Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹9.5 L+₹66,208.65 (7.47%)Rejected-Finance 00 00 BAIRIYA NEAR KALI MAA MANDIR BALLIA UTTAR PRADESH 277502 | BALLIA | UTTAR PRADESH | 277502 | L2 | Rejected-Finance OTHER LOWEST BIDDER | |
| 3 | L3₹10.0 L+₹1.1 L (12.4%)Rejected-Finance | L3 | Rejected-Finance OTHER LOWEST BIDDER |
| Sl No | Description | Qty | Unit | Neha Enterprises L2 | MODI CORPORATION L1 | S.R ENGINEER WORKS L3 |
|---|---|---|---|---|---|---|
| 1.00Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline | ||||||
| 1.10 | Mannually excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe lines, cables, pipes etc in any type of soil and getting out complete all as specified and directed. | 201.69 | Cum | 100 ₹20,169 Lowest | 200 ₹40,338 | 140 ₹28,236.6 |
| 2.00 | Returning filling in, including spreading, leveling watering & well ramming in layers not exc 25 cm thick complete all as specified and directed. | 181.52 | Cum | 30 ₹5,445.6 Lowest | 120 ₹21,782.4 | 40 ₹7,260.8 |
| 3.00 | Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and diected. | 20.17 | Cum | 35 ₹705.95 Lowest | 150 ₹3,025.5 | 100 ₹2,017 |
| 4.00Relaying CI/DI pipe including fittings with spigot and socketed end/ flanged end, centrifugally cast laid in trenches after cleaning internally and externally, drawing out foreign material/ rust complete and jointing with and including new titon joints for fixing of pipe complete all as specified and directed for the following sizes:- Note :- (i) Earth work, joints and CI/DI specials/fittings of the pipes shall be measured and paid separately under appropriate item. | ||||||
| 4.01 | (a) 80 mm bore | 25 | RM | 40 ₹1,000 | 30 ₹750 Lowest | 130 ₹3,250 |
| 4.02 | (b) 100 mm bore | 10 | RM | 45 ₹450 | 40 ₹400 Lowest | 220 ₹2,200 |
| 4.03 | (c) 150 mm bore | 10 | RM | 90 ₹900 | 50 ₹500 Lowest | 350 ₹3,500 |
| 4.04 | (d) 200 mm bore | 10 | RM | 130 ₹1,300 | 70 ₹700 Lowest | 600 ₹6,000 |
| 5.00Relaying CI/DI pipe including fittings with spigot and socketed end/ flanged end, centrifugally cast laid in trenches after cleaning internally and externally, drawing out foreign material/ rust complete and jointing with and including new titon joints for fixing of pipe complete all as specified and directed for the following sizes:- Note :- (i) Earth work, joints and CI/DI specials/fittings of the pipes shall be measured and paid separately under appropriate item. | ||||||
Tender Value
₹11.7 L
EMD Value
₹23,500
Closing Date
3 Jan 2026, 6:00 pmClosed
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
SPECIAL REPAIR TO OLD RUSTED GI PIPE AND ITS ALLIED ITEMS OF CERTAIN LOCATION OF OTM ACCN OF 1 TB 2 TB 3 TB 4 TB AND PARADE GROUND OF 3 EME CENTRE UNDER GE BHOPAL
2025_MES_744258_1
8477/E8
Open Tender
Civil Works - Water Works
Item Rate
183 days
BHOPAL
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE BHOPAL
₹23,500
Yes
28 Feb 2026
12 Dec 2025
5 Jan 2026
12 Dec 2025
3 Jan 2026
26 Dec 2025
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe lines, cables, pipes etc in any type of soil and getting out complete all as specified and directed.
Returning filling in, including spreading, leveling watering & well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and diected.
Relaying CI pipe including fittings with spigot and socketed end/ flanged end, centrifugally cast laid in trenches after cleaning internally and externally, drawing out foreign material/ rust complete and jointing with and including new titon joints for fixing of pipe complete all as specified and directed for the following sizes:- Note :- (i) Earth work, joints and CI specials/fittings of the pipes shall be measured and paid separately under appropriate item.
(a) 80 mm bore
(b) 100 mm bore
(c) 150 mm bore
(d) 200 mm bore
Relaying CI pipe including fittings with spigot and socketed end/ flanged end, centrifugally cast laid in trenches after cleaning internally and externally, drawing out foreign material/ rust complete and jointing with and including new titon joints for fixing of pipe complete all as specified and directed for the following sizes:- Note :- (i) Earth work, joints and CI specials/fittings of the pipes shall be measured and paid separately under appropriate item.
(a) 80 mm bore
(b) 100 mm bore
(c) 150 mm bore
(d) 200 mm bore
S&F of pushon flexible rubber gasket (Tyton) joint complete all as specified and directed for following sizes:-
(a) 80 mm bore
(b) 100 mm bore
(c) 150 mm bore
(d) 200 mm bore
Cutting of cast iron pipes in position for insertion of new tees, branches, etc; comprising of two cuts complete all as specified and directed for the following sizes:-
(a) 80 mm bore
(b) 100 mm bore
(c) 150 mm bore
(d) 200 mm bore
S&F of CI/DI, bend (any type, radius and angle) tapers any type, straight bend including decreasing or double socket etc, Tee pieces single branch, 'Y' junction, all sockets or socket and spigot or flanged, collars, caps and plugs for spigot socketed pipes of upto 150 mm bore complete all as specified and directed.
