Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.6 LAccepted-AOC 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹49.1 L+₹42,357.20 (0.87%)Rejected-Finance HIG 37 GROUP 38 TAJNAGARI PHASE 1 AGRA 282001 CWE AGRA | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹49.9 L+₹1.2 L (2.44%)Rejected-Finance VILL NANDA KA NAGLA DHAOLI AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L3 | Rejected-Finance Being other than lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical Not admitted, verification not found uploaded |
| Sl No | Description | Qty | Unit | GIRENDRA SINGH AND CO L3 | J P CONTRACTORS AND SUPPLIERS L2 | Sethi Brothers L1 |
|---|---|---|---|---|---|---|
| 1.00 | M&L gunniting to RCC works in column, beams, slabs, landing, chhaja, balconies etc by removing loose concrete including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick to rusted steel reinforcement after removing/ cleaning all rust by sand/grit blasting and supply and fixing welded steel wire mesh 75mm x 75mm with 3mm dia steel wire as facies/drops and similar works etc and epoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with FOSROC NITOBOND SBR LATEX or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2.5 Kg/sqcm and applying 25mm thick layers of gunniting in cement mortar (1:2) using ordinary port land cement of 43 grade over wherever required complete all as specified and as directed. Note:- (i) Contractor should visit the site before quoting the price as Cost of dimentling and refixing of existing false ceiling including electrical fitting or any services is deemed to be included in quoted rate (ii) After placing the additional reinforcement all concrete surface shall be throughly scrubbing with brushed washed with water and allow dry and plaster complete all as specified. (ii) Work to be carried out as in patches as directed by Engr-in-charge. (iii) Rate for scaffolding ,15mm thick plaster in CM 1:4 deemed to be included in quoated rate. (iv) preparation of surface and applying two coat of OBD with one coat of primer over 1mm thick wall care putty, includin cleaning of entire room after completion of work deemed to be included in this item. Note:- Cost of ss wire mess and steel reinforcement will be paid separately. | 500 | Sqm | 1,500 ₹7,50,000 | 900 ₹4,50,000 Lowest | 900 ₹4,50,000 Lowest |
| 2.00 | M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed | 100 | KG | 85 ₹8,500 Lowest | 100 ₹10,000 | 85 ₹8,500 Lowest |
| 3.00 | M&L SS wire mess including binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed | 450 | KG | 85 ₹38,250 Lowest | 110 ₹49,500 | 100 ₹45,000 |
| 4.00 | Demolition of brick masonry built in cement mortar in cluding all quoins, arches, pillars etc complete all as specified and directed by Engr-in-charge. | 20 | Cum | 350 ₹7,000 | 100 ₹2,000 Lowest | 200 ₹4,000 |
| 5.00 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge. | 20 | Cum | 4,000 ₹80,000 | 3,500 ₹70,000 Lowest | 4,300 ₹86,000 |
| 6.00 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to a distance exc 1.5 Km but not exc 5.0 Km complete all as specified and directed | 500 | Sqm | 20 ₹10,000 Lowest | 50 ₹25,000 | 20 ₹10,000 Lowest |
| 7.00 | M&L for rendaring 15mm thick in cement mortar 1:4 on external wall using water proofing compound @ 3% by weight of cement or as per manufacture instruction on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement all as specified and as directed. (WPC shall be measured and paid seperatly) | 800 | Sqm | 150 ₹1,20,000 Lowest | 160 ₹1,28,000 | 170 ₹1,36,000 |
| 8.00 | M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , as per manufactures instructions etc complete all as specified and as directed. | 500 | Sqm | 80 ₹40,000 | 50 ₹25,000 Lowest | 55 ₹27,500 |
| 9.00 | M&L for preparation of new surface of walls (external surfaces) and applying Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camoflage pattern, as per manufactures instructions etc complete all as specified and as directed. | 400 | Sqm | 80 ₹32,000 | 45 ₹18,000 Lowest | 70 ₹28,000 |
| 10.00 | M&L for Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. | 800 | Sqm | 60 ₹48,000 | 40 ₹32,000 | 25 ₹20,000 Lowest |
Tender Value
₹48.4 L
EMD Value
₹96,800
Closing Date
5 Feb 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE TECH AREA AGRA
GE TECH AREA AGRA
SPECIAL REPAIR TO ROOF OF CERTAIN BUILDINGS AND CERTAIN B/R WORKS IN TECH AREA AT AF STN AGRA
2025_MES_743215_1
8200-1760/E8
Open Tender
