AR MO to Residential Building under Shimla Division No,III SH Renovation of kitchen board, painting and distempering in set No.2 Type III at Knollswood NigamVihar Shimla

Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)iA6:BC13ncluding carriage of materials within all leads and lifts.

Dismantling tiled floors laid in mortar upto all floor level including stacking of serviceable materials an disposal of un-serviceable materials within all leads (wooden/concrete joists to be measured and pai for separately) For all thickness of tiles 25mm and upto 40mm including carriage of materials in aleads and lifts.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement: 3 coarse sand): 6 graded stone aggregate 20 mm nominal size)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (i) Second Class Deodar wood (a) 35mm Thick Shutters

Providing and fixing 35mm wire gauge shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts as per direction of Engineer-in-charge in 2nd class deodar wood.

Providing and fixing 250x16 mm bright finished brass sliding door bolts, ISI marked with nuts and screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of materials within all leads and lifts.(i) 150x10mm size.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete including carriage of materials within all leads and lifts:- (i) 125mm size.

Providing and fixing 6mm commercial ply of standard quality ISI mark and approved shade and colour in wall linning / ceiling including mitring at junctions, butt jointing and nails complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. (Frame work for base to be measured and paid for separately).

Providing and fixing 19 mm thick commercial board proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts

Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete inclding carriage of materials with in all leads and lifts

Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts.

Providing and fixing hard wood plain square edged cover fillets (beading) 19mmx6mm section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts.

Providing and fixing bright finished brass Furniture handle including carriage of materials within all leads and lifts.(i) 100mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts:- Double strip (horizontal type).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts (i) Size of Tile 300x300 mm

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts (i) Size of Tile 300x300 mm

15mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:6 (1Cement:6 Sand) including carriage of materials within all leads and lifts.

Providing and laying Ceremic floor tiles in Size of Tile 300x300 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials within all leads and lifts

White glazed tiles 6mm thick of approved size, shade, design and quality in skirting risers of steps and dado 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement is to Three Sand) and jointed with cement slurry including carriage of materials within all leads and lifts.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete within all leads and lifts

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of the Engineer-in-Charge including carriage of materials within all leads and lifts.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade Old work (one or more coats) including carriage of materials in all leads and lifts.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Painting with synthetic enamel paint on previously painted wood or steel surface of approved brand and manufacture of required colour to give an even shade one or more coats on old work including carriage of materials in all leads and lifts.

Painting with synthetic enamel paint on previously painted steel surface of approved brand and manufacture of required colour to give an even shade one or more coats on old work including carriage of materials in all leads and lifts.

Providing and fixing curtain rods of 25 mm thick Ess Ess Make with brackets and Funnel fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm.Hindwre (cat no 10098).

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of materials within all leads and lifts.(Hindwre (Cat No 10098).

Providing and fixing C.P. brass Kitchen Sink mixture of approved quality Ess Ess Make Long Body including carriage of Matreial with in all leads and lifts as per direction of Engineer-in- Charge.(i) 15mm Nominal Bore

Providing and fixing Basin mixture of approved quality including carriage of Matreial with in all leads and lifts as per direction of Engineer-in- Charge.(i) 15mm Nominal Bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore ESS ESS (T-112 CP).

Providing and fixing 15mm nominal Bib Tap Long body of approved quality complete including carriage of materials within all leads and lifts. (ESS ESS (T-103 D CP).

Providing and fixing CP brass soap Dish complete. including carriage of material within all leads and lifts as per direction of Engineer-in-charge.(Cat No.S1 SD 101).

providing and fixing PVC wast pipe for sink or wash basin including PVC waste fittings complete flexible pipe 32mm

Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing 8 mm Dia charomium plated Ess Ess Jet with (CARDIN) Flexible tube 1.00 Metre long with Ess Ess Traingular Plate to European Type WC Pan including carriage of materials within all leads and lifts.

Providing and supplying of PVC Solid seat cover for European Type WC of specified quality to Nabha residential colony for day to day maintenance to be done thorugh departmental labour including carriage within all leads and lifts

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour:-15mm nominal bore with 45cm length.

Disposal of moorum/ building rubbish/ malba. Similar unserviceable , dismantled or waste material by mechanical transport including loading, Transporting, unloading to approved Monicipal dumping ground for lead upto 10km. Foe lalleafts, complete as per dierection of Engineer- in Charge.Note:-Item to be applicable in urban area having directions for restricted hours movement/ plying of load carring motor vehicle of 3.5 cum. or More.