09/E.U.D.C.-Talkatora/2025-26

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

11/0.4 K.V. 630 K.V.A. Transformer.

11/0.4 K.V. 400 K.V.A. Transformer.

11/0.4 K.V. 250 K.V.A. Transformer.

LT XLPE Cable AL 1X400, 1X630 sq.mm

11 K.V. Pin/ Insulator Polymeric.

LT XLPE Cable 3.5X240/400 sq.mm

ABC (3X120+1X95+1X16) sq.mm

Disconnection of existing 100/250/400 KVA Transformer from system shifted upto safe place to the nearest 33/11 K.V. Sub-Station of Division or required place.

Placing of 250/400/630 K.V.A. healthy Transformer from out side of yard to plinth with the help of crain and T & P.

Safe carriage of dismantled T/F from site of work to JE dump store & J.E. dump store to ESC Daliganj, Lucknow including loading/unloading and proper stacking

Lay down the LT XLPE Cable of size 1X400, 1X630, 3.5X240 Sq.mm. for making the both side, connection of Transformer after fixing the necessary clamps Lugs and other material required for completion of work including carriage from store center.

AB Conductor Stringing & sagging of 3 phase with necessary clamps, Eye hook, Suspension clamp, A-B type connector etc. on ABC New line as per RESPO specification and direction on E/I. ABC shall be supplied by department.

Construction of masonary plinth suitable for 250 K.V.A. Transformer of size 2X2X1.2 Mtrs with complete civil material & 02 Nos.,100X50 mm, M.S Channel 2.0 Mtr. long and M.S Bar 8/10 SWG complete in all respect as per RESPO norms.

Earthing of 11/0.4 K.V Distribution Transformer body and neutral sepertely by way of boring and lowering of ISI marked two Nos. G.I pipe 1.5" dia 20 m deep from the ground level with solid cone at the lower end of G.I pipe. One end of G.I strip of size 50X6 mm. will be connected with neutral and body of the Transformer & other end will be clamped & welded with G.I Pipe as per UPPCL norms (All the material will be arranged by contractor at their own cost.)

Fabrication and erection of wire mesh fencing 02 Mtr. height with a gate and with retaining wall including grouting of fabricated M.S. Angle 65X65X6 mm. support (05 Nos. in a Sub-Station). Painting of fencing/support with all material as per specification/drawing complete in all respect.

Construction of massonary type D.P. box with all the massonary material and provision of 02-O/G tailless fuse unit of 500 A with Cu- bus bar 03 nos for phase and 01 No. for neutral etc. (only PVC Cable 1x400 and 3.5x240mm2 will be provided by deptt. and Other material provided by contractor)

Repairing of Plinth.

Repairing of Fencing.

Supply and fixing of following material -

Holding Clamp with Nut & Bolt.

Copper Bus Bar

H.T. Connector.

L.T. Connector/L-Piece.

Aluminium Lug for 400/630 KVA T/F

L.T. Clamp.

L.T. Shackel Insulator.

Top Channel.

Dropper Channel

Supply and fixing of Henlay type tailles unit 500 Amp. 650 Volt consisting of 06 Nos. Brass back entry, 06 Nos. U-type spring contact made of copper, brass coupling with porcelain fitted on the GI sheet of 16 SWG with arrangement of 01 No. neutral as per drawing/RESPO specification.

Note :- 1- All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2- One carriage including loading/unloading from dump site to pit site is included in scope of work. 3- During execution of work all risk will be of the contractor. 4- Contractor will provide all T & P, vehicle and man power. 5- All the old and used material should be taken on book. 6- The quantity may be vary ±10%. 7- GST will be paid extra as legally applicable. 8-The work should be carried out under Bussiness Plan 2025-26. 9-The work will be done as per norms of UPPCL/RESPO.

SYED TRADERS (BID ID -5542650)

SINGH ENTERPRISES (BID ID -5542471)