Civil Works
Item Rate
180 days
AF TECH ATREA AGRA
Class D category a (i)
8 documents required · 8 mandatory
₹500
Yes
GE TECH AREA AGRA
₹96,800
Yes
17 Mar 2026
14 Jan 2026
10 Feb 2026
14 Jan 2026
5 Feb 2026
29 Jan 2026
M&L gunniting to RCC works in column, beams, slabs, landing, chhaja, balconies etc by removing loose concrete including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick to rusted steel reinforcement after removing/ cleaning all rust by sand/grit blasting and supply and fixing welded steel wire mesh 75mm x 75mm with 3mm dia steel wire as facies/drops and similar works etc and epoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with FOSROC NITOBOND SBR LATEX or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2.5 Kg/sqcm and applying 25mm thick layers of gunniting in cement mortar (1:2) using ordinary port land cement of 43 grade over wherever required complete all as specified and as directed. Note:- (i) Contractor should visit the site before quoting the price as Cost of dimentling and refixing of existing false ceiling including electrical fitting or any services is deemed to be included in quoted rate (ii) After placing the additional reinforcement all concrete surface shall be throughly scrubbing with brushed washed with water and allow dry and plaster complete all as specified. (ii) Work to be carried out as in patches as directed by Engr-in-charge. (iii) Rate for scaffolding ,15mm thick plaster in CM 1:4 deemed to be included in quoated rate. (iv) preparation of surface and applying two coat of OBD with one coat of primer over 1mm thick wall care putty, includin cleaning of entire room after completion of work deemed to be included in this item. Note:- Cost of ss wire mess and steel reinforcement will be paid separately.
n8.M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directedM&L SS wire mess including binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directedTaking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to a distance exc 1.5 Km but not exc 5.0 Km complete all as specified and directed¶M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggegate) (average 50 mm thickness) as in levelling course / padding over roof complete all as specified and directed§M&L for glass fiber mesh of 2.5mm x 2.5mm, thickness of the material should not be less than 1mm or as specified by manufacturercomplete all as specified and directed.úM&L for preparation of roof surface and application of Dr fixit roofseal first coat of prime seal with 50% dilution, adequate time for drying. 1st coat of Dr fixit roof seal ultra undiluted / FOSROC or other equilent as approved by the GE. A glass fiber mesh of 2.5mm x 2.5mm needs to be sandwiched between the first coat and second coats. Then 2nd coat of Dr fixit roof seal ultra / FOSROC or other equilent as approved by the GE is applied to the firs
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , as per manufactures instructions etc complete all as specified and as directed.
M&L for preparation of new surface of walls (external surfaces) and applying Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camoflage pattern, as per manufactures instructions etc complete all as specified and as directed.
M&L for Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.
Dismantling of existing roof treatmentof any type description incuding tarfelt/cement plaster etc from roof surfaces including cleaning the surface and removing the debris from site complete all as specified & directed.
M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and as directed.
M&L for cleaning surfaces and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm including cleaning surface complete all as specified & directed.
SCHEDULE OF CREDIT
1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB
2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on "Schedule of credit" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount.
3. The total credit amount may vary as per execution of work above different items involved in this credit schedule.
4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified.
5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained
Srl No
Rate in (Rs)
Brick bats
Total amount of credit schedule
Signature of contractor
For ACCEPTING OFFICER
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Tender1760.pdf
Tender Documents • 1.62 MB
BOQ_837492.xls
BOQ • 1.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .