts energy efficient (Ready to Use Pack) similar to Havells LED Pride Essential LHEXAWP7IN1W020 or its euiqvalent as per IS Standards approved by EIC

Supplying and fixing brass batten/angle Holder including connections etc. as required

Supplying of Following lamps

LED Lamp 09 Watts for Batten holders.

Supplying of A.C. Ceiling fan 1200 mm i/c Down rod of standard length 30 cm with ISI mark and all accessories required (Make:Bajaj/Usha /Crompton/Orient.) or its equivalent as per IS Standards approved by EIC

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of Exaust fan 300 mm i/c protective guard with all accessories required (Make:Bajaj/Usha /Crompton/Orient.) or its equivalent as per IS Standards approved by EIC

Installation, testing and commissioning of ceiling fan, including wiring with the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc, directly on ceiling / wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhuast fan in the existing opening, including making good the damage, connection, testing, commisioning etc as required

a) upto 450 mm sweep

Supplying and fixing 3 pin 5 Amps ceiling rose on the existing junction box/wooden block including connections etc as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface / recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way,Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and fixing following rating, double poles, 240 volts, isolater in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) 40 Amps

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supplying and errection of metering box made out of SMC of overall size 350mmx250mmx150mm with hinged cover and locking arrangement, viewing glass etc as required

Supplying of Prewired LED Bulk Head Fittings 10 watts similar to Bajaj BIBWP 10 W LEDor its equivalent as per IS Standards approved by EIC

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

(a). 5/6 amps switch.

(b). 3 pin 5/6 amps socket.

DILIP RAJ