S&F of CI/DI, bend (any type, radius and angle) tapers any type, (straight bend including decreasing or double socket etc) Tee pieces single branch, 'Y' junction, (all sockets or socket and spigot or flanged) collars, caps and plugs for spigot socketed pipes of 200 to 250 mm bore complete all as specified and directed.
M&L for cutting through existing PCC/ floor/ footpath of approx size 20cm width & 90cm depth as required for relaying of pipe or any other similar work and making good with PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) and matching with the existing surfaces complete all as specified and directed.
M&L for run lead joint for spigot and socketed end CI pipe & fittings including excavation, returning and refilling complete all as specified and directed for following sizes:-
(a) 80 mm bore
(b) 100 mm bore
(c) 150 mm bore
(d) 200 mm bore
M&L for cocking of run lead joint for spigot and socketed pipes and fittings including excavation, returning & refilling etc complete all as specified and directed of following sizes:-
(a) 80 mm bore
(b) 100 mm bore
(c) 150 mm bore
(d) 200 mm bore
M&L for mild steel framed work, made of angle iron, MS sheet etc. as required including welding, cutting, providing hinges, locking arrangments including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down existing steel tubing and connections with fittings complete all as specified and directed of following sizes:-
(a) 15 mm bore
(b) 20 mm bore
(c) 25 mm bore
(d) 40 mm bore
(e) 50 mm bore
(f) 80 mm bore
Relaying and refixing old retrieved steel tubing and connections in new or old position including cleaning internally and externally any grade/make, laid in trenches/ floor or fixed to walls with and including new fittings such as sockets, tee, union elbow etc complete all as specified and directed of follwing sizes:-
(a) 15 mm bore
(b) 20 mm bore
(c) 25 mm bore
(d) 40 mm bore
(e) 50 mm bore
(f) 80 mm bore
S&F of GI tubing, medium grade, ISI Marked in any length including cutting, threading, making connection in new or old position with and including and all type of GI new fittings for laid in trenches/wall/floor complete all as specified and directed of following sizes:-
(a) 15 mm bore
(b) 20 mm bore
(c) 25 mm bore
(d) 40 mm bore
(e) 50 mm bore
(f) 80 mm bore
Drilling and taping cast iron water mains (in position) for making branch connections complete all as specified and directed of following sizes:-
(a) 15 mm bore
(b) 20 mm bore
S&F in replacement gun metal globe or gate valves, confirming to IS: 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position complete all as specified and directed for following sizes:-
(a) 20 mm bore
(b) 25 mm bore
(c) 40 mm bore
(d) 50 mm bore
S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.
S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete all as specified and directed.
S&F in replacement 80 mm dia new cast iron flanged sluice valve of class PN 1.0, long body, ISI marked, confirming to IS-14846 with stainless steel spindle and hand wheel including nuts, bolts, rubber gasket for installation of valve complete all as specified and directed.
S&F in replacement new mechnical joints for DI type, K-9 including nuts, bolts and all connecting accessories complete all specified and directed for following sizes:-
(a) 80 mm bore
(b) 100 mm bore
(c) 150 mm bore
M&L for construction of valve pit chambers of size 600 x 600 x 900 mm (internal dimensions) for 50/ 80 mm dia sluice valve provided with 10 cm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation over 15 cm thick broken stone hard core, 23 cm thick brick walls built in cement mortar 1:4, 15 mm thick rendering plaster internally and externally upto 150 mm below GL in CM 1:3, finished even and smooth without using extra cement, 3 mm thick MS sheet cover with 40x40x6 mm MS angle frame all around and fixed in PCC 1:2:4 type B1, 50 mm thick coping with 25x6 mm flat iron hold fasts, hinges, handles, locking arrangements and applying 2 coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and 3 coats of white wash to internal surfaces of chamber including excavation and earth work in any type of soil and removing of surplus soil to a distance not exceeding 50 m complete all as specified and directed.
M&L for mild steel clamps of flat iron 50 x 4 mm and not less than 30 cm in length (02 Nos) for connection of 50 mm dia pipes with CI/ DI pipe including GI socket for fixing 50 mm dia pipe complete all as specified and directed.
M&L for mild steel clamps of flat iron 50 x 4 mm and not less than 30 cm in length (02 Nos) for connection of 40 mm dia pipes with CI/ DI pipe including GI socket for fixing 40 mm dia pipe complete all as specified and directed.
M&L for mild steel clamps of flat iron 50 x 4 mm and not less than 30 cm in length (02 Nos) for connection of 20/ 25 mm dia pipes with CI/ DI pipe including GI socket for fixing 20/ 25 mm dia pipe complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs.77615.00
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
TENDER_DOCU_8477.pdf
Tender Documents • 0.82 MB
CREDIT8477.pdf
Tender Documents • 0.17 MB
BOQ_833383.xls
BOQ • 0.97 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .