Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹28.3 L+₹1.6 L (6.16%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹31.4 L+₹4.7 L (17.6%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
16 Mar 2022, 6:00 pmClosed
GE(AF) B/R Chakeri Kanpur
GE(AF) B/R Chakeri Kanpur
REPAIR TO ROOF SUNKEN FLOORING RUSTED PIPE LINES AND CONNECTED WORKS IN N1 NAIR KULDEEP AND POWER HOUSE AREAs AT AFS CHAKERI KANPUR
2022_MES_508613_1
GE(AF)/CHK/T-55 OF 2021-22
Open Tender
Civil Works
Item Rate
270 days
GE (AF) B/R Chakeri
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(AF) B/R Chakeri Kanpur
₹90,000
Yes
25 Apr 2022
16 Feb 2022
22 Mar 2022
16 Feb 2022
16 Mar 2022
2 Mar 2022
Amount
Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard complete all as specified and directed.
Demolition of cement concrte in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M & L for rendering 15 mm thick in CM (1:3) Mixed with liquid water proofing compound (@ 200 ml per bag of cement) on fair faces of brick or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for two coats of master seal 550 of Sika/pedelite/Dr Fixit/Asian to prevent leakage/ seepage through sunken floor over prepared surfaces, complete all as specified and directed.
M & L PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling mass concrete complete all as specified and directed.
M & L for 25 mm thick PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in sub base for floor complete all as specified and directed.
M & L for 7 to 8 mm thick non skid ceramic coloured digital tiles (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
Ditto all as per item No 7.00 here-in-before as in skirting/dado but over and including 10 mm thick cement plaster as backing coat in CM (1:3) complete all as specified and directed.
M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and like over and including 20 mm thick bedding layer in CM (1:6), set jointing & pointing in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete all as specified and directed.
S & F in repair 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.
Re-fixing of 15 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors after taking down old pipes complete all as specified and directed.
S&F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Re-fixing of 20 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors after taking down old pipes complete all as specified and directed.
Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with CM (1:3) ,cutting depth not exc 10 cm girth complete all as specified and directed.
S&F in repairs 15mm bore chromium plated cast copper alloy bib cock with flange fancy type with flange complete all as specified and directed.
S&F in repairs 15mm bore chromium plated cast copper alloy pillar cock complete all as specified and directed.
S&F in repairs 15mm bore angle cock with flange, cast copper alloy fancy type chromium plated with flange complete all as specified and directed.
S&F in repairs 15 mm bore concealed stop cock, cast copper alloy fancy type chromium plated with flange complete all as specified and directed.
S&F in repairs chromium plated overhead shower rose multi-flow of Cat No BOS-13 with shower arm 225 mm (with flange) complete all as specified and directed.
S&F in repairs brass chromium plated grating of size 127 mm dia complete all as specified and directed.
S&F PVC waste pipe 32 mm bore for WHB/sink of Make-Prayag Cat No 327 or equivalent in Cera/Essco as approved by GE in writting complete all as specified and directed.
S&F in repairs brass chromium plated towel rail of 450 mm long complete all as specified and directed.
S&F in repairs health faucet brass chromium plated with1M long flexible pipe and hook complete all as specified and directed.
S&F in repairs chromium plated soap dish of suitable size complete all as specified and directed.
S&F in repair 32 mm dia low density polyethylene pipes with bends etc as required (LDPE) of pressure rating 6 kg/sqcm, fixed to wall, ceilings or in floors etc complete all as specified and directed.
S&F in repair 15 mm dia fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe (min weight 15 mm-105 gms) complete all as specified and directed.
S&F in repair 15 mm dia fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe (min weight 15 mm-120 gms) complete all as specified and directed.
S&F in repair 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe (min weight 15 mm-90 gms) complete all as specified and directed.
S&F in repair 15 mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe (min weight 15 mm-90 gms) complete all as specified and directed.
S & F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and directed.
S & F in repair Shower arm 15 mm dia and 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and directed.
S&F in repair 450 mm long PVC connection 15 mm size with PTMT nuts of complete all as specified and directed.
S&F in 650 mm long repair PVC connection 15 mm size with PTMT nuts of complete all as specified and directed.
S&F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe (Minimum weight 20mm-210 gms) complete all as specified and directed.
S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe . (Minimum weight 20mm-210 gms) complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required re connecting and refixing in position of exc 250 & n.exc 500 liters capacity complete all as directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and not exceeding 500 liters of capacity complete all as specified and directed.. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high from synthetic enamel paint.
S & F in repairs PVC flushing cistern push button / handle type of 10 ltr capacity , coloured including all fitting fixed with WC including PVC flush pipes ,brackets complete all as specified and directed.
S & F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and directed .
S & F in repair vitreous china squatting pan `Orissa ' pan pattern of size 580 mm x 440 mm white `P' or `S' trap front back inlet ( excluding flushing cistern and flush pipes) complete all as specified and directed.
S & F in repair vitreous china wash hand basin white size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.
M & L for cast iron floor trap with grating including jointing to waste pipes in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate for 75mm dia outlet complete all as specified and directed.
S&F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified and directed.
S&F in repair 75 mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors using sand cast CI pipes complete all as specified and directed.
Ditto all as per item No 44.00 here-in-before above but for 100 mm bore.
S&F 75 mm bore, cast iron bends of any radius.
S&F 100 mm bore, cast iron bends of any radius.
S&F in repair PVC internal kit for automatic syphonic action type low level flushing cistern of capacity 10 liters complete all as specified and directed.
S&F in repair lid for PVC tank for 500/1000 litr capacity of tank with complete arrangements complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.
S & F fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The lamination shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminatiobn shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete all as specified and directed.
S & F 30 mm thick fiberglass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP lamination all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified and directed.
S & F PVC hinges of 100 mm long complete all as specified and directed.
S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.
S & F 150 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.
Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces including screed bed, mud phuska, PCC, etc racking out joints, hacking for key scrubbing down with water etc, and removing rubbish out of MD land complete all as specified and directed.
M & L for 15 mm thick screed bed (average) plaster on concrete surfaces in CM 1:4 on roof, mixed with water proofing compound(@ 200 ml per bag of cement) and finishing the surface even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately under relevant item of Sch 'A; given here-in-after)
M & L for spreading / brushing neat cement slurry @ 3.00 Kg/ Sqm on old concrete surfaces complete all as specified and directed.
M & L PCC (1:2;4) type B-0 using 12.5 mm graded stone aggregate thickness as required at site) for padding concrete as on roof, mixed with water proofing compound (@200 ml per bag of cement) complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately under relevant item of Sch 'A; given here-in-after)
M & L for water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.50 Kg/ Sqm and providing 3 mm thick, APP modified water proofing membrane weighing not less than 3.50 Kg/Sqm reinforced with non-oven polyester fabric weighing not less than 160 gm /Sqm all as per detailed specifications, sealed with overlaps shall be with torch application and applying two coats of aluminium reflective paints complete all as specified and directed.
M & L for repair to chajja area not exceeding 2 sqm each including plaster in CM(1:3) or PCC type (1:2:4) B-0 using 12.5 mm stone aggregate on top with PC,benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.
M & L for repair to chajja area exceeding 2 Sqm and not exceeding 4 sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM(1:3) or PCC type B 0(1:2:4) (using 12.5 mm stone aggregate) on top with WPC, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.
M&L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) mix with liquid WPC (@ 200 ml per bay of cement) & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as specified and directed
M & L for cleaning of roofs by getting out growing vegetations / grass & brooming down with removing it out of MD land premises of including repairing to damaged surface of roof by using CM (1:3) mixed with WPC (@200 ml per bay of cement) & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sqm each complete all as specified and directed.
S & F in replacement 1.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S & F in replacement of 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L- type or J type hook bolts complete all as specified and directed.
M & L for 75 mm thick PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in plinth protection etc including finishing even & smooth without using extra cement complete all as specified and directed.
Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars complete all as specified and directed.
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., all as directed.
M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished fair and even without using extra cement and applying two coats of cement based paint after preparation of surfaces complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement and applying two coat of distemper oil emulsion over a coat of primer including average 1 mm thick wall care putty complete all as specified and as directed.
M&L for rendering 10 mm thick after dubbing out average 10 mm thick on irregular face of ceiling in CM (1:4) on ceiling, finished even and fair without using extra cement, including chicken wire mesh fixed with nails or screws etc and applying three coats of white wash on after preparation of surfaces complete all as specified and as directed.
S&F in repairs PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Ditto all as per item No 75.00 here-in-before but 75 mm dia.
S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.
Supply only liquid water proofing compound of approved make complete all as specified and directed.
S&F in repairs rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, ISI marked, hoisted & fixed in position complete all as specified and as directed.
SAXENA BANDHU
M/S SDS Